An Explosion and a NEW 715 Quadtrac!

Road grading, combine prep with what Tony deems as 'Project 9240 Explosion!', all the while spraying in the mornings before the heat sets in.
And talk about HOT...the BRAND NEW 715 Horsepower Case IH Quadtrac arrives!!! ‪@CaseIHTube‬
Combine Coneliner/Transition Cone redone with Stewart Steel products. Check them out here: stewartsteel.c...
__________________________________________________
YOU CAN ALSO FIND TONY ON:
***Instagram: / fast.ag.mt
***Facebook: / fast.ag.mt
***Twitter: / fast_ag_mt
***Website: www.fastagmont...
***FAST AG APPAREL (as well as MN Millennial Farmer, Welker Farms, Larson Farms, Sonne Farms, Brian's Farming Videos, and so many more):
farmfocused.co...
****FAN MAIL****
Tony Fast/Fast AG
PO BOX 267
Glasgow, MT 59230
_______________________________________________________
~~~Toolbox Widget Code "TONY"
toolboxwidget.com
~~~Farver Farms Lentil Crunchers Discount Code "15FAST"
farverfarms.co...
~~~Brunt Boots Discount Code "FAST10"
bruntworkwear.com
~~~Check out Phiber here, where we got our DASH spray trailer from:
phiber.ca
~~~Check out May Wes Manufacturing here:
www.maywes.com
***Tony's Amazon Gear:
www.amazon.com...
Music
www.epidemicsound.com
www.bensound.com

[@MB93WP]

Congrats on the new 715 can’t wait to see it pulling that 100ft drill

[@zpnich27]

Congrats Tony that’s a beast of a tractor! You and Mike Mitchell will have to put them up to the test!

[@jasonrathgeber5999]

We need a Tony Fast and Mike Mitchell collaboration one in Sask and one in Montana ride along

[@jaripukki267]

did Mike make the decision yet. He said previously, that he might cancel the order

[@rawhideadventures9515]

That new Quad sure is awesome to look at.

[@Rooftopmatty]

You’re going to enjoy that new 715, there’s a local farmer to me who got one for spring plant and everyone on that farm including hired hand who drove it all spring absolutely loved it

[@michaeltablet8577]

Great video! Good to see you back, Tim. Condolences on the loss! God bless you all!

[@elvisbrown4345]

Sure am excited about your new Quad track! Great to see Tim back working with Warren! Tim is a fellow Hoosier! 🙋🏻‍♂️👍🏼

[@timothybailey7118]

Drove through your area last week in the way to Glacier NP. Hot 🥵. Wanted my wife to see the Big Sky but instead we saw smoke. Oh, well, we still enjoyed our trip through MT.

[@FuturesandCharts]

I remember changing out a transition cone on a 1460 IH, probably 35 years ago. It was quite a job.

[@jessenp20162725]

Congratulations on the new tractor Tony. I’m excited to see it in the field!

[@Ralph94967]

Come on Tony the concaves cant be that heavy Scot over at welker farms can put them in with one arm Glad to see Tim back heifer calve happy days Tim

[@jimholty2274]

I'm happy for you. That is a sweet tractor!

[@mattphillips4260]

you guys need the new 715 to pull that monster drill you have

[@OutdoorsEquipmentInFargoND]

Enjoy the new toy!!

[@markyoull6744]

great stuff carnt wait see it on the drill

[@davidkimmel5153]

Thanks for sharing 😊

[@robindelorme1139]

Just finished fixing the same rock damage on our 30 series concave frame. Stupid Rocks!!

[@joeschindler4494]

Cute tool buckets

[@melvinalbert6172]

That’s the fastest I have ever seen a road grader grade a road lmao😂

[@zcole6612]

I'm ready for the harvest videos .

[@gregedwards2532]

Love to watch your videos we came to Montana from Indiana to visit Montana and purchase an RV from a fella in Livingston Montana. We purchased it. He told us that it was winterized. We got to the campground after we purchased it and come to find out everything in the camper was frozen Water heater washer dishwasher waterlines went back to the fella and he said too bad. I thought people from Montana I could take their word for it better than any other state. Come to find out he was from California moved to Montana Livingston in 2020. It gave me a bad impression about people in Montana until I found out Gary Bates was from California. We would love to come back and tour your great state we didn’t get to because of the situation from the purchase of the RV.

[@user-br9bq9vu2d]

Most Californias are dirty democratis that why they should build a wall so nobody can leave

[@tomn7087]

Great job on the video. How did you guys learn to do all the work on the combine - impressive you can do anything. 715 can't wait to see it in the field

[@wagon9082]

Good video

[@farmshoffman8475]

Great awesome video,

[@thomasleonard1846]

MoreFastAg!

[@danieljohnston5306]

Sweet!!

[@jmazoso]

badass

[@jimmclean160]

I know all too well on changing out concaves we had to go from small wire concaves to large wire concaves for different crops that we grew on the 1680 axial flow machines we use to have on the farm !!

[@M.BFarms]

Watching all this work you are putting into the rotor...at what point do you decide to just trade combines? Engine / Seperator hours? Weak Hydo? Oil Consumption?

[@arthurok327]

Howdy Tony, Tim, I hope ya'll are doing well, I was expecting to see an explosion like your title clearly stated " Explosion " except there was no explosion !? I feel like that title was as they say " click bait " 😂 Stay safe, God Bless and Farm on my Friends

[@ahohlen1]

“Project 9240 Explosion”. Tony says it himself! 👌🏼😉

[@arthurok327]

@ahohlen1 yes I got that, I've watched every video he's put out for the past couple years, but I don't remember seeing an actual explosion..

[@ahohlen1]

@@arthurok327 That’s because there wasn’t an actual explosion. It was just Tony’s sense of humor in a play on words! He says it at 7:35

[@farmshoffman8475]

As you say the combine got its guts ripped out

[@brucebiehn2123]

Do you ever dynamically balance the rotor on your 9250? Or does your dealer have balancing stand or access to one. You can find companies that will come to your farm and balance on site.

[@wayner806]

Nice

[@chipps1066]

I wonder why Case-IH doesn't build the concaves out of aluminum,would they wear a lot faster?

[@delbutler885]

Most concaves are chromed to wear longer.

[@mizzoutigers1925]

Easy Tony, don't hurt your back again!

[@johnsonfarms4788]

Did you order the new tank with 950 tires on it? We always used to order our 700s with 950 rubber and the 950s got 1300 tire setup now

[@edwhite6250]

👍

[@dominicdahlheimer6861]

How long do you expect "dealer prep" to take on the new quad?

[@fmerkl]

You guy's make that look so simple ! I"ve helped once ! and it didn't go smooth !

[@joeldurheim5831]

Did you cut off the first threshing element off top and bottom? I have done 5 machines and the cones wear about 50% longer and it doesn’t seem to affect anything else. The local Titan store cut them all off now too.

[@rodkinzler9275]

This really does work

[@nigelgribble8736]

I'm confused you went to one large drill to simplify things improve logistics and save labour. The smaller drill was bought for steep banks and slews but now you are effectively running 2 outfits again and costs of running 2 large tractors which you said you wanted to get away from?

[@FastAgMontana]

Early seeding pays 9/10 years.

[@280813jb]

I know nothing about Rotor combines, is this normal maintenance on a Rotor after so many hours of use or was the repair due to a rock or some foreign material got into the Rotor?

[@FastAgMontana]

@@280813jb regular maintenance. Combines have about 1300 hours on them.

[@flyboy6876]

Who says farmers just sit all day going round and round

[@everettparkin9795]

Why do I see maintenance like you guys are doing not being done by the Green tractor owners?

[@markosmond6430]

Watch farming fixing and fabrication channel if you want to see green paint being worked on

[@j.e.honiball1327]

ZK Master tech does all the green maintenance

[@mattroelfs4492]

What's the "NAFTA" sticker on the windshield?

[@pattschetter]

Really should be "USMCA". But I'm going to guess this was to indicate that the tractor was destined to be transported within North America, and didn't need the additional preparations against salt water exposure that can be needed for shipping machines overseas.

[@codyvandieren2069]

Do you have contact info or a website where a guy can purchase one of those rotor tools?

[@Mikes_Repair]

How many hours on the 580? Is it staying?

[@ytfan3815]

He definitely needs a high hp-tractor when he stalls his 715 in the mud. 😉

[@libertyforever836]

Good for you! Buy red tractors everyone! After the idiots at John Deere turned on the values of American farmers and went woke, buy red tractors! Boycott John Deere!

[@eddienash5426]

NAFTA?

[@tangovictor6505]

First

[@oscarcook6884]

Isn't it too hot there in the summer to wear a beard?

[@cjpiper2420]

Farmers struggle…….laughable