Amp Research PowerStep Install Silverado | Best Upgrade Ever!

[@edwinmedina353]

Very nice job, you said take out the fuse before you install it you're the first person I heard say that well done sir.

[@zachattackcustoms]

Thanks, I try to give as much detailed instructions as I feel are needed. Thanks for Watching!

[@scottulrich4200]

I have a 2020 Chevy Silverado Trail Boss 6.2. Just installed the steps myself in 5 hours. The part that took the longest was running the wires and installing the lights. 😂😂😂 Very easy and straightforward. Love the steps! Bought the Extreme (dual motor). Waited til they went on sale and pulled the trigger! Great video!

[@zachattackcustoms]

Thanks, yea I definitely love them.

[@Thekrpntr]

Had them installed on my new Colorado when I saw my vertically challenged girlfriend crawl up into the truck. She loves them because now she can step up and in with no problems.

[@zachattackcustoms]

🤣🤣🤣

[@bobandrick8546]

This is one of the best instructional videos I have ever seen.

[@zachattackcustoms]

I truly appreciate it! I try to be as detailed as I can. I strive to help people install things on their own instead of paying an arm and a leg to a shop.

[@fussebd1952]

Good job but I was wondering what all the wires crossing over on the passanger side. thanks

[@pattibeeating]

Zach, this is a great video and helped me a TON for my AMP steps install. Much appreciated and all your videos are great, looking forward to installing the underglow lights soon hopefully!

[@zachattackcustoms]

Thanks for watching and for the support! Glad to help.

[@Dmonerik]

I have Blue and White wireS along with the Purple wires coming out of the OBD Plug. Installing in a 2024 GMC 1500 AT4X. I didn't see you hook them up to the Green/Grey wire or Green/Yellow wire in the Driver Kick Panel. Are those un-necessary? Directions are a bit confusing.. Thanks for the great content!!

[@zachattackcustoms]

Unfortunately the wiring is different on the newer trucks. The only wiring for my year requires the OBD2 port connection.

[@Dmonerik]

@@zachattackcustoms Thanks for the update and keep up the good work!

[@bruceb1958]

When I saw that you used the torque wrench, I was pleasantly surprised.

[@cesarromero4908]

Please, could you provide the detailed OBD II connection? It broke and I need to make another one, but I don't know the pin configuration. I know I only have to connect two cables, but I don't know which OBD II pins they should be on.

[@JeremiahReed-ji3gu]

What size tires and lift do u have a your truck

[@zachattackcustoms]

Readylift SST 2.0 which makes for a total 4inch lift and 285/75/18 nitto recon grapplers.

[@jdptootall]

Very nice job, great video. ? 4 U. I have a 2024 Chevy 3500; My OBD2 connector has two wires coming out of it like yours; one wire is all purple and the other one is purple with black stripe and I have those connected. The steps do not currently deploy when doors open. The steps apparently need two more wires out of OBD2 blue and white wires to connect under dash at BCM to trigger the steps. Thoughts? Thanks!

[@zachattackcustoms]

It seems like they have changed a lot of the wiring on the newer trucks. I would reach out to realtruck support to see if they have a fix for this.

[@antoniocarreon7177]

Did you resolve this? About to install on mine and I was wondering why this was different in the instructions? Did you get them to work?

[@jdptootall]

I did get it resolved; there was a new OBD2 for the 2024 model year. I called RealTruck gave them my model & year and he pointed me to the correct replacement. All works perfectly.

[@tylertucker4478]

These dont have any door magnets to install like the rough country ones?

[@zachattackcustoms]

Magnets? What are the magnets for in the rough country steps?

[@tylertucker4478]

@zachattackcustoms from other videos I've watched the magnets line up with a door sensor and that's what drops the step when you open the door. If the amp plug into the obd2 can I still use my scanner that plugs into my obd2 24/7 or will I have to pull out the amp one to use my scanner

[@zachattackcustoms]

@@tylertucker4478 Oh, yea the Amp Steps don't require door magnets. It's just plug and play. What I do when I need to use my scanner is just unplug the steps and then plug them back in when I am done with the scanner. Amp Research does sell a splitter if you don't want to worry about unplugging and plugging back in.

[@goatsmakesoapco.9113]

Do you know if these steps hang down further than your typical standard stationary steps attached to the truck? Can you measure how far the step is from the bottom of your body?

[@zachattackcustoms]

I would say they hang lower, they drop down about 6 inches.

[@engineman02]

You have to leave the harness connected to the OBD2 port for these to work?

[@zachattackcustoms]

Yes but they do offer a splitter

[@mamba2462]

​@@zachattackcustomsHow did you get your under glow to turn on when opening your door?

[@zachattackcustoms]

@@mamba2462 Amp Research Power Step LED Lights UPGRADE!!! kzbin.info/www/bejne/nqi9e36wpa-Yars

[@ifithaswheels7307]

Hello - Could you verify what socket you used for the motor torque? The instructions say 4mm hex but that does not fit. A T25 is close, wondering if you used something different? Thanks

[@zachattackcustoms]

Yes, I am glad you brought that up. I forgot to mention that in the video. I used a T25. I believe a T27 fits a little better though. I also meant to reach out to them to let them know to change the directions. Thank you for reminding me.

[@r.g.martinez8697]

I also have a trail boss as well and wanted to know if you needed to get the step XL since the trail boss comes with a 2” lift

[@zachattackcustoms]

No these steps come down pretty far, I have a 4in lift and it’s perfect.

[@mikq8606]

What tire size buddy do you have looking clean

[@zachattackcustoms]

285/75/18

[@dannyewing1767]

You should put dialectic on your motor plugs

[@FranciscoGarcia-zd3pw]

Can I install this on a single cab short bed 2000 silverado? Thanks!!! 🙏🏻

[@zachattackcustoms]

Unfortunately, it looks like they don't make them for that cab size for that year.

[@BuenasVibras909]

Damn I really wanted these steps but I have my range afm/dfm disabler on my ob2 port.

[@zachattackcustoms]

They sell a splitter.

[@fixitdanner]

Looks good, great video.

[@zachattackcustoms]

Thanks. These steps are pretty awesome. Highly Recommend!

[@mhernandez248]

We have a 2023 Chevrolet Silverado and we had a shop install our steps and the backdoors won't trigger the backsteps to open. They've trouble shooted them with the company and no luck. Any idea what may be our issue?

[@zachattackcustoms]

I have been meaning to look into this issue. I will try to compare the wiring on the 2023’s OBD2 port to make sure the pins should be the same for the triggers. Also, I would check in your radio. There may be different door settings on the upgraded infotainment center.

[@zachattackcustoms]

When you open the back doors, do you get an indicator on the dash telling that the back door is open?

[@zachattackcustoms]

Are your rear windows working?

[@zachattackcustoms]

Also, did you buy the boards or did the shop? The part number for the 2023 Chevy crew cab is AMP-76255-01A. Might want to make sure it’s the right part number.

[@RC-iv4dx]

Looks Great!

[@zachattackcustoms]

Thank you, I love them!

[@dylanmiura2834]

What rims are those?

[@zachattackcustoms]

Factory

[@r3drvng3]

the technician who works on your truck and has to take the body off is gonna mad as hell, please do better with your wire routing😢

[@zachattackcustoms]

lol, I am the technician that works on my truck.

[@henryvaldez1733]

What's wrong with the wiring?

[@zachattackcustoms]

I have no idea. I did as neat of a job as I could.

[@bruceb1958]

Only a problem if they need to lift your body to clear the frame for major engine work.@@zachattackcustoms

[@fantaztikbeatz]

​@zachattackcustoms great job thanks I don't know what that guy is talking about 😂