The PERFECT Tool Pouch Set Up For 2024

This is my favorite tool pouch, the Veto Pro Pac DP3. It is the perfect size to carry a small amount of hand tools and an impact with some bits. I have mine filled up with Klein tools and a Milwaukee M12 impact. The pliers set from Klein is one of my favorite sets of pliers.
THE VETO PRO PAC DP3
amzn.to/4e6STjM
THE TOOLS
Klein tools insulated tool kit: amzn.to/3QGLTQx
Klein tools 7-1 impact nut driver set: amzn.to/3UVb2cy
Klein tools level: amzn.to/3UVlf8P
Wera bit check: amzn.to/4aIjgth
Milwaukee M12 Fuel Impact: amzn.to/3R9EZ6B
THE WATCH
shop.diywatch....
Follow us on Instagram: www.instagram....
#electricianstools #toolpouch #vetopropac

[@crazypapercreations3626]

Just wanted to say what an amazing thumbnail

[@americanelectrician]

Much appreciated 🙌🏼

[@cartharax4308]

I do low voltage, camera installations, network racks, etc. I thought I found the perfect pouch in the MP1X but it was missing a pouch for termination plugs and I was looking for a compact zipper pouch to clip on it then I see you drop this with the Velcro pouch and drill holder and I was instantly sold! May actually be the perfect pouch for me and my coworkers.

[@cartharax4308]

On a side note, it may be just a little too bulky for some of the spaces I get into, so the MP1X may still be the better choice, if anyone wears them, let me know how it fits and if it gets in the way

[@stringlarson1247]

@@cartharax4308 I've got the TP3B and a TP2 as well as an old Occidental Leather for the same reasons.

[@wackyweyland8857]

​@cartharax4308 Obviously, you can still navigate a doorway, but I wouldn't go into a crawlspace with it. It's uncomfortable if you use the adjustable clip because it sits to high, so you're going to want to pass it through your belt. At the same time though, it comes with a handle so you can carry it in like a tool bag.

[@cartharax4308]

@@wackyweyland8857 Yeah its a tempting one, I think I decided to get the MP1X though, it fits more of what Im looking for.

[@bradbuchanan9326]

Always loved the cushion grips on the Klein drivers! I just can’t get used to the ergonomic ones like Wera, Milwaukee, and Wiha. I feel like I get a stronger grip on the larger handle.

[@mauriciocampuzano6828]

Just ended last night, I definitely took advantage!

[@wackyweyland8857]

Thanks for letting me know about Vetos promotion. I am ready for next year. 😁

[@stringlarson1247]

I just modified mine (prev. version). Cut off the heavy velcro flap (tho I can stick it on for the tape holder if needed) which opens up that pocket. Also, made a 1" leather handle attached to the belt loop so I don't have to deal with the handle when it's on my belt with other pouches. I just drilled out some holes and used Chicago Screws to fasten it rather than rivets (a little Loctite Red will go in when I'm satisfied with it). Big fan of the Milwakee M12 stuff as the option of 2 battery forms is awsome. 18V stuff is too heavy/bulky for most things I do. For the impact and other tools, I've been using the Spider setup - a hook worth a look.

[@emcinc9654]

You do a great job with your channel. Licensed master electrical contractor. Most of my hand tools are pretty much Klein. I should get a new set of linesman’s like the orange ones. I still have the old blue ones that are pretty stiff.

[@synthetictruth671]

I come from hvac but i swear by 12v everyone hates on it but idc it is the best. M18 is cool but if your climbing around in tight spots doung real work fatugue isnt really a problem i wanna worry about 😂

[@MattHmm-rq6dn]

Hvac you cab really appreciate a m12 surge. The metal ducting really does get loud when your in the thick of it.

[@mvilla235]

I have this pouch, used it with the clip, felt weird and pulled down my belt from the weight. I put it on a tool belt but not practical. I could just use the carry strap to carry around with me, idk. How do you use it? Clip? Belt loop? Carry? Thanks.

[@clandestinemurk5292]

Just got one with my TP-LC and I have to say it’s so legit. 🙏

[@americanelectrician]

Loveee the TP-LC!

[@dejesusvelazco3347]

Acabo d encargar esa cinta klein🎉

[@americanelectrician]

It’s a good one!

[@codyhoward6509]

I keep a wiha pocket max insulated driver in my bag

[@kiralypeter88]

Mee too. Pocket max and speede 2 are always in my pouch.

[@Jtx_Tools]

Great vid! I knew you’d come around on the Klein Screwdrivers Those and PB Swiss are my Top Two favorite Screwdriver Brands

[@MattHmm-rq6dn]

I stuck mine on a diamondback 701 vest and it works OK. I would like if rhe pockets weren't so anged and the back clip is about useless since it puts the leather tunnel in your kidneys. They definitely left room for improvement.

[@mvilla235]

I’m having the same issue. It’s not a comfortable pouch to wear. Either too high or too low. I then put it on a belt but it bounces on my hip/thighs. If I have a bit on my impact it’s even worse. I can’t find the “right” way to wear it. Otherwise it’s an amazing pouch for carrying essentials.

[@bowlerhatguy72]

Does it fit the installation driver in the pouch?

[@OnusBones]

Yes, it does; my wife carries hers that way. I have one DP3 set up for car emergency tools; a lithium ion jump starter fits in the drill section. Another is my at-home DIY pouch, with a parts box in that pocket.

[@Iam_jardow]

"Hmm i think ill click the link on the watches" Sees price. "Yaaaah f that" lol

[@streetengineer9454]

Please i really love this profession and I'm willing to work for you as an apprentice. I don't want my dreams to die due to some circumstances. Kindly help me sir.

[@austinantoszek301]

Can this fit m18 driver?

[@americanelectrician]

Yessir

[@chickenfoot713]

Most rechargeable lithium batteries are very affordable

[@CarlGreen01]

Glad to see you are moving back to ‘Made in USA’ ….. you were starting to lose your audience…. We aren’t partial to tools with pretty, colorful handles …..

[@iEliseoForPresident]

Does no one just put their impact on their tool belt with the Milwaukee clip anymore ?

[@2ballsyourjaws]

Falls too much and I don't like replacing tools. Those hangers just aren't reliable unfortunately without buying nice ones

[@americanelectrician]

It’s just way easier to use a pouch like this

[@juliomartini4543]

You don't use your tools much. They are brand new.

[@jakobthorpe8233]

Not sure if you missed, but at the beginning of the video he said that he just did a haul of new tools for this year

[@americanelectrician]

@@jakobthorpe8233yes

[@MattHmm-rq6dn]

Some of us actually clean our tools and take care of them like our livelihood depends on it. For alot of us self employed or even working for another company they have you provide your own tools. If it was me I'd rather not be buying forged wire strippers and pliers wrenches more than once. If alls it takes is a wipe of houdini at the end of the day or between jobs I'm gonna takes that few minutes.

[@cleasonleasure4832]

Will this bag last as long as my Klein pouch that I got in 1979

[@dusk7720]

I have one. I’ll get back to you in 44 years and let know know.

[@mang6654]

Probably bc they never actaully get used

[@cleasonleasure4832]

@@mang6654 by the way I used to carry a makita 7.2 drill in the pouch.( for trim out) my 12 volt driver fits also. But I don’t were a pouch , last 6 years!

[@jaybadass2318]

@@dusk7720lol can you tell me too