Andis ML Master Clipper Service

This is how to adjust ML master clippers. To make the blade move to the most powerful point and make this clipper as quiet as it can be. I hope i helped. Have a great day. Keep it sharp and keep it running, Those are your only options.
#cloudsdiamondsharpening
#barberlife
#hairclippers
#barber
My name is Nick George with Clouds Diamond Sharpening. I sharpen on a diamond sharpening wheel (grandpa made the wheels shape and figured out how to use the diamond process. that's so fine at 1500 diamond grit, that polishes your blade sharp. I fix any clippers that have parts available. I can sharpen any blade or scissor that can come apart. I sharpen convex, semi convex, chunkers, thinning, fabric, surgical, and little scissor at a fair price. Check it out on my website WWW.diamondedge2015.com
Call me at 682-559-7558 to use my services. Please leave a message if i do not answer.
Email : [e-mail]
Facebook : Clouds Diamond Sharpening
Google+ : Clouds Diamond Sharpening
Instagram : Cloudsdiamondsharpening
Twitter : CloudSharpening (i'm horrible at using)
#clipperrepair
Thank you music man....
"8bit Dungeon Level" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons...
"8bit Dungeon Boss" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons...

[@mariabeverly8263]

Man right on thank you so much for this very much needed video, no nonsense get it done 👍🏽

[@dkanthony8265]

you helped me out my brand new masters came with a lot of problems thank you

[@gregoryizeks]

This is probably the best vid I watched on tuning/troubleshooting the Andis master clipper. I used my clippers once then the second time it was making a loud ass rattling noise. I watched a couple vids and tried fixing it but I think I did more damage then repairs. Shits all outta whack. I cant wait to go home and try your tips.

[@cloudsdiamondsharpening3973]

+gregoryizeks Thanks and thanks for watching. If you have trouble, send it to me ill make better than new.. www.diamondedge2015.com

[@cpt_rascaltascal3310]

@@cloudsdiamondsharpening3973 ARE YOU GUYS STILL IN BUSINESS?

[@cloudsdiamondsharpening3973]

@@cpt_rascaltascal3310 hello yes I am still in business

[@cpt_rascaltascal3310]

Lovely that's great news been looking for place like this for a while do you do zero gapping as well as sharpening cleaning all of that type of stuff modifying any of those things

[@cloudsdiamondsharpening3973]

@@cpt_rascaltascal3310 awesome send them my way and I'll take care of it. take a look at my website www.Cloudsdiamondsharpening.com

[@Rayjpc]

Awesome video I have the same problem with my andis fade master I buy last week one brand new and every time i started make a lot noise so thank u so much to show how I fix my andis is my first andis always I use different clippers but now I see how u do thank u bro

[@cloudsdiamondsharpening3973]

+Raptor 700PR Your welcome. When that blade gets dull send it my way and ill make it better than new. Have a nice day.

[@Rayjpc]

+Cloud's Diamond Sharpening thank u so much bro

[@iGotNEXT_Mack]

Hidden Gem

[@B1gDos]

hey man, thanks for the video. now i know a lot about the andis.... look i live in spain but i have a andis fade master and i have a little problem whit it. i like to ask you, why the arm of the andis sometime hit the right side of the body? and how can i fix it? if you can answer men please i appreciate.

[@cloudsdiamondsharpening3973]

+Ozzie Santana you'll have to loosen or tighten the side smaller screw of the clipper until it doesn't hit it any more but if you dropped it, the field may have fell off the mount. if the arm is hitting the field, use a flat head screw driver and pop it back onto mount. More info will help me help you better. Thanks for watching my video. i hope i helped you with my answer. Have a great day.

[@blue1966-u3j]

is Japanese Clipper of adjustment could not understand We were able to adjust thanks you

[@marcellowoodford4048]

The 2 Screws on my (newish) Cordless Andis Masters that Hold the Blades in are worn Round and the Philips-Head screw-driver can't Un-screw them-so Can I please buy 4-Extra screws from you guys? Thanks,Let me know how Best to pay your fair price. P.S. I'm in England!

[@cloudsdiamondsharpening3973]

You'll have to find Andis distributor. Or you can try ordering them from the PetEdge. Thanks for watching

[@elderreyes3782]

Hello, I took my blades off my cordless masters to sharpen them and clean the clippers. After I put the blades back on, they dont cut anymore. they make a noise and the blades move but theyre not cutting. I tried to pull the tension spring to give it more tension but it didnt work. Can you tell me or show me in a video how to put the top blade back on over the pring to see if im doing it right? Please Help!!!!

[@cloudsdiamondsharpening3973]

Hello! You cannot sharpen a blade on a block. It's not going to cut if you get it. Working. Blades are not flat when they are flat. They Are dull. My wheel puts shape on to them. Without the correct pattern they will never cut. The little notches in the fork go on the two pointy pieces of the cutter blade. The white plastic part. I do not have an ML in my shop right now to show you. I am sorry

[@blocboi-o5439]

how do u charge to service? n does service cones wit sharpening?

[@cloudsdiamondsharpening3973]

+Orlando Bates $15.00 for Adjustment and sharpening of the blade is $6.50. All Prices on my website www.diamondedge2015.com . Have a great day.

[@igotyoufaded7810]

Where can we ship clippers?

[@cloudsdiamondsharpening3973]

Hello please visit cloudsdiamondsharpening.com scroll down to the bottom and there's a shipping address and videos on how to help ship

[@cdrosancho5338]

should of left out the music

[@cloudsdiamondsharpening3973]

young lazy hit mute. problem solved.

[@raiderkendall]

@@cloudsdiamondsharpening3973 no matter his name lazy.hahaha

[@robrodriguez8301]

just got brand new Andis fade master and it makes louder sound then I've heard on videos on KZbin, will this help the problem?

[@cloudsdiamondsharpening3973]

Adjusting that small screw could help if the armature is hitting the field and making that loud sound but you might just want to send back for warranty if that dont fix it

[@robrodriguez8301]

Cloud's Diamond Sharpening it worked thank you! how would I loosen the lever if it's too stiff

[@cloudsdiamondsharpening3973]

Rob Rodriguez you will have to remove the blade to adjust the adjustment lever

[@precisescents8515]

Hey bro can you make a video on why the fade master is cutting alot of bulk off it gets stuck

[@cloudsdiamondsharpening3973]

N.D. DA BARBER no I'm sorry BC they all cut great when I'm done. you need them sharpened and serviced. thanks for watching

[@wick3done1]

I think I’m gonna send my andis masters to yoh I think I messed them up cuz ever time I try Nd put the andis cool care on the blade Nd I put the oil the blade just stops working 😡

[@cloudsdiamondsharpening3973]

Alyssa Llanas hello. Np I'll get it running great again. Please watch my safe shipping video at www.diamondedge2015.com. please put contact information inside of the box and I'll let you know when I receive it. Thanks for watching.

[@wick3done1]

Ok I’m gonna need one of your boxes I’ll pay for that too

[@cloudsdiamondsharpening3973]

Alyssa Llanas np.