MORE..Shotgun Shell Trimming

(Sorry for the focus issue....)
A quick video on another way to trim shotgun shells to prepare for roll crimping.
Here is the link to the other video I posted on my DIY Trimmer:
public.fotki.com/Rbertalotto/...
Creative Reloading Solutions:
www.creativereloadingsolutions.com
My Web Page:
www.rvbprecision.com

[@digitalman269]

Did the same thing, except I used a windshield wiper motor mounted in an ammo can. Now I can trim hulls inside the house and not be stuck in the garage using the drill press.

[@roybertalotto6355]

Great idea on a windshield wiper motor. So many uses for those high torque, reversable, variable speed motors!

[@tripplebeards3427]

Ive reloaded BP roll crimped 10 gauge plastic hulls over 8 to 10 times now and the hulls are still going strong. Never re trimmed shorter yet. I had a few that a pellet burnt through the plastic hulls when firing. Those get tossed out. Great idea!!!! I keep trimming mine with a razor blade pounded into a dowel. Never get an even edge. I might have to stick a screw in the end of the dowel. Maybe it will help with more of an even cut vs just indexing on the wood dowel edge?

[@roybertalotto6355]

Might have to tru reloading. How did you remove the roll crimp to get a new wad in?

[@tripplebeards3427]

@@roybertalotto6355 I guess I don’t understand what you’re asking. If you’re talking about tearing down existing ammunition that hasn’t been shot I’ve just taken a small flathead screwdriver and slowly pried up the inside lip all around it until it opens up. The only reason I’ve done that is if I did a poor roll crimp and it didn’t turn out good or if I decided to tear down a few loads that didn’t pattern a darn, and I had a few extra loaded up.

[@roybertalotto6355]

@@tripplebeards3427 Im tslking about reloading once fired roll crimp shells. With black powder, the crimp ends up all melted and wonky…

[@oregonian3238]

That video could have been 90% shorter and just as informative. Long-winded does not get likes and subscribes.

[@roybertalotto6355]

But you watched it! Thank You!