Link to his video. kzbin.info/www/bejne/q4DScqiGl7Oqg68si=tzm0nW0hFsTILD9g
@howardb.7288 ай бұрын
Once again - simple trumps complexity - nice work mate!
@unclejim23308 ай бұрын
Thanks Howard. 👍
@hesa36568 ай бұрын
Thank You Sir! This was simple and practical! 👍🇺🇲
@unclejim23308 ай бұрын
Heck yeah. Do you have shotguns? 💨💨💨
@hesa36568 ай бұрын
@@unclejim2330 Yes Sir! I wish you had seen me so happy when my Mossberg 590 came in. I just double cased out on Winchester universal 12 ga 7 1/5 shot. Clearance back to 2019 price $21.50
@PatriotPaulUSA8 ай бұрын
Nice! 😊 Keep this up and I may have to get a shotgun shell loader machine. I have the roll crimper I bought after U did the HOBO slug video. I just need the improved UJ/SST plastic thingers.
@unclejim23308 ай бұрын
Do you have a 3D printer? As for loader keep an eye out in local ads for a good price on a MEC 600 JR. 👍 A Lee press will work but you can see the difference in action. 😂
@irmuggle3 ай бұрын
Absolutely.Brilliant and and if you want to straighten out your 12 gauge do you like?I didn't go to the goodwill and buy you a curly and iron and pull off the clamp and just slide the chuck and shell up on that and let it heat up and it'll straighten right out
@unclejim23303 ай бұрын
Haha, thanks. 👍
@ocean3748 ай бұрын
Nice and easy I made some using 3/4 pvc and a utility knife after a while it was a pain so I invested in a good one thanks for sharing
@unclejim23308 ай бұрын
Thanks Julio. 👍
@georgiaboy44108 ай бұрын
That worked good.I saw that Ballistic products trimmer on Bubba Roumdtrees channel, it worked pretty slick. I’ve got a big bag of old paper hull shells that I need to go through. We picked up a new shotty yesterday from a cool new gun store we just found. 👍🏻
@unclejim23308 ай бұрын
What kind of shotgun did you get ? 🐿💥🐿💥
@georgiaboy44108 ай бұрын
@@unclejim2330 I’ll give you a hint. “ shakin the bush boss, shakin the bush”😆
@unclejim23308 ай бұрын
@@georgiaboy4410 hahahaha, love it. 👍🐿💥
@sixshootertexan8 ай бұрын
👍🇺🇲🤠 Oh, great, another project for me. Brilliant.
@unclejim23308 ай бұрын
😂😂😂👍🇺🇸
@mrsmel2698 ай бұрын
nice diy UJ. the snow looks peaceful were on track to get 8-10 by wensday hope there wrong hahaha
@unclejim23308 ай бұрын
Embrace the snow! 😂👍☃️
@williamganley47398 ай бұрын
I've normally use stacked books and insert a razor blade to whatever page you need. This works well for cutting aluminum cans to make alcohol stoves. It might work for trimming plastic hulls. The trick is not to cut everything at once but just make several revolutions.
@unclejim23308 ай бұрын
Thanks, I’ll try that trick on cans. 👍
@tripplebeards34273 ай бұрын
I haven’t drilled a hole in mine, and the stupid blade keeps falling out. I think I’m gonna drill a hole and then JB welded in place. Then I think I’m gonna drill in the end like you said and JB weld the nut flush so I can screw a bolt in and out and adjust it.
@unclejim23303 ай бұрын
Drill a small hole and tap it in , no need for JB. 🤷♀️
@tripplebeards34273 ай бұрын
@@unclejim2330 the hole has to make all the difference in the world
@thorsaxe58818 ай бұрын
Not to be a safety sally, You be careful with that Jim, I would hate to see you have a accident and the next thing is we see you in a video with your hand all bandaged up. Peace dude - Dave
@unclejim23308 ай бұрын
I’ll put a safety on it but when the dowel is the right size you just use your fingertips. 👍
@Michigan4Conservative8 ай бұрын
Oh no...look at that snow.😮 I just finished the soffit and roof trim. 3 corners to attach and the small garage door (once the track arrives) Looks like I beat Old Man Winter.. Nice bench top solution. Thanks for sharing.
@unclejim23308 ай бұрын
Hurry! We have snow all week. ☃️
@Michigan4Conservative8 ай бұрын
@@unclejim2330 the snow plow is on the Polaris Ranger, The Kubota blade is on, I moved a bunch of stuff from the main garage to the shed. My ride now fits in the heated garage. All set for winter (glad it came late) 😎
@fuzztfork88 ай бұрын
YOUR IDEA OF TRIMMING AND TRIMMING UNTIL THEY ARE NO LONGER USEFUL, CAN ALSO APPLY TO PISTOL CALIBERS THAT HAVE SPLIT NECKS DUE TO HEAVY CRIMPING ON SAY 45 LONG COLT OR 44 MAGNUM, JUST REDUCE POWDER, AND YOU CAN STRETCH ITS LIFE..
@unclejim23308 ай бұрын
Yes. 👍
@jamespollard16708 ай бұрын
That'll work fine . I bought a printed trimmer on line for about $10 .
@unclejim23308 ай бұрын
Lame! 💥🔨
@jamespollard16708 ай бұрын
It was adjustable for length and and had a built in guard for cheap .@@unclejim2330
@tripplebeards34272 ай бұрын
I've been using what you made without a screw in the bottom. It cuts uneven. Guessing a round headed screw in the bottom will index the primer hole for a more consistent and even cut. Also the blade keeps falling out. I am going to cut a slit or drill a hole and glue the blade in place of the slot or hole.
@unclejim23302 ай бұрын
👍
@StagArmslowerАй бұрын
I have brass pipe cut to the length of the hull I want to cut to and use hose cutter driving the blade against the pipe smoothly sanded end. The diameter of the pipe is tight, and it rests on the hull's base front edge so I can grab it better when cutting
@unclejim2330Ай бұрын
I’ve use conduit but this is so much better. 👍
@T.A.B.Videos8 ай бұрын
pretty cool
@unclejim23308 ай бұрын
👍
@maxxbear50146 ай бұрын
That thing works great. I like the simple ideas too. Think I’m going to make one for small runs of stuff. I watch all the smaller channels too. I watch that guy making 4570 jacketed bullet. He had a great idea to.
@unclejim23306 ай бұрын
👍🇺🇸
@oddballschtuff8 ай бұрын
No, I’m looking back with great regret. I should have fixed that old shotgun press that I dug out of the garbage. What was I thinking that is a really cool idea. I thought your original idea was pretty dang ingenious, and I think that proves the fact that you’re pretty much the coolest person on earth.
@unclejim23308 ай бұрын
Lol ! Cool? Yes because it’s cold out right now. 😂👍