Amazon's cheapest remote start installed in our Coyote Swap F150. Push Button Start?

[@JamesBrown-xq9qd]

Thanks for the shout out boys, always happy to help JMR. Because of you I now consider myself a rebuilder which is both a blessing and a curse as you know. Royote is shaping up nice, love the remote start. Great vid !!!

[@JMRRebuilders]

Thank you so much for being one of the original subs also for contributing monthly and for all the freaking awesome tools you send our way brother. Glad we are able to help for sure and sorry at the same time. Keep getting after it brother.

[@nathanmccumber8965]

​@@JMRRebuilderswill this work on xj 98?

[@JMRRebuilders]

@@nathanmccumber8965 yes it should work

[@LunchboxQ50]

Only advice I would give is to replace all those wire nuts with soldering connections. More reliable and it makes wire tucking much easier. Great progress, guys!

[@JMRRebuilders]

I'm right with you. We usually use wire nuts to test our connections before doing permanent ones. Thanks for watching!!

[@nathanmccumber8965]

​@@JMRRebuildersif my xj already have remote start will this work I want push start because I gotta Jerry rig ignition switch to start it.

[@JMRRebuilders]

I am not sure would have to do some more search. It would have to work in connection to the existing system or you would have to completely remove the system.

[@72ford360]

Glad you like it. I love it, especially on these cold mornings when I get into a warm truck!

[@JMRRebuilders]

Heck yeah brother. Thanks for the help and thanks for the support. KEEP GETTING AFTER IT

[@tylertimmons5543]

Thank god I found this video. Got a 1995 taurus I’m gonna do this to, and these old fords are all pretty close in electronics. Definitely gonna buy it soon

[@JMRRebuilders]

Heck yeah brother good luck to you. Please consider subscribing. We would really appreciate the support.

[@drakeweaver5994]

I like that table you used to test that alarm system on

[@JMRRebuilders]

Yeah its pretty sweet built that sucker my self. Glad the onky thing you appreciated is the work bench.

[@ronbunker5778]

That is really a cool device for the money! You guys make it look easy to install too!!

[@JMRRebuilders]

Thanks brother we appreciate the support. It is a pretty sweet ayatem for sure.

[@clayyng]

I have this Kit because a friends gifted it to me due to getting another one and I opened the box and saw all the wiring and it’s been months since then😂 I think I may attempt this soon

[@JMRRebuilders]

Let's go. It really isn't that bad if you have some mechanical know how and wiring experience. Good luck

[@BigWhite002]

This is wicked! i want to put on in my 92 4runner and my 07 Tundra

[@JMRRebuilders]

Love it. It's a great device. Good luck

[@Eia_mm2.playzz]

Looking to do this in a 2024 f150. Thanks for the video

[@JMRRebuilders]

Let's go. Good luck. Thanks for comment and support

[@HattemMorse]

BOYS!!!!! That is fuggin' awesome! Such a slick set-up! Keep kickin' ass!!!!!

[@JMRRebuilders]

Heck yeah brother we think it's pretty sweet. Thanks for the support brother

[@Jepp120]

I have a 1994 nissan sentra se-r spec with a vr6 (Volkswagen swap) and ive been looking into buyine a push to start, great job on the builds you guys do cant wait to follow up for more

[@JMRRebuilders]

Thanks brother we appreciate the support. Def a sick build on your part brother. This should work for your setup good luck

[@davidarmstrong1021]

You, dudes, are awesome...I'm seeing your own show in the future!

[@JMRRebuilders]

Heck yeah brother. Thank you for the kind words. We appreciate it. Check out the rest of our content.

[@mikeswigart9521]

these kits are universal, there are fobs that match most car manufacturers. the proximity can be turned off. I've got the easyguard ec002 in both my cars

[@JMRRebuilders]

Yes they are universal. Glad to hear you have sorted it out on your end. Thanks for the comment and support

[@Gbody_Plus]

How u turn it off Cz that a lil annoying

[@mikeswigart9521]

I believe it turn ignition on to run ,not started, then hold down lock button on remote. Horn will honk I believe 3 times. It's been years since I did it

[@Gbody_Plus]

@@mikeswigart9521 ok thx

[@karlp3840]

You guys are great. Thank you.

[@JMRRebuilders]

Awesome hope it helps. Thanks for watching if you haven't please consider subscribing

[@nathanmccumber8965]

​@@JMRRebuildersI got 98 Cherokee u got any video on a/c I got recharge no leaks. Blowing hot air from vents

[@sethhooper7472]

Imma have to buy a lot of things to break when I decide to do this and the one gauge lol

[@JMRRebuilders]

Yeah man it aint that bad but so worth it. Thanks for the support and good luck

[@alfredoramos5441]

so i saw your video a while back a little but over a year ago now nd decided to give it a try myself kit work perfectly with the price couldnt be happier but recently my remote control hasnt been detecting getting detected by the proximity sensor nd even the remote wont unlock pressing the unlock button any ideas on how to fix or any other brand that will upgrade this one?

[@JMRRebuilders]

Yeah unfortunately i don't. Sounds like your reliever is bad. Could just order new one replace your existing. Good luck. Thanks for comment and support

[@babiboib7]

"Slicker than snot on a doorknob" yea that part 😂🤣💯💨

[@JMRRebuilders]

Heck yeah brother thanks you.

[@babiboib7]

@@JMRRebuilders Nooo problem 🤙thank you 🤣

[@JMRRebuilders]

Check out the full build series on this truck.

[@babiboib7]

@@JMRRebuilders Awesome!! I will do that 🤙

[@mariasalazar1669]

Convenient for sure!

[@JMRRebuilders]

Yes it is we think if ya gonna drive old school might as well have some convenience. Thank you for the support

[@mphohlongwane3809]

thanks for the awesome clip, but this system doesnt have wire for hazards lights why or how can i light my lights

[@JMRRebuilders]

Hey brother thanks for the comment and support. On the main harness there is a wire that feeds the flashers at the moment I can't remember the color. It should be in the big image diagram. Good luck.

[@mphohlongwane3809]

hi @@JMRRebuilders can i please send you email with a picture so you can show me please

[@baileypatterson6521]

just remember to also buy a faraday box for the remotes when parked as thieves use an RFID signal booster to pick up the fob signal in the house to unlock/start your vehicle.

[@JMRRebuilders]

Interesting. The thought never crossed my mind. thanks for the comment!

[@sardissozo3399]

What thief walks around with that so they can take a 1990s truck? 😂

[@samuelstephenson3535]

Getting it done guys!! It's awesome to ser the progress you are making.

[@JMRRebuilders]

Thanks brother. Nit sure she will ever be done but getting closer for sure.

[@f100feller5]

Perfect! Mr. Wilson!!! 😂😂

[@JMRRebuilders]

Heck yeah brother. Thanks for the support and for watching with us

[@bryancastruita99]

Got it hooked up! Start button works however it doesn’t turn on my accessories like radio and allow me to put it in gear unless I turn the key forward? How did you pull out the key cylinder without keeping the accs on? I couldn’t get the remote to start it either?

[@JMRRebuilders]

OK so this is a big harder to explain via text. The look cylinder actuates a lever inside column. That lever disengages the steering lock and turns on acc. You need to remove it and the cylinder leaving the truck column in the on postion. Also you need to wire acc to the alarm system. Hope this helps. Good luck.

[@pweezy68]

Loved the instruction part 😂🤣😂🤣😂

[@JMRRebuilders]

Yeah some may get triggered by it. Thanks for the comment and support.

[@Porkchop-uv6pu]

So this should work with a 79 model. It is actually a CLT 9000 cab over Ford semi, but I want to put it on. Do you have any advice or recommendations?

[@JMRRebuilders]

Just gotta know a little bout electrics to figure it out and how your door locks actually. But it can be installed in just about anything. Good luck

[@humbertoseija4647]

Great video guys that's exactly what I have been looking for to put into my foxbody Mustang, can you please share the model number on that unit?

[@JMRRebuilders]

Here the link. Good luck thanks for comment and support BUY IT HERE!!! Use our Amazon Affiliate link to support our channel at no extra cost to you! Banvie Keyless entry/Push Button Start Alarm System - amzn.to/34XmTzL

[@bomark2002]

Two thumbs up for a good CLEAN intelligent video, you have a new subscriber. ALSO….. could these be installed without the push button ignition? I would be tickled to death to just be able to get into a warm car instead of trudging thru the snow 3 times…. The three times would be I forgot my car key the first time 😂😂

[@JMRRebuilders]

Yeah i believe so but not exactly sure. Thanks for comment and support

[@bradwilliams3136]

Does the truck have to have a factory security system to make this system work? I know on some of the aftermarket systems If you don't already have the factory set up, it won't work.

[@JMRRebuilders]

No this system works independently of the factory system. Good luck. Thanks for comment and support

[@abrahamdaniyan2238]

Is there a full video to this ?

[@JMRRebuilders]

No this is it. It's not meant to be a how to video. It's just another episode in that trucks build series. Thanks for comment and support brother

[@jameshall1536]

Did this f150 already have the factory remote entry module or not? I'm wanting this setup on a 96 f350 power stroke that does not have OEM keyless entry...

[@JMRRebuilders]

We did not have power locks or windows, so we purchased another truck for those parts. The. The system connects with the trucks interface

[@mikeysousa164]

What did you hook up the oil path detection wire to? I thought it was a tach signal

[@JMRRebuilders]

I believe we just hooked it to a wire to gove it correct signal. Think it is negative feed. I can't remember any longer. Thanks for comment and support

[@mikeysousa164]

@ Thank you, I appreciate the help!

[@arinmackay6620]

So, does this system eliminate the key entirely?

[@JMRRebuilders]

Yeah man sure does. Pretty sweet bro. Thanks for the support

[@Sniped_Clipzzzy]

@@JMRRebuilders hold on, so you can pull the car into drive mode without turning the key? does this apply to 2019+ cars?

[@JMRRebuilders]

Not sure I understand the question. The ignition is controlled by the push button and allows the vehicle to be put in gear yes.

[@Sniped_Clipzzzy]

@@JMRRebuilders in other pke videos. they have to stick a car key in the ingition and turn it on to acc. you say the original key dont need to be insert?

[@JMRRebuilders]

@@Sniped_Clipzzzy correct we removed the lock clyinder and made it like the current push button vehicles on the road today. No key needed

[@pweezy68]

How’s it going guys I have a question if you don’t have remote locks nor trunk lock would you just void hooking the wires up to anything?

[@JMRRebuilders]

Yeah I'm sure that is fine. We didn't hook up our trunk wire so should be just fine. Good luck to you.

[@KeanuReevesBoss429]

What would you rate the difficulty of the wiring? I want to install this on my 94, but I really couldn’t be bothered messing with wires that are super difficult to install.

[@JMRRebuilders]

Well, it isn't at all intuitive. So if you're not unto it, it may be frustrating. Good luck. Thanks for the comment and support

[@KeanuReevesBoss429]

@@JMRRebuilders Thanks, I’ll see what I’m working with when I get the kit. I might have to pay for someone to install it if it’s too complicated for me😂😂

[@JMRRebuilders]

Let's go.

[@IkeReedy]

This is so cool 🤘

[@JMRRebuilders]

Heck yeah brother thank you so much for the support.

[@HowTwo007]

Its been 2 years. Does it still work? Want to get this. But don't want to be left stranded on the road. If i install the push button And then can't start my car

[@JMRRebuilders]

@HowTwo007 yes it still works. Buy 2 keep one in truck and keep spare batteries. Thanks for comment and support.

[@iwens1966]

Ohh, and it looks like you are using the OneGauge. This is an awesome project. I'm doing a 12 valve Cummins swap into an 29', 80s Class A RV and I am planning on using the OneGauge and keyless. Why? The real question is, WHY NOT!?

[@JMRRebuilders]

Heck yeah brother love it. We love one gauge great company and product. The push button is a bit harder but worth it good luck brother.

[@TruckHoss]

Thanks for video. How does the system know how long to crank the engine for? What happens if the truck doesn't start after the first few seconds of cranking. Thanks

[@JMRRebuilders]

Cranking is based on the factory vehicle and it relieving the start signal from device. It works flawlessly. If the truck doesn't start after the signal sent nothing happens.

[@Soccerking10099]

Would you be able to get provide a wiring diagram? Or where can I find a wiring diagram to the ignition switch

[@JMRRebuilders]

Hey thanks for the comment. We used all data diy to get the wire diagrams. Good luck.

[@reyhernandez4360]

Thanks fb or this video

[@JMRRebuilders]

Hey brother is that how you found us through Facebook? Either way thanks for the comment and support.

[@craigtaberner9489]

How does it work with current alarm systems ?

[@JMRRebuilders]

Unfortunately we really don't know we never installed on in a vehicle with an existing system. Good luck and thanks for comment and support

[@pryotex]

Any long-term comment on how it's holding up?

[@JMRRebuilders]

So far so good. We are happy with it for the price. I think there could we a better sensor for vicinity and motion but it's great for the price. Thanks for comment and support

[@DwightHensler]

Loved it. Is that your jmroyte kanban on the whiteboard in the background?

[@JMRRebuilders]

Lol. I have my kanban on Trello and that one is for Ryan, and he calls me old!!!???

[@maxlaurman1038]

hey guys on minute 4:50 you could here the starter, but it didn't cranks, couple seconds later it did crank! how did you manage to do that? Mine still won't crank, but you can hear it click! Please help me :)

[@JMRRebuilders]

I believe it was the low oil switch or brake switch we had to bypass. Good luck and thanks for comment and support

[@AintScaredGarage]

The question I have is will this work on an original 95 F150, and what do you do about the old key start

[@JMRRebuilders]

Yes it absolutely can work on the obs truck. The original key goes away and the push button goes in its spot. Let us know if younneed any other help

[@AintScaredGarage]

@@JMRRebuilders Cool, I'm a have to do that

[@jacobsigman3713]

@@JMRRebuilders how hard would this b to install my truck don’t have power locks or any of the goods plus it’s got the 300/6 with a 4 speed manual and it’s a 95 reason

[@JMRRebuilders]

It obviously won't work on door locks however it wouldn't be that hard. You would get the remote start feature and push button capabilities. Good luck

[@jacobsigman3713]

@@JMRRebuilders so ordered one from easygaurd my question do I connect all the acc wires to the one that the kit says is acc

[@lionelbutnotrichie7703]

What if your vehicle has a factory alarm. Most aftermarket remote starts/alarms have a 'factory disarm/rearm wire but this unit doesnt.

[@JMRRebuilders]

Yeah no clue on that one. If that's the case then would look for a version that fits your install. Good luck

[@tysonsanchez1322]

Can you tell me what wires I’m tying into on these trucks ? I bought the same system basically but all i need is the ignition. Everything else is manual. Any tips I would appreciate. It’s confusing!

[@JMRRebuilders]

Hey brother I am not sure which wire to use. We did a coyote swap so we just hooked it up to the start wire on the coyote. There is a large red and green wire behind the dash cluster that maybe the one you need but not sure. Good luck

[@tysonsanchez1322]

Thank you for the reply. I ended up figuring out how to wire it in and bypassed the break to the accessory two wire so it starts after the initial press and if it doesn’t, you can hold the button on the second as long as you need. For $25 I am impressed and it even came with an antitheft feature with little tags that you have to scan. Your video was still a good watch. Thanks for the content.

[@tysonsanchez1322]

@@JMRRebuilders this truck has also not ran in 19 years and I finally got to hear it run yesterday

[@JMRRebuilders]

Heck yeah that is awesome

[@ReptarART]

How you guys liking the system thinking about getting this on my 91 f150

[@JMRRebuilders]

It really isn't a bad system could use some minor adjustments and takes a lot to figure it out since none of it is clear on installation. That being said for the price and capability you can't beat it. Good luck.

[@reefghost7595]

JMR you say it needs minor adjustments but you don't say what those may be. In the video it seemed to not work initially. Or " bind up ". Especially when standing near the car for an extended period. I have one just have yet to install. No professional wants to do it. There's no us customer service or dealers. Also the professional installers say after time they simply stop working or pke malfunctions. Please give us a followup video or Information on the product please.

[@mikeswigart9521]

I have had one in my car for 6 years with no problems. And I have also installed 5 others For family and friends and they have been all Different cars. No issues from any of them So far. It’s been at least 2 years. I have Only installed the easy guard ecoo2

[@lopeiaran3422]

I was thinking about installing this but I was wondering if it’s required to install the push to start button, I just want the keyless entry and remote start. Thanks!

[@JMRRebuilders]

I believe you can do it without the button. Good luck we appreciate the support

[@flemingisland4208]

I want to buy this. I have a GHOST JDI PUSH TO START CONVERSION KIT on my 2012 Honda Accord. I just want to use the Wireless Key Remotes to work with my JDI system. Is that possible?

[@abdouallahuniverse5689]

Me I cut or uncover 6 wires under the dash board and 2 in the steering wheel panel looking for door lock unlock but the were basically inside door panel itself, you need to remove door cover and hook them to door negative wire, and also I was looking to connect the flasher wire to the the turn signal wire in the car but they were just behind the emergency signal button panel. Sometimes the engine diagram is not perfect. Even I had to test wich ignition wir is acc and wich is starter and wich is ignition 1 and ignition two. It crazy, the hardest part is not the keyless system wiring but finding the right wires in your car.

[@JMRRebuilders]

That's some great feedback. Love it.

[@angelconesallc4153]

Something I like from my old 350 is that I can start it and wit out stepping on the break.. can I have that wi this ? or is not POSSIBLE ?

[@JMRRebuilders]

Well you can remote start it with remote. To start it inside have to press the brake since it has a brake sensor switch. Thanks for comment and support

[@dominicgonzales4891]

How’s this system hold up I’m thinking of installing in my truck

[@JMRRebuilders]

It's OK gotta keep spare batteries on hand for when the fob dies but other than that it's great. Thanks for the comment and support

[@LuisGomez-ez8iu]

Loved your video! What is the max distance that you can remote start the truck?

[@JMRRebuilders]

Great question we never tried that. Thanks for comment and support

[@jujurock64]

Would this system work on a 1996 f350 7.3? It would need the delay for the glow plugs? Any chance u guys near NYC I’d rather pay you to install. Ain’t gonna lie I’m scared to cut wires in my truck lol… great video thanks guys

[@JMRRebuilders]

Hey brother thanks for the comment and the support. Unfortunately we aren't anywhere near new york. It should work for a diesel as you mentioned would Def need the delay for glow plugs. It is doable for sure just takes time and patience. Good luck brother.

[@chrish1695]

how reliable has this been now that a year has passed? my actuator rod broke on my 95 so I'm thinking this would be a good solution thanks!

[@JMRRebuilders]

It has been great has a lot of kinks to work out and been some what frustrating. But once it is dialed in its a great system and the benefits ate great.

[@Multi68stang]

Can you still lock the doors manually while the fob is in the vehicle and the vehicle is running?

[@JMRRebuilders]

Yes you can for sure. Let us know if you need anything else and good luck.

[@Multi68stang]

@@JMRRebuilders Thanks for the quick reply. Looking to do this to my ‘14 F150 and now just trying to figure what I need to do to bypass the signal from the original keys chip and what to do to the original opening for the ignition cylinder.

[@JMRRebuilders]

Yeah that is a good question. I am certain there is a way can't imagine there isn't. Good luck may the internet be in your favor

[@xxZerosumxx]

Does the a/c turn on when you remote start?

[@JMRRebuilders]

Yes you can set it up so that it does. Thanks for comment and support.

[@kimanikariuki6969]

What type of car's can you install the alarm

[@JMRRebuilders]

It can go on just about anything. It's up to your ability to make it work.

[@Zack-smith]

I wanna install it on my 1989 gmc sierra classic s15

[@JMRRebuilders]

Def doable. Good luck

[@cpgchapo5477]

What if car is in anti theft mode will connecting this jump it to the new system will it bypass the red light and start or do I have get original key programmed again then connect this

[@JMRRebuilders]

Hey brother I am not sure this will slove your problem. Sorry. Good luck

[@aceaaron19]

What did you use for the "oil feed sense" wire that shows the fuel pump motor? I was just going to put 12v constant to it.

[@JMRRebuilders]

Well we have an after market motor so we taped into the oil pressure sensor to get our signal. Thanks for the comment and support. Greatly appreciated.

[@312ezii]

do these kits work on cars that had chipped keys?

[@JMRRebuilders]

The key would still have to be near the column to somehow work I would assume. But I really don't know

[@312ezii]

@@JMRRebuilders maybe il take the chip out of the key and put it in the key fob

[@DeepSouthBayouDiesel]

Why was it flashing in the first place? I'm dealing with the same problem

[@JMRRebuilders]

I believe the issue was we didn't have the brake wire or another wire connected. Thanks for the comment and good luck

[@DeepSouthBayouDiesel]

@@JMRRebuilders thank you for replying back...I pressed the reprogram button and got the button to light up solid. Everything works except for the remote start and the two brown wires for the lights to flash aren't working. I did a kit similar to this one on my mustang and everything turned out great. This is kinda driving me nuts 🤣

[@JMRRebuilders]

@Wolf Lord yeah they can be fickle. I'm sure it is something simply like you just sorted. Good luck to ya brother.

[@DeepSouthBayouDiesel]

@@JMRRebuilders you're absolutely right. I'm wondering, did you wire up the E brake? My kit came with a 7 pin harness and it shows the 2 brown wires are to be used for either the park lights or one wire to the trunk release and the other to the E brake.

[@DeepSouthBayouDiesel]

@@JMRRebuilders I'm sorry to keep bothering you. Disregard my last comment. My remote start finally works now. So with this kit, there's a 7 pin out harness. The main two wires that troubled me were the brown with white stripe and brown with black stripe. The options were use the two wires on a positive output for the lights to flash or use brown with black stripe for trunk release and brown with white stripe for hand brake check on negative output. Since I installed the kit on my 02 f150, I went with the logical choice of using the brown wires for the flashers. Anyhoo, thanks for the video and advice, you've been more than helpful. Hope all's well 👍

[@WilliamCronin]

How did you guys figure out finding the right wires on the fuse box?

[@JMRRebuilders]

Looked up a wiring diagram. The haynes manual has a good one. Thanks for the comment !!

[@quintonbampton8391]

Hi can this be installed in a manual transmission car

[@JMRRebuilders]

Yes it sure can just make sure you don't leave it in gear. Good luck

[@Gbody_Plus]

Got this and it nice but kinda sucks one time it wouldn’t turn off and just kept trynna start it while it was on so I just reversed and parked again and I was able to turn off after a min or two almost messed up my starter and the remote start doesn’t work it does that unsuccessful start that’s described in the manual

[@JMRRebuilders]

Thats rough for sure. Thanks for the support and comment.

[@captcash888]

Ryan, couple of questions. Did you have to bypass the key? How did all that work? Also, do you work for Duke Energy?

[@JMRRebuilders]

Hey brother gotta say your the first to ask a question directly to one of us by name. Really neat. Yes in our case since our key unlocks steering column you have to by pass the mechanism. We simply found the piece that is engaged by the key clyinder and disabled the mechanism. I do not work at Duke. Would love to know why you ask that though. Thank you for comment and support.

[@davidmendo6594]

I lost my key of my truck will it work still????

[@JMRRebuilders]

Well that sucks. You can get new lock clyinders with cut keys online. Sorry not much help. Good luck to you.

[@OBXdream]

If we wanted to install this on a diesel, how would you recommend to incorporate a delay for the warmer for the plugs (6.0L Ex)? Just looking for thoughts and recommendations.

[@JMRRebuilders]

I'm not sure on that one. I know a couple guys mentioned doing it on one of the Facebook groups. I know it is doable but uncertain on how. Good luck brother

[@Multi68stang]

From the instructions I’ve read you can turn on the ACC functions by pushing the button once without applying the brake pedal as the button will not start the vehicle without the brakes engaged.

[@JMRRebuilders]

Yes that is correct. I believe he is asking ore for the remote start option as well. But that is definitely helpful. Thanks

[@Venomhatch2]

First off great video! Are you guys in FL and want to get hired to put one in my car?

[@JMRRebuilders]

Hey brother, thanks for the comment and support. I used to live in Florida. Unfortunately, we can't really take on that project. Good luck

[@flare170]

How has it held up after a year?

[@JMRRebuilders]

Still works great and has not had issues. Good luck

[@flare170]

@@JMRRebuilders awesome, thanks!

[@XellosMetallium]

Can make a video explaining how you got your door locks working? This is the hardest part for me and I don’t even understand the instruction.

[@JMRRebuilders]

I remember this being a major pain. I had to look up what kind of lock triggering system we had on our truck and then use the proper diagram. Do you have the wiring diagram that came with the unit??

[@JMRRebuilders]

Here are links for wiring diagrams for the locks. It' as much as I can help really.. Worst case senario is find all the wires and label them, then try the various configs for triggering and give it a try (at your own risk). This is what I would do. cardiagn.com/kia-cerato-forte-ewd-power-door-locks/ --- full diagrams here - cardiagn.com/kia-cerato-forte-2019-2020-full-electrical-wiring-diagrams/

[@londonbrokar3524]

i have a 1994 ford f150 and i have the same system as you guys, i have the push button working but not the lock and unlock, and i also try to use the remote to start it and it starts for a second then shuts off. Is there anyway you guys could show exactly which wires go where? It would help a lot

[@JMRRebuilders]

Hey brother thanks for comment. Unfortunately we don't have any photos of the wires for the door locks and it took us some trial and error to get it right based on the different wire setups. The remote start thing make me think your oil pressure wire. We just ran it so it get signal at all times. Thereby bypassing it. Hope that helps good luck

[@londonbrokar3524]

@@JMRRebuilders So would it be okay if i just hooked it up to a 12V constant?

[@JMRRebuilders]

@@londonbrokar3524 yes but do realize it will not be a safety that it was designed for

[@londonbrokar3524]

@@JMRRebuilders okay thank you👍🏼

[@londonbrokar3524]

@@JMRRebuildersso i got the remote start to work! the only thing i have left is the lock and unlock. did you guys have to use a special relay for it to work? i got sent a “free relay” with the kit.

[@kellerpower7545]

Is there a link to the product?

[@JMRRebuilders]

Yep. Thanks for watching. Banvie Keyless entry/Push Button Start Alarm System - amzn.to/34XmTzL

[@LaverneDefaziox]

How did you install button in the ignition port?

[@JMRRebuilders]

Hey thanks for watching and commenting. We took the factor key clyinder out and locked it in place then put the push button in its location.

[@lowsatanas]

When you did that you had to have it in the ACC/ON position correct? If so how do you keep it from draining the battery while off if you understand?

[@blackincawston]

Hi there, do you think it will work on a mid 90s gm truck

[@JMRRebuilders]

Hey brother thanks for the comment and support. It absolutely will. You will need to sort our wiring and such but yes it will. Good luck

[@lukevmh]

does it still work after a year?

[@JMRRebuilders]

Yes it does love it. Thanks for comment and support

[@AiiRSTRiiKEOFFICIAL]

How do you replace the battery

[@JMRRebuilders]

Glad you asked. Here the video kzbin.infoEe7ASjbbIBU?feature=share

[@boostedhatch5566]

That proximity unlock/lock may get annoying at car meets/ shows etc

[@JMRRebuilders]

Yeah thats a good point for sure. Thanks for the support brother

[@X10Pro]

A youtube video of guys watching a youtube video, then not linking the youtube video you watched.

[@JMRRebuilders]

Great stuff. Thanks for comment and support

[@austinduncan1271]

Would a person need keyless entry to use this?

[@JMRRebuilders]

This system comes with Keyless entry as well. Thanks for the support and comment

[@ccyberhub]

What video did you guys watch to install it?

[@JMRRebuilders]

We didn't there isn't one. We just figured it out as we went. Thanks for comment and support

[@ccyberhub]

@@JMRRebuilders Why not making one if you guys know the process i'm thinking of getting one but I don't want to mess up my car lol

[@JMRRebuilders]

Thanks for reaching out and that would be a great idea. Unfortunately we are not really a how to youtube channel and isn't something we really want to do. The system is worth 50 bucks and can be easily installed if you have the mechanical know how and desire to get it done. Good luck

[@martinonumero]

How do you turn on the car to use the radio without turning on the engine?

[@JMRRebuilders]

Hey brother thanks for the comment and support. You press the start button but don't put your foot on brake and it goes into acc. Good luck

[@martinonumero]

@@JMRRebuilders ok thank you, so you press it twice without putting your foot on the brakes to go into ON to be able to wind up the windows?

[@JMRRebuilders]

No just once for acc as long as foot is not on peddle. Also can wire in the windows to be controlled by the remote. We just not to

[@martinonumero]

@@JMRRebuilders ok thanks again

[@JMRRebuilders]

Yeah man no worries

[@HeliosFire9ll]

Is this a universal?

[@JMRRebuilders]

Yes it is and can be installed on any vehicle. Thanks for the comment and support.

[@davidmendo6594]

does it needs a key??

[@JMRRebuilders]

No it doesn't however you will need the key to get the clyinder out and remove steering lock

[@zackengland1731]

I have a 1995 7.3 powerstroke I can’t find any wiring diagram to hook this thing up any way y’all could help me

[@JMRRebuilders]

Hey brother we don't know all that much about the 7.3. However there is a way for you to get full wire diagrams. Go to www.alldata.com/diy-us/en/find-vehicle Put your year make model and they should have what ya need. Good luck

[@ronriggs9954]

At the very end... was it the truck that was starting up via the remote?

[@JMRRebuilders]

Ya buddy. Pretty slick. Thanks for the comment Ron

[@dom3489]

You guys so show us in a video which wires you used

[@JMRRebuilders]

Thanks for watching. If you would like that info message us on Facebook or insta, and we will help ya. We appreciated the support.

[@SamuelCaldwell-d2v]

What's the Amazon code

[@JMRRebuilders]

We don't have a code. Here is the link Banvie Keyless entry/Push Button Start Alarm System - amzn.to/34XmTzL

[@sedrickhudson2773]

What brand Is this

[@JMRRebuilders]

Here is the link. Thanks for watching and commenting Banvie Keyless entry/Push Button Start Alarm System - amzn.to/34XmTzL

[@WilliamCronin]

any idea what happens if your key fob is dead will it still start?

[@WilliamCronin]

can you just place the dead key on the button and start it?

[@JMRRebuilders]

No clue on that I imagine the answer is no. One of the guys we know who did said he keeps a spare set in the truck

[@JMRRebuilders]

No clue

[@sergiomunoz3372]

Is universal?

[@JMRRebuilders]

Yes it is universal. Would highly recommend having a complete vehicle wire diagram before beginning

[@jessef542]

So I can put this on my 2001 ford f150.

[@JMRRebuilders]

Sure it is universal so could be put on just about anything. Good luck

[@williambenson1695]

What’s the name of that brand? 😮

[@JMRRebuilders]

Hey brother thanks for comment and support. Here is the info on it. Banvie Keyless entry/Push Button Start Alarm System - amzn.to/34XmTzL

[@atlantaswelder]

🔥🔥🔥

[@JMRRebuilders]

Thanks brother

[@1962rag]

My push button stopped working all the sudden, Bought a new one and installed it but that wasn’t the issue. Any help??

[@JMRRebuilders]

Well it has to have oil sensor wire to start and the brake wire sensor. I would try those and see.

[@lukevmh]

CAN THE CAR BE STARTED WITHOUT THE KEY NEAR THE CAR ????? IM SCARED OF MY CAR GETTING STOLEN.

[@JMRRebuilders]

It is a proximity sensor system meaning the systems brain cannot activate without the key fob being near by. So no it can't

[@lukevmh]

@@JMRRebuilders nice thanks! i dont want someone to get into my door somehow and jusst be able to push the button and drive away if im not near the car

[@BlueJeanF150]

How flexible is the proximity lock system? Unlock is awesome but I think I’d rather have manual control over locking. If you’re getting in/out a bunch, the locking might get annoying. Push button start and the proximity locks are something I thought was dumb until we bought my wife’s Edge. I also thought remote start was dumb until I had it 🤦🏻‍♂️ Great work as usual guys, how much more do you have until it’s “done”? Are you doing paint, vinyl wrap or leaving as-is?

[@JMRRebuilders]

Hey brother thanks for the support. The proximity sensor aren't adjustable at all. Best if working on it to leave key in cab. Yeah that remote start auto unlock and push button really make it nice and convenient. We are hoping to start body work soon then and complete paint. We do have the ac to finish next video. Then once paints done a couple more upgrades and she's done.

[@BlueJeanF150]

@@JMRRebuilders also cool the fobs look like they kind of resemble a Ford factory fob. Looking forward to the next one!

[@PlumberWRX]

Niceeeee

[@JMRRebuilders]

Thanks brother.

[@criselydelagarza9839]

Yall should of used a toner. Would of helped a lot.

[@JMRRebuilders]

What do you mean about a toner? Thanks for the comment and support.