HOW TO MAKE A 3D PRINTED F1 GT WHEEL

How to make a DIY F1 or GT style 3D printed sim racing steering wheel. Build that can be customized for your simulator by using LEDs, a LCD or different dash displays.
PARTS LIST
USB Joystick Encoder ebay.us/AdkVYz or BG bit.ly/387SYCE
Momentary buttons ebay.us/K1vTAE
Bolts for wheel
M6x25mm Cap socket ebay.us/NaQfM4
M3-M6 Nuts ebay.us/SciP1k
M5x 50mm Cap socket ebay.us/NaQfM4
M3x 35 Countersunk ebay.us/YaBl86
Carbon Vinyl ebay.us/ItSYEQ or BG bit.ly/2JhDwa8
This site contains affiliate links for which I may be compensated
Steering wheel 3D Files Amstudio Website - bit.ly/2B7pFji
Magnetic Shifters included
Magnetic Paddle Shifters Build video Step by Step - • MAKE THESE MAGNETIC PA...
Parts per Paddle Shifter
2x M3 Cap socket screws 10mm ebay.us/KembQw
5x M3 Cap socket screws 30mm ebay.us/KembQw
2x Neodymium magnets 8x5mm ebay.us/Djik1n
1x Micro lever switch ebay.us/XeDXOk
Wire bit.ly/3zSeUAs
This site contains affiliate links for which I may be compensated
TOOLS
• Flat and round File ebay.us/j4UKtw
• Sandpaper ebay.us/MoBTpw
• Scissors ebay.us/fKB3oZ
• Allen keys bit.ly/2MBv0DD
• Third Hand bit.ly/3SoZsmT
• Solder bit.ly/3oQsyhe
• Soldering Iron Cheap bit.ly/3cWeEYh
• Best Soldering Iron bit.ly/3cWeEYh
• Butane torch ebay.us/44ww4A
• Utility Knife ebay.us/qcTpDO
• 3D printer bit.ly/3zRHPVf
• Wire cutters bit.ly/3Bz8acd
• Wire strippers goo.gl/4PFXny
• Heat proof solder mat bit.ly/3SonQ7Q
• A3 cutting mat ebay.us/WEKZ7w
• Vinyl Squeegee ebay.us/XK2YpG
3D Printer bit.ly/3zRHPVf
3D Filament bit.ly/3zPNg7l
This site contains affiliate links for which I may be compensated
Thank you for watching, all questions are welcome.
Want a tutorial or project built, leave suggestions in the comments.
Share the video with a friend who would like this!
AMSTUDIO channel for other DIY projects.
/ @amstudioprojects
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

[@itchie]

this is the best sim diy channel on youtube ..serious

[@amstudioprojects]

Thanks!

[@bobross5778]

For sure, no competition.

[@micahtritscher951]

Not disagreeing, but how many other diy sim KZbinrs do u know 😂

[@pakowsky2656]

Yes but expensive

[@cloudstoragexd5101]

@@pakowsky2656 compared to buying from some company, the price is competitive, and cheaper most of the time. It's for people with time and want to have the ultimate customization for their rig

[@_andy_au_]

you never cease to amaze me with your creativity and ingenuity

[@timlaw4720]

Awesome work there am! A lot of effort and hard work put into this well done m8 keep em coming

[@Jaren2905]

Spectacular without words, good work. I hope more mods for this steering wheel that you have done, put some screen, rotary and stickers

[@MrAstor99]

Awesome work as always!

[@non7sens]

I like these kind of 3d projects. Great video!

[@seanohutton3185]

This is one talented bloke ay!. Looks like a ripper mate, well done!.

[@focke_wulf4133]

Try doing diy seat rumble please

[@playmaker5601]

You Sir, are awesome! Best content for DIY sim racing. Lapping the competition! I think I will cya on Patreon very soon :)

[@rtfelix2288]

Wow! Excellent stuff as usual. Definitely gonna have to give this one a try... now to get a 3D Printer!

[@LeandroCRZ]

Always the best!!

[@hertzmaddentv8304]

Amazing design!

[@WrLck]

Please more steering wheel videos!!!👌🏼

[@joseenmanuel1]

Please make a 2dof sim, this is the best DIY channel ever

[@BreikinFin]

Really nice work!

[@RUsOmaDDbrO]

today my ender 3 arrived after 1 month of delivery, cant wait to try this out 👌

[@amstudioprojects]

Nice!

[@duvet1977]

Top job sir.

[@srph6807]

very nice project, congrat ! you helped me a lot for my button plate project

[@kaspartiits908]

best diy sim channel

[@amstudioprojects]

Thank you!

[@byFCdesign]

I absolutely have to do mine!

[@JasonMatano]

Built this today with my little one. It is the perfect wheel for him since it's a little bit smaller in size than the Thrustmaster wheels I have.

[@TrevHowsonDemon82]

Hi I know it's been a while, but can you remember how long it took to print this in total? Places by me charge by the hour to print and trying to get a rough cost.

[@OliverPohl]

That looks great. Having a 3d printer seems to be standard by now.

[@privatepengu]

You are amazing!

[@charliebrownau]

Very cool

[@madatyoutoob]

Amazing!

[@amstudioprojects]

Thanks

[@yakfish36]

You are the best mate

[@amstudioprojects]

Thanks!

[@MarcoGenio]

Damn that’s good work keep it up boi 😁👍

[@amstudioprojects]

Thanks Marco

[@mkperformance5353]

Great video ! ;)

[@angelcc5819]

It is a very good work friend, it would be nice that in the future you will take a variant with 2 clutch paddles and the central screen, even so very good design I do not miss a video

[@chanaquid]

great video! subscribed !

[@amstudioprojects]

Thank you!

[@pirozcontractor6006]

Nice, now can we have some magnetic paddle mods for the G27/9 wheels? I'm sure you know how mushy and strange the paddles feel. Alternatively, could you do a guide to wiring the TM1836 displays (the one at 2:56) with Arduino nanos? I'd also like to see how you can connect buttons to the 8 button terminals at the bottom and get them working as well, so there is no need for 2 USB cables. Please, I know you've done a video on a TM1386, but that was a separate dash and I want to see how you could integrate it with the buttons so that the end result could look like this wheel and the TM1386 (In a way like the BMW Williams wheel of 2004 that Juan Pablo Montoya drove).

[@jamieburke3909]

nice vid man!

[@amstudioprojects]

Thanks!

[@joshblockley5628]

Nice I !

[@candle_eatist]

Nice, looks like the lower tier Formula #(number somthing i dont know) steering wheel in assetto corsa

[@ollemauleonwolter848]

Can you make a toutorial on how to get the horn on an aftermarket steering wheel working for the g29, like your OMP steering wheel :) and i think you're the best diy channel on yt, i love the videos

[@Xplouding]

Great!!

[@liampink8704]

can you please make a video about designing this and just things in general in fusion.

[@BDoh]

Looks awesome 👏🏼 Wish I could use it with a Fanatec CSL base

[@yakfish36]

You can but you need to sacrifice a current wheel to get the connectors and boards. Its a bit of effort but doable. Im also looking into tge blutooth connection set ups on the new dd and hoping to retro fit one to my 2.5 will post how it is done if i can get it working that way as it will be neater.

[@dongetti]

Great project! How much infill density do you recommend for the base?

[@akroutsamo]

Well done, but always with a Logitech Wheel base , how about DIY the hole thing 3d printed Keep up the good stuff

[@sheu_her]

*Tutorial for the complete wheel setup plzzz* That will be extremely dope

[@Alex_1652]

👍🏻 Nice

[@JoshKernica]

Did you run any simulation or force analysis to determine the support structure or thickness of material needed for stronger wheel bases?

[@bivandi3101]

Great video! You should do a Fusion360 tutorial of this!

[@LuigiHack]

Loveeeeeeeeeeeeeee this is so cool ❤️

[@amstudioprojects]

Thanks!

[@Raycinjaycin]

How much filament did this project use? Cool stuff bud. Really enjoy the channel

[@프레디khjfreddy]

YEAH!!! Another video! Please upload more frequently ;-) By the way what printer do you recommend for these projects? I think it should be pretty big....

[@amstudioprojects]

I used the Ender 3

[@aleksandrkoraykovski8446]

dear do an overview on connecting led warning flags.I'll be grateful to you.

[@edcastanha]

Hello, congratulations for the beautiful projects and the sharing initiative. Could you inform the time for completion of this impression?

[@chemseddinemokhtari9151]

Awesome waw

[@kitcut40]

Hello, can you make a tutrial for make a push pull shifter like in wrc. Thank you and good video / design

[@Spielmann161]

Awesome can you do this with a Driftwheel like the BMW?

[@ismelsierra469]

Wow, great video. Thanks for the hard work! I would like to ask what is the outside diameter of the wheel and if available how much it weight

[@AndreiDragonulBGS]

i wonder if its possible to get a display mounted in the wheel to show you the speed, the gear and the rpm? it would be cool

[@JoaquinScansiGarcia]

Could you make an f1 style clutch for the logitech g29? Its my dream.

[@Daniel-dm9xp]

I was thinking about doing something similar to this using a seperate logitech button cuircit board and then i can plug it into the actual wheel when i dont use the stock one so it looks cleaner, not sure if it will work though.

[@chemicalspore]

Sooooo this is sturdy for hard core racing?

[@DCtropical]

Can you make a tutorial for analog clutch paddles (behind the wheel) like f1 cars have? Thanks!

[@Pepeex22]

Good idea!

[@DCtropical]

@@Pepeex22 thank you!

[@alexsib444]

you could stack 2 magnetic shifters and cut off from the clutch one in order to make it smaller (that's what fanatec does at least).

[@chickenjonte_]

@@alexsib444 it wont be analog

[@alexsib444]

chickenjonte true I cannot argue

[@mosan6414]

Would this fit onto the fanatec clubsport or podium wheel hub

[@rjl95]

You know what would be great? A design for a single-axis F1 type magnetic shifter. So that you can up and downshift on both sides of the wheel!

[@ALLRNDCRICKETER]

Technically what is a WRC shifter paddle, yes I'd love to see him make one of them 👌

[@rjl95]

I think you mean the ones that don't have one central pivoting point? E.g. you could drive with 1 shifter paddle on one side. The F1 type have one shared axis in the center which they rotate around. So the left and right shifter meet in the middle basically.

[@ALLRNDCRICKETER]

@@rjl95 I get what you mean. I don't think it would be possible to 3d print a system something like what were saying, due to the face that there needs to be the wheel mounting point in the middle, plus on most F1 wheels they come above the wheel mounting, and are very thin. 3d printing something such as would no doubt break with wear and tear over time

[@pirozcontractor6006]

@@rjl95 i think Fanatec have already done that with the 650S wheel

[@rjl95]

Yes they did, but now we need a freely available 3d-printable model/project :D

[@MLeitao]

Hi, thanks for your videos, what is the size of the wheel?

[@alonsosaz8838]

hello a change for the shift cams to drive with a hand that is my case thanks

[@bobbadeeznuts]

could you make an upgrade to the thrustmaster t150 rim?

[@chiune.3881]

Do you also add a front cover for a digital screen as well? I want to buy this project but I'm not sure about this detail.

[@TheThumbsUpChannel]

This is epic, but how do you set it up on the pc

[@overundersteer5953]

With which program or app did you do the pieces of the wheel. For the printer, because this is absolutely amazing.

[@vrtmorvic2652]

Does the FFB remain unchanged with the adapter or is it slightly tamed?

[@ignacioherrero9374]

Best regards mate!!! great job yours congrats. I have logitech Momo racing rig and I dont know if spacers and quick release stuff will fit properly over the stering wheel mount. Let me know please , and if will be afirmative you´ll have new order soon.

[@NigelStegmeijer79]

Is it possible print anything to use it on a fanatec base without the universal hub?

[@joserosado7352]

Good and best video, can you bring the file in dxf format for make steering wheel on my cnc machine

[@domainexpansion6438]

Hi i have a question is it neccesary that we use nextion screen or do we have other screen choices? Thanks in advanced.

[@toose70]

Very cool. Does the wiring work for a G-29 PS4 version?

[@monstaxci7196]

id put the buttons closer to the edge and a Mobile Phone holder in the centre that would hold it either way the wheel was used.

[@stunttijoona7897]

Do you know if its possible to mount usb handbrake to fanatec table mount without any extra holes

[@MarcoForestieri]

hi, can i put a rotary switch with this USB encoder or buttons only? thanks...

[@olivierruiz9806]

Is there a usb port coming out of the steering wheel that you plug into your computer to make the buttons work?

[@simculture8576]

amstudio I would love to see you make a bluetooth version of this!

[@amstudioprojects]

Sounds good

[@vitek134]

Hi great video. Could i Ask is this diable on a ender 3 and is there aby difference to make IT compatible with thrustmaster

[@AsiBitton]

I am disabled using hand control for the gas/brake. Do you have steering wheel with shifters and gas/brake (clutches like)?

[@jamesavent3228]

Hey amstudio and comment section wondering if it is possible for some of the projects like the F1 wheel is able to upload the code from a PC and then use it on a console (Xbox one).

[@dqmnt883]

Is it possible to change the g29 quick release and put an thrustmaster adaptater for t300rs ?

[@accelized3599]

Nice! Is this solid enough for heavy duty usage with 100 FFB ?

[@mauroburroni9013]

hi , do you have a setup for pc ?? and a wiring diagram ??

[@ritemasterful]

Great video dude, i have a dead smartphone, is there a way to use the screen on my rig?

[@keeganwidmyer5822]

For anyone that has tried, will this work for PS4 on F1 and GranTurismo? Thanks. Also, what would the ten buttons be used for?

[@simonashley8914]

Is the usb encoder plug and play e.g plug into wheel and play xbox one. Or is it the case you can only use this on pc via software.

[@klemy1973]

how much does it cost? 3D printing, electronics, etc.

[@dariobauer1175]

Stop make me spent my goddamn money :D

[@pirozcontractor6006]

Also I've finally finished your sequential shifter build, anyone suggest how to mount it???

[@hersashimi]

Do you have to program the buttons for them to work?

[@mako4874]

hey amstudio- i have a question with the usb joystick boards- they say they have 12 buttons- can you make more- using the up , down , left, right? and if so- is it straightforward?

[@milesgti]

My budy has a thrust master tmx. Would this design mesh with that wheel?

[@Felsgiraffe]

Can i use the wheel on a 50mm or 70mm mount as well?

[@mikejones-nd6ni]

So after I'm done building this do i need to do any programing of the buttons or do they all just work?

[@Alex_1652]

Can you make a 3D printing tutorial please

[@karstthomson4723]

What were your printer settings? Im using the Ender 3 Pro but not sure on how much infill to use.

[@larskuh-_-]

is there no way to directly connect the wheel to the wheel base with quick release i have one from moditek?

[@ivanbukvic5341]

Could you please make a video on how to make like that drifting type steering wheel i need an idea for a wheel cus i am making totally diy steereng wheel and pedals.

[@motorsgamers]

Hello what is the best type of 3D printer for wheel ?

[@Simlife101]

Hi amstudio I'm considering making this rim. I use a 20nm mige motor direct drive wheel. Would you say it is strong enough for that or any advice to make it so. Any help would be greatly appreciated. Amazing work as always

[@ta05racer]

which Thrustmaster Quick Release Adapter is used for this wheel, im using a thrustmaster tsxw