New Boiler Installation - Cylinder Removal - Step by Step - Leeds Plumber

#Plumber New Boiler Leeds cchleeds.co.uk...
New Gas Boiler. Take out and old open vent heating system. Flush all the radiators. Install a new boiler. Run a new condensate pipe and protect with Condensate Pro. Install an SpiroTech Spiro Vent RV2. Installing a Fernox Omega Filter. EPH Combi Pack 4 control. Scale inhibitor. Full central heating powerflush. Using fernox f3 and f1.
Plumber installing a New Boiler in Leeds Plumber boiler installation
Step by step boiler installation video boiler installation guide
boiler installation procedure boiler installation. Powerflush a central heating system

[@AllenHart999]

If you are training to be a Plumber / Gas Engineer come and join our group for a chance to win prizes and tools. facebook.com/groups/Gas999/

[@shafiander365]

Hi Allen I would like to become a gas engineer but I don’t know where I can do my training course I live in south west London. I don’t have any background plumbing. Did my house of new shower rooms and toilet also I did for my girlfriends house tiling in new toilet house. I need your advice thank you

[@paulburton1183]

Allen just watched your video and noticed when the electrician was talking about his test it looked like the gas meter had no bracket yet it had an anaconda feeding it to the ecv and lead off the out let did you remove the lead for fixed pipework as per regs ?

[@AllenHart999]

@@paulburton1183 Where does it say that in the regs?

[@AllenHart999]

@@paulburton1183 I actually have the regulations here.

[@paulburton1183]

@@AllenHart999 Allen apologies its In bs6400 clause 8.2.7.2 so it's not a regulation its advisory so my apologies It says that a meter shall be supported so as to restrict movement and I was not being funny but an anaconda and a lead outlet dose not restrict movement just my opinion did not mean to offend I just remove the lead and repipe with rigid pipework if I come across a meter with no bracket Kind regards

[@ianbarnes1573]

Thank you for your inspirational video. Having completed 24 years military service at the age of 45. (Still fit and healthy, have another 60 years in me!) This is my resettlement training choice. Gas Safe registration once complete will be a fantastic achievement and I hope, will provide a foundation for entry level employment and a bright future in the civilian world. Where I can still contribute to society and hopefully supplement my military pension. Thank you once again!

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@pmoney523]

u can drop dead any second, hour, day, week year, this life is only a test, turn to allah..

[@janoswimmer1042]

I loved the drawing at 42:40 :) But seriously, stop saying sorry because of your drawing. You helps us beginners a lot. your videos are gold. Thank you

[@AllenHart999]

Thank you for watching

[@monkeyboy8424]

Excellent presentation. Allen is a true professional and sets the standard to which all tradesmen/women should aspire.

[@paultabor2446]

I am not plumber but as a mechanical engineer it is a very good video for all apprentices,

[@AllenHart999]

Thank You.

[@paulstevens5329]

This is a excellent installation, customers should watch a video like this to see why you have to pay more for a proper job....a £1200 conversion is £1200 for a reason

[@AllenHart999]

Thank You.

[@jayendraamlani861]

A very nice video.As a retired engineer I enjoy watching your videos.Very thorough.😊😊

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@heatpump8566]

This is a fantastic installation from start to finish. From the first minute when you see the carpet covered to commission. Great job,this is how boilers should be fitted

[@AllenHart999]

Thank you very much!

[@krazykoala7329]

Cheers Allen, im 16 years old and an apprentice. i reckon beacuse im a girl the lads i work with aren't explaining things properly since they favour the other male apprentice so this is really helpful, thanks again!

[@DavidSmith-zs5br]

This is a excellent video for newly qualified engineers like myself. Explained perfectly without being too over technical. Thanks Allen .. Great Job

[@AllenHart999]

Thank you so much for your kind words.

[@raymondparker5126]

Another great job, Allen. The homeowners will be delighted.... That's a nice job you and the boys have done.

[@AllenHart999]

Thanks 👍

[@garyredfern2542]

Great video Alan. Doesn't matter how long your videos are. It's the information that matters. 👍👍

[@yourmomlol9435]

God bless you Allen . Giving away great information for free. I pray God continues to bless you.

[@matttate9155]

You colour coded your pipe clips! You are such a nerd. I love it!!!

[@AllenHart999]

That wasn’t my doing to be honest. The guy that was with me did it. lol.

[@simonhelps302]

On the system removed if the coil in the cylinder pin-holed the primary water could contaminate the CWSC. Great videos Allen.

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@steveincork3669]

Sad fond memories of fitting those Potterton Profiles Prima f's Suprimas and all the fans pcbs that I fitted in them for years after. Great video Alan👍😀

[@AllenHart999]

Thank You

[@keithbrueton]

Your a top geezer Allen keep them comming . Im teaching my Grandson the trade he is at college taking his part 2 plumbing

[@AllenHart999]

Thanks.

[@edcooper2396]

Can't believe Spirotech would get funny about you cutting up one of their products. I work in product development and we always get hold of our competitors products and analyse them in great detail.

[@AllenHart999]

kzbin.info/www/bejne/o4qaZKifqcqbjqs

[@syedhiballah3514]

Ohhh 😮 mate the piping is crazy

[@AllenHart999]

Thank You

[@callumteevan9268]

I’m an apprentice that does Installs all the time and I can never get my head around how the fellas I work with do it, this video was really useful for me. Thanks Allen! Hope you are staying safe!

[@AllenHart999]

Happy to help. Thanks for watching.

[@ivangoodall1]

Hi Allen, super video as usual, which I have watched right until the end. It would be useful to see what you do when/before quoting for a boiler....for example attending the property checking water flow rates, gas pressure/flow checks location of boiler etc etc. Thanks again and take care. Ivan

[@jimclisham4000]

Great video 👍....the flue and condensate pipe were blended in nicely with existing outside wall

[@AllenHart999]

Thanks 👍

[@joshuaturner7671]

Absolutely superb again Allen. Credit to the industry

[@AllenHart999]

You are very kind. Thank you.

[@chriscars3578]

Fantastic video again Allen great job

[@AllenHart999]

Thank You Chris

[@ukoutdoors6111]

a good tip Allen is when servicing these boilers and others like them, I find it good to have a squirt of leak detection fluid on the main burner seal, You would be surprised how many bubble!

[@martinshaw8494]

Allan I'm not a boiler but I'm clued up with it and I work in the building trade and your videos are very well explained really inspirational take me bk when I left school my work experience was plumbing always wanted be one I would of loved to have an apprenticeship with you fair play mate very well explained

[@chikemadekwe4342]

Good vidz mate, I'm getting back into plumbing after six years and only watching yours. Again, good work keep it up.

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@loveofkemet]

Love your content mate. Have to say you cannot 'upgrade' from a cylinder to a combi, that's a regression in most cases 🙂

[@liberatodelgreco4430]

Excellent video, Permier League, absolutely agree with your choice of a Combi.

[@AllenHart999]

Thank you so much.

[@davidgorrie7606]

lovelly jubbly job allen brilliant to see done every bit carried out p[rofessionally from cementing of flue to fill in space from old flue diameter to even putting plastic black condensate bracket over connsate protective inulation , great to see, id like to ask allen who inspects your work ,? ha ha ha i remember ghas inspectors jamie tenant edinburgh etc could turn up on any occassion un expected but usually booked 3 jobs that youve done , good man was mr tenent great bloke always gave advice and made sure you gave correct answers he wouldnt fail you unless you were really really bad top man ,

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@leonardbalint4930]

Thanks Alan for this video!

[@zubizarus]

Hi Alan and thanks for the great work, I've been watching your videos for quite some time and always get back if in doubt of something, I'm doing more or less the same steps as you've shown here. The one thing I haven't installed so far would be the RV2 Air Separator, maybe sometime in the future. Thanks again and keep up these very informative videos!

[@davidoshea1536]

Brilliant video Allen 🔥, superbly explained and very informative, especially your reasoning for installing the combi boiler. Looking forward to seeing the next video 🌟👊

[@Papa_Kilo]

Another excellent informative video, I'll be calling you when I need a boiler replacement

[@AllenHart999]

Paul K Thank you very much Paul.

[@mohammedmussa8190]

Great job as usual Last year I was watching your videos at college with whole class 👍👍

[@AllenHart999]

Get them all to join the training group. facebook.com/groups/Gas999/

[@mohammedmussa8190]

I will

[@robinwilson4397]

Fanatic info-shame your up north - I’m in Devon ! A great place to start for our boiler replacement.Many thanks.

[@AllenHart999]

Robin Wilson we are looking for a move soon😃😀😀 maybe Devon. Give Elliot a call from E Fry Gas Services

[@LdaHashZero]

That pipework is beautiful.

[@Pytho_n]

Hi Alan, been watching your videos for a while and did my research in getting a new combi boiler installed. We also had a gravity-fed system with tanks in the bedroom and loft. Now we have an Ideal Atlantic 30kw and it's great. No more waiting for hot water and most importantly wasting expensive gas.

[@markcleminson4107]

Fantastic install and another very good video Allen. Love watching your you tube videos and learn so much. Don’t bother with the tv anymore! Keep up the good work!

[@AllenHart999]

Thank you so much for the kind words.

[@garlic1558]

I watched it to the end Very interesting Amazing workmanship

[@AllenHart999]

Thank you so much. Are you a gas engineer or plumber? Thanks.

[@garlic1558]

@@AllenHart999 gas engineer who needs improve his plumbing skills

[@AllenHart999]

@@garlic1558 Fantastic, These videos are aimed for you. If you need any help let me know. Thanks.

[@garlic1558]

@@AllenHart999 What do you use to seal the flue? Only sand and cement or you use something else to fill the cavity?

[@viaphone8354]

Thanks for taking the time to explane

[@rikileaksplumbing5642]

Thanks Allen this is just gold ! I am learning so so much

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@rally80uk]

No way its Pete who trained me at BG academy in Leeds. Top bloke 👏

[@AllenHart999]

Pete is my best mate, we both started BG on the same day

[@rally80uk]

@@AllenHart999 tell him I said hi and thanks for all the help he gave me. 👍

[@rally80uk]

By the way I find your videos very informative. Keep up the good work 👏

[@AllenHart999]

David Ralphson He will be back on here again soon. 👍

[@AllenHart999]

@@rally80uk Thank you so much.

[@456Brian]

What a fantastic job you do a top tradesman a credit to your industry and happy Christmas to you and your family

[@AllenHart999]

Thank you very much!

[@AllenHart999]

Happy Christmas

[@rayzeish]

Good one Allen.

[@AllenHart999]

Thank you kindly

[@ratchriat1716]

top work Allen nice clean installation.

[@AllenHart999]

Thank you.

[@quadrantheatingelectricspl2907]

Top notch again 👍😋😉😊

[@AllenHart999]

Thank You.

[@kornelk.9417]

Absolutely lovely job Allen

[@AllenHart999]

Thank you.

[@mikeystyz]

Thanks for these great tutorials Allen , learning the correct way

[@kudospremier7415]

I loved it seriuosly both the explanation for the electric and boiler was brilliant

[@AllenHart999]

Thanks

[@richardhodgson7443]

Allen this video is superb mate, really detailed and informative. Best yet thanks for all the help 👍

[@AllenHart999]

Hope you are well Richard. Thanks for the support. Who will win the Wera lol

[@richardhodgson7443]

Allen Hart haha.. blinking hope it’s me 😂😂 all good mate, look forward to our next video together, install next 😉 and bring on September, go easy Allen catch up soon I hope

[@AllenHart999]

@@richardhodgson7443 I have a big pile of free stuff here for competitions now. You will have plenty of chances.

[@richardhodgson7443]

Allen Hart sounds good to me 👌

[@stevelee838]

Allen, Great Job and Video! I would use your services with no hesistation at all.

[@AllenHart999]

I appreciate that!

[@zabiabdulhady7408]

Thanks very much Allan, your videos are very helpful

[@AllenHart999]

You are very welcome

[@mikegallagher2107]

really good content allen every day can be a school day as there is always someone or something crops up and deal with it there and then i suppose to a certain degree there is no right or wrong way but the end result is the same

[@AllenHart999]

I love doing these videos and showing what I do. We can all learn as you say. I am always happy to listen if someone tells me I am wrong. Thanks.

[@jasonmiller7941]

Great video Allen. Your down to earth instruction and easy going manner make watching and learning from you a joy. Can you do a video where you change a boiler from ov to a sealed pressurised system. That would be great thank you.

[@AllenHart999]

Jason Miller This one was open vent, Then it went to sealed, Do you want something else? Thanks

[@jasonmiller7941]

@@AllenHart999 thanks for the reply mate. I was after an install that has had a new boiler installed and converted to sealed. Still has the cylinder on ov just the heating side pressurised.

[@loafersheffield]

I watched the entire video, but I watched it in three sessions as I have

[@loafersheffield]

a short

[@loafersheffield]

short attention span

[@AllenHart999]

You must try harder 😂😂😂😂

[@kevonbennett5210]

Sir Allen I've been watching your videos for sometime now. Never ever realised that I didn't subscribe. 👍

[@kevinblackhurst5408]

Brilliant video allan 👍 keep up the good work 🙌

[@AllenHart999]

Thank You

[@johnboy1232]

Great job Alan ,so many cowboys about these days . Did have a look at that air separator. Think it's curing a problem that does not exist on pressure systems ,If a pressure system that has been correctly installed and commissioned is giving up air constantly then it probably has a leak somewhere . I always thought it unnecessary for boilers to have auto air vents which are problematical as well .The Dutch boiler manufacturer Intergas just had a manual vent placed at the top of the boiler which worked fine .Have you come across them only 4 moving parts The water heats via a coil similar to the instantaneous multi point water heaters of old . I watched the video to the end also The best always cost s bit more but most of the time it's money well spent!

[@AllenHart999]

They are definitely interesting. I will do a video in a year or so when I go back and test. Thanks.

[@Tandy683]

Excellent video again allen regards from mark in swansea👍

[@sebastianharridge171]

Super video loads of info love it. Thanks

[@Smart_fix]

Absolutely informative video and helpful I learnt a lot and I would call you Allen Heart ❤️ because your are genius 👍🏼🙂💐❤️❤️❤️💐

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@Smart_fix]

I have done it long time ago Allen 🙂 ❤️💐👍🏼

[@stephenrobinson5941]

Great video Allen,well done lads .

[@AllenHart999]

Thank you.

[@AhmedAhmed-zj4zd]

Thanks a lot alllen

[@AllenHart999]

You are welcome

[@lemonkeyconvertible848]

great video well explained

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@deepakparmar2717]

Excellent thanks 😊

[@davidmcdowell340]

Great job Allen,absolute inspiration.

[@AllenHart999]

Thank you so much.

[@viratpatel375]

I watched the full video lol. Very helpful and many thanks Allan

[@AllenHart999]

Glad it was helpful! Thank You so much for supporting my channel.

[@kevind7150]

If you are installing an unvented cylinder above the highest outlet on the system. You should install, an anti-vac valve. Some Worcester cylinders have them incorporated on the combination valve. The cylinder can implode, due to siphonage. as your man stated. The valve should be installed on the outlet pipe. Allowing air to enter the system. This disrupts the siphoning. Due to negative pressure in the cylinder. The anti-vac valve opens, enabling air to enter, the system. I hope this info makes sense?

[@AllenHart999]

👍👍👍👍

[@kevind7150]

@@AllenHart999 Hi Allen, this message, was meant for one of your other posts. The one regarding the unvented cylinder, that had imploded. Due to insufficient water supply. It must have jump. As your video ended. Sorry if you found it confusing!

[@haroldlowther]

brilliant vid

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@sydsyd]

Great installation. Very detailed.

[@AllenHart999]

Thank you so much.

[@faridratni6799]

This excellent video I wish in future to show us how did you linked flow and return when you did remove a cylinder and how you did linked water main with others pipe

[@AllenHart999]

Already done a video on that. Thanks. kzbin.info/www/bejne/mp6xc4eqqNhpqsk

[@lemonkeyconvertible848]

great video you are a star

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@rickysheldon4355]

As always awesome

[@sukbajwa]

Thanks for the video Allen

[@AllenHart999]

My pleasure!!

[@zjzozn]

Nice vlog 🤟

[@AllenHart999]

Thank You

[@michaelorourke3997]

Yes I watched it until the end, another great video. I'm not complaining but maybe a little concerned, with your work during the day the videos in the evening, your mobile hoping, when do you sleep????

[@AllenHart999]

Thank you for your concern.

[@jackhoskins722]

Cheers Alan great video as always

[@AllenHart999]

Glad you enjoyed it

[@brendanfisher2528]

Could you not just put a heat trace down the condensate with out door temp sensor? Surely it would work aswell if not better than that expensive lagging you use and the kit you need for it.. You always do a quality REAL WORLD job (unlike the polished pipe jobs people post) Keep up the good work and stay safe.. Bradford

[@AllenHart999]

Wouldn’t need a trace heater on this one. We always need to lag them no matter what. Thanks.

[@ahmaddarwiche9154]

Hi Allen good job clean and neat

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@campervanjimbob3764]

BRILLIANT thanks

[@AllenHart999]

Thank You

[@tannoy6155]

We always try to reduce the ammount of pipes that need to run on the outside of the house, ( cosmetic reasons along with practical ) especially the condense pipe due to possible freeze and boiler shut down, there is always somewhere to run it internally

[@AllenHart999]

Absolutely. Thanks for sharing

[@harrys9968]

Great job mate 👍

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@7dayplumbingservices195]

Excellent video thanks Allen 👍 can you do video on quoting sometime please . I have been asked to quote for plumbing and heating on an extension. 2 bathroom 1 utility 1 toilet 1 kitchen plumbing 1 boiler 7 extra rads . I don’t have a clue where to start . Any tips ?

[@AllenHart999]

Great suggestion!

[@7dayplumbingservices195]

Do you think i could raise the question on gas chat? Or am i going to get S**T

[@AllenHart999]

@@7dayplumbingservices195 You might be better on here facebook.com/groups/Gas999/

[@7dayplumbingservices195]

Thanks Allen will give that a go , have a great day

[@darranhusaen156]

Thanks for this amazing video ;)

[@AllenHart999]

Please like and share. Thanks for watching.

[@tomhilditch3882]

You dont need to mains Feed a Combination boiler, i often keep the CWST and fit a pump, then the customer can have better flow and pressure

[@spencerwilton5831]

Detest combi boilers! Give me a tank any day. Modern pressurised cylinders are in another league to any miserable combi, both in terms of performance and overall user experience. Fortunately many developers finally seem to understand that combis are not great in family homes and are installing megaflo type systems now. Sadly, too many homeowners don't realise the drawbacks of combis until it's too late and the things are already installed. Every single property I have owned or lived in with a combi has had issues with it. Needless to say I rip them out now as a priority when doing a refurb.

[@AllenHart999]

Thanks for your opinion.

[@darrenrichards4840]

So let me get this right, you doing a refurb right and the young lad working with you says, hey boss there's a brand new Vitodens 200-W in the airing cupboard and you reply... Get that dirty stinking combi boiler on the skip now... But boss it's brand new... I don't care if it's gold plated son, it's a combi, skip NOW 😂

[@harrygarbett3089]

Hiya Allen. How do you work out how much expansion is required in a heating system. As in do they spec in boiler manufacturers instructions how much there ev can cope with. Is it square literage as would you measure that beforehand. You could put so many gadgets on couldn’t you descaler , magnet. Mini shock arrester cold water filter. External expansion vessel. Ever fit them all. I love the idea with full ball iso valves on pipes to. 👍 😊. Harry.

[@harrygarbett3089]

Also. Is that a Nordstrom power flusher. Do they all come with the magnets built in. 👍. So cool.

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@accesszero4803]

Love the omega filter , was gutted when ideal stopped using them , dont trust spiratec as far as i can throw them, used loads of them years ago until i worked out they were crap ,no idea why vaillant use them

[@AllenHart999]

It’s all about the money. Really is a shame though.

[@andythomas5265]

Great improvement, but should we really still be swapping out hot water tank systems for combis when heat pumps are the future, in 5-10 years you'll be putting a tank back in?

[@wrenlfc]

The vent in pushfit 😭😭😂 my eyes 👀 😂🤦‍♂️ good video but there are some cowboys out there

[@kudospremier7415]

10.20 i thought you was going to say you putthe copper in the van you cut out 🤣

[@AllenHart999]

Thanks for watching. Enjoy your weekend

[@welshraven4136]

Hi I've just started watching your video's, I'm due to have my gas fire back boiler replaced for a combi in the coming weeks. I'm so worried about this because the hot water tank is in the living room and obviously the boiler will have to be relocated, and as I live here and can't move out I just overwhelmed by the thought of the work moving my belongings around. Anyway great video's.

[@darrenrichards4840]

Is there an advantage to using 22mm tee with end cap on the flow and return? I always use 22mm - 15mm drain off and connect to that. I guess advantage with the 22mm tee used in this video is that you can then use 22mm hose when flushing? Anyone got view on this finer point of installation in this vid. Great and informative video BTW. Cheers.

[@marcusjones1563]

great video. Really informative, Would there be any difference with an oil boiler ?

[@rodrigoms75]

Great video, well done. What is the name of that part that cover/isulate the flue pipe? 26:40 is it a flue liner? Or should I use a superfoil pipe wrap? And then decorate arround with plasterboard...

[@johnh10000]

Sir being a formally qualified spark, I worked regularly with a plumber, who taught me a lot about your game. He didn't have a gas sniffer. But you appear to have a water sniffer. Do you know how these bits of kit work? Great videos btw. ( I got sick, so had to retire)

[@AllenHart999]

Thanks for watching.

[@johnh10000]

@@AllenHart999 I'm from Leeds, good news las week!

[@tommytanswell4187]

Love ya big al

[@AllenHart999]

Thank you.

[@georgedumitrescu9473]

Another brilliant presentation from Allen and his team. Could you please let me know what tool and what brand you use for cold fitting by pressure. Thank you

[@Hartevar0]

I love the videos Hart evan113