Autotech High Pressure Fuel Pump Kit Install - 2.0 TFSI EA888.3

How to install the Autotech High Pressure Fuel Pump Kit on MQB 2.0 TFSI EA888.3 | S3 8V / Golf 7 GTI - R / TT 8S / Leon 3 Cupra...
By All Stars Motorsport
Link to product:
www.all-stars-motorsport.com/...

[@nicolomarchillo4451]

Super good use of the flathead and closed end of the wrench for the spring. I knew I didn’t need a hydraulic press and a bearing puller for this job lol

[@RedEyedJedi]

I have that metal line attached to my hpfp and I need to remove my valve cover so I can change the gasket sealant. I was hoping that nut would pull away from the metal line because the other half is connected under the intake manifold and I really didn't want to remove that too. Thanks so much for this video.

[@oshane2513]

This video is well put together

[@albertterrazas1992]

What's that other hose on the side my gti don't have that hose on my hpfp

[@fredbikers]

Thank you very much

[@Di-Mit]

Je suis en stage 2 sans hpfp.faut il retoucher la map apres cette installation ?

[@allstarsmotorsport]

Si vous n'avez pas de pompe HP, alors le stage 2 a été obligatoirement limité par le mappeur. Après le montage, l'interet sera justement de revoir la carto pour aller chercher 25-30cv en stage 2+

[@Di-Mit]

@@allstarsmotorsport je peux avoir 25-30cv supplementaire avec le kit autotech ?

[@andrewsmith2502]

does this upgrade require a tune?

[@charliemeyer7912]

No custom tune required unless your looking to run E

[@drsnowmon]

You need to reflash your tune to specific fuel like e50, e85, etc

[@TheLudbe]

@@charliemeyer7912 not true..it need tune..because every stroke pump pumps more fuel as with ori piston...u need tune it otherwise u can have rail pressure issues

[@charliemeyer7912]

@@TheLudbe you can run it without a tune though you may run into issues you may not

[@TheLudbe]

@@charliemeyer7912 if u log rail pressue and fuel trims u will see why it must have tune after changing pump!

[@elizalde2455]

Préndelo