Amazon LED Light Upgrade for my Garage! | Budget LED Lights

  Рет қаралды 53,381

731 Woodworks

731 Woodworks

Күн бұрын

Пікірлер: 65
@731Woodworks
@731Woodworks 2 жыл бұрын
▼EXPAND FOR TOOL LINKS and INFO▼ Watch Next = 5 Workshop Upgrades Every Woodworker Needs: kzbin.info/www/bejne/fmWspmqfo7-Zbbs Tools In This Video: Shapeoko CNC by Carbide 3D: shop.carbide3d.com/731woodworks New LED Lights in Video: amzn.to/38bfgGZ Old Lights I Had: amzn.to/3Lu3VQF 1 1/4" Hangers: amzn.to/3NzRswN Cable Ties for Cords: amzn.to/3wTMvsD Smart Plug for Alexa: amzn.to/3LyxqRk Alexa Devices: amzn.to/3LwFfqK Good Lights to upgrade regular bulbs: amzn.to/3K0UOGQ (If you use one of these Amazon and other affiliate links, I may receive a commission) Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter
@salder70
@salder70 7 ай бұрын
Are these lights still holding up after a year of use. I am considering buying these for my shop.
@731Woodworks
@731Woodworks 7 ай бұрын
@@salder70 Yes, still working good.
@krisbabic89
@krisbabic89 2 жыл бұрын
I put these same ones in a few months back. I also used the pipe bracket and love them. Here’s a tip…All LED emit a frequency. I think The nicer ones block the frequency before they leave the light fixture. Since these are cheaper they do not block the frequency. If you have all the lights on and try to use your wireless garage door opener from your car or the keypad outside it can block that frequency and the motor will not respond. I left my garage lights on once and my wife couldn’t get into the house because she left her keys on the counter while she went on a walk, and I wasn’t home😂. The hardwired button in the garage or the Wi-Fi will work though since it’s hard wired. This was a fun troubleshooting to figure out what was going on. To fix it you can extend the antenna wire out the garage door with some speaker wire.
@sandmandave2008
@sandmandave2008 2 жыл бұрын
Omni-Ray lighting sells LED’s that are labeled “No RF”. I’m am thrilled at how well they light. I bought a case for a brand new shop and the price rivals the cheap ones from Amazon.
@alphafert608
@alphafert608 2 жыл бұрын
I put 8 led shop lights in my garage & originally had them all chained together to turn on with 1 switch. It was nice for a while but went back to individually turning them on because I found that at times I liked how shadows helped me judge some surfaces.
@edwardebel1847
@edwardebel1847 7 ай бұрын
Just got my lights installed and...FANTASTIC!!! Thanks so much for this advice! I did order the pipe straps, but as they haven't come in and the lights have come in, I used the clips that came with the lights and they worked fine. I was going to use a smart socket, as I have used those in the past, but just went with a light socket plug thingy and now all the lights work off the garage overhead light switch. Again, many thanks!!!
@danpedersen97
@danpedersen97 2 ай бұрын
Thanks for your video. I ended up buying these lights myself and they made a huge difference. I kept 2 in reserve for over my workbench once I get it built.
@FixItFrench
@FixItFrench 2 жыл бұрын
Have the exact same lights. I had to take 2 lights down when I installed them because they were so bright! 10/10 buy👍🏼
@mattperryman1948
@mattperryman1948 2 жыл бұрын
I have that exact same system in my shop, but the lights are 4 ft long, and I love them! Very bright and can be installed in any configuration you need.
@ronswoodshack3855
@ronswoodshack3855 2 жыл бұрын
Nice!! I just added more light to my shop. Makes a huge difference. Thank you for the content.
@GrantButler
@GrantButler 2 жыл бұрын
I love that I can come back to your old videos to find things like these awesome lights, and even your older one. I'll probably end up buying both
@norm5785
@norm5785 2 жыл бұрын
LEad lights are awesome, thank you for sharing this with us today from Henrico County Virginia
@stuffwithkids7127
@stuffwithkids7127 Жыл бұрын
Thanks Matt, I was about to buy the 6 pack from your older light upgrade and just saw these. Thanks for the info and demo. I used your link and look forward to the upgrade!
@MrDmorgan52
@MrDmorgan52 2 жыл бұрын
I caught the HF LED lights on sale a couple of years ago. they were $15.99 each, put 10 in a divided 2 bay shop . so bright, lights up the yard thru the cracks in the wall!!
@Rob-df6py
@Rob-df6py 2 жыл бұрын
Definitely. I put 8 of these 8’ strips up. Removed my old wall-switch controlled fluorescent tube fixture and replaced it with a gfci outlet that’s controlled by the wall switch. Plugged 2 of the leads for these led strips into that outlet. But I didn’t want all 300 million lumens every time i hit the switch so I used the included toggle switches attached to ceiling to create a few different zones. Screwed a big superball onto the end of a stick and now I can flip the switch and turn 1 strip on for the standard garage visit. But if I’m working on things I can reach up with the stick to turn 3 more, or up to 7 more, strips on. Now I can read my tape ha.
@KITDFOHS
@KITDFOHS 2 жыл бұрын
I hate to be the wet blanket.....but update this in about a year and change. I bought a 10 pack, and now I'm down to 3 working ones. Once you see individual LEDs going out it's just a matter of time till the driver itself craps the bed. Barrina's warranty is annoying since they want you to disassemble the light and mail them the LED driver. It's honestly easier to just order a new set off Amazon and return them to swap out the dead ones.
@731Woodworks
@731Woodworks 2 жыл бұрын
Aww dang
@KITDFOHS
@KITDFOHS 2 жыл бұрын
@@731Woodworks yeah they worked great.....until they didn't. That being said, I'm not chomping at the bit for a replacement set. They are functional for my needs. I have relatively low ceilings in my garage so it's not a huge pain to change them out.
@lawrencewildebaur9813
@lawrencewildebaur9813 2 жыл бұрын
Me too. I have the 4ft. They started to drop out one after the other.
@CyBe72
@CyBe72 2 жыл бұрын
Yes, we have these in our garage and in about a 2 weeks we had 3 go out. This is the second set in about 2 years where they start to go out, one after the other. I just got a UFO style light and that thing is bright! So far, it's working great.
@KITDFOHS
@KITDFOHS 2 жыл бұрын
@@731Woodworks if yours start to crap out you should do a follow-up vid. I bought mine because of many favorable YT reviews. Never saw any negative followups.
@MojoPup
@MojoPup 2 жыл бұрын
Loving the LED shop lights that are out these days. Found some motion sensing shop lights at HF for almost half the price of the ones HD was selling, and the HF lights are brighter. 3 years, no issues...just lots of light
@harleyfiremedic7796
@harleyfiremedic7796 2 жыл бұрын
I have the 4 foot version of these and love them. Bright clean light everywhere in the shop!
@JasonPeltier
@JasonPeltier 2 жыл бұрын
So yeah, I bought the 6 you recommended last time. They work great! But now I can tell I have some places that are lacking. So like you, I need to upgrade to these. And then, like you, I'll be using the original 6 in specific task areas. Thanks for the review!
@brentjenkinsdesigns
@brentjenkinsdesigns 2 жыл бұрын
Mighty Bright of ya shop!
@MCarberry89
@MCarberry89 2 жыл бұрын
I was going to Install a bunch of LED lights in my garage when I get home. I am glad you liked these. I will order these, your Amazon link didn't open the Amazon app. It's hard for me to spend money on something when you are not sure of the quality for the money. Thanks for the video!
@ronalves9118
@ronalves9118 2 жыл бұрын
great lights, I just ordered two sets one set for the basement shop and one set for the 30' x 30' pole barn shop. Ron USCG MKC RET
@JeffYantha
@JeffYantha 2 жыл бұрын
Lucky guy, I love the dice tray and the dice!
@codytooker777
@codytooker777 2 жыл бұрын
Hey Matt, I followed your old video for lights in my shop and they work great. One thing I did and you can do here is get a "Smart Switch" and replace the current switch you are using to turn on half of the lights. Once you do that you can then sync the smart plug to the smart switch and all of the lights can work off of that switch or from Alexa.
@Damon_Barber
@Damon_Barber 2 жыл бұрын
Lighting is definitely an upgrade on my list.
@GrantButler
@GrantButler 2 жыл бұрын
My dad's garage needs this!
@nmfam
@nmfam Жыл бұрын
I ordered the 4ft pack.... 1st and foremost GREATEST UPGRADE EVER! 2nd... I shoulda got the 8 ft like u said lol. Thanks for your reviews, they are very influential. 👊
@nathanhamilton3386
@nathanhamilton3386 2 жыл бұрын
I just recently installed 10 of the 8ft LED’s and I love it. My wife says it’s too much but she does not work out in the garage.
@dougmilton7409
@dougmilton7409 2 жыл бұрын
Very good idea for better lighting!
@SegoMan
@SegoMan Жыл бұрын
I replaced the 8' T-12 HO tubes and went form a 30 amp load to a 10 amp load with 3 times the light! The only downfall to LED's is FM radio are out and some overhead door openers don't work.
@shanejarry1978
@shanejarry1978 2 жыл бұрын
I either have these same lights or verrrry similar. I need to get some more. Only have 4 right now
@lextheap1638
@lextheap1638 Жыл бұрын
Score. Been looking for lights for my shop. Thanks
@chrisking3554
@chrisking3554 2 жыл бұрын
I have the same lights and could not agree with you more about the included clips, absolute junk. Love the light they give off. I have 8 to in my 12X16 shop
@Swamp-Fox
@Swamp-Fox 2 жыл бұрын
Nice shop upgrade!
@tomsanders5023
@tomsanders5023 2 жыл бұрын
I have these in my garage shop also and they are great. One problem I found is that if you have a garage door opener the led interferes with the remote and will not work when the lights are on.
@kdmigloo
@kdmigloo 2 жыл бұрын
Thats because they are junk.
@brosselot1
@brosselot1 2 жыл бұрын
I installed the same leds and found the clips that they came with were not very good. but they are very bright and work great
@WiscoWoodShop
@WiscoWoodShop 2 жыл бұрын
Same lights in my shop!
@shawnfields3503
@shawnfields3503 2 жыл бұрын
Hey there, I watch all your videos. I want to get a CNC machine, however having a challenge where to start. I'm currently looking at the Onefinity and the Carbide3d. Which model Carbide3d do you use?
@731Woodworks
@731Woodworks 2 жыл бұрын
I have the Shapeoko 4XXL
@Mike-ou5ps
@Mike-ou5ps 2 жыл бұрын
Howdy Mr. 731 I'm gonna tell you once again...For whatever reason, you seem to post things that I'm currently brainstorming. I used to be HEAVY into AD&D back in my late Jr. High - Early Highschool days. Still listen to the novels on Audible. Anyways...I still have friends who meet up weekly to do AD&D (I ain't got the time for it these days. Last time I went to one of his games, another player transformed from a cat into a human in front of a Dwarf Guarding some gates. In case you don't know, that's not a good thing to do in front of a Dwarf. That was my last day, hahaha). Anyways...My friend, seeing I'm about to go public with my Woodworking business, asked me to build him particulars for AD&D. On another note... I have yet another project/video for you to do on top of the "Raised Panel on table saw" challenge. BACK SCRATCHERS!!!! I'm out in my shop/s and from time to time, I get that ITCH I just can't reach. So, I find a corner/edge of my shop (or even a tree) and get to scratchin that itch. I can't possibly be the only Maker in a shop that gets sawdust down the back of my shirt. I figure...1/8" - 3/16" thick Oak or Cherry. Mill out a bunch of blanks. Simple Bandsaw cuts (or CNC if ya got one). Bucket of water a few inches deep, soak wood overnight. A few clamps, a 3/4" - 1" board with bullnose to use as a form to bend the soaked edge and some band clamps to bend and hold the wood to the form. Next day, take out of clamps, Bandsaw a few shallow teeth (fingers) on end, lightly sand and BOOM!!! Itchy back cured. You could even put engravings on them prior to the soak to personalize them. You share your ideas....I'm returning the favor :)
@stephenpalazziii9875
@stephenpalazziii9875 2 жыл бұрын
It’s definitely hard on the eyes trying to work in semi darkness
@salder70
@salder70 7 ай бұрын
How have these held up? Any problems in a year of use? Have cold temperatures affected them?
@BearCreekWoodworking
@BearCreekWoodworking 4 ай бұрын
Just wondering Matt, after 2 years are these lights still working good? Are you still happy with them? I’m looking for new lights for my shop. Thanks 👊
@731Woodworks
@731Woodworks 4 ай бұрын
Yes, no issues at all with the lights. They are on almost every single day. I had one switch go out a couple months ago, but had a few extras from the install, and easily unplug old, plug new one in and was back to work.
@BearCreekWoodworking
@BearCreekWoodworking 4 ай бұрын
@@731Woodworks Sounds Great! Thanks for the reply Matt!
@reginaldoxley1430
@reginaldoxley1430 10 ай бұрын
How’d you solve/prevent the bulbs from interfering with the garage door? I installed them into my garage and been having problems with my garage door opening.
@michiganracer1181
@michiganracer1181 2 жыл бұрын
Seems like the older I get I can’t ever have too much light in the shop..lol just curious if the lights stated the wattage is per light? I replaced some in our garage that had the old screw in bulbs 100w with some screw in LED ended up with twice the light and about half the wattage draw.
@davidahart2476
@davidahart2476 2 жыл бұрын
Hi Matt, I've been looking at adding led lights to my garage, I was wondering how have your led lights held up?
@731Woodworks
@731Woodworks 2 жыл бұрын
I've only had them for just over a month but so far so good. A friend of mine has similar ones (same name brand) and had issues with them flickering and going out. He reached out to the maker and they sent him 10 lights, no questions asked.
@lolmynameisChris
@lolmynameisChris 2 жыл бұрын
What frame rate and shutter speed do you shoot your videos at? I have these lights too, but at 24fps/50 I get banding on my videos.
@randygeorge566
@randygeorge566 2 жыл бұрын
Matt have you ever had another woodworker that is a big fan of yours ever come to your shop and work alongside of you for a week and if you have would you ever do it again and if you haven't would you be interested in doing that
@731Woodworks
@731Woodworks 2 жыл бұрын
No sir Mr. Randy, I haven't done that before. Maybe something we can look at in the future.
@randygeorge566
@randygeorge566 2 жыл бұрын
@@731Woodworks ok sounds great hope u have a great day can't wait to see more content
@fawnnnb
@fawnnnb Жыл бұрын
We're did you get these.
@kdmigloo
@kdmigloo 2 жыл бұрын
Junk.............
How To Install LED Shop Lights On Ceiling In A Garage - Barrina LEDS!
15:04
The Excellent Laborer
Рет қаралды 34 М.
Когда отец одевает ребёнка @JaySharon
00:16
История одного вокалиста
Рет қаралды 16 МЛН
Fake watermelon by Secret Vlog
00:16
Secret Vlog
Рет қаралды 30 МЛН
How I Turned a Lolipop Into A New One 🤯🍭
00:19
Wian
Рет қаралды 12 МЛН
When mom gets home, but you're in rollerblades.
00:40
Daniel LaBelle
Рет қаралды 70 МЛН
How To Install The Proper Shop Lighting! DIY LED // Dream Shop Build 4
12:06
Third Coast Craftsman
Рет қаралды 135 М.
Simple Workshop, Shed or Garage Lights
16:15
Proper DIY
Рет қаралды 139 М.
Yellow Warm Light Screen HD - 1 hour
1:00:01
My Bright Light
Рет қаралды 290 М.
Barrina LED Shop Lights - The Best Lights for Your Garage
9:43
Travelin Tim
Рет қаралды 87 М.
Don't Make These 5 Mistakes When Building Your Workbench!
11:39
731 Woodworks
Рет қаралды 303 М.
Your garage lights suck. It’s easier to fix than you think
10:02
Shop Nation
Рет қаралды 1 МЛН
What is the BEST WORKSHOP Lighting?
11:45
Woodbrew
Рет қаралды 28 М.
9 tools I regret not buying sooner
20:15
MWA Woodworks
Рет қаралды 2 МЛН
Когда отец одевает ребёнка @JaySharon
00:16
История одного вокалиста
Рет қаралды 16 МЛН