Andis t-outliner repair tension adjustment

[@symphonyoftheday5519]

Thanks Man, Saved me $70, who knew it was a simple screw adjustment in the inside of the Gtx Clippers. It was just the middle screw now they work like they just came out of the box.

[@bsmoove3x443]

Real pro, I need mine sharpened, adjusted and help with tension

[@csjr9]

Bro you know your "ish" man. Love cats that know their craft. Im going to send you some blades to sharpen man.

[@vedoyabarfavbar3248]

Hey Thanks for all your supportive videos you put out!!! Quick ? If you turn trimmers on and blade and tension arm not moving at all , but you hear them turn on, what issue am I having ?

[@cloudsdiamondsharpening3973]

tensions is to tight or rust on the blade

[@Smokey66s]

“Music” detracts from great informative videos?

[@cloudsdiamondsharpening3973]

Hello I am very sorry you don't like the music but a lot of other customers like the music. But thank you for watching.

[@WoodyJr27]

Ok if i send it to you what will you charge me to get it to 100% and how can i get it to you

[@SussAmoreEnt]

How did you get the cutting blade to travel to each side of the blade at the end of the video? Have the same problem , cut good right and left of blade but not the middle

[@cloudsdiamondsharpening3973]

If it's not cutting in the middle, either the blade needs to be sharpened correctly and/or there's a tension issue.

[@joelperez8138]

yo tengo una gtx y por estarla molestando lo que hice fue dañarla,me toco comprarme otra

[@bonafide154]

hey man i need a new cord for my andis t outliners and also need to get the blade sharpened as well? Can you help me out Thanks Eldar-

[@cloudsdiamondsharpening3973]

Hello. Yes I can. Please visit www.diamondedge2015.com for details on how to ship safely and my address

[@cloudsdiamondsharpening3973]

Please put contact information inside the box with email address

[@WoodyJr27]

Hey i have a question... i dropped mines a few months ago, and i noticed that the arm isnt centered in the middle anymore and the bkade is running off the side some... what should be done.. also i hae a pair that is very weak and the blade tends to be still at times while still running whaT do you advise?

[@cloudsdiamondsharpening3973]

@woody da barber Hello. Well it not being centered in not a big deal if the cutter blade doesn't hang off the comb blade. But the lower power is bc you bent the blade mount. You can either bend it back (which I don't recommend bc you don't know where it should be) or you can try to adjust the tension spring and try to get the ball of the arm into the middle of the cutter blade. Then last option is send it to me and I'll fix it.

[@Thadon33]

Cloud's Diamond Sharpening How do you center it, if the center blade DOES hang off the comb blade. Today, I noticed that with my T-Outliner.

[@joecool97]

Will using a pair of Pliers damage the Tension Spring? Just want to be safe than sorry.

[@cloudsdiamondsharpening3973]

joecool97 hello. Not if you only bend it a little. But not recommend. It's better to move the blade if it's not to bent.

[@joecool97]

Cloud's Diamond Sharpening Thank You so much! I just got a pair of trimmers fix with a new Tension Spring. All I do was my move the screw for the Tension and made it slightly about center.

[@blue1966-u3j]

I am japanese barber Do you know why there is when you do not cut the time expires by the Andes of clipper use have Settings?

[@cloudsdiamondsharpening3973]

Hi. it depends on the sharpener and how many heads you cut and if you use oil. there is no set time they should last.

[@blue1966-u3j]

+Cloud's Diamond Sharpening Thank you! I will do my best

[@othonielcervantes4410]

👍

[@qballvip]

how do you know how much to bend the tension spring?

[@cloudsdiamondsharpening3973]

+Quinton “Qu3 da Barber” Hall Look at a new spring. The spring has to hit the middle of the cutter blade with about a pound of pressure on the blade.

[@tyrantwatchers6319]

Yay! Yayyyyyyyy!

[@dinostarkey]

you didn't tighten the bolt on the arm of the black pair!other than that good job!

[@cloudsdiamondsharpening3973]

+robert starkey I did later but thanks for your concern.

[@cloudsdiamondsharpening3973]

you are welcome. Thanks for watching.

[@EliudSena]

I've noticed that too n other video, he does a good job tho!

[@robertrobles7331]

can I send my machine to you for this

[@cloudsdiamondsharpening3973]

yes you can. for information, WWW.diamondedge2015.com or Google Clouds Diamond Sharpening..have a great day.

[@josebatista3529]

Why is there a gap between the hair guard and the blade? It's still there after you moved the hair guard up.

[@josebatista3529]

I ask because I switched the housing on my outliner from gray to black. It has a gap with the new housing on it. They have never been dropped or damaged. The tension is still factory set. Only changed housing. Works just as it should. Any ideas?

[@cloudsdiamondsharpening3973]

+jose batista How close do you want it? The blade has to move. Hair will get in it no matter what you do. If it runs good, why mess with it? The clippers job is to cut hair, if it does that. The only thing you can do is dismount the field and armature from the housing. Then hit the the case brass inserts into the housing. but i don't recommend that because you'll have to adjust the armature then. Good luck, have a great day.

[@josebatista3529]

+Cloud's Diamond Sharpening thanks for the relply. I know there has to be a gap in order for the blade to move. I was asking because there was a bigger gap in my outliners after I switched housings. I just wanted to know if there was a reason such as different molds or not sitting right. Great video by the way.

[@cloudsdiamondsharpening3973]

+jose batista Oh i thought you meant mine was too far apart. HAHA. yes, at some point they switched housing from flat to having a little lip for the housing to seat better together. But i wouldn't worry about it too much, if it's not affecting the cutting. You just might need to clean sooner than if it was closer. I'm glad I can help. Have a great day.

[@johnjames3469]

Cloud's Diamond Sharpening do you have any that's 0 gapped, sharpened for the extra sharp tape line, & all around fully surfaced. what's prices like for them

[@amy6322]

so dirty, i dont understands, step by step u teach us

[@33craigcarter]

why cant you use string to see if its cutting

[@cloudsdiamondsharpening3973]

+33craigcarter i dont use string because its a trimming blade. The teeth are to small and could damage the cutter on the blade.

[@Jarcu88]

I have the gtx brand new and i never did a proper line from the begining and i tried adjust them after i watched youtube videos and i broke the screws and the tension spring so i ordered new tension spring and screw but seems to me that is to complicated when you buy a new trimmer witch everybody says is the best ,should work from factory setings why you should adjust them not everybody has skills and i payd 70£ for it i feel like a fool

[@cloudsdiamondsharpening3973]

+Maryo Jarkone I'm sorry you are having trouble. I can fix them but I will have to charge. I recommend sending back to Andis for warranty because it should be free. A Lot of barbers would buy them and get them sharpened out of the package. But you should not have too.

[@davidgreen2442]

They are Pump Pliers

[@kastanza19]

Tongue and groove pliers*

[@leepitts7844]

Shave it off then😂😂👏🏾