Just changed ours in about 45 minutes by dropping it through the bottom, and sending the new one back through. You don't need to remove anything except the bolts and the wire.
@SteveMartin-gu9yw10 ай бұрын
Lot more work than is actually necessary. If you remove the oil filter, you only have to undo the alternator and it will come out the bottom with no problem. Just pick up a $5 oil filter to replace.
@MrErViLi5 ай бұрын
Yeah, but then you have to drain all the oil. Then you'll have to spend $30-$40 extra bucks on replacing the oil. And why would you use a crappy $5 oil filter? Use a good quality one. I prefer this method because it's easier on the body to stand up rather than having to jack it up or use ramps and then crawl under the car.
@SteveMartin-gu9yw5 ай бұрын
@@MrErViLi no you don't have to replace the oil the only oil lost is the oil in the filter
@ChristopherSapp-h9nАй бұрын
Nice job sir
@ShaniaThomp10 ай бұрын
That damn powercable. How you make it look so easy...
@Ecar6192 ай бұрын
I took it off and popped it back in but I’m stuck at replacing the tension bolt I think is what it’s called? Does the longer horizontal bolt touch the belt? Is that how it tightens the belt?
@gorilic17723 күн бұрын
How do you get the bottom bolt off? Removed the nut and the bolt goes in a few inches and hits the side wall. Can't get it to go the rest of the way.
@endeavorautorepair3 күн бұрын
The bolt is lying in a channel, which means when you losen the bolt you can just pull the alternator off. Check the other comments for more info.
@mountopia772 ай бұрын
Ya forgot to connect the negative back to the battery. 😅
@WaliJamalBey Жыл бұрын
How did you get the bottle bolt off?
@endeavorautorepair Жыл бұрын
It only had to be loosened, the the alternator comes straight off. It's more like a groove then a hole that the bolt goes through.
@WaliJamalBey Жыл бұрын
@@endeavorautorepair yeah I figured it out after an hour of trying to get the bolt out 😂🤣😂🤣😂🤣 thanks for the reply
@WaliJamalBey Жыл бұрын
@@endeavorautorepair and thanks for the video 👍🏿
@FelixV Жыл бұрын
The long screw on the bottom, how or what type of socket did you use to get it out? I got the nut on the right side and got it loose but can't get it out
@WaliJamalBey Жыл бұрын
@@FelixV did you read his response to me?
@azaelenriquez8969 ай бұрын
Bro come over and fix it for me
@taylorjiles65088 ай бұрын
You removed the dipstick and then the next frame there’s a dipstick
@endeavorautorepair8 ай бұрын
I edited the order from how I actually did it. The new order of components is easier and makes more sense. Good job for noticing though 😉