Top 5 Truck Parts For Your 2009-2018 RAM 1500 | Top Truck Accessories - The Haul

[@AmericanTrucksRam]

Subscribe for Weekly RAM Truck Videos: bit.ly/2G7fgWv Check Out Parts For Your RAM Right Here: www.americantrucks.com/the-haul-ram-july2019.html Parts List: Barricade Pioneer Aluminum Running Boards (09-18 RAM 1500 Crew Cab) - amtrucks.at/2LdLXag Borla Stinger S-Type Dual Exhaust System w/ Black Tips - Rear Exit (09-18 5.7L RAM 1500) - amtrucks.at/2WjGX53 Supreme Suspensions 2 in. Front / 1.5 in. Rear Pro Billet Lift Kit (09-18 4WD RAM 1500 w/o Air Ride) - amtrucks.at/2LeL3dI Rough Country Hard Tri-Fold Tonneau Bed Cover - amtrucks.at/32imTnx Nitto Ridge Grapplers 33x12.5R20LT - amtrucks.at/2JCJ1R3 XD Machete Satin Black 5-Lug Wheel - 20x9 -amtrucks.at/30rPEwm In this video, Joe shows you the first 5 mods you need on your RAM 1500.

[@evanmccombs8165]

What is the offset of the wheels on that truck?

[@itscorky]

What, no cold air intake? Installed one and love it. Throaty sound and better throttle response. I think I picked up a few horse power. Forget borla. Muffler delete, straight pipe to a "y" pipe. Sounds amazing! Loud, but amazing!

[@BloodofEli]

Get that backwoods clapped out exhaust outta here

[@rodcarew1353]

@@BloodofElitripping bro sounds way better

[@robfn]

Deep throaty sounds are the best.

[@jshapiro34]

Mods for a ram Leveled Wheels tires 33 12.5 20 22s or 35 11.5 20s on 10 wide wheels Carven exhaust tips with any louder muffler Kn filter or cold air Window tint Led backup lights led interior lights Throttle sensor like pedal commander or something Nerf bars or bedlined stock bars from Mopar Shorty or bullet antenna and debadge it. And tailgate strut All this can be done under 5k with premium options

[@monogamousbonobo3923]

Great tips! I've done most of those mods you've mentioned except leveling as I have OEM air suspension, which BTW is frickin awesome!

[@jshapiro34]

@@monogamousbonobo3923 air is a nice ride I had to do timbren spring savers or something these trucks squat so much under load

[@marcmclellan5124]

Sounds awesome man, but what does the pedal commander do though?

[@jshapiro34]

@@marcmclellan5124 fixes throttle sensor for cheaper than tuner....pulsar and others you will notice how much ur sensor lags before you accelerate.

[@timothymeyer7466]

I have a 2009 Dodge Ram 1500... I did a 2.5” leveling kit, I run 35/12.50/R20 tires on 20x10 moto metals with an -18 offset, Magnaflow Exhaust, Diablo Tuned, and smokey LED headlight and taillights... and all under $4000

[@cjr4497]

I put those steps on my truck for the exact reason in the video. They tuck nice and tight to the truck.

[@kooycat1789]

Pussy

[@deepseawrath]

Kooy Cat lol ...warrior

[@flyernatic]

2018 BBCP 1. Debadged (took big RAM letters off tailgate. Holes filled and repainted). 2. Non rivet body painted fender flares 3. Bilstein 5100s level 4. Rockstar II 20X9 (all black) wrapped in 295 Nitto Ridge Grapplers 5. Extang trifold tonneau. 6. Tinted everything (even marker lights on mirrors and 3rd brake light) except windshield. 7. Carven Competitor series muffler with 5 inch Carven black exhaust tips. (Almost sounds as nasty as my HC). 8. DZ Tailgate Assist piston. 9. Rhino Liner 10. Front end wrapped in Expel clear. 11. S&B CAI waiting to go in. 12. Upgraded all speakers to Kicker replacements. Plus 10" powered sub under drver side rear seat. Won't blow the windows out but miles better than the 6 speaker stock set up. 13. Unlucky 13 may be a SC and tune when warranty runs out. Lol.

[@Timd_Da_Barber]

Can I see a picture?

[@jorge5724]

Flowmaster Outlaw is the best for 5.7L dodge ram

[@phantom5185]

Got it, plus H&N Air Intake from Amazon. Cheap upgrade K&N $461.00 Exhaust $1,031.00 Canadian. Great gas mileage, deadly sound best is my buddy that lives across from me, waking him up at 5:30a.m. LoL.

[@lysias55]

nah, Flowmaster is made in china now. go with an american company like Carven. they hand weld every kit and muffler.

[@frostxinfinity747]

Nah, a muffler delete is the best, hands down.

[@lysias55]

@@frostxinfinity747 if you’re broke just say that

[@frostxinfinity747]

@@lysias55that couldn't be further from the truth. Far from broke with my Laramie Limited, bud. The Hemi sounds amazing by itself, there is no reason to cap it. Muffler delete and swap out the headers.

[@Cheeky-Trivia]

Apparently, the person who owned my truck before me, saw this video, it had all of these things already when I got it :D

[@KI080199]

Screw a $1100 exhaust 😂 delete it for 100$ and it sounds 10x better than that Borla

[@isaactaylor1833]

You broke ass people. Deleting mufflers instead of getting a real exhaust system. Fucking losers

[@jakethepackmule8611]

not all states let you legally.

[@colinbaugh1913]

Facts sounds 100x better

[@blackraven8841]

@@isaactaylor1833 bet my $350 Carvan on my Ram makes yo $1200 Borla sound like cherry bomb 🤣

[@EatSomeDussi]

If you’re broke just say it, 😂 I went with a muffler delete first it made it sound like a Honda going slow making a lot of noise to an exhaust system being loud only at high rpm’s

[@nedaddy1]

My first two were a hydraulic piston for the tailgate and a trifold hard tonneau cover.

[@AmericanTrucksRam]

Hard to beat both of those options! Thanks for watching, Shawn! -Zach

[@jwhmerica504]

My first mod would be getting rid of that pinstripe.

[@ActingLikeABoss]

Jwh Merica hey dont hate, I like my pinstripe

[@DJBrearley771]

LoL.... I was watching the video thinking, "Hey I kinda like that pinstripe"

[@loriracicot6069]

I own a 2009 1500 ram . I personnaly love the rack front to back because I tow a 8000lbs travel trailer and i haul gravel, wood , etc in the back. When I'm fully loaded the truck sits level. Perfect. I personally know a friend who has the same truck and used a level kit. however the back end squats when he hauls things. I prefer function over looks. My 2 cents worth. Take care

[@AmericanTrucksRam]

Whether or not you plan on hauling often is definitely nothing you should take into account if you're looking into leveling your truck! -Zach

[@lysias55]

look into sumo springs if you tow alot. they'll help with the sag and eliminate alot of the sway

[@Wally-pu2hh]

I have an 09 Laramie and the engine this year is the most powerful Hemi made

[@RandomPerson-sb5mw]

Weather tech floor mats should be number 1

[@buffalobmf]

First thing you should do is the exhaust then do fox/halo boss coilovers to level it, they also come with packages. Forget spacers they suck then do rear shocks. Then go up to 33s or 34s i personally do 34s then might as well add wheels with the tires

[@muko2002]

1 ARH long tubes cat less 1 3/4 2 CAI/thermostat/ exhaust 3 Pro Charger 4 Jay greene Camshaft 5 Jay Greene engine/transmission Tune You won’t regret it .

[@seshions]

Hows the sound on that??

[@muko2002]

Ganado haven’t been able to Intall my headers but they do sound nice and mean !!

[@seshions]

@@muko2002 do you have an ig? Trynna see what it sounds like bro if you dont mind

[@muko2002]

Ganado i don’t bro i deactivate long time . As of now I just have an old carven exhaust the very first one with no resonators on it .

[@marcmclellan5124]

Sounds mean man! But why did you get a thermostat?

[@eric8285]

The tips on the borla stinger are too small and hang too low

[@jshapiro34]

Carven makes a good loud set up with 5 inch tips all bolt up like 600 shipped to ur door or tips alone 200$

[@eric8285]

@@jshapiro34 I just got the carven competitor exhaust with tips, can't wait to install it

[@jshapiro34]

@@eric8285 super easy man watch some kustomblack videos his ram is jacked with suspension light Mopar and racing mods.

[@eric8285]

@@jshapiro34 already follow him, lol

[@jshapiro34]

@@eric8285 then you good to roll man

[@Brian-um9zz]

My Flowmaster FlowFX with dual black tips, 2.5" level kit, 20" XD Wheels w/275/65 BFG AT, JBA shorty headers, AFE CAI, and Pedal Commander Ram makes me happy. Althought I do want to get some side boards..

[@hemilover9574]

Hey bro you don't need the peddlecommander. Our trucks come with 3 different tunes from the factory. 1 eco mode 2 v8 mode 3 v8 tow haul mode (my favorite)

[@lysias55]

why did you go with an exhaust made in china?

[@uwetetzlaff8967]

Muffler delete works great for budget minded people! Thanks. Keep bringing it!

[@AmericanTrucksRam]

Thanks for watching! -Zach

[@ИванГригорьев-м8я]

Красота хочу такую же👍👍👍👍👍

[@maxforrest676]

I have the Carven R series on mine. I love it.

[@1lakerz1]

With the leveling kit. Do you need anything else? New A-arms? Or is it put and ride type thing.

[@AmericanTrucksRam]

The spacers in this kit need no other extra components like control arms, definitely just put on and ride! -Zach

[@Faceless_XIV]

Yeah, throw spacers in it. That way mod number 2 will be replacing your busted UCA's. Way better to go with a Bilstein leveling kit.

[@javadose317]

Brandon McGill we see you on here always spittting all your great knowledge we all appreciate it so much!

[@jasonmorehouse3756]

spacers arent the cause of busted uca, it's the lift height. up to 2" is fine , 2.5 or more is too much. bilsteins maxed at 2.25" is about the max you can go safely

[@Brian-um9zz]

@@jasonmorehouse3756 Is this UCA the reason of my little shimmy at 20-35 mph? I got it after the 2.5" level was installed.

[@maxforrest676]

Bolstering doesn't have a leveling kit for 2wd. Need to do a readylift spacer. I did it on mine. No busted UCA. 1.5 front 1 inch rear with new fox shocks all the way around. The rear shocks aren't necessary though.

[@huntertrapperdipper]

Oh man , no after market chrome rims for a silver truck, which I stayed with the factory 5 spoke chrome and I think it looks good

[@jasonmorehouse3756]

zero chrome is best

[@johnsharba9451]

Shut it off as soon as I seen the leveling kit without upper control arms. That's a great way to put excess stress on your ball joints and tuck a wheel and tire under your truck.

[@dennisjones1080]

I have a 2011 dodge ram 1500. Would this leveling kit work for it? And what do you think about adding the bolt covers above the wheel trim

[@Youtube7Account7]

I got the supreme suspensions 3 inch in the front and threw 305, 70, r17s Cooper AT3 XLTs with 17x9 Pro Comp Raven wheels. No rubbing or trimming looks goood

[@AmericanTrucksRam]

Sounds nice!! Thanks for the feedback! -Zach

[@mariap.7907]

can i still put the lift on if I tow a lot? Also same question for the tires that you suggest? can I tow better with those on? What modifications do you suggest for a person who tows a lot? I always wondered that cause I do a lot of boat hauling and car hauling

[@xxbioklismxx1850]

My rims are those pretty much but they say atx on the hub. I was trying to find out what they were but could only find other similar ones.

[@billknight5578]

I love my Super 10 muffler, I think the Borla Attack might be the same?

[@lincoln6981]

For you guys that have installed a 2” front / 1.5” rear kit , what are the measurements of the height from floor to middle of fenders ? I bought a ram a few months ago that looks to have been drop leveled( shorter springs in the back ) and I was thinking of putting on 35s but will rub with stock height. So I’m trying to see what height I should be aiming for

[@rickylee2477]

2 inch level lift and fox shocks will fit 295/65 r 20 with minimum rubbing at full tilt

[@batphoneuser1407]

Running boards for a quad cab?

[@Nmartin0021]

Exhaust tip seems like it’s sagging even further on the passenger side than the driver side, which already looks too low.. Is that adjustable? I would hope so for that kind of cash.

[@lysias55]

not adjustable on that kit. go with a Carven Exhaust kit for that and 5 inch chrome or black ceracoated tips

[@impala6524]

Is there a bracket to allow you to install a spare aftermarket wheel and tire(35) underneath

[@TheXSgtDaveX]

Definitely should have had Bilsteins for the level. I'm ashamed you guys didn't have a tune(r) listed as a must to disable MDS. The number one killer of any modern hemi.

[@911Fuser]

What's MDS?

[@TheXSgtDaveX]

@@911Fuser Started in 06 for 1/2 ton rams. Its a cylinder deactivation that is supposed to save fuel. It doesn't, and it eats the lifters and cam away over time due to the nature of it. Chevy has the same thing just call AFM active fuel management. There is no engine in existence that runs this tech reliably.

[@Dennis-sq2nm]

@@911Fuser multi displacement system

[@wr1039]

What’s the total height on this setup? Would it fit in a 6’9” garage?

[@jaeb.2842]

Love this channel! Thank you for these videos!!!

[@RandomPerson-sb5mw]

That exhaust is quiet.

[@araynortassadore3056]

Struggled with that tailgate joe...do you even tailgate? Let's see some HD Hemi upgrades

[@johnmasarik5676]

For the lift what do u need to replace in the front End? I did a rough country leveling kit in my dodge Dakota couple years back but my boots for my axles were on a slant cuz the lift. How does it work? Cuz I wanna lift my ram but don’t want any problems

[@waynethompson334]

How about some modes for the 2018 Dodge Ram 3500 6.7 diesel like air bags and replacement rear bumpers

[@DMalltheway]

I love the looks and all that but I don’t want to alternate anything big because it will cost me more in fuel 😮

[@ruffu3]

What size tires on 20x9 +18 offset. With 2" level kit rough country? Thanks

[@Grindman3000]

What about a 2020 Classic level kit?

[@trentondavis4752]

gotta love that deep throaty sound😂😂😂😂😂

[@noyasorrow7660]

That’s close to perfect right there 🧼

[@floridapatriotsfan9242]

Are these lift kits compatible with my 2wd Ram.?

[@TeamWinnieRacing]

Just spend the 600 on a 4" spindle lift. You'll save money in the long run spacers will destroy your front end components quickly.

[@davidwolleben2100]

With the trifold tailgate cover can I take the whole thing off whenever I want easily like if I want to put a dirtbike in the back

[@jasonmorehouse3756]

yes , 2 screw knobs at the front, loosen and lif off all folded up. the small rails stay fastened to your truck. but for reference , it folds up to a vertical position at front, with built in prop rods. i can still haul my 700 kodiak 4 wheeler with my cover folded up, your bike would be easier

[@galaxygs96]

That exust look too small. The stuck ones are way more aggressive

[@darrenfarr9214]

What size of tires of this and would be lift size and for what truck year because I have a 2011 dodge hemi ram 4x4 truck

[@danielweeks2559]

This is an awesome video man thanks I just got my 2013 Dodge Ram 1500 4x4

[@AmericanTrucksRam]

Congrats on the new truck, Daniel! Thanks for watching! -Zach

[@jasonmorehouse3756]

you got a ram, not a dodge

[@wisconsinrebelhomes7587]

The Internet troll is mad that someone said Dodge

[@andy461061]

is there any 3in lift front, 2in lift rear for a 2wd?

[@pat_doza1262]

So my first truck was an 06 1500 and it had over 200,000 miles on it. Never had any problems but i only hear bad opinions on the 5.7 hemi. Why do some ppl not like them?

[@elvism684]

Tick Tick Tick

[@Manifesto2091]

What size terra grappler was that ?

[@elijah6491]

Don't forget the 2013-2016 lifted issue. Had to do mine and it was not cheap

[@CPO-kn5uo]

Elijah ! ???

[@travismcgraw3195]

Why size are the tires

[@mamaexcel4212]

How much does it cost to have this

[@frankmmiii]

I had to stop about a minute and a half into the video to express at least my feelings on the way the truck sits. I actually like the way it sits stock with the rake and front slightly lower than the front. It sort of gives it that old school "hot rod" look when you had bigger tires in the back and smaller up front. It also will sit level when loaded correctly or towing. However, I want to upgrade my 2015 Ram to 22 x 12 inch wheels with 35" tires and I'm hearing that by installing a leveling kit(2" front), you will not only keep the factory ride and suspension without altering the geometry but running larger wheels and tires is possible without modification to the wheel well, frame or anything else.

[@cklstation11]

I find the best exhaust for v8s are finding garage shops that restore old trucks and muscle cars 1960 1970 and use those mufflere they put on those vehicles. Cheaper and they sound better. I was able to get them to install it on my Chrysler 300c and dodge 1500 05 for 400$ each from car converter to rear bumper.

[@lysias55]

if it was that cheap then they didn't use 304 stainless

[@vr4787]

Are these mods compatible with 2020 Ram 1500 Classic?

[@AmericanTrucksRam]

Yes they are! As long as your RAM is the Classic model, pretty much the same body style as the 09-18, they'll fit just fine! Please feel free to give our customer service team a call if you have any questions on fitment. -Zach

[@andrewsartor3529]

Hey what size was the tire you guys put on? Great look

[@codykoehn5303]

With a leveling kit u could have put 35x12.50r20 on it. And done a muffler delete. Or both muffler and resonators delete. Thats what kind of exhaust I have on my truck.

[@8thgstriker412]

I have a 2013 ram 1500 express Would that level kit work for my truck Everything as far as I know is stock but compared to other stock trucks on the road I definitely sit lower to the ground I think that’s the main diff between the express and tradesman right? the lower to the ground more muscle look? I really don’t know anything technical about trucks or any parts lol

[@AmericanTrucksRam]

As far as I'm concerned, the Express was the middle package after the Tradesman but before the Big Horn. That leveling kit should work just fine! -Zach

[@nathancole9823]

If you want a really good sound get a black widow race venom 250 it sounds amazing.

[@lincoln6981]

Man I kinda want to add 35s on mine. But don’t know how much I need lift the truck since it had a drop level when I bought it. Along with the lift to achieve 35s , I love some deployable running boards since I like the look without steps but they definitely come in handy. I should’ve know buying a truck would turn even more expensive when you start buying extra stuff 🥴

[@drewnunez5483]

I installed a 4” RC lift kit. Smacked some 35x12.50 on the stock ram wheels. Absolutely no rub sir!

[@PinoyWonder]

I got a 2012 ram St..my question is..about the leveling kit..is that ok if I use the stock shock..front and rear..thanks

[@AmericanTrucksRam]

This leveling kit will work just fine with your stock shocks front and rear! -Zach

[@randomstuff7277]

That's the idea of a level kit. Basically add height without changing any suspension or doing an awful body lift.

[@BeeBombard]

I have a 2007 dodge big horn. Will any of these work on my truck?

[@MyDailyPerspective]

Don't do it....

[@AmericanTrucksRam]

This specific video was made for 2009-2019 model year RAM trucks. So while the specific parts shown won't fit, you can definitely use it for inspiration on your own truck! Check out our website! -Zach

[@douglasriseley1362]

Hi. Douglas here. I have a Dodge Ram 1500 4x4 1998. I love this ram. Sadly pooped the transmission My question l am having no luck getting a exchange trans. Can you point to someone who can. I live in Australia. Tasmania

[@JohnJohnson-vu7xj]

On my 13 ram I just need a brushgaurd and steel bumper.

[@pacmanjones5625]

also forgot, at bare minimum, to tint the front windows to match the factory tint of the back windows and rear windshield

[@HarrellB_US]

Also, if you’re gonna put a leveling kit on it, you better go ahead and get some different shocks because after a while, you’re gonna have a ugly squeak in the front.

[@aggy6194]

Is that Borla CARB legal though?

[@AmericanTrucksRam]

Since it does not interfere with or remove the catalytic converter, this system should have no issue passing smog tests! -Zach

[@CrawlTalkRun]

my only beef is that those rims are literally everywhere so they wouldn't separate you from the rest of the crowd.

[@keeblereld42]

but what about the spacers lol you will be rubbing on your sway arm...

[@popwall4297]

David Guerrero when you put those spacers in that's the least of your problems don't forget the upper A-Arms ball joints that pop out out of alignment front drive shaft shorter than it should be lots of things to look at

[@keeblereld42]

@@popwall4297 yea I was worried about all that so I would check periodically but it's been around 6 months and it's all still fine

[@jasonmorehouse3756]

@@popwall4297 that is only true on larger than 2" spacers

[@davidmendez369]

Hey if you ever want to do any motor upgrades to my 2019 ram 1500 5.7 night edition let me know.

[@webbspawn]

Had a question! I got 09 ram Trx 1500 what leveling kit would you suggest for that? Looking for maybe 3 1/2 front 2 1/2 rear!? Is apreciate your info! Thank you!

[@AmericanTrucksRam]

Really depends on what you're trying to do! If all you're looking for is a more aggressive stance and maybe a size bigger tire, a 2 in. front leveling kit will be just fine. If you're looking at running 33s or something a little larger, you will want to lift the front and rear like a kit you mentioned there. Hope this helps! -Zach

[@webbspawn]

AmericanTrucks Ram thank you for the reply!!

[@stephenmcgraw3610]

They don’t sell the rim size anymore

[@stephenmcgraw3610]

20 by 9

[@crimebydesign5797]

Get rid of the resonator in the exhaust and do a tune will make that truck scream

[@johnjlanejr]

Add a spare camshaft and set of lifters to the list...

[@superior3384]

Cool video. Thanks

[@AmericanTrucksRam]

Thank YOU for watching! -Zach

[@lightningblanchard952]

Looks like I’ll have to find a different guide because I have a 2008 lol

[@raulapaez3128]

Hope to get my ram looking like this soon 🙏

[@AmericanTrucksRam]

Check out our site, Rual! We can help with that! -Zach

[@SpliffSized]

My first upgrade were lifters and headers because my bolts snapped

[@brianparker181]

How does level kits effect towing and hauling

[@sojourn1544]

Leveling is more for off road.....if you raise your front end...and then want to tow something..your headlights will be shinning really high...and the front leveling will put extra stress on your upper a arm and ball joint.....

[@SnackAttack77]

Muffler delete only way to go with the 5.7 Ram

[@MissionaryForMexico]

Notice he never tells you prices for all these upgrades!

[@thearchitect817]

The side steps should’ve been designed better to curl up to fill in the dead space of the rocker area instead of just running straight out like they do . That would regain any lift lost from the install of these. The rims are anemic as well. There is way too much open space above the tires . I’d want to fill it in by using a larger Rim and wider walled tire and /or some fender protectors flared in to help fill the space. My Ram has the step side factory and it pops in and out automatically when I approach. But overall this Ram looks good but don’t they all ?

[@BMLKMB]

Cat back exhaust. Can Tune. Headlights/twilights. Grille. Level

[@AmericanTrucksRam]

Not a bad list at all! Thanks for watching! -Zach

[@changito2080]

They installed the exhaust wrong

[@DeeDaP4]

So what if you got an 08😭

[@sdott2725]

You buy 09🤣

[@BM-sl1zs]

My first mod would be getting rid of my last name if I was him

[@tamurphy11]

Or change his middle name to long

[@Weak_juan]

Dont mean to sound sore but the owner should've spend some money on annual rustproofing.

[@AmericanTrucksRam]

For a Pennsylvania truck that is used year round, small amounts of surface rust like this is really no issue. The only way you can keep a 100% clean under-body in the Northeast or Midwest is to undercoat your truck yearly and rarely drive it. -Zach

[@princeofdeath7696]

@@AmericanTrucksRam Jack it up, cover anything important and hit that bad boy with some rhino liner on the underbody.

[@jasonmorehouse3756]

@@princeofdeath7696 that will trap moisture and speed up corrosion

[@MrBakakeng]

Spacers?

[@futuristicwealthh]

what year is that

[@GL2330]

there's really no point replacing so much of the exhaust on a stock, newer ram 5.7, just throw a flowmaster super-10 muffler on the stock pipes for loud, great muscle car sound. the stock cat-back pipes are high quality and plenty wide, so replacing an entire cat-back is an expensive swap for almost no hp gains over a highflow muffler. i don't think people realize if they go too wide on the pipes on a fairly stock engine they will lose a bunch of low-end torque/hp, and they'll never drive the truck at the higher-end rpms where the wider pipes "may" have a slight benifit. too little back-pressure will result in a flat low-end feel.

[@BloodofEli]

Exactly, there is a lot more to it! I want to do lifters, cam and full catless exhaust but that would require a lot of money and a proper tune plus upgrading the cooling system as well. I have a 8 inch lift 35s , KN intake and a cat back atm.. 10 Big Horn TRx 4x4

[@419lunchbox]

I got a 99 Durango it was so quiet you could hear a church mouse peeing but I want to go shake it it was so heavy it was just not move so I cut it off about 18 in after the cat and that was the best thing I could ever done for that 4.7 that's on so good Mopar rocks

[@sandrap556]

You know women like this truck to I am a woman and I just bought this truck 2017 maybe you can show something that a woman might like about that truck I don’t wanna make it have noise but I would like to know how to make sure that it doesn’t have a Lotta noise but thank you for showing I like to know all kinds of things that I could do with the truck

[@youthoutdoorsandvlogs8776]

Great idea make your brand new truck ride like a piece and junk with a cheap jockey lift kit

[@connororanchuk7242]

They actually ride the same tou cannot tell the difference .. it's just a metal puck above the shocks ..

[@BigSteve34]

And there is a reason trucks are higher in the back. For people that actually use them

[@denniswinter7714]

I guess you don't live in snow country. First thing your going to do is knock your ass silly when you use those running boards, that's if you can get the door open with the ice and snow build up. Tube type is the only way to go.

[@aeoo371]

The last Borla exhaust system that I had was junk in less than two years! Never again.

[@lysias55]

go with Carven nextr time. you won't regret it

[@d_manoil1647]

Remember to budget 6k for cam and lifters when they fail.

[@TwoLeggedTriceratops]

No Jinglejackers x2000 on this list??!