Aluminum Rod Rack ( Totally Adjustable )

TA Day we are building an Aluminum rod rack thats fully adjustable , and no welder is needed to build it . check out some of my other DIYs im sure you'll find something you'll like .
Check us out on
Facebook
/ 997275703941362
For Fishin N Stuff Gear visit the Link below
www.etsy.com/shop/PebsPrettyf...
Thanks for watching dont forget to subscribe and click the bell
COLTON HOWELL
is the original designer of this invention
if you wish to buy a Rod Rack like this go to the Link below and they sell these RodRacks made even better than i made em
/ 106510480997771

[@runninglatefishing]

Thanks for the shout out Keith but I need to be clear, I didn't invent the Mul-Tbar. Colton Howell gets credit for that. I just seen his build and decided to make my own. These Mul-Tbar rod racks are amazing and strongly recommend them.

[@Sportsman101]

You weren’t kidding about it being totally adjustable, love how you can lay it flat for the boat cover! 👍

[@bigo573]

This video is awesome. I was thinking about building some rod holders for my boat and you come out with the video on how to make them. You are the MAN!

[@frankweathersbee2553]

Dream boat rite there! Very impressed with the rod holders.

[@garydavis756]

I used your rod holder hack only I shortened the top and put my fish finder on it. It really cool, thanks for the idea and keep up the good work. I’ll be watching .

[@gregnuttall3637]

Now thats nice, One of the best rod holders I've seen. I priced some aluminum the other day and your right that stuff is expensive.

[@emilymarble1174]

Good product, easy to put together. Keeps my rod’s organized!

[@BlackChrome84]

Great job Keith!

[@myadventureoutdoors]

Even though I have no idea how you built this rod holder, I gotta say it's pretty damn cool. The fact that they lay down and are adjustable makes them sweet. You got talent boy.

[@papad2752]

Awesome video and project... I'm on it!!! Thank you so much for all your videos!!

[@JohnonUtube68]

I made one with 4 holders out of 2x4s, fiberglass, and epoxy 4 years ago. Still works fine. Had to use what I had on hand at the time.

[@georgemann9213]

Very nice as always. You build some great stuff that helps a lot of people save money. Thanks man. I might have to try this.

[@billritchie2810]

That's one sweet rod holder DIY build! Well done sir!

[@johnlocklear7991]

Great looking project bud! I’ll be making me a set of these for sure. Thanks for what you do and keep it up!!!👍👍

[@CatfishWeekly]

Outstanding build!!

[@benslone1782]

Another great video keep them coming! You inspire me to do more modifications to my boat!

[@Packdawg20]

I really like those they would be great for spider rigging out the front of my boat or long lining out the back I love how they can fold down for storage awesome video keep em comin

[@FishinNStuff]

There's a company that sells em , the link is in the description box

[@waltershea7981]

Great rod rack just built 2 but instead of tapping for bolts I just through bolted and offset where bolts came through block it was a lot easier then tapping and works the same Thanks for the video!

[@bobbynewton9247]

You have some neat stuff on your channel. Thanks for sharing God Bless

[@vinniefusco7809]

That's a great looking rod rack! I like the way you can adjust it.

[@FishinNStuff]

It is i put the company that sells it in the description box

[@herbertefox6000]

Awesome stuff man, I'm definitely going to build myself one of those 👌👍✌

[@phillipwells7162]

This is awesome I can't live without

[@JustinsFishinFetish]

The fabracobbling Messiah has done it again! That is an awesome rack!

[@larryking606]

You have been such a Giant help to me ! You have some of the gosh wonderful ideas, I have seen in a long time !!!!!! So glad I found your channel ! Thank Ya !

[@FishinNStuff]

Thank you

[@pnwRC.]

AWESOME project, my friend!

[@downdirty8543]

I’m always looking for cool DIY’s like this. This one is the JACKPOT brother! Thank you! So long as I can find the aluminum stick suitable for the base and upper pivots. Well done!

[@FishinNStuff]

We are brothers we both fishermen

[@jeffjones4006]

I love your stuff easy and cheap and user friendly.

[@FishinNStuff]

Thank you Sir

[@borfishing7690]

Great video and great great rod holders👍🏼

[@swollentamale7921]

Happy Father's Day! Another awesome video man 🤘🔥

[@joebuck66]

Very nice. Simple thanks for sharing.

[@joes.1945]

I watch all your videos and love them! Thank you forgot taking the time to making them so detailed. Also, every time I am working on a project at home, I hear the music that you play in my head. Lol

[@larryking606]

You have some of the best ideas , I have seen !!!! I just want to Thank you Again for all of the information you are putting out here on YTube ! Keep up the great work !!!!!!!!

[@FishinNStuff]

Thank you Sir

[@johnbush2798]

Another grand slam DIY video brother...you are a master craftsman!!! Love your sense of humor too...that PPE zinger was unexpected and was a belly laugh. Love your channel!!! Happy Fathers Day!

[@dennis3161]

thanks brotha I thought those pictures looked familiar 👍 love it brotha

[@vanceheck9130]

Those are awesome man keep the videos coming love your ideas

[@bryanb6129]

Awesome job! Those are very nice!

[@FishinNStuff]

Thank you Sir

[@CarolinaCatDaddy]

Very talented Keith!

[@thomascheatham3519]

Man I got to say that's a great idea I really like these great video as always thanks.

[@jenky1044]

Very nice. Cool build. 😎. Thank you for sharing this with us. Hmmm.🤔. (thinking). If a guy made one of them with just the upright part (not the horizontal rod holder part), your buddy could put an action camera on it (GoPro type) and it would be adjustable. He could put it on the front (facing back) and film a whole day of fishing and not have to hold the camera. Just a thought. Have a great day on the water.

[@ManningTheOutdoors]

Those are awesome, another great video!

[@hitnmiss49]

Those are very nice. I bet he will like them

[@WestMichiganJigCo]

Those are awesome!!!

[@michaelrogers4285]

Awesome as usual 👍.

[@TheFlyingJerzey]

Awesome. You should make a portable one for us bank fisherman. That would be epic

[@MrSki-mv2kr]

Thank you very much, I like the design and and simple to make. I know I can make it from steal because aluminum is not that common where I am, but paint is always around. I looked these up online and saw $450 for a pair. That's ridiculous, with such a easy design and a few tools. Thank you again

[@SluSharkND]

Brother, i'm so glad you were able to get back on the safety-train and address the need for PPE! That aluminum shrapnel might have killed you! Great content as usual, sir!

[@FishinNStuff]

Hahaha I try to be safe , its a hard job but somebody has to do it lol 😆

[@johnsimons9039]

Duck boats are awesome. Tell him don't change anything. With them rod racks it perfect. Great video.

[@williammills936]

Those are cool as hell!

[@markreilly8644]

I watch your videos because “I like ‘em”

[@chucksmith5002]

That is a cool idea

[@glennscatfishing]

Hey those are awesome and “I like em too” ,got give credit to Josh as well, great design.

[@FishinNStuff]

Colton Howell design those , i didn't know at the time of making it . But you are right they are awesome

[@JohnAmes]

Thanks buddy for the great video my friend 👍

[@quikcarl61]

You sir are a nutt, and it's because of that, and a few other reasons I subscribe to this channel. Keep up the excellent work. Ciya

[@metaldetectingtruckerandot1932]

I love the PPE comedy. Lol. Great video!!!! I bet I can make a smaller version for a kayak. That would be awesome.

[@FishinNStuff]

I bet you can man

[@dantolo817]

Nice job moonman

[@quinnhooper5103]

Your the man love this

[@roughcountrykids1643]

Love the video

[@gregbryant9673]

A Great DIY.

[@LRM135]

Change the bolts on the bottom and top to wing bolts so you can do it by hand and won't need a wrench when you want to adjust things. Great job, looks totally useful and cool.

[@brents4729]

The idea is good but will never work. Even with nuts, and tightened with a wrench it will still move. Thats why the original manufacture of these exact rod racks (MulTbar Rod racks) Uses a set screw in conjuction with stainless steel nuts to lock everything in place.

[@markbaehne9389]

Tap magic aluminum taping fluid works best , really this set up .love your videos

[@FishinNStuff]

Thank you brother I appreciate and it'll try it

[@faronmastin8683]

Nice I like them there rod racks lol. I might have to make a set for my boat.

[@mitchhelms6772]

sweet set up nice n easy what nice friend you are

[@glennmeadows6892]

Love your vids keep them comin

[@mikecha1957]

Yes indeed this is pretty dang neat. I like it..👍👍

[@dstallard5673]

Your a funny guy. Love the PPE part. Another good video

[@chadjackson8420]

Great racks, and I loved the PPE jokes... I appreciate that you can keep it light and are not to have a joke at your own expense. Part of the fun of watching your videos. Always looking forward to the next one. Happy Father’s Day man! :-)

[@FishinNStuff]

Thank you Sir

[@bwcok7947]

TA DAY is fathers day! Happy Fathers day! The new boat is broke in and the walleye have been filleted! MMMMMMM! Cajun breading and we are eating! The best part was we caught two big catfish on spoons and we had them for breakfast! I will be making these for each side of the boat! Thank you, stay safe, tight lines and keep on catchin!

[@techrfun]

Jeff's idea as a electronics mount is a great idea for those of us that have limited dash space!

[@coltonhowell3049]

This product is already out. Look up MulTbar rod rack on Facebook. I am the one who 'invented' this product and sell rod racks, and graph mounts.

[@vincentdonnellymadirishman5158]

Some man for one man.

[@TheWaggaBloke]

Well??? What Can I Say! Old Mate!!!! Yep! You’ve Gone an Done it AGAIN!!!!! 😳😮Another Totally Brilliant Video AS Always!!!! Thank You 🙏 Once Again for Your Time and Effort as always. Regards: Rod

[@FishinNStuff]

Thank you Mate

[@billmoss5624]

Need some stainless wedge-lock washers. Great DIYS. Thanks

[@1cutemale]

As everyone has said that is awesome, only thing i would change would be using wing bolts to be able to adjust it without a wrench or ratchet, but otherwise another grandslam.

[@jeffjackson5331]

Those are pretty cool looking rod racks. I love those Fishbite Rod Holders. Awesome build bud! Happy Father’s Day to you as well! God Bless

[@FishinNStuff]

Thank you Sir and happy Father's day

[@jeffjackson5331]

Fishin N Stuff thank you and you are very welcome.

[@themadtatter4055]

Now i just need a boat lol great diy video ty

[@lexwaldez]

He's going to take the bedliner out of the boat. That's a video all by itself right there. Like to see that one.

[@FishinNStuff]

Its pealing off

[@rodneyhardee2527]

Funny as crap! Nice job brother. Thanks for the videos, Feels great to laugh about something! Loving the videos in the lowcountry of South Carolina !!!

[@guyh.4553]

Pretty dang heavy duty rod holder!

[@ernstkromhout7793]

Nice idea!! Great video!😂🙌🏻

[@victoraguilar159]

Nice

[@catfishbill]

I really like the adjustable rod rack and want to build on for myself. I managed to get all the dimensions except for the top plate that holds the rod holders and the very bottom mounting plate. I really enjoy watching your channel and appreciate everything thing you do, it's PRETTY AWESOME

[@genesloan3175]

A lot of drilling and screwing (okay, threading) but dang nice looking.... But I think on my ProCraft, after some thinking and looking, I'm gonna do a metal rod contraption that will hook under my cleats that will hold the rod holders on a similar adjustable angle, and removable from the cleats, where they could be stowed away.... What I liked about this one just now, was the aluminum stock. That's even better than the steel I was going to use. But words are nice, I just need to to start fabrication of it and get it done. I got this idea from one of your subscribers on the FB channel.... and I'll give him credit when I do this.

[@FishinNStuff]

Well there's a guy that makes these Racks and actually he invented em , he has a Facebook page called MulTbar

[@FishinNStuff]

I hear they aren't high i know I had well over a 100 bucks into mine

[@genesloan3175]

@@FishinNStuff that's big money, and they look it, too.

[@alabamaclickerfisher]

That’s cool

[@michaelyost1490]

That was great🤗🤗🤗🤗

[@davidgrochmal5383]

My fishing hack is you take work out matts and cur them to fit the bottom of boat and cover up carpeting. Nice on the feet and easy to clean. Easy clean up of fish slim. I love them. See it any one else can come uo with. A hack on work out matts that go together like a puzzle. Thank dave !!!!!

[@FishinNStuff]

I showed how you can use them to make a kydex press on my pvc knife sheath video

[@fishin-impossible2992]

Those things a bad Azz . like you said in the video Always wear your PPE you crack me up. Thanks for sharing . Keep the videos coming brother

[@FishinNStuff]

Haha thank you for watching brother

[@gregtrent5068]

They look really good. Will that one bolt on the adjustable bolt and nut hold enough on a big fish takedown? Guess a body could drill another hole and insert a pin to lock it down.

[@fourwinnsdummy]

Hey man, I got another simple DIY idea for you. I just started using an Alabama rig for bass fishing and needed a way to fit it in the Plano 3600 style box. I ended up just taking the plastic ring off of a Coke bottle and flipping it inside out. Then I cut all of those little teeth off of it and slid it up onto my A-rig to keep all of the wires together. Then I cut a small v in the top of the center divider on the Plano box for the neck of the A-rig to sit on. Then when I want to use it I just take it out of the box and slide the ring back off. The wires automatically spring right back the way I have them bent.

[@FishinNStuff]

That's a good idea man , I like it

[@alanwinge8775]

I had some Rigid cordless tools purchased about 16 years ago from the Homeless Despot and my first battery charger caught fire and burned up. At least it wasn't in a place where it could cause a disaster. The store gave me a new Rigid cordless tools set, but that was wierd and the only time I have ever seen a battery charger blowing up like that with Sparks shooting out. It is rare but things can be defective and be hazardous.

[@FishinNStuff]

They sure can man , i once loved Dewalt but I had a bad experience with one . But it probably would have never happened again

[@davidwalker6438]

How about a good DIY Rod Holder system for a Pontoon boat? Few options out there other than Monster that are really good for Pontoon rails. Personally I only get to fish reservoirs, so I pretty much have to fish out the side. Problem I have run into is, the seat placement, and the bimini top can get in the way. Just seeing if you might have a solution. Thanks!!

[@user-cp6cu6tq8f]

WOW very nice!! Betcha that aluminum stock was expensive.

[@FishinNStuff]

It is expensive

[@rjvjr01]

You can also make one something like that to use to make a adjustable base for your electronic fish finder for more adjustability .. Check out Corn Field Crappie and see how theirs is done . I made one it,s great . While your at it check out their rod racks for transporting your rods in your boat . Made some of those from black cutting boards from Amazon ,use a router and a clove bit to clean those up. Just a few ideas .. I,m going to make some of those rod racks you did . Cool...

[@coltonhowell3049]

This product already exists. Check out MulTbar rod rack on Facebook. I'm the one who invented this design

[@danthompson25]

Brother FnS, Great movie!!!

[@mondelldavis4708]

On your video on rod wrapping , i discovered that using baseball bat wrap looks and feels awesome too and it's cheaper than sniper wrap try it sometime if you haven't already.

[@FishinNStuff]

I love baseball wrap . I was going to do a video on it back in the 90s when I carp fished . It was normal to get syrup on your rod handles . Using baseball wrap made em comfortable and it was easy to change when they got all sticky

[@ernie9819]

How about a big float that lights up for catfishing at night. Thanks for all the great DIY video's, I really enjoy your channel !

[@FishinNStuff]

Thank you Sir , i appreciate it brother

[@frosty6699]

Love ur channel. Do u have one with it being a welded adjustable version. That would be awesome

[@FAKE-NAME]

If you have it in a position where the top can reach over the side you can also use this as a pully systems to haul up heavy things on rope. Just mount a roller or 2...each roller the rope passes over cuts weight in half.

[@FishinNStuff]

That's interesting about the pulleys

[@gonzowrenn6036]

Wish this video had been out before I bought mine from mul Tbar. They have them exactly like this

[@mystic_tacos]

I don't even have a boat and I want some of these LOL

[@tarheeloutdoorexcursions5580]

That design on a smaller scale would make a great depth/fish finder mount.

[@coltonhowell3049]

This product is already out. Look up MulTbar rod rack on Facebook. I am the one who 'invented' this design

[@tarheeloutdoorexcursions5580]

@@coltonhowell3049 you are and I have seen them. If I didn't already have rod holders and electronics mounts that I was satisfied with yours would be on my boats

[@FishinNStuff]

@@tarheeloutdoorexcursions5580 he has some great products , i didn't know he sold em at the time of making this video . But i like what he does

[@SquirrelHunter1]

@@coltonhowell3049 they are nice but way to expensive for the average fisherman $$1000 for a set with holders that’s crazy!!!

[@rider660r]

@@SquirrelHunter1 That's the problem today,everyone wants to make a $ million over night and charge 10,000% of T&M. Build your own and save $900 or more. I have,and also added a lil tweak how you mount them on my particular boat.

[@elocks04]

Another great build. Now just make one for a kayak please