1999-2004 Mustang GT Handling Pack- Bolt-On Build-Ups

[@angelgjr1999]

This is a must for a Mustang if you live in the east coast where there are lots of corners. Without it, my Mustang handles like a truck.

[@kellettcox7253]

yessir south carolina just different lol

[@koolezekiel]

i got 2000 amazon green mustang v6 (5speed) as my first car a few weeks ago and im slowly fixing up the exterior! 1999-2004 is def my favorite generation of stangs!

[@austinharrison2453]

Me 2

[@BPeezy315]

I'm a GT owner and i respect the hell out of you and your v6. i helped add a full exhaust (headers back), Cold Air intake, Tune, and short throw shifter in my friends 2006 V6 pony package. sounded great and drove great. He always said, "you've got the power but i make 30mpg". nothing wrong with those numbers lol.

[@PayDroification]

I drive a Mustang, a 3.8l. But my repsect for the cocky bastards who drive 4.6 GT's is there. In other words, I don't pretend, especially in a 6 cylinder, to be the bad ass of the road. I give that title to the GT owners. In a way, if you can afford a GT, heck, you have the right to brag. You were doing something right. Me? I own the Mustang for it's soul. What a beauty of a car. I'll be saving up for a GT sometime soon! btw, thanks AM, for educating me on the Pony name, and it's heritage.

[@LuisHernandez-sy2ce]

9 years later i hope you have a GT. More people should be like you

[@starkillerbeats420]

Hope you got that 2v to!

[@hhasslinger9601]

​@@starkillerbeats420 Same here. 2vs are the best sounding modern mustangs out there.

[@andrewmoutray]

I did not change my shocks and struts when I lowered my car. H&R supersports, steeda bumpsteer, MM caster camber, upper and lower rear control arms. 6 months now with no problems. Handles way better than stock, no compromise in handling.

[@TheBadwass]

For this year you don't need the Caster Camber plates to align it with only a 1.5inch drop just did mine with eibach springs and it aligned just fine.

[@XtremeJuggernaut]

3:01 you took the turn at like 30mph. FLOOR IT!

[@andrewmoutray]

It allows more caster and camber adjustment than stock so you can compensate for the change in suspension geometry from lowering the car.

[@chrismahar628]

Id do the lowering sprigs, but Im really afraid of scraping on the driveway as I enter it

[@nedaCFilms]

I absolutely hate the factory "4X4 ugly wheel gap"... Sweet looking New-Edge Mustang!

[@Spitfirerulzyou]

God, right when I saw that, I scroll down, read this... and I nearly choke on my dr.pepper laughing. Good job.

[@bbowling1989]

stock manifolds, off road x pipe and flowmasters. watch the performance build on this car. Shows all the stuff they done to it.

[@WildcatWarrior15]

My 04 GT has been on H&R SS's for a year now on the stock shocks. Not a single issue. While it may be ideal, I don't think it is crucial.

[@Bers3rk_tv]

Yo btw AM what ever happaned to Projecg Blackout stage 3&4???

[@TheJackSparrowReal]

My friend has an 03 Mach 1 (its way lower than my car) and I have a 02 GT, his is lower than mine and after I replaced all 6 shocks (Rear, Quad, and Front) it felt like it handled just as good as his and mines stock height. Only thing is I don't have to worry about dips or bumps in the road like he does. This is more of a preference thing to be honest, or my after market shocks are extremely good.

[@TheJackSparrowReal]

*ALMOST JUST AS GOOD* sorry forgot the almost.

[@PotentialScammer__]

I have all of these on my 2000 gt and might I say it feels like I am one with the car and i actually look foward to driving to school every morning in my gt lol

[@jamesa6272]

Long Branch Penny Whistle I am the opposite. I have engine bolt ons and love the motor bolt on work. Spent money on ford racing lowering springs and koni orange str shocks and struts but I hate driving it because it handles horrible. I need to have sand bags over the back shock towers to keep it down or it feels horrible over bumps. What shocks do you have?

[@PayDroification]

Great parts!

[@Bers3rk_tv]

If and when I win the lottery. I'll buy me a nice house, and next to it build the entire AM garage down to the spec. Bc this is one sexy looking working station they have.

[@jamesa6272]

What about shocks?

[@Jaes2KGT]

was the car lowered with rack bushings, bumpsteer kit and x2 balljoints? Mine has everything but the x2's and I have a 1.8" drop and my wheels have more gap than that.

[@admiraljimmy]

Are the 99-04's supposed to understeer? o.0 Confused my 04 GT doesn't understeer it's pretty nuetral in corners if anything it oversteers a tad but it's got the factory shocks, struts, springs and to my knowledge the factory sway bars. Could have to do with the back tires being 10mm wider than the front? Only thing I know of that isn't the factory set up lol. Either way I plan on doing something like this except with coilovers instead of lowering springs.

[@BartleDoo1536]

Better then US Top Gear.

[@EuroRicer]

Yeah we need Foxbody stuff!

[@loku1125]

I'm pretty sure my mustang came stock with a strut tower brace

[@seanf01012]

Quick question. Before you installed the lowering springs, what size rims did you have on the car. Thanks

[@bearkid4u]

i was thinking of installing this same Strut Tower Brace using threaded rivets or jacknuts. what do you guys think? would it hold up? or rip out? lol

[@jk2626261]

How come you guys don't do any videos on bolt ons for foxbodys

[@TheKipinator]

they should note that if you add lowering springs without changing shocks to shocks that match, it will ruin your ride and shocks, compromising the handling as well

[@biglogdtt]

Theynare 18 inch bullits. It was on the apearence pack video

[@guitaristwagner]

how does the mm caster camber plates work?

[@diordyrek2937]

What is the exhaust setup on that mustang?

[@jamesa6272]

Dior Dyrek sounds like flowmasters.

[@jrcautomotive4319]

Can I do this to a Mach 1?

[@Julieness61]

My 2000 GT was tired. I rebuilt the motor to fly, have new clutch, now I need everything to make this baby hug the road, for those times I leave a tailgater in my dust.... I need a stabilizer bar, 4 shocks (right?), please tell me what else (everything I will need and part numbers, if possible) I need to make my handling excel. I want to turn on a dime and get change back. Thank you lots, fellas. Also, I have a 67 Mustang GT, 390 T-Bird Special, 4 speed, 74K orig miles (it was grandpa's). I need a new 390 block. Any suggestions?

[@shit311]

yeah true... I have no money to change them though.. lol

[@chibbinzTV]

How much would all this cost though?

[@ReIIoaded]

yay

[@PayDroification]

Haha, well, that part was simply just to tease ya guys. But I know parts are out there for 6 bangers, but I don't want to invest too much into this model.

[@Magnum5.9360]

People say the 99-04 2v is slow that’s bs I’ve seen them hit 0-60 in well under 6 seconds which the 05-09 3v GT does

[@Enduro300rr]

97 Explorer a lot of people forget its an early 2000’s car. No it’s not a coyote, but the power to weight is enough to get the thing rolling pretty damn good. Plus, let’s not forget how well these motors respond to simple bolt ons, tunes, and most importantly alittle boost :)

[@jamesa6272]

97 Explorer 3:73 / 4:10 gearing gets rid of that slow feeling

[@ethanpintobean]

Whats the alignment

[@Mustangkid1993]

0:37 you have two taillights out ;)

[@nedaCFilms]

It just wears-out the shocks and struts faster...

[@ownTer]

What? No before and after Bamma dyno run?

[@rockbandfreke94]

anybody know what type of exhaust that is?

[@3050Corey]

Do the SR performance springs in this video cause the car to bottom out on everything? I am looking to raise my since it's a DD that's been dropped 2 inches.

[@americanmuscle]

+corey palmer Great question! Since the SR Springs are only a 1-1.5" drop you shouldn't have to worry about bottoming out at all! That being said, that also does depend on your bump stops and what kind of roads you are driving on! - Will

[@MrProhalogamer]

I have a 2004 40th anniversery mustang, its sonic Blue i believe its called, anyways its Only a 3.9L, i love it but basically i want it to breath fire lmao but seriously what should i do to make it Own my streets?!? Pls reply or pm me!!!!

[@AceNizzle]

nitrous man

[@SpudEater]

sell it and buy a gt

[@thecarguru6453]

A single turbo setup would really wake that car up.

[@rcmelton0615]

Coyote swap. The 2v 4.6 v8 is slow enough as is. I can't imagine how slow the v6 models are. Not trying to sound like a douche or anything.

[@AceNizzle]

they really arent THAT slow. I guess in comparison to what? I'll rip a 07-10'charger rt in the quarter mile all day but I dont see anyone EVER calling those slow or anything close to pathetic so I really dont get where you guys are coming from with that. Check my vids watch a slow stock 4.6 walk an srt8 challenger up to 85 (at which point he drags me from then on lol)

[@PayDroification]

Haha, I appreciate the respect, sir.

[@ryandelaney4874]

My gt is lowered 2 inches

[@mmesdaq]

it was a rhetorical statement lol

[@ownTer]

Care enough to hit the spam button.

[@ownTer]

Watch more of their vids...youll get the joke.

[@ballinboii1814]

Ik your getting paid for this but no need for the cringy commentary

[@nedaCFilms]

Made in China?

[@regyto12041988]

Zzzzzzzzzzzz zzz

[@Bers3rk_tv]

Stop goofing off with these older stangs show some more '11-13 stangs. And once again where the heck is Project Black out? If you guys stopped working in it. Then please take all the mods off and send them to me. I to own a 2012 GT 5.0 And it needs work ^_^ THANK YOU

[@mmesdaq]

first? who cares tho lol

[@excelerater]

junk springs