6" Lifted 3 wheeler on 30" Silverbacks RIPPIN' MUD!!!

Video of my lifted trike, fun little rig to play in the mud! more videos to come!
Pretty impressive how a 200 can rip 30" silverbacks like that Sub&share!!

[@Junkpowersports23]

Anybody can go through a mud hole with a brand new can am not everyone can do it with a 35 year old trike

[@BowtieLS6]

Honda baby. Thing will run forever. 2nd gear all day 👌🏻

[@redston101]

Can you do a video on how you put on the 6" lift

[@leahryan7011]

That’s what I nred

[@nateaskew6568]

@@leahryan7011 he just relocated the rear axle down 6”, by taking it out, and moving the top bolts on the axles to the bottom bolt holes on the frame then built a brace for the bottom. You can see how he did the front

[@judyperrine4258]

One of the best 3 wheeler I’ve ever seen

[@deegasman4788]

Judy Perrine. Imo its still the best toy ever made ..

[@Ultraphish101]

I lifted my 1983 185 honda . Thanks for the great idea. It's a beast in the snow!! Great videos!!

[@andremartinbike]

Thanks! Haven't tried in the snow yet, hopefully this winter.

[@saintsfisherman]

I love three wheelers so much!!! LOL I have a big red and I get excited like a kid to ride it all the time. Love the video!

[@Geonious]

Nice job on the wheeler. And thx for the good editing on the video. The music didn't drown out the sounds of your ride.

[@andremartinbike]

Thank you sir!

[@davidfultz6483]

André Martin Is that a stock 200s chassis with bigger tires and that's it? Or are there some mods I need to do ? Can you shed some light on that awesome machine for me. THANK YOU and KEEP ON WHEELIN'!!!

[@andremartinbike]

David Fultz its a 200e, has high and low range and has a 6 inch custom lift on it, Thanks.

[@wilfredheggart647]

your welcome did you get my comment

[@noahconnolly6450]

@@andremartinbike 200 es

[@jamesedwards8805]

Nice. Brings back memories from the 80's. Wish I had another one.

[@junkyardhemi]

Nice. I used to run a Yamaha YTM 200 through water up to the seat. Seriously fun!

[@yggameplays7448]

Thats technically water cooling..

[@chadfolmar5900]

Yolos Games for sure

[@benjaminhayes4253]

the only thing I could think of when I saw this I can't wait to get mine. running... dude your toy is bad ass I can't stress it enough 😍😍😍

[@lloydnielsen8035]

Nice. Reminds me of my first Honda a three wheeler. 200 cc. Loved that bike it would go any where

[@whiskeybuilder6335]

You have a super cool machine! Love that you don't hesitate to point it at a hole and pin it!👍

[@andremartinbike]

Yessir full send or no send! Thanks!

[@maniacmikef3348]

I so wish I had my ATC 's had 200 250sx 185 and a 160. Awesome job on it sweet vid.

[@DJ-zs7ms]

Man looks like a blast me and my brother had a big red Honda three wheeler

[@kinghoffbeers4221]

That looks so fun!!!😁🤪👍👍

[@snoopyroman3781]

Making due with what you got! freaking awesome setup for your quad looks like it does great!!

[@glennzlotowski8020]

Damn , master of wheelies . Awesome video

[@jeremyl9801]

Bad ass. Always loved 3 wheelers especially Big Red..

[@jakegallant5619]

I wish this one was a big red. That would b sick

[@upsidedowndog1256]

Great fun. They should have never stopped making those.

[@thistledewoutdoors3331]

Big red 250es was an unstoppable machine !!! Cant tell you how many beaver ponds that hog went thru in all stock trim !!!!!!

[@jermainephillips5179]

Loos like a 200.chain drive.big red was shaft.did call a 200 big red at 1 time though

[@lowlifechris5833]

That’s the craziest looking bass boat I’ve ever seen.

[@mikeyerke3920]

André, thanks a lot. Now I need to build one. You’re costing me money man! LOL! 👍

[@andremartinbike]

Mike Yerke Haha it will be worth it!

[@famousmidnight]

Pretty interesting lookin' boat

[@richbo666]

NICE ! thats a good ATC right there.

[@michaelmolnes4901]

Like the video and the bike keep having fun

[@cindyleeman197]

That goes badass is it a big red .??? U gotta think to when u go into a mud hole that's got decent ruts and your front tire falls into either side that slight angle is gonna be beneficial making your back tires grabbing at walls .... Keep it up bro

[@WarHammer4702]

Hell yea! Awesome vid! Nice rig too...

[@andremartinbike]

Thank you!!

[@wilfredheggart647]

@@andremartinbike my names not jake its wilfred

[@fatbuddycat]

Lol, saw your buddy eat $#it in the background at 1:37! Nice wheeler, real nice riding skills. Reminds me of my old friend Chris, he swore by 3 wheels. When he got his Honda 350R it was game over! He got the nick name Rubber Band Man because he was so good at loosening his body during gnarly diggers. Good times. Ride safe brother and always wear a helmet, I've scene some bad things happen in the woods. Everything from tree limbs sticking out of dudes chest to pretty serious compound fractures. If you break your noggin you may never be the same.

[@rednecksdailychannel]

that's a pretty sick little toy I got a Honda110cc I've had mine for a year or two there good little toys frfr

[@rovidbouski4022]

Wow! What gearing changes did you make to keep it from roasting clutches? That thing is badass!

[@northern3wheelerassociatio958]

Jesus thats a good setup.

[@simsonhd2686]

Best video on yt :D I love this 3 wheelers so much!

[@andremartinbike]

Thank you for the positive feedback!

[@wilfredheggart647]

@@andremartinbike your welcome they just made me mad

[@250rtrxjunkie]

Nice Beast!

[@BillBlast7372]

*SOLD ON IT* I thought it was cool, useful, effective & great workmanship throughout the entire video but at the end, the wood pile.....SOLD ME ON IT & I LOVE IT!!!!

[@BeamerTheFox]

awesome trike an awesome video thanks for sharing.

[@andremartinbike]

Thank you sir!!

[@xxkillergod478]

Pure genius!!!

[@ehTV1000]

Kick ass buddy, going to post on our group page. Cheers

[@andremartinbike]

eh TV Thanks what is your page?

[@ezq6664]

Great vid.

[@svthonda4236]

That thing is amazing

[@shadyhill1476]

Wow need to step up my 3wheeler game

[@fish_R_stinky69]

INSANE I LOVE IT!🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩

[@zquad5853]

Awesome...

[@eightywon1357]

this is a good video

[@gregmorris2022]

Awesome

[@James-of1hs]

Nicely done.

[@OneSixtySwiftly]

This 200es Looks Beast!

[@isayahjf487]

It’s a 200s I believe, it’s chain drive with an upgraded oversize rear sprocket to move them silverbacks with ease

[@fish_R_stinky69]

Those tires dude!

[@NoFishNicksAdventures]

Nice ride!!!!

[@mirandayoung7882]

Well that looked fun hola lol

[@bigtater29]

Awesome!

[@mx500a4]

Nothing like the old All Terrain Cycle!

[@derpydog1008]

thats badass.

[@HardEnduro8]

damn that is awesome. very nice 👍👍👍

[@andremartinbike]

Thank you for the good feedback!!

[@wilfredheggart647]

@@andremartinbike your welcome

[@2000chevy4x4]

Yamaha or die! But, that is a sweet looking trike! That front LED light is a nice upgrade!!

[@petitecroissant8379]

Sick three wheeler. I have a 200es with 200m forks so mine is similar. And i also plan on doing similer mods. Did you just modify the frame and forks to lift it?

[@tomlenza2768]

Your a good rider

[@jasonwulff8341]

That thing is so bad ass.

[@hexentoterbandtx]

Nothing better than a 3 wheeler

[@johnyreb5464]

whish they would bring back three wheelers i miss my old 350x

[@bryanjjones4163]

johny reb you not by your self

[@JackG79]

Oh hell yeah me too I never had the 350X but I did have a couple of Big Red's and I also had a 185s those 185's were actually pretty quick little late ATCs.

[@Moonblade-gb6fc]

The probleme is that 3 wheele quad like that had problem of stability when you turn and the builder had problem because people where dying going too fast in the curve so they had to discontinue those type of atv

[@themadsmith857]

Mustached Ninja NiCe EnGLiSh M8

[@wilfredheggart647]

@@bryanjjones4163 yes i did bitch

[@stevebillow395]

did you have to rejet the carb for the snorkel

[@deadwinner1433]

thankfullycthe 200e has low range huh haha awesome. i wanna go wheelin now lol

[@wurrtrak9984]

wow this thing is awsome

[@michaelhorsford403]

My 83 200s runs excellent but the darn clutch is slipping I got the parts on order ... That lift is pretty sweet

[@adam31957]

Did you adjust it

[@terrywestbrook995]

I was doing all that back in 1982 and 83 with a yt175j Yamaha.

[@brandoncodling6804]

You still got that three wheeler man

[@andremartinbike]

Yessir, I will never sell it.

[@mikerisso2837]

400ex hubs? front too?

[@edge8024]

Where did you get a lift and mud tires I’m buying one and can’t wait 😁

[@deathmight7063]

im going the same route as you i just picked up a 1983 200e with a 200s enging. i seen where you put a 52 tooth sprocket on the rear. can you point me in the right direction on where i can get one.

[@duffman1241]

What kind of gear reduction do you use a larger rear sprocket?

[@tylerflanagan4716]

That is bad ass

[@Dee-mo3oj]

👌

[@POLARIS.INDY.ADDICT]

How hard was it to do?

[@71druss]

Cool

[@laconsentidavlogs9464]

Those highly lifter tires😂😂

[@randymagnum6680]

Sweet ride, and a damn gorgeous backdrop, where abouts is this?

[@andremartinbike]

Thanks! Im in NB canada.

[@tomlenza2768]

Did whistling diesel buy this recently?

[@Lvl4_Gun_Nut]

Where did you buy the parts to lift it? I can't find anything

[@NeilLB7]

Man how I wished I could have listened to that ATC burn thru the mud without the techno beat blaring in my ears making them bleed. I couldn't take more than 30 seconds. But looked neat from what I saw.

[@andremartinbike]

NeilLB7 sorry lol impossible to please everyone

[@endurotruckererniedesjardins]

I've had many trikes. Trikes do really well with shitty stock tires . I'm sure with 30s that old big red would out do my sportsman 1000xp on 30 inch monster mayhams. Very cool toy sir

[@andremartinbike]

Ernie Desjardins Only got it stuck once, thanks!

[@letsgoBrandon4200]

I got a 185's and I'm trying to figure out what Wheels I can CrossFit with it

[@stevenvanheel3932]

I have a 1983 tri moto 175 and a 1985 atc250sx. I got both of them for free, although I have many hours and many dollars put into making them run. Sadly, the tri moto may be on its last legs because the bottom end of the engine is going out and the top needs another bore job, but I cannot see putting the money into it. I will ride that thing until the day it grenades, and then maybe I will swap an 8hp Tecumseh into it.

[@TheScarySquares]

Did you change the gearing?

[@dwreckbaker6382]

I miss mine now thanks

[@fish_R_stinky69]

Omg😍😍

[@andrewadams6468]

Hi how did you lift the front

[@jessewoody5772]

Sweet. Did you lower the gearing at all? It seems to have plenty of grunt. After my initial reply I did see that you put a bigger sprocket on. Nice job

[@andremartinbike]

Yes, the rear sprocket from 47T to 54T in this video. Now have a 64T rear. Thanks.

[@steveng.willis618]

Old but tough!

[@motorsportsforidiots6599]

How did you lift it

[@connorhubbard6439]

can u make a build vid that lists all the things different then stock

[@joymc]

I’m gonna do the same thing but I’m gonna swap it with a cr500 motor

[@tmager2545]

How did you fit up the bigger wheels? Did you use spacers as adapters or did you have to replace the hub altogether? I have an 83 200e and building it like yours any info on your wheel/tire setup would be great!

[@andremartinbike]

That's right, spacers as adaptors to the can am bolt pattern.

[@tmager2545]

@@andremartinbike thanks for the info!

[@rosswalker9890]

How did u lift it

[@moparpower440]

I still got my three wheeler I so want to do this fuckin awesome iam pretty amazed what that can go through...... The stock tires I run suck so bad I thought this is the best its gunna get after I seen this makes me wanna get the same tires lol......where did u get a lift for it or did you make it ???

[@motoaj832]

what pro tapper bars are those.

[@BB-hi5of]

Possible to get some pics of the wheel spacers and brake set up? Thanks

[@andremartinbike]

I am going to make a video of how I made the brake set up soon. Its a can am wheel spacer with the 4x150 drilled into it.

[@BB-hi5of]

@@andremartinbike Oh nice and simple, I know i have many questions cause im trying to set my bike up like yours.

[@amycotter5026]

nice wheele

[@atcoutlaw9859]

Long live the atc

[@aus2839]

What size model and make