Pro tip, clean the outside of the pump before pulling it apart. Also, if you don’t want to use a bearing puller, put a magnet through a socket that fits on top the the retainer then push down the on the spring, the magnet will pull the retaining clips out.
@vrtah84882 жыл бұрын
“My wife breaks a nail as soon as she walks into the garage” I’m dead lol
@wyvern35253 жыл бұрын
Thanks so much! this really helped a ton! The amount of detail and step by step process made this the best car install video i've even seen. Keep the content coming i can't wait to get my EQT stage 2 e85 tune on my car now xD
@mikemensinger57636 ай бұрын
Thank you for this video, it helped me a lot, and I got my HPFP installed. Right on!
@drsnowmon2 жыл бұрын
Details in this video was so satisfying
@t3rr0rdactyl2 жыл бұрын
I dealt with those little seals (or at least very similar) when helping a buddy do his valve stems on his c6 vette. Glad I'll have "some" experience going into this lol. Nice write up
@petermcdonald7380 Жыл бұрын
Thank you! Was going to pay to have this done. But because you showed the tool kit from Amazon was so cheap. I did it myself.
@sparky89013 жыл бұрын
Thanks a lot you really helped me, even provided the torque specs for the M10 bolts on the housing. I broke my stock retainer trying to remove it with my bearing separator. Luckily my press got it out!
@dylanlautt78732 жыл бұрын
Thank you so much for this detailed video! I did this install today on my gti and it couldn’t have went smoother thanks to your video
@Dasher498Ай бұрын
Great video, thanks OP!
@arob_1575 ай бұрын
Thanks for the video. Helped out with my install.
@bosspanda61952 жыл бұрын
Bearing splitter kit lol i didn't know the name and ive been looking for it thanks for the vid
@ghostbuster1873 жыл бұрын
Great detailed video. I just got done doing mine the same way a little while ago and wish this was out then 😂
@midnightmodgarage77402 жыл бұрын
Hey CPO. Thank you for the awesome tutorial. Just did one of my own amd gave you a shoutout. Keep up the awesome vids.
@ForRJ3 жыл бұрын
Great video, I had mine done by OstarMotorsports while doing some maintenance, didn’t cost me too much, you need to do some 0-60 after the full E85, I spun all first gear and still manage to do a 3.6s on 80 degrees, while doing 3.8s with no spin on E30 on my heavier S3, I do run the stratified dsg instead of the Eqt because the lower rpms LC I keep getting more consistent results, plus I like it much better on D mode.
@jerrydont2 жыл бұрын
This was amazingly helpful, thank you so much!
@dirk59503 жыл бұрын
I've done a couple of these. Excellent video.
@Deane5973 жыл бұрын
This is so nice and detailed !! Thank you !
@KXP702 жыл бұрын
Fantastic video, thank you!
@diegorodri193 жыл бұрын
Awesome & clean install
@alltheboost8012 жыл бұрын
Beautiful work and great video! Seems like you’ve made quite a few mods, what’s your next mod? And are you thinking of selling your car anytime soon?
@kennyq458 ай бұрын
Thanks for sharing 💪🏾
@MrWilliamathomasusa2 жыл бұрын
🟩🟩🟩 God… What a fantastic useful video… I have a M7.5 R… Love ❤️ the car… Thanks for your time…
@haku1073 жыл бұрын
Where were you on Friday 😩 I took it out and couldn’t get the spring to depress so I just gave up and installed back in. But with this video I’m gonna try to redo it when the tools come in and see how my luck goes 👍🏽 thanks for your great video man
@EVERYTHINGcpo3 жыл бұрын
friday... I was filming this video! lol Glad you are going to try it again!
@haku1073 жыл бұрын
@@EVERYTHINGcpo so I bought the clamps you suggested and I understand how to punch them closed with the tool but how do you loosen it if you need to clean and or repair something in the hpfp?
@EVERYTHINGcpo3 жыл бұрын
@@haku107 you need to cut them off and put on a new one. They are not re-useable. Cut the ear with a pair of side cutters.
@justincharlebois3 жыл бұрын
Great video 🙌
@GTiz4Ever3 жыл бұрын
Another great vid. 1 question, My MK7 R is EQT Stage 2. Will this modification require an adjustment to the custom tune to recognize its full potential? I am not running E85 fuel. Any thoughts is appreciated.
@brandonpena35162 жыл бұрын
Can I use the regular clamp, like the ones on the intake but smaller size?
@jy3406 Жыл бұрын
Hi! Great video. I am considering this upgrade since the oem one is limiting my tune to 380hp. However the 50% more wear on the camshaft is where I'm considering if I actually need more hp or not. What is your experience with the car after this upgrade? Any issues or potential worries? Thanks a lot!
@DelmaMadras10 күн бұрын
262 Gislason Islands
@anthonywillard14772 жыл бұрын
So Installed this and now I'm getting a p229400 do you know what could cause that. It wasn't doing it before
@ewaldfernandes73272 жыл бұрын
Great how to! Kudus!
@yaboidog549918 сағат бұрын
Hey man ik im 3 years late but I have a mk7 gti with is38 burble tune if I install the hpfp will I need another tune if I still plan on pumping 93 for the present
@EVERYTHINGcpo2 сағат бұрын
@@yaboidog5499 yes. You’ll need a tune to properly scale the increased fuel pressures
@gideonyoun2 жыл бұрын
while cranking down on the center punch, does it damage the oem pump shaft? If I ever want to go back to stock, will I be able to reuse the original pump shaft?
@pnb17001 Жыл бұрын
What Ethanol sensor and gauge is that?
@xxthe_remedyxx52962 жыл бұрын
I have a 2018 S3 currently running Stage 1 93 EQT. Can I do the same with the internals for my pump?
@waquishaholmes3622 жыл бұрын
Yes
@knduong2 жыл бұрын
Can you install the internals and run without a tune?
@EVERYTHINGcpo2 жыл бұрын
No. You should have a tune.
@knduong2 жыл бұрын
@@EVERYTHINGcpo say I was already tuned stage 2+ but wanted to upgrade the pump
@onelowvdub Жыл бұрын
"make sure your shaft is all the way up "
@angelj74195 ай бұрын
Is autotech internals still the go to? I keep reading mixed reviews.
@EVERYTHINGcpo5 ай бұрын
If care is taken during install I see nothing wrong with them. I have yet to have any issues with mine.
@SilentEffects2 жыл бұрын
The bearing kit listed is unavailable, is it just a 2 inch puller? That I could order on Amazon
@EVERYTHINGcpo2 жыл бұрын
I don’t know what size other than “mini”. I would imagine any of the sets that have a small one would probably work. I know some of them are large and that would not work too well.
@nicknachos13 жыл бұрын
So to run full E85 on the MK7 Golf R you need an upgraded HPFP? What else would I need?
@EVERYTHINGcpo3 жыл бұрын
On the R, that’s it.
@JacesOwnWorld2 жыл бұрын
Well, looks like all the puller kits on Amazon have recently had a “COVID” markup of 100%! So dumb. Harbor Freight ftw once again…
@EVERYTHINGcpo2 жыл бұрын
Ugh
@b58.soupra Жыл бұрын
silly question, but what kind of oil did you use to lube it with?
@EVERYTHINGcpo Жыл бұрын
I have no idea. Whatever was nearby. It’s only for the initial start up…
@poyo35822 жыл бұрын
Would I have to replace the bolts for the hpfp?
@EVERYTHINGcpo2 жыл бұрын
Technically, yes. Most people see no impact from re-using them once.
@tsras19792 жыл бұрын
Hey How did you check if the HPFP is working properly?
@EVERYTHINGcpo2 жыл бұрын
If it’s not working properly you’ll likely know pretty quick. Massive fuel cuts at wot. But the best way is look for the increase in rail pressure psi in the logs.
@tsras19792 жыл бұрын
ok so I did good then haha. Thanks again!
@jacoballen58373 жыл бұрын
You don’t need a tune necessarily they claim 5% power increase on stock map I believe
@daydream28183 жыл бұрын
Im installing today , how has it been so far ? Any issues?
@EVERYTHINGcpo3 жыл бұрын
Runs like a champ!
@daydream28183 жыл бұрын
@@EVERYTHINGcpo what size key do i need for the brass fitting , the lower fuel Line?
@daydream28183 жыл бұрын
I meant the hard line fitting
@EVERYTHINGcpo3 жыл бұрын
@@daydream2818 17mm
@daydream28183 жыл бұрын
@@EVERYTHINGcpo i have ie i can only flash at home , should i pump ethanol then drive home and flash the ecu or the apposite? Gas station is 5 minutes away! Thank u btw? I was thinking maybe fill up a gallon and just bring it home , what would u say