DETAILED Autotech HPFP Internals Install MK7 GOlf R or GTI

[@JordieG8]

Pro tip, clean the outside of the pump before pulling it apart. Also, if you don’t want to use a bearing puller, put a magnet through a socket that fits on top the the retainer then push down the on the spring, the magnet will pull the retaining clips out.

[@vrtah8488]

“My wife breaks a nail as soon as she walks into the garage” I’m dead lol

[@wyvern3525]

Thanks so much! this really helped a ton! The amount of detail and step by step process made this the best car install video i've even seen. Keep the content coming i can't wait to get my EQT stage 2 e85 tune on my car now xD

[@mikemensinger5763]

Thank you for this video, it helped me a lot, and I got my HPFP installed. Right on!

[@drsnowmon]

Details in this video was so satisfying

[@t3rr0rdactyl]

I dealt with those little seals (or at least very similar) when helping a buddy do his valve stems on his c6 vette. Glad I'll have "some" experience going into this lol. Nice write up

[@petermcdonald7380]

Thank you! Was going to pay to have this done. But because you showed the tool kit from Amazon was so cheap. I did it myself.

[@sparky8901]

Thanks a lot you really helped me, even provided the torque specs for the M10 bolts on the housing. I broke my stock retainer trying to remove it with my bearing separator. Luckily my press got it out!

[@dylanlautt7873]

Thank you so much for this detailed video! I did this install today on my gti and it couldn’t have went smoother thanks to your video

[@Dasher498]

Great video, thanks OP!

[@arob_157]

Thanks for the video. Helped out with my install.

[@bosspanda6195]

Bearing splitter kit lol i didn't know the name and ive been looking for it thanks for the vid

[@ghostbuster187]

Great detailed video. I just got done doing mine the same way a little while ago and wish this was out then 😂

[@midnightmodgarage7740]

Hey CPO. Thank you for the awesome tutorial. Just did one of my own amd gave you a shoutout. Keep up the awesome vids.

[@ForRJ]

Great video, I had mine done by OstarMotorsports while doing some maintenance, didn’t cost me too much, you need to do some 0-60 after the full E85, I spun all first gear and still manage to do a 3.6s on 80 degrees, while doing 3.8s with no spin on E30 on my heavier S3, I do run the stratified dsg instead of the Eqt because the lower rpms LC I keep getting more consistent results, plus I like it much better on D mode.

[@jerrydont]

This was amazingly helpful, thank you so much!

[@dirk5950]

I've done a couple of these. Excellent video.

[@Deane597]

This is so nice and detailed !! Thank you !

[@KXP70]

Fantastic video, thank you!

[@diegorodri19]

Awesome & clean install

[@alltheboost801]

Beautiful work and great video! Seems like you’ve made quite a few mods, what’s your next mod? And are you thinking of selling your car anytime soon?

[@kennyq45]

Thanks for sharing 💪🏾

[@MrWilliamathomasusa]

🟩🟩🟩 God… What a fantastic useful video… I have a M7.5 R… Love ❤️ the car… Thanks for your time…

[@haku107]

Where were you on Friday 😩 I took it out and couldn’t get the spring to depress so I just gave up and installed back in. But with this video I’m gonna try to redo it when the tools come in and see how my luck goes 👍🏽 thanks for your great video man

[@EVERYTHINGcpo]

friday... I was filming this video! lol Glad you are going to try it again!

[@haku107]

@@EVERYTHINGcpo so I bought the clamps you suggested and I understand how to punch them closed with the tool but how do you loosen it if you need to clean and or repair something in the hpfp?

[@EVERYTHINGcpo]

@@haku107 you need to cut them off and put on a new one. They are not re-useable. Cut the ear with a pair of side cutters.

[@justincharlebois]

Great video 🙌

[@GTiz4Ever]

Another great vid. 1 question, My MK7 R is EQT Stage 2. Will this modification require an adjustment to the custom tune to recognize its full potential? I am not running E85 fuel. Any thoughts is appreciated.

[@brandonpena3516]

Can I use the regular clamp, like the ones on the intake but smaller size?

[@jy3406]

Hi! Great video. I am considering this upgrade since the oem one is limiting my tune to 380hp. However the 50% more wear on the camshaft is where I'm considering if I actually need more hp or not. What is your experience with the car after this upgrade? Any issues or potential worries? Thanks a lot!

[@DelmaMadras]

262 Gislason Islands

[@anthonywillard1477]

So Installed this and now I'm getting a p229400 do you know what could cause that. It wasn't doing it before

[@ewaldfernandes7327]

Great how to! Kudus!

[@yaboidog5499]

Hey man ik im 3 years late but I have a mk7 gti with is38 burble tune if I install the hpfp will I need another tune if I still plan on pumping 93 for the present

[@EVERYTHINGcpo]

@@yaboidog5499 yes. You’ll need a tune to properly scale the increased fuel pressures

[@gideonyoun]

while cranking down on the center punch, does it damage the oem pump shaft? If I ever want to go back to stock, will I be able to reuse the original pump shaft?

[@pnb17001]

What Ethanol sensor and gauge is that?

[@xxthe_remedyxx5296]

I have a 2018 S3 currently running Stage 1 93 EQT. Can I do the same with the internals for my pump?

[@waquishaholmes362]

Yes

[@knduong]

Can you install the internals and run without a tune?

[@EVERYTHINGcpo]

No. You should have a tune.

[@knduong]

@@EVERYTHINGcpo say I was already tuned stage 2+ but wanted to upgrade the pump

[@onelowvdub]

"make sure your shaft is all the way up "

[@angelj7419]

Is autotech internals still the go to? I keep reading mixed reviews.

[@EVERYTHINGcpo]

If care is taken during install I see nothing wrong with them. I have yet to have any issues with mine.

[@SilentEffects]

The bearing kit listed is unavailable, is it just a 2 inch puller? That I could order on Amazon

[@EVERYTHINGcpo]

I don’t know what size other than “mini”. I would imagine any of the sets that have a small one would probably work. I know some of them are large and that would not work too well.

[@nicknachos1]

So to run full E85 on the MK7 Golf R you need an upgraded HPFP? What else would I need?

[@EVERYTHINGcpo]

On the R, that’s it.

[@JacesOwnWorld]

Well, looks like all the puller kits on Amazon have recently had a “COVID” markup of 100%! So dumb. Harbor Freight ftw once again…

[@EVERYTHINGcpo]

Ugh

[@b58.soupra]

silly question, but what kind of oil did you use to lube it with?

[@EVERYTHINGcpo]

I have no idea. Whatever was nearby. It’s only for the initial start up…

[@poyo3582]

Would I have to replace the bolts for the hpfp?

[@EVERYTHINGcpo]

Technically, yes. Most people see no impact from re-using them once.

[@tsras1979]

Hey How did you check if the HPFP is working properly?

[@EVERYTHINGcpo]

If it’s not working properly you’ll likely know pretty quick. Massive fuel cuts at wot. But the best way is look for the increase in rail pressure psi in the logs.

[@tsras1979]

ok so I did good then haha. Thanks again!

[@jacoballen5837]

You don’t need a tune necessarily they claim 5% power increase on stock map I believe

[@daydream2818]

Im installing today , how has it been so far ? Any issues?

[@EVERYTHINGcpo]

Runs like a champ!

[@daydream2818]

@@EVERYTHINGcpo what size key do i need for the brass fitting , the lower fuel Line?

[@daydream2818]

I meant the hard line fitting

[@EVERYTHINGcpo]

@@daydream2818 17mm

[@daydream2818]

@@EVERYTHINGcpo i have ie i can only flash at home , should i pump ethanol then drive home and flash the ecu or the apposite? Gas station is 5 minutes away! Thank u btw? I was thinking maybe fill up a gallon and just bring it home , what would u say