Anamorphics and In-Camera Stabilization - Anamorphic Cookbook Module 7 Chapter 4

[@mpatercologne]

As always: Great content! Highly appreciated!!!

[@lexxspy]

Thanks!

the most awesome thing about anamorphics on the ronin 4d is that the flares are not jittery at all. Even in sportsmode :)

[@pats_seidl]

Great video thank you! I did not know that I am not supposed to do the crop factor calculation!

[@bencorwin]

Soooooooo good! Thanks!

[@agustinsaavedra2752]

Best video on anamorphic in-camera stabilization. Crazy that Lumix is the only one with that feature. There is a "work around" for other cameras if the resulting horizontal focal length is used in the stabilization menu.

[@lucasventer]

Hi Agustin, that's very interesting. So if the lens is 50mm and the squeeze is 2x you would set the focal length to 100?

[@agustinsaavedra2752]

@@lucasventer Hi Lucas! yes, exactly that.

[@lucasventer]

@@agustinsaavedra2752 Thanks, going to try it!

[@agustinsaavedra2752]

@@lucasventer You welcome. Hope everything works fine.

[@yariubelt8273]

What do you think of guroflow? Have you ever used it? I have a Sony A7IV and I ordered Sirui 35 mm 1.33 anamorphic, and I would like to understand how to stabilize it in post with this program, if there is a pre-existing profile to load

[@RalfLange]

Thank you for this exceptionally instructive video. What I haven't understand yet: if I can't tell my camera anywhere that I'm using an anamorphic lens, only the focal length of my lens, then what focal length do I use, the original one, for example 50 mm for a 50 mm lens or, with a stretch factor of 1.5, 33 mm?

[@AnamorphicOnABudget]

Use the focal length of the lens. No crop factor, no squeeze math.

[@Jajajajanee]

Hi, just wondering. Is barrel distortion or pun cushion distortion provided in one lens? Or is it a characteristic of a certain brand and focal length? I am looking for a 35mm lens with sqeeze 1.6 and barrel distortion

[@AnamorphicOnABudget]

It varies from lens to lens, according to their design. There are some with pincushion, others are barrel, others are rectiliear.

[@Jajajajanee]

⁠Thanks, can you recommend a 35mm 1.6 squeeze with barrel distortion?

[@AnamorphicOnABudget]

Only Sirui makes 1.6x squeeze lenses. But they don't have barrel distortion. So I can't recommend anything that fits that description.

[@AIexisD]

What about vertical anamorphic ? If I mount my camera vertically but keep the lens straight (with PL mount) should I turn stabilization OFF ?

[@AnamorphicOnABudget]

This is too wild of a question. I'd say at that point you have to run your own tests. hahahaha. When in doubt, keep it off! :D

[@waynosfotoscameras]

So did you quickly say near the end, if filming off a monopod, turn in body stabilisation "OFF"?

[@AnamorphicOnABudget]

I'd say if you're filming with most types of support, turn off stabilization (tripod, monopod, gimbal). I'd keep stabilization ON for easyrigs and handheld.

[@waynosfotoscameras]

@AnamorphicOnABudget thank you

[@MarkAngeloMazzola]

I love how he pronounces 🔪 -sation

[@AnamorphicOnABudget]

Hahahah thanks! It's to make it deeper. :P

[@juliaopantoja5659]

Dublado!!!