Amazing Process of Making Gas Cylinder | Factory Manufacturing Process

[@RandomThingsUp]

Hey My All Dear Friends Subscribe To My Second Channel (Random Factory) kzbin.info

[@sansangchan4706]

。

[@mdkamrulalam.1451]

🎉

[@trickyhickey69]

The quality control is my favourite part.

[@SipCompany]

And the powder painting without any face mask too ....

[@peterectasy2957]

imagine our parents having that fully loaded propane cylinder in house -)

[@old_falc]

А что вам не понравилось?

[@Chris-yy7qc]

Yeah, who doesnt want to have such a gas container at home?

[@Chris-yy7qc]

@@peterectasy2957 All you can do is hope itll be over quick when that thing fails/explodes

[@operationscomputer1478]

The safety and quality culture in this workshop is amazing.

[@vaterlandgr7553]

Yes! They does not exist!

[@xavierzlotorowiez316]

@@vaterlandgr7553 the poor dude at 13:40 fr

[@darrinpatterson2764]

@@xavierzlotorowiez316 he's been sacked!!! he was caught coughing up powder coat outside of work so they let him go for stealing !!!

[@Sergei_WHY]

The guys arc welding stuff all day with little more than safety squints... I hope they are OK. I can only hope.

[@rjparry1]

Working in these factories must be the equivalent of smoking 10 packs of cigarettes a day

[@thejll]

Yes, but you get to throw everything on the floor with a huge crash!

[@Superfoura]

Интересно, какая у людей продолжительность жизни с такой работой?

[@SurikenTSD]

Да там, наверное, больше половины до пенсии и близко не доживает. Я сколько смотрел роликов индийских с различными производствами, так людей жалко - никакой абсолютно техники безопасности, никакой охраны труда.

[@Superfoura]

@@SurikenTSD да я тоже смотрел и офигевал

[@nostromo526]

Safety Squints engaged; Safety Breath Holding engaged; Safety Toe Curling engaged.

13:52 painting without no mask. OMG!

[@meecob]

He was powder coating - even worse

[@Chris-yy7qc]

*all day long

[@schlaznger8049]

Organization is not big in this shop I guess. Oh and the pride the take in their work by throwing the parts around, exquisite!

[@GabrielKozsar]

Closed eye welding technique. Why bother with welding glasses or hoods. It is an art in itself. :D

[@dziggy3004]

Holy crud! Look at that long clothing near the ROLLING machine! DANGER ZONE!

[@_Juanaev._5.5]

На маляры посменно работают наверно, каждый день новый человек💪😎

[@meecob]

Amazing safety standards

[@ZeeshanSaadiq]

This is Pakistan skill

[@MICHAEL-ys3pu]

Must be the safest factory in the country, all the men had shoes on.

[@malumarado1600]

Que buena seguridad en el trabajo sobre todo el pintor.

[@sergioferreiro292]

No llega a jubilarse.

[@malumarado1600]

@@sergioferreiro292 Que vaaaaa. cuando se vaya al otro mundo... otro no es problema. Alucino la seguridad de estos sitios, Sin guantes ni gafas que es super importante, ahí te salta una chispa o un trozo de algo te quedas tuerto. ahhh y con chanclas moviendo hierros, uffff jejeje. Tiene que haber accidentes a saco pero si ves más videos que hay de este tema de empresas Indias son peores jeje. Tela

Yo también me fui de nalgas cuando vi al pintor sin mascarilla!!!

[@USNTD21965]

Remember this while you're watching this process: Pakistan manufactures its own atomic weapons. Now that's "an amazing process" I'd like to see. I wonder what the guarantee and better yet, the worldwide market is for this stuff?

[@nicolanisco9895]

Those who complain about the safety conditions are the same ones who always look for products at lower prices. That's how you get a low price.

[@augustopizarro6823]

Uau! They are wearing Gloves and Shoes!!! Amazing in this type of video.

[@ShaneMcBryde]

The guy applying the powder coating isn't wearing a ventilator! I can only imagine what his lungs must look like.

[@dustintacohands1107]

Won’t last long there

[@peteraugust5295]

Probably red.

[@mr2gti]

Red for Danger lmao

[@dingleberry1]

@@mr2gti funny stuff

[@davidstewart4570]

Powder coated, probably.

[@Wessexify]

Каменный век не заканчивался!

[@born2soon]

Open toed shoes and dropping the tank off the paint line! My GOD!

[@aqeelraja4651]

Great work Randomthings

[@RandomThingsUp]

Thanks for watching

[@txupetin2]

Como siempre un gran trabajo, tus hijos no lo olvidarán , seguro

[@cuttingedgestainlesssteel6771]

The fun never stops, ever

[@sptomcat866]

他們瓦斯瓶不用(試水壓)是用(試氣壓)方式?

[@franciscosandiego3026]

Great video brother from the imperial county California 👍👍🖐️🇺🇲

[@Hotsauce-cj7kj]

Sub-arc, wow. Absolutely never would’ve thought THAT process.

[@rhinomite5203]

Tanks last longer than workers health

[@JunktionJack]

You can say that again

[@williambautista4912]

i work on this kind of cylinder factory here in the Philippines, the difference is we subject all cylinder in a huge oven befor painting. kinda hard work hehehe. good job to those hard working men

[@user-uamus]

на разрыв проверяют? или как повезет)

[@vodolaga]

😅😅😅

[@nikspanakis]

Woke up on nightmare tonight and checked my gas cylinder. No pak gas thankfully. Phew!

[@GerardHammond]

this was frightening and amazing. So dangerous much effort for such common things.

[@cammobunker]

All the usual I've come to expect from Pakistani work videos. Absolutely abysmal working conditions, zero safety equipment, zero quality control. Doesn't leak, OK. Will it hold pressure? Don't know. Weld integrity? Unchecked. Powder coating with no mask, welding with a hand held shield, working with heavy items in open toed sandals, working around moving machinery in loose, flowing clothing, no hard hats, no hearing protection, blah, blah, blah. The most easily replaced things in that factory are the workers apparently. This is why we have labor unions and things like Health & Safety/OSHA. I'd bet they lose minimum of 10-15% of the workforce per year to accident, injury and things like respiratory illness and being blinded or deafened.

[@pattygq]

As seen by the shit quality of their "workshop". Scraps on the floor, etc. Bet that dude in the powder coat booth doesn't last a year and I don't mean at this company.

[@SkrixFox]

I was about to comment and say the say thing but you beat me to it. It makes you really happy that you don't have to deal with those kinds of working conditions. Poor guys. Especially the guy that was powder-coating without a mask. He will be dead in a matter of months.

[@daffyduk77]

Like motorcycling, if you can survive the first dodgy year or so ("learning on the job" - the hard way) you probably wise up to the risks etc

[@npistudent]

Порошковая покраска без респиратора? Должно быть, на этом производстве большая текучка кадров 😅

[@AlexTehmaniac]

Там распираторов много нужно, проще человека поменять💁‍♂️😂

[@Ошарашник]

Человек может кайфует от своей работы. Вы не понимаете.

[@Eshkinckot]

Каждый год новые

[@Lordismyshepered]

Working conditions in India & Pakistan are so tough.

[@paulkorakas8778]

THE LEADERS NEVER CONSIDER WORKERS ARE HUMAN. NO MASKS NO VANTILATION THE PAINT SPRAYER BREATHS PAINT POWDER, HIS LANGS MUSTS BE COVERED WITH PAINT. PLEASE PLEASE DO SOMETHING. FROM GREECE

[@TheMRmatt007]

That's why they die young

[@USERMEX1000]

These people are incredible and the processes are magnificent. All you need is a manager with more vision who implements a quality system. Congratulations from mexico

[@bustedford]

Those fellas do nice work👍🏻

[@azharsalim2028]

I really symphatize the guy in the paint spraying booth. I hope he will be given a decent protective equipment for his job.

[@KuopassaTv]

Could at least put transparent plastic between him and the paint area

[@bravodelta3083]

His lungs must be powder-coated on the inside. Poor chap :/

[@azharsalim2028]

@@KuopassaTv ... I strongly believe that the owner of the factory is reaping a very fat profit every month, while neglecting the safety of his workers.

[@deangleeson4238]

The whole place is a nightmare, right at the start the sunlight shining through shows all the welding fume (a carcinogen) in the air. The noise would be terrible, not to mention the dumping of compressed air during the pressure/leak test, that poor old bloke that sits there and does that every day would be stone cold deaf. I am lucky enough to live in Australia where I make a good living protecting workers from this sort of exploitation. It is so sad to see these practices and so many people in developing nations hurting themselves like the western world did during their Industrial Revolution.

[@Chris-yy7qc]

His boss will probably not give him anything. But he could buy a respirator himself. Theyre not that expensive. The problem is those people either dont care or they lack the education to understand what theyre doing. Im not sure.

[@dezmand1973]

ooh powder coated lungs

[@stibis5713]

I think he hold his breath while painting lol

[@darrylr]

Ah yes such an "amazing process". The impressive computerized inventory management for traceability, the impressive automatic welding, the x-ray weld inspection, internal borescope and hydrostatic testing, ....

[@brucelarsen6650]

Pre-WW I tech for the most part. That one, single wire welder used was pre- WW II vintage, but the "shielding" stuff they used looked like used Kitty Litter. I guess the thing that always amazes me, and amazes me most, is that in an "Open Defecation Culture/Society" such as theirs (read: They Actually SHIT IN THE STREETS, and do NOT have "Western Bathrooms" with toilets in them), that they dare wear slippers, sandals or soft "street shoes" - and even go barefoot - as I have seen in other videos . I totally freak out if someone doesn't pick up after or at least curb their dog and I happen to RUIN a pair of shoes by stepping in a stinking steamy dog-pile, but I guess if you step in Human Feces on their streets, all the red and green curry they consume gives it a pleasant, soft, squishy and "spicy" quality that likely makes it seem healthy and fun, maybe even a substitute for washing one's feet. Eh? I wonder how many of their population are killed every year by those truly horrible, terribly made high-pressure gas cylinders.

[@ID-8491]

@@brucelarsen6650 Pakistan not India.

[@lmk10000]

@@ID-8491 Pakistan is literally muslim India. Is basically the same people.

[@dougaltolan3017]

If you're in the business of filling/refilling these then you'll be testing them yourself.

[@MyGebels]

Атомную бомбу тоже здесь делают?

[@KB_Pearl]

25 bar pressure test? No, soapy water enough.

[@taiqidong9841]

it is indeed frightening.

[@RobotN001]

Откуда вы знаете давление воздуха в тесте с водой?

[@gabrielbehrend7625]

And they can see the bubbles great with that great eyesight from welding with no eye protection for 20 years.

[@andromedaturnbull3512]

Well, in fairness, most bottled gas suppliers will test even new cylinders to at least 20 bar before use and retest at intervals. It's also pretty obvious when one of these cylinders has a leak during filling as they won't hold stable pressure. But still, there is a definite concern over a slow weld failure going undetected for a good few refill cycles.

[@용용이-o7c]

분체 도장 마스크 필수

[@someoneelse7629]

Oh the need to throw everything in every step of the way

[@omologeorge8403]

Now I know why goods from the USA and Europe are expensive; they consider a lot of factors in their production. Favourable working conditions being one of them

[@paulkurilecz4209]

Yes, we make the painter wear a respirator mask.

[@timecentral3134]

Might be destined for one of those places. The placards at 9:16 and 9:22 are in english. DOT 4BA 270 on one of them. Labelled Propane Butane and Test Date on the other placard.

[@pattygq]

@@timecentral3134 Damn you have good eyes.

[@daffyduk77]

@@timecentral3134 They're pretty skilled & hardworking, I noticed the seam pressure test, but I wonder about materials uniformity/conformity/standardisation for a pressurised gas like propane in a hot country like Pakistan or India. Or even Europe on a 40 deg. C day. I'm thinking of the seams/welding etc,

[@ID-8491]

Labor is also expensive compared to Pakistan.

[@lezhik00]

Надо запомнить , что баллона PAK GAS не покупать и не пользоваться ими {шутка}))) Парни работают в ужасных условиях на ушатанном оборудовании

[@user-muser_Han.1]

Стандарты то какие ,евро 8 наверное, очень надёжно, просто ужас.!!

[@DimitriyUKA]

@@user-muser_Han.1 Все лучше, чем в рашке за чекушку.

[@MyGebels]

Будем надеяться что они сплавят это пендосам😂

[@edinsonluzuriaga5894]

Gracias x video trabaje con ellos saludos

[@القناص-ط1غ]

صلو على رسول الله

[@القناص-ط1غ]

‏تنفّسْ ب لا إله إلا الله وعاتبْ نفسكَ بـ استغفر الله وتألّمْ بـ الحمد لله وتعجّبْ بـ سبحان الله وافرحْ بالصلاة على رسول الله واحزنْ بـ إنّا لله وانا إليه راجعون واكسرْ سُمَّ عينكَ بـ ما شاء الله تبارك الله وابدأْ بـ بسم الله واختمْ بـ الحمد لله.....

[@СергейБарановский-ь3в]

Рабский труд и перерасход метала. Маляр лет через пять такой работы издохнет.

[@240SSONLY]

The fact that not a single one of those tanks is vertically welded at 90 degrees on the jankiest stand ever made... tells me enough about the quality control with a soapy 2 liter bottle

[@d.jensen5153]

The submerged arc welding looked pretty good to me. The use of lap seams was interesting.

[@dougaltolan3017]

If you rely on a tank being bolt upright, you're missing a few regulations.

[@stevo68]

Never thought I'd see submerged arc on these videos.

[@stanley84pl]

i would like to see the safety test ;P

[@pyromaniac354]

it was there.using soapy water lol

[@сваркарезка-ц5й]

В малярке конечно текучка скорее всего 😊

[@puppygadget3189]

What kind of welding is that with the powder looking stuff? Never seen this type before.

[@timkelly2931]

It's called subarc

[@norman6422]

probably submerged arc welding

[@Aka02011]

@@norman6422 en.wikipedia.org/wiki/Submerged_arc_welding

[@dougaltolan3017]

Similar to stick welding with solid flux except instead of a rod coated in flux, it is poured on as a powder. Any that isn't consumed is recovered. Benefits are continuous filler wire (same as MIG), no shield gas, flux will cope with poor (no) surface preparation, no shortage of flux. Down side is that it can only really be done with the weld point horizontal.

[@puppygadget3189]

@@dougaltolan3017 very cool thanks

[@safiullah4636]

Great video

[@vinylvirus8735]

Nice

[@mikem5043]

That guy in the powder coat booth isn't gonna last long without a proper respirator.

[@luisalthaus7249]

No OSHA

[@mikem5043]

@@luisalthaus7249 OSHA or not, common sense (basic care of your own body) would want me to get a respirator for that job.

[@avtii]

new guy is cheaper than a respirator probably

[@crocodile2006]

Don't worry... there are about 1 Billion people that can replace him

[@kh-ro5su]

cheaper for them to just hire a new guy when this one dies than it is to operate a safe work environment

[@edwardashton7502]

love the way none of the machinary have guards on the, along with wearing sandals and best of all the way the pressure test is done, one daulty weld and the bloke doing the test will be blwon across the workshop, another reason why the West cannot compete on prices.

[@samcoub6566]

Por isso leis trabalhistas são necessárias. Se não fosse isso, a gente ia trabalhar iguais esses caras aqui no Brasil

[@sdamer4609]

looks like a thing that I will never EVER dare use

[@bravodelta3083]

I can just imagine the verbal explosion from my long-departed Grandfather if he went into this workshop. Needs a major sort out to make the workflow efficient, plus, 'We don't put things on the floor to store them!!!' :) As someone else mentioned I also feel for the workers in this quite bad and dangerous set of conditions. They deserve better as they work hard.

[@SaadMughal-ko5fw]

Not to worry, Pakistan on its way to implosion in the next few months/years. All of this will shut down.

[@daffyduk77]

Yup, the weight of those things, even empty ...

[@llirik0404]

Хорошая работа!Молодцы все

[@stefan2292]

This could be the ruSSian army in Ukraine. Badly trained, badly equipped, badly led, soon-to-die. And what are you doing here? We don't want you. Get lost!

[@giorgiobassi9078]

Buon. Lavoro. Complimenti 🇮🇹. A. Tutti...🇮🇹👍

[@Мастер-ь2ь]

Это какой то пиздец ! Ни спецодежды ни вытяжек ни охраны труда всё захламлено оборудование старье на последнем издыхе(((

[@zdaasmgr1398]

don't worry they test them real time with user. if survived test pass. if blast. test fail.

[@gafrancisco]

11:33 ...Quality Check Department

[@freddykoehler7118]

Super 😉

[@johnchamberlain5435]

Ask these workers about Diversity, Equity, and Inclusiveness initiatives in their workplace. Ask them how many of their kids are Transgender. Ask them about their company's policy on Sustainability. Ask their employer about work-life balance, and their Environment, Social, and Governance strategy. Ask ANY of them about paying a "Living Wage." They will look at you like you're from another planet.

[@abdelkaderlahcenebencherif8663]

Le contrôle des bouteilles doit se faire par radiographie.

[@HIBURANLOKALL]

Im from Indonesian

[@donaldparlett7708]

Where is the hydro-test and the valving of the tank?

[@dougaltolan3017]

UK regulations require that cylinders are tested at manufacture and periodically when they are refilled. Cylinders must be inspected at manufacture and every time they are filled. Testing and inspection can only be carried out by bodies authorised by the transport secretary. So... If Calor want to buy these cylinders then they'll need to be tested after purchase.

[@ФренкГаллагер-и7т]

major mistake! that soap emulsion will not show a gas leak, if this puts you in a stupor, ask why!

[@miltonjimenez5771]

How many blinds men are there????????????

[@amandeis]

Note the tight-fitting safety clothing. How many workers are there wrapped around the machine and injured? scary to see .

[@dimk6376]

такой баллон под давлением обязательно взорвется.

[@Ошарашник]

Далеко не каждый иначе кто б их покупал

[@anthonyteis8570]

Wow, all of this just to make a cheap barbecue ...

[@zombie821]

there's nothing amazing about it, it's shockingly bad. i just feel sorry for the workers and also for those who use these gas cylinders.... only a question of time until they burst

[@eeee.pppo.]

👍👍

[@ubergeek1968]

Just one of those cylinders is a bomb looking for a place to explode

[@Imaginekor]

극한 직업이네...도장작업할때 마스크 좀 쓰지 ㅠㅠ

[@amelsellami3393]

عليكم باعادة رسكلة الخشب وتلسيقه لصناعة الاثاث واعادة رسكلة الحديد والبلور المهشم نتيجة الزلزال واستعمال الردم لقاعدات مباني اخرى في مكان امن ومرخص بعيد عن الفياضانات والانفجارات ومناطق النزاع لتشييد المباني ضد الزلزال وتعبيد الطرقات

[@plumcrazy9842]

7:17.....SAFETY GLASSES? WE DON'T NEED NO STINKIN SAFETY GLASSES!!!!!!

[@wvbassassassin]

He had his safety squints on.

[@Graham1904]

Good no so quality surveys

[@kb_hadsom]

Good 👍

[@riooriginal6010]

quality control :) but overall safety in workplace is a total mess. very poor safety measure.

[@mattylad8035]

WOAH! Stop the video - WTF is a guy at 0:38 doing wearing shoes and not the standard safety sandals issued to all workers? :)

[@atordouniverso66]

Todo trabalho é pesado nao existe trabalho bomm somos guerreiro hein galera do batente pesado tamos juntos

[@RicardoSilva-mc8uj]

um dia, se chegarmos lá, não haverá mais gás e a terra levará milhoes de anos para iniciar novo ciclo!!!

[@Temir_usta]

Чувак маску одевай! В шлепках катают никого это смущает?)

[@danixsc]

I would never, ever in any scenario put one of these at less than 100 meters from me if full of pressurized gas.

[@dougaltolan3017]

You might already have done and don't know. The customer (your gas supplier) is responsible for regular testing, including on purchase of a new cylinder.

[@ФренкГаллагер-и7т]

главная ошибка! что мыльная эмульсия не покажет утечку, если это поставило вас в ступор, задайте вопрос почему!

[@алмо-ц7л]

Почаму?

[@ФренкГаллагер-и7т]

@@алмо-ц7л чуть создал интригу! но с эмульсией работает 50 на 50 ! если утечка маленькая это работает но если большая нет, просто пузырь не успеет надуться

[@pvccannon1966]

That guy doing the powder coating wasnt wearing any thing over his nose and mouth. OMG

[@davidhamm5626]

Down draft system. or something like that.His clothes and skin were clean.

[@swesleyc7]

No they weren't. You blind.

[@AppliedCryogenics]

While the seams were welded, what was all that gray powder that was produced?

[@vaterlandgr7553]

The powder is not produced. It is a coating wich protect the seam from oxygen and to fast cooling.

[@sergenn8272]

Круто и профессионально.

[@jimisflau]

Tempo de vida estimado para o pintor ? 3 anos...depois eles trocam

[@Vlad22051969]

Вот почему они взрываются

[@caveweta]

I’ll be fine, I’ll just put my hand over my eyes to stop the arc glare, (said no one ever). Sigh.

[@manojvishwakarma5847]

Iam dishends pressing in Ms and ss

[@GoldSrc_]

Pressure testing… with air? Yikes.

[@theodorehartman5086]

It's nice to see their employer is protecting them from all those hazardous materials. NOT. Life expectancy must be very low in that industry. :(. Their government is letting them down.

[@dougaltolan3017]

Yup, the old geezer at the test station can't be more than 60.