Android 10 Update PX5 | PX6 | PX30 Modinstaller Pro (ENG)

[@elessare111]

Great video with very detailed instructions! Thanks a lot!

[@nscalibra]

I just switched to Android 10 using this app, it works perfectly, very easy to use.

[@jacobstephenson4234]

Thanks for this tutorial Alex. Was trying to get this update for a week or so but your advice made it quick and simple. Donating now!! lol

[@AlexSAndroidRadio]

You're welcome

[@AlexSAndroidRadio]

Thanks for your donation ❤️

[@juanbatimovilzamudio1976]

Thanks you a lot, I followed the instructions and everything OK and I did the upgrade of my PX5 car radio since android 8 to android 10.

[@michaelhuijsman3489]

Thank you Alex. My headunit Xtrons PX30 updated flawlessly from A9 to A10

[@stefanoveldorale7397]

After a month can you tell me if everything is OK or the headunit is slowest? Thanks

[@vroomidis13]

I update my max 6 with android 10 today . All very well with this app and the update works like a charm. Thanks the author!

[@chuckd1802]

So I can go from Android 9 to Android 10 on my dasitia radio?

[@AlexSAndroidRadio]

Yes

[@chuckd1802]

Alex's Android Radio is there a update you can give for max 6

[@AlexSAndroidRadio]

You can use every firmware. Only for MCU you have to use the same as your device come with.

[@JoseLuisll]

Hello, I followed all the steps but it stays on the screen with white letters at minute 6:20 of your video, right where it says: "- wiping data ... formatting data ... " There it hangs and is like this for an hour please help me !!!!!!!!!!

[@AlexSAndroidRadio]

Try to reboot and wipe again.

[@giuseppet.9762]

HELLO. You in the video have MCU MTCE_HA. (0:26 seconds) I don't understand why the android distribution you get is HCT and not HA (minute 4:59). In mine, for MCU I have to respect GS as an update, but then as a distribution I can take which one I prefer (HCT7) ??

[@AlexSAndroidRadio]

Correct. For MCU you always have to use MTCE GS. For the main Android you can use every version you want.

[@giuseppet.9762]

@@AlexSAndroidRadio thank you so much

[@giuseppet.9762]

@@AlexSAndroidRadio Hi, forgive me the trouble .. I tried hct7 or hct 4 as update.zip but I get the error "update package verification took result 1 signature verification failed error 21" Could it be because my system is GS and not HCT? I got update.zip from your video page

[@AlexSAndroidRadio]

Which version is your Recovery?

[@giuseppet.9762]

@@AlexSAndroidRadio RECOVERY BY HCT V10.3.0 installed by modinstaller

[@nitinhonda1533]

Yes on the HCT launcher the home screen cant be changed. However, I m using the GS Launcher with HCT widgets from Hal9k_Mod_4.0 and yes I am able to change everything on the homescreen. So its just the launcher that is restricting not the firmware.

[@AlexSAndroidRadio]

Hey, yes of course its a restriction from Launcher, not firmware.

[@zodiac642]

Hey Alex! Thanks for your answer the last time. I bought a new radio and everything is working right! The back up camera is working and i dont have anymore problems with the music app. But I have one problem. When the car is off for a couple of hours the radio dont remember the radio channels, time and the music. Everything i need to select the usb flash drive to play music. When i have the car off for a hour and restart it agian. It not a problem and remember everything. What is de problem?

[@AlexSAndroidRadio]

Hi, which device? Which MCU?

[@zodiac642]

@@AlexSAndroidRadio its a android px6 headunit with the mcu: MCTE_MX_V3.71_1

[@RichardMar]

Wieder mal ein Mega Video!!! Vielen Dank und die paar Euro für den ModInstaller Pro lohnen sich extrem! Mach weiter so

[@dd-jo2wg]

Am stuck at 7:40 it says can't be executed mod installar pro was denied. What can I do?

[@AlexSAndroidRadio]

Make a factory reset and repeat the process.

[@linaskacerauskas4951]

Hi Alex, I wanted to ask if you have advice. I have upgraded my px5 unit to Android 10 and Hal9k. Some weeks later my headunt started rebooting almost every time you remove the ignition key and leave car for couple hours. Why it is not going to sleep, but rather rebooting? Head unit is connected via addapter using original radio harness on Passat b6. On my previous Android 8 & 9 and Hal9k versions this headunit was allways going into sleep mode after ignition key removed. Thank you in advance for reply.

[@AlexSAndroidRadio]

Hi, how old is your car battery?

[@linaskacerauskas4951]

@@AlexSAndroidRadio battery was replaced recenltly, ca. 3 month ago

[@AlexSAndroidRadio]

@@linaskacerauskas4951 hmmm ok. You could try to disconnect the HU for a few minutes You could try to reinstall the firmware, maybe there's something wrong? Which time do you set in Settings - Car - extra settings - ACC Timeout?

[@daulysgallardo1529]

Hello Friend, your video is very good. Please I have a tesla type android kit mounted on Renault Talisman 2018. The screen was black, now as it does not turn on, I do not know which is the exact model or the corresponding files that I should download. Might you help me? Can you tell me where I could send you the photos of the team. Thank you

[@thangavelrangasamy4083]

Hi, I have an issue. Max 10 apple car play headunit, after connecting apple play, no internet connection in iPhone 7. I can't connect navigation!! Please help

[@AlexSAndroidRadio]

🤷‍♂️🤷‍♂️🤷‍♂️ I don't have an IPhone.

[@ltx5482]

Hey, welches Radio würdest du für mein Golf 7 empfehlen? Habe kein DAB+, kein Navi und keine Rückfahrkamera.( Nur Lenkradtasten). Besitze ein Android Handy :)

[@AlexSAndroidRadio]

Hey, genau das, was du zu Beginn siehst, gibt es auch für den Golf 7. Wäre das was? Hab bei Instagram dazu Bilder reingestellt.

[@ltx5482]

@@AlexSAndroidRadio Würde auch sehr gerne DAB+ benutzen, würde das auch funktionieren? Wo finde ich eine passende Blende dazu?

[@ltx5482]

Könntest du mir ein Link zu dem Radio schicken bzw. wie heißt du auf Instagram?

[@AlexSAndroidRadio]

@@ltx5482 DAB kann man durch einen Stick nachrüsten. Für die Antenne kann man den Impedanzwandler von Alpine im Kofferraum tauschen, dann brauch man keine Scheibenklebeantenne und hat einen guten DAB Empfang. a.aliexpress.com/_BP5Hmz Das ist das Radio. Die Blende ist dabei. Du musst nur die richtige Farbe auswählen. Es gibt auch einen kleinen Gutscheincode. VW0505 Instagram ist unter jedem Video verlinkt. Gruß Alex

[@ltx5482]

@@AlexSAndroidRadio Ist das schwierig mit dem Alpine Wandler? Hast du eine Anleitung dazu :)

[@ga83]

My Unit is saying RL8Ac_CSP_A037 -BNR CY V535-20. I can not really find the right upgrade files. What do I need to pick?

[@AlexSAndroidRadio]

Your device isn't compatible.

[@edgaralles3468]

Ich habe ein Dasaita mit Android 10, PX6, MTCE_HA_V3.57_1, WQ_RF210. Der 'OBDLink LX Bluetooth' Adapter verbindet sich nicht per BT mit dem Radio. Als verfügbares Gerät wird er angezeigt. BT-Verbindung Adapter mit Handy klappt gut, auch Radio mit Handy funktioniert. Wo könnte die Ursache liegen, dass Adapter mit Radio nicht geht? Hal9k ist noch nicht auf dem Radio. Vielen Dank!

[@AlexSAndroidRadio]

Hey Servus, schwierige Frage. Habe selbst keinen solchen Adapter. Im XDA hat jemand geschrieben, dass man das Passwort auf 0000 ändern soll. Kannst du das mal probieren? Gruß Alex

[@AlexSAndroidRadio]

Hier beispielsweise jemand geschrieben, dass es bei ihm mit Hal9k Mod 4 funktioniert. forum.xda-developers.com/showpost.php?p=82556101&postcount=1307

[@edgaralles3468]

@@AlexSAndroidRadio Danke für die schnelle Antwort. Ich weiß leider nicht, an welcher Stelle das Passwort zu ändern wäre. Ich habe keine passwortabfrage gesehen.

[@AlexSAndroidRadio]

@@edgaralles3468 In der Bluetooth App kann man das Passwort ändern.

[@alvarohernandez2764]

the version that came in the unit is newer than the latest version in the website. But it is not stable. I wonder if i should still step down to that latest version. why would my current version not be there?

[@AlexSAndroidRadio]

Maybe your version is from factory. You can ask your seller for a new version and share here with the community and me.

[@zodiac642]

Hey Alex! I saw your video’s on youtube about the android radio’s. I have a couple of questions. I bought a android 10 radio for my car. The first day the radio worked fine. The second day the radio crashed and i must reset the radio. I have a 2 problems i cant find a solution for the problems. The first problem is: when i shift gears. The radio detect when its in reverse the radio automatically put it in back up camera mode. When you put it out of reverse it turns normal. I have installed a back up camera AHD1080p. Didnt work. So i cut the wire and it works on CVBS720p. But now when i put it in reverse the radio get black. When i put it in other gears it shift in to back up camera mode. When i disconnect the trigger wire from the radio in the gear reverse works normal. Other gears it stays in back up mode. I tried everything reset hard reset. I have android 10 new version and my mcu is: MTCE_MX_v3.60_1 a update from 9 augst. 2020.When im putting music from the usb. First couple of seconds the radio gets quieter and the back to normal volume. After 30 seconds the radio crash and i need to soft reset it. Everytime i need to choose my usb to play music from. The radio dont do it automatically. It drive me crazy. I tried everything. The seller doenst help me. I put alot of money for the radio. I cant use it like i want to. Please help me! I also bought a dab+ antenne installed the apk and it doesn’t work also. Can anybody please help me. I tried everything.

[@AlexSAndroidRadio]

Hey, sounds like a defect Canbus Decoder. Try to format your flash drive in Fat32 or Ntfs. Try another USB flash drive.

[@hamblett19489]

Hi Alex! I have PX5 Android 9 on my Peugeot 407. (MTCE MX HCT2) ( specific external design for 407) I want to update to Android 10. My device have a "Hibernation mode" (Boot in less of 2 seconds when I'm back to the car) Also some specific display info for climate, steering buttons, etc I will have it if I update to Android 10?

[@AlexSAndroidRadio]

Yes, the features will stay. The design will be a bit different maybe, like I showed up in this video.

[@hamblett19489]

Thank you for the answer, I will try it

[@hamblett19489]

@@AlexSAndroidRadio I complete the update to Android 10, everything works, system apps still working (canbus, vehicle settings, etc). Also I root it with XDA forum info. Thank you!

[@AlexSAndroidRadio]

@@hamblett19489 glad to help 👍

[@luiscorreia4926]

Hey , my PX30 is very slow, can't even use the navigation (waze or google maps) how to get my unit faster? I did buy the Modinstaller Pro but using it helps?

[@AlexSAndroidRadio]

Which Android Version does your device have installed?

[@luiscorreia4926]

@@AlexSAndroidRadio Android 8.1

[@AlexSAndroidRadio]

@@luiscorreia4926 then a upgrade should have a positive effect on the speed. Otherwise you can also upgrade your Coreboard to a PX5 4/32 or better a PX6 4/64

[@luiscorreia4926]

before anything i make sure my BT was SD 968. installed Android 9 with mod v4 hal9 But lost my Bluetooth.. Cant connect, do your know why?

[@AlexSAndroidRadio]

There is a Workaround. SD968 Bluetooth Modul forum.xda-developers.com/showpost.php?p=81555655&postcount=357

[@giuseppet.9762]

Hi, has it ever happened to you with Android 10 and PX5 that if you leave the car off for 2-3 days (Saturday / Sunday for example), and consequently the radio, when you turn it on you find it in recovery by itself? Then doing a "system reboot" starts without problems and is perfect for the whole week?

[@AlexSAndroidRadio]

No, never happened to me. Maybe to someone other? @Community?

[@giuseppet.9762]

@@AlexSAndroidRadio let's see if I find something ..

[@Kroks]

Hi Alex. I am looking for a solution to my problem, I found your channel. Maybe something will come to your mind. I have a PX5 on A10. Bought and installed 3 weeks ago. From then on, I have a lot of problems with him. The problem is applications that won't work. They try to start up, but after a moment's thought, they stop working. Only a factory reset helps, after which the problem returns after a week. They are different applications. From maps, through google chrome, through CPU-Z What can I do wrong?

[@AlexSAndroidRadio]

Deinstall the updates for Google Webview and Google Chrome. Also deactivate the automatic updates for this two apps.

[@Huguette_de_la_Roulière]

Hi @alex, I want to upgrade my android 10 to the android 11 version on a PX6. The actual system is the MTCH_MX_3.80_1, but i can't "visibly" do that with the mod installer pro 2 (only android 9 to 10, and it's not free at all). I saw people which use FactoryTool-1.72.7-1.7 to do that, but the youtube video has disapear since :(. What do you suggest about ? Should download the rockship HA3_rk3399_11.0_ota(20220601) and the MCU MTCH_MX_V3.84, or just the rockship is enough? i don't understand the difference. Sorry my my level in english is pretty bad to follow your instruction. I have also an another problem; because i have a Peugeot 407 with an option proposed by peugeot at the time; "JBL sound system", and the PX6 don't recognize this system, and the amplificater, so the sound was pretty bad. I lost the radar parking assistance too. Is it the canbus systeme which is not adaptable. Sorry for my english, and t'll be very glad if you can help me :)

[@claytonjr323]

Hi saw a few of your videos and I’m hoping that you can help me. I have a PX30(1024x600) MTCE_CHS_V3.57_1, I did a factory reset and now the unit won’t show any video I don’t know what to do

[@AlexSAndroidRadio]

Hi, go to Settings - Car - drive settings - allow video while driving

[@uscrob]

My FAT32 formatted USB or MicroSD cards are not being read for the MCU update. Anyone else have this issue? I have tried varios sized MicroSD cards, USB thumb drives and rebooted to recovery menu with no luck. Weirdly some times the music player launches when i connect the USB even though the only item on the card is the mcu .img file. Any help would be appreciated.

[@coreyspitzer2811]

How did you buy the modinstaller?

[@uscrob]

@@coreyspitzer2811 don't recall...i've had it for years. Why does that matter? I'm following the instructions per video...thanks for the response...but now i'm confused lol

[@coreyspitzer2811]

@@uscrob im trying to purchase it, i think hes from russia and because of the war im not able to. no clue

[@AlexSAndroidRadio]

Yes that's the current problem to purchase the Modinstaller Pro.

[@uscrob]

@@AlexSAndroidRadio Did you see my issue? Not sure if you're saying that my PX5 is not updateable because i don't have the purchased version? So the USB not recognizing the mcu.img file is due to no having a mod installer?

[@rc6696]

Nobre, tô com uma central dessa que travou na logo do Android fica em loop infinito e não inicializa, já apertei no botão de reset, já fiz tudo que era possível e nada. Já baixei um arquivo pra por em SD card, pendriver e nada. Poderia me.ajudar ?

[@53Talib]

Thanks for the video. You are very good. I have a car radio android 8. This one is MTCE-XRC_V279K_1 Jan 30 2018 09:32:47 . 8 core 64-bit CPU Coretex-A53@1.5G. Can you help me? to update this. I tried many different updates, but it doesn't work.

[@Kaholis]

Hello need help. I've got a AVIN multimedia. And it reboots. And stops on navigation logo. Then it starts fully makes error that stops on Google play store stops, system stops... I dont getit what is going on with this navigation...

[@AlexSAndroidRadio]

Hey, ask Avin for an Update. Copy update.zip on a Fat32 formatted usb drive and connect to the HU. A message will appear. Choose Wipe data and format flash.

[@johnkandanoleon]

Hi Alex!! i have side park sensors but i can see only the front-rear signal...is there a solution?

[@rdws.d8]

I have a problem, my jetta is MK6 2016 SPORTLINE, mqb, I bought the isudar px30, with the mqb cable, I connected everything, but the usb of my car does not work .. what is the problem-?

[@AlexSAndroidRadio]

I have already heard a few times about this cable not working. It used to be included in many sets. Now it is no longer included because it probably doesn't work.

[@kduramos]

Hi I have a Android Head Unit And the MCU is M32L0 so do you know or do you have any upgrade firmware for that? Or do you know if i cant put another one on it? Thanks

[@tornadostornados9363]

Hi Alex, after upgrade from A9 to A10 with Hal9K Mod5 it doesn´t recognize my TPMS usb receiver to the radio ISUDAR. Now...the radio insn´t to able saw TPMS device after connect to USB. Do you know where is the problem? Thanks for your response

[@AlexSAndroidRadio]

Hey, you can try to activate Tpms in Settings - Car - factory settings - TPMS

[@Basketregj]

1. Ηi, can you send the Link of the user Manual of the Above PX30 with androind 10 and 2 GB of RAM ? 2. Ιt is safe to put a Tempered Glass Screen Protector or is better to clean it with a microfiber towel ? 3. Can i use both First the Tempered Glass Screen Protector and after the towel for cleaning ? 4. I will be grateful for any suggestion for a good use of longevity on my screen !

[@AlexSAndroidRadio]

Hi, i don't have a manual. This is a PX6 device. My newer device already had glas on it. You must consider the following, you don't wear a head unit in your pocket like a smartphone. If you use the touch screen the normal way without nails it don't will scratch. Of course you can apply screen protector.

[@PavleLucic]

Hey great video. Any advice on external microphone? I upgraded car with PX30 and people cannot hear me well when I am using external microphone?

[@AlexSAndroidRadio]

I use the internal one.

[@Daniel_WW]

Alex, do you think that Modinstaller pro method will solve issue what I had on OTG method? " error during firmware downlaoding: "device did not support directLBA to write gpt"

[@AlexSAndroidRadio]

I think so.

[@basilkurt5003]

Thanks for the quick reply, I will wait as well.

[@CUDown40]

Hey, So I've tried to do the update to my Model Android PX30(1024x600) MCU version MTCE_MX_V2.94_1 with Android 8.1 version to the Android 10 I got from the set. I don't know if I'm doing it in order. I try to follow the video be it's to fast for me. I get an error 10 code every time I try. Being that everything I see on the video is written in a different language from English. It's really hard for me to follow closely. Do you have any step-by-step way of doing this? The videos are great. But I can't read Deu/Ger from the screen. Your words are in English. But I need the video to show in English to. Can you help me please? I'm so lost...

[@AlexSAndroidRadio]

Hey, it's not that difficult. What's your problem?

[@CUDown40]

@@AlexSAndroidRadio When I try and upload it the my Radio. I keep getting an error 10. What do this mean?

[@AlexSAndroidRadio]

Try another, more faster usb flash drive.

[@barrywalls5666]

I have a Android 9 - PX6 64gb/4gb ram. Its a RK3399 but as its a Volvo android headunit the MCU ver is DH200729T512188X611200923. I am guessing the MCU compatibility is vital to this firmware working. I am struggling to find any info on MCU starting DH. Would flashing with this firmware 'brick' the headunit if the MCU isnt as it should be? Thanks in advance for answering.

[@AlexSAndroidRadio]

Never heard about such an MCU. I wouldn't risk it.

[@barrywalls5666]

@@AlexSAndroidRadio Cheers anyway. I suspected as much it seems the Volvo MCU is very limited although the software and the device use BMW factory settings and launcher. Looks like my search continues. lol

[@superfill75]

hi, i have model MODEL PX5 ANDROID 9 versione MCU MTCE GS V3.44_1 CPU octa-core cortex-A53 @ 1.5 BUILD RK3368 can you tell me which software i can download? Thank you very much

[@AlexSAndroidRadio]

For MCU you always have to use MTCE GS. For the main android firmware you can use every version.

[@superfill75]

@@AlexSAndroidRadio OK, thanks a lot. I also installed the firmware, but I have a problem with the Google account I log in and everything but it won't update my apps? What could be the problem? thank you

[@AlexSAndroidRadio]

Most likely there's a problem with Google Webview and Google Chrome. Uninstall the updates for these two apps. Also deactivate the automatic updates for these two apps.

[@superfill75]

@@AlexSAndroidRadio prima li usavo ed effettuavo regolarmente gli aggiornamenti app usavo molto anche google map 😞non posso ripristinare tutto come prima?

[@TheShearman]

@Alex... Still no way to watch Hulu, even with the update and the APK for Netflix isn't all that great. Just wondering if this is going to be addressed or are we just going to have to deal with it. If this is the case... I'm wondering if it's really worth the $10+ cost to update it.

[@kamwichaka8797]

Hi. Subwoofer seems to be mulfunctioning since the update to Android 10. Subwoofer plays briefly then stops.

[@AlexSAndroidRadio]

Hi, did you update the MCU too?

[@ScootieXP]

Thanks for your video. I'm thinking of buying an Xtons 1din D710P or D715P but since customer support is almost zero I almost lost fate. I might buy one after all.

[@chuckd1802]

Hello which download should I use for Dasitia px6 .thank you

[@AlexSAndroidRadio]

For firmware you can take every firmware. For MCU you always have to use MTCE HA.

[@CarbonNeutral]

When you show “MCU Update” it notifies you that there is no MCU file on your video. This is the same issue I’m getting even with the dmcu.img on the [accessible] root of either the SD card or the built-in storage. Pretty frustrating…

[@AlexSAndroidRadio]

Hi, try another MicroSD or better usb flash drive.

[@addix2548]

What is the advantage of updating the MCU? I am on MTCE_CHS_V3.40_1 at the moment, are there any benefits of going to version 3.57?

[@AlexSAndroidRadio]

You rarely notice any difference. Mostly small bugs are fixed, which are controlled by the MCU. For example the Bluetooth module. But also functions are added. If 3.40 works fine, stay on 3.40.

[@albgili6697]

How to perform the update process to latest android 6?Should i do from the main system udate or through recovery?

[@AlexSAndroidRadio]

You can use both methods. Check box for wipe data and format flash.

[@MrTherandomvidsguy]

Got my headunit installed and ready to install the Hal9K mod and the screen didn't even work. Had to take it back and a replacement is coming today. But won't be able to get it installed till Friday :(

[@AlexSAndroidRadio]

I feel your pain. Everything will be fine.

[@AlejandroGonzalez-pw1zj]

just install your system in my autostereo...my question is, how do you activate your gps widget...like the one that appears in the video...greetings...

[@AlexSAndroidRadio]

This isn't a widget, this is only a picture 🤷🤷

[@AlejandroGonzalez-pw1zj]

@@AlexSAndroidRadio ok, your system works very well .... many congratulations ...

[@coreyspitzer2811]

I cannot figure a way to pay for the modinstaller

[@dampy78]

Hi, I have a VW Golf MK4, what head unit would you recommend?

[@AlexSAndroidRadio]

Hi Jamie, should be the same device as for Polo 9n or Passat B5. Where do come from and where do you want to place your order? Ebay? Amazon? Aliexpress?

[@dampy78]

@@AlexSAndroidRadio Im from the UK, Amazon but i'm not fussy this was what i was looking at but im happy to see what you recommend. www.amazon.co.uk/gp/product/B0882QH475/ref=ox_sc_act_title_1?smid=A16Y22SDNMVJR6&psc=1

[@AlexSAndroidRadio]

Hmmm i can't see if it's a Mtce device. This one is a PX6 MTCE a.aliexpress.com/_BPXkJ3

[@technomad900]

The HCT7 PX5 link in description leads to an update.img file , this is not usable by the recovery menu shown . How do we use the update.img files for flashing?

[@AlexSAndroidRadio]

Oh yeah, have to remove the link. Img is flashable via MicroSD or OTG.

[@technomad900]

@@AlexSAndroidRadio so I can use this guide with the IMG file, but has to be on micro SD?

[@AlexSAndroidRadio]

No, this one kzbin.info/www/bejne/gIHGdZejnMaSnMU or this one kzbin.info/www/bejne/epi1d2eNiNhliZI

[@petra9919]

Hi. Im curently on Malysk rom android 8. Can you tell me if i have to go to stock Android 8 before updating to android 10 with Modinstaller pro. If i do have to get stock how do i get back to stock from malysk. Thank you for the answer and very well made tutorials.

[@AlexSAndroidRadio]

Hi, no, you don't need to install stock firmware before using Modinstaller Pro.

[@petra9919]

Can you tell me one more thing. Whid mode installer pro you upgrade for android 8 to 10 just buj using the OTG update.zip file. Is the .img file not necesary with modinstaller pro? TNX

[@AlexSAndroidRadio]

@@petra9919 No, for Modinstaller Pro Img is not necessary.

[@eduardodominguez9056]

Alex, nice video, I have the ac8227l with MCU CVD1810-wj, where I can find a newest firmware?

[@AlexSAndroidRadio]

Hi, sorry, I can't help you with this device.

[@premcarandroid7819]

Hello Alex, when I start my car CarPlay starts. Then I go and switch in the radio and come back to CarPlay. The radio then stops and Amazon Music (which was playing earlier) starts playing again. I repeat it but after pausing Amazon Music but it’s impossible to listen to radio. I’ve a PX6 with Hal9k Android 9 mod. This was not the case few days ago. This just started. Nothing has changed. How to solve this? Thank you for your great work.

[@AlexSAndroidRadio]

Hey, try a restart.

[@premcarandroid7819]

Alex's Android Radio Alex, I did restarts several times in last 3 days. The issue is inconsistent. Sometimes radio plays and sometimes it does not. So I can’t figure out what the problem is.

[@AlexSAndroidRadio]

Hmmm... i have no idea 😕

[@premcarandroid7819]

Alex's Android Radio Yeah, me neither. Nothing has changed. Only this inconsistent behavior has started. Also, I’ve noticed that CarPlay restarts in its own but the radio which was running prior to system shutdown does not restart upon system restart.

[@premcarandroid7819]

Alex's Android Radio Sorry about that. Can you please point me to the correct video to install Android 10 with USB drive? Because the head unit is fixed, so I don’t have access to the SF card slot. Thanks Alex!!

[@jr9548]

Hallo Alex! Kannst du mir sagen, was das beste Android Radio von M.I.C ist (ich habe im Moment das AV8V5) Viele Grüße Jan

[@AlexSAndroidRadio]

Das neuste ist das AV8V6.

[@jr9548]

@@AlexSAndroidRadio Ja das weiß ich aber ist es auch gut bzw. das beste? Welches benutzt du und wie zufrieden bist du?

[@AlexSAndroidRadio]

@@jr9548 Es ist halt der Nachfolger vom AV8V5. Vorteile sind der doppelte interne Speicher, Android 10 mit Tag und Nacht Modus, DSP. Das sind so die Unterschiede. Ich habe das AV8V6 zum testen da und mache auch ein Video dazu. Ich nutze hauptsächlich ein anderes und zwar das, was man zu Beginn in diesem Video sieht. Ich bin sehr zufrieden.

[@cristisava2550]

Hello! I have updated my PX5 from android 9 to 10. Android 10 provided by the seller ISUDAR. After install, shut down and open again, I have some problem with connection to a wifi network. I connect to wifi in the first time and everything works fine. After shut down and open, It shows me that the wifinetwork is saved but could not connect to it. And instead the wifi connection logo appears something like this „ ” It works to download apps from google play, but on the youtube song can play only to the middle of the song. Any song! It looks like there is some connection to the network. But Chrome, for example, try to open but it close instant. Can someone help me? Thanks!

[@selimgurul3222]

First of all, I apologize for my bad English. I have an android based multimedia device whose model I don't know. Version 10.0. I really like the interface in the video and can I just follow the steps in the video to do it like this? Does it happen on every device? If it does, will the reversing camera and radio be broken? thanks

[@AlexSAndroidRadio]

Your MCU should start with MTCE.

[@selimgurul3222]

@@AlexSAndroidRadio thanks

[@roblowe76]

I have px5 keeps resetting n crashing just wondering if this might fix as retailer keeps telling me to upgrade firmware

[@AlexSAndroidRadio]

I don't know, try it.

[@ldonizetti]

alex after installation the easy connection stopped working .. can you help me ???

[@larkinsen]

Great video.Can you tell me please how exactly did you connect the power supply adaptor at home to the media nav?Thank you

[@AlexSAndroidRadio]

kzbin.info/www/bejne/qKPGpXWumNuCqKM

[@thefunkygibbon]

Great video. I assume i can use the same procedure to downgrade from 10 (which my unit came with) to 9? Could you possibly answer a few questions i have regarding this sort of thing as its new to me and seems to be rather different to the usual phone/tablet rom flashing that i'm used to. you mention in the video about HCT/CHS etc ROMs, what are they exactly? different roms made for different Head Units? do you think that v9 is better performance than 10? specifically hal9k v9 rom. i'm assuming that that would be much better than the stock v10 rom currently on my HU. I feel it is rather sluggish compared to mobile phones i've used over the past 5 years. I'm hoping it is because of a poorly optimised ROM.

[@AlexSAndroidRadio]

Hi Andrew, you can use this method also for downgrading. Different Roms made for Mtce Devices. All Mtce devices with the same processor have the same platform from HCT. Only for MCU you always have to use the extension that you device have. For example. Mtce Gs always have to use GS MCU's. Mtce Ha always have to use HA MCU's. But for firmware you can use a GS firmware for a HA device. Some people say A10 is better optimized, some say A9. Test it.

[@JB-NZ]

Bluetooth SD-BC6 on my PX6 unit, currently running HAL9K's Android 9 4.0.2, on my 10.1" Unit. Will it be compatible? You only state SD-968 is compatible. Thanks

[@AlexSAndroidRadio]

BC6 is compatible 👍

[@cemharris5109]

Hi ich hab ne frage und zwar bei mir steht keine mcu version auch in denn Einstellungen nicht? Wie kann ich die version rausfinden? Krakau du mir helfen?

[@AlexSAndroidRadio]

Welches Gerät ist es denn?

[@cemharris5109]

@@AlexSAndroidRadio #Aliexpress € 109,35 47%OFF | OKNAVI Android 9,0 Auto Radio Multimedia Video Player Navigation GPS Für Peugeot 508 2011 2018 Kopf Einheit Mit Rahmen Unterstützung SWC a.aliexpress.com/_B0WLVV

[@AlexSAndroidRadio]

Das Gerät ist leider nicht kompatibel.

[@DutchDetailer]

Hi Alex, I currently have a PX5 Android Head Unit with Android 8.0 that I want to upgrade to Android 10, so I can still run the latest apps etc. My currently MCU version is: MTCE_XRC2_V2.84_1 from May 2 2018. I'm buying ModInstaller Pro 2 from Hal9k. Can I upgrade to Android 10 with this setup?

[@AlexSAndroidRadio]

Yes, this is what the video is for.

[@DutchDetailer]

@@AlexSAndroidRadio Thanks for the quick reply! Do I have to update the MCU first? Or does it just work with ModInstaller Pro? My Bluetooth module is MD725, then Bluetooth will not work on newer Android OS?

[@AlexSAndroidRadio]

@@DutchDetailer as I shown in the video. Everything is explained. MD725 won't work with Android 10.

[@raulgumiel4823]

Mine is MTCE_TONE_ v3.06_1. What folder should I take in MCU for MTCD, MTCE, MTCP, Intel Sofia3g?

[@AlexSAndroidRadio]

Which device do you have?

[@ismailpasazade7253]

i have the isudar B59-BZ0907 version. cant find a firmware update for it. can you help me out with it?

[@AlexSAndroidRadio]

Could you send me a link for this device?

[@ismailpasazade7253]

@@AlexSAndroidRadio nl.aliexpress.com/item/32854788582.html?spm=a2g0s.9042311.0.0.94754c4dmsYUQ2

[@AlexSAndroidRadio]

There are two different devices. For this upgrade the MCU have to start with MTCE.

[@AdarshSegal]

Hi ! I have a MTCE Dasaita Max 6 4GB/64GB running HAL9K Mod v4.2 android 9 . I have successfully upgraded to stock Android 10 HTC7 ROM by following this video after purchasing mod installer pro 2 from HAL9K . Everything is working fine except for the wifi which refuses to turn on . I had upgraded the MCU to MTCE HA V3.67 from v3.45 before upgrading and did a factory reset . I have tried various other ROM's from the Rockchip PX6 android 10 folder on the Yandex link provided by you but the wifi is not switching on My bluetooth module is WQ_RF210 and it is working fine. Please help. Thanks

[@AlexSAndroidRadio]

Hey, try to disconnect the hu for ~1 hour.

[@AdarshSegal]

@@AlexSAndroidRadio Sorry not working . Any other suggestions ? Thanks

[@CH8MP]

I have the PX6 with A9 will this update work also. Also I'm have problems with unit. when ever I'm listening music apps like I heart Radio or tunein radio it randomly switches stations. Is there a solution to fix this?

[@AlexSAndroidRadio]

Your MCU should start with MTCE. Never heard about such an problem. Does this behavior also happens with other media apps?

[@CH8MP]

@@AlexSAndroidRadio yes

[@AlexSAndroidRadio]

@@CH8MP Maybe one or some of the keys on your device or steering wheel are causing the malfunction.

[@CH8MP]

@@AlexSAndroidRadio I have a PX6 radio from Phoenix Automotive with android 9 will your update for android 10 work.

[@AlexSAndroidRadio]

Does your MCU start with MTCE?

[@daiboy8076]

Hi Great Video - I am having problems with the downloading of my MCU udpate, keep getting do not proceed to site, then site is blocked, tried to download to yandex but cant seem to do this and the unzip it

[@AlexSAndroidRadio]

Which MCU do you need?

[@daiboy8076]

@@AlexSAndroidRadio Thanks for the reply MTCE_LM_v3.67d

[@AlexSAndroidRadio]

drive.google.com/file/d/1lDOnEgCb2RX1U2xEMKFE-cr-iLpxhf-m/view?usp=drivesdk

[@daiboy8076]

@@AlexSAndroidRadio Thank you worked Perfectly!

[@SYEDMA15]

Dear Alex, I want to know that if I upgrade my unit of android 8 to android 10 on a PX5 machine will I get the feature of AHD camera. Is AHD camera feature a Hardware feature or Software feature?.Waiting for your reply to upgrade.

[@AlexSAndroidRadio]

As far as I know AHD is only supported by PX6 Cpu.

[@SYEDMA15]

Thanks for your prompt response

[@pigwhizz]

Just a quick question dasaita said MAX6 (android 9) and MAX10 (android 10.0) both use PX6 chip, but you need to upgrade Android 9 to Android 10 by burning px6 chip, I'm just wondering what hardware method this is?

[@AlexSAndroidRadio]

There are two other ways to update the firmware. 1. Via MicroSD card 2. Via OTG cable Most of distributors/vendors (not reseller) have special devices, where they can mount 4 Coreboards at the same time and update them simultaneously.

[@alex_wfa]

Guys, how do I get back the standard background? :)) I've updated with HCT on Android 9, and played around with the wallpaper, didn't like it as it's mostly hidden anyway. But when I installed it, the background was white and went to black automatically in night mode. I want it back like that but can't find any options to do it, just solid wallpaper.

[@AlexSAndroidRadio]

Long press on screen > reset mode

[@alex_wfa]

@@AlexSAndroidRadio thank you!

[@Doai55]

Bluetooth not working after i update px5 to Android 10 can you help me please

[@AlexSAndroidRadio]

So you didn't watched the video?

[@Doai55]

@@AlexSAndroidRadio yes i didn't. I just watched it now and problem fixed. Thank you very much sir.

[@LolWinniee]

I am trying to update to the latest version of Android 8 first and mines is HF, however there is no file folder for HF.

[@AlexSAndroidRadio]

For MCU you always have to use MTCE HF, for the main android firmware you can use every version.

[@Doky1988]

Hello Alex! Just a question! Which ruin is more reliable? HCT4 or HCT7? PX5 Headunit

[@AlexSAndroidRadio]

The Homescreen in the Hct7 isn't adjustable, that's why HTC4.

[@reveal1989]

Hi. I was updating my radio auto, the original was on android 8.0 and updated to 10.0 so far so good ... then I wanted to update the mcu because it was at v2.80 and put the file on the sd card and clicked on mcu update. the radio restarted and a screen appeared like this: - a screen with chinese Letters - a red, a green and a blue bar - a Version PX5 V1.1 to get out I had to take the card out and press the reset button. now the screen goes black and nothing happens. but if you put the card in and press reset you will return to the screen with Chinese letters ... Please, help me...

[@AlexSAndroidRadio]

Hey, that's because you used your card to create the MicroSD card to update via RockChip create Update disk tool. Go into the tool, connect your MicroSD and choose restore. After that you can use the MicroSD normally again.

[@reveal1989]

@@AlexSAndroidRadio but with firmware file? I have 2 restore: 1 button and 1 mark, in Rockchip Tool.... If I have press restore, the SD Card is empty...

[@AlexSAndroidRadio]

On which way you want to upgrade? Modinstaller Pro or MicroSD Method?

[@reveal1989]

@@AlexSAndroidRadio modinstaller pro....

[@AlexSAndroidRadio]

@@reveal1989 Click on restore, copy update.zip on this card, start Modinstaller Pro, choose Android 10, click install. Follow my Modinstaller Pro Video.

[@mareka7]

Hi, found a way to unblock/rearrange widgets on a home screen of this launcher?

[@AlexSAndroidRadio]

Hi, sadly no. You can set the second page as the first one and add your own widgets.

[@tanveerkarbelkar]

Hi, I have recently got Android 10 Head unit (Versions MCU: JM5-00C3 and System Version: JCAC10030-OA-V.1.0.16B4-210107_0859) The head unit looks excellent but having following issues: 1. When the headunit is started again, the date/time is gets automatically changed. Tried setting up via network update and even manually. 2. Cant play music on bluetooth directly unless you select bluetooth app on the headunit and then you will head it. I was trying to update firmware via OTA update but unfortunately it doesnt do anything. Please advise if can update this firmware somehow or guide me where can i find installable android 10 version.

[@AlexSAndroidRadio]

I've never heard about such an device. Sorry.

[@nitinhonda1533]

Thanks...I did give it a try. Its really easy with the Mod Installer 2 and the HCT Rom is great. Just a query, I m not able to enable developer options tapping the build...any suggestions?

[@AlexSAndroidRadio]

👍😉 Go into settings - Car - factory settings and enter the password ADBON

[@nitinhonda1533]

@@AlexSAndroidRadio Thanks!!

[@kemicala]

@@AlexSAndroidRadio thank you sooo much. been trying to figure this out for days

[@stnemesis2377]

Alex, great video. I'm getting ready for the update in my PX5. Quick question. I would imagine that installing a separate car launcher like Agama Car launcher should work with this update right?

[@AlexSAndroidRadio]

Yes of course 👍

[@vroomidis13]

I have px6 with MCU MTCE_HA_V3.40_1 with Android 9.My Bluetooth is WQ_RF210 . Is it okay to update in mcu 3.45? After that to Android 10?

[@AlexSAndroidRadio]

3.40 is okay, no need to update 👍

[@vroomidis13]

Alex's Android Radio can I update to android 10?

[@AlexSAndroidRadio]

Yes you can 👍

[@vroomidis13]

Alex's Android Radio Thanks for the fast reply.

[@Kropokloender]

Hi. Sorry to have to reach out for this as i see it has been mentioned before, but i am unable to find the serial number on my PX30. I see you have mentioned HW Info, but i can't find the serial number on the app. However i see that you have also mentioned Hal9k rom, where can i find that software?

[@AlexSAndroidRadio]

Hey, which Firmware is currently installed on your device?

[@Kropokloender]

@@AlexSAndroidRadio I currently have android 9 installed and the latest MCU firmware.

[@AlexSAndroidRadio]

Which build number of firmware? Here you can find the Hal9k Rom. kzbin.info/www/bejne/jKO1nJqXZs2qgsU

[@Kropokloender]

@@AlexSAndroidRadio PX30 9 PQ2A. 190205.003 eng.hct.20190422.093444 MCU firmware is MTCE_MX_V3.30_1

[@AlexSAndroidRadio]

@@Kropokloender Here you can find some newer firmware versions. yadi.sk/d/umCvHqCDzHccr/RockChip%20PX30%20Android%209/HCT

[@tomaszkwak7274]

Hello, I unfortunatelly Installed file MTCE_HA_v3.10 instead of MTCD to upgrade! Anyone could share a file with MTCD_HA_v3.10? My unit doesn't work correctly and I would like to return for a previous version.Thank you!

[@AlexSAndroidRadio]

After ~v2,80 it automatically changed from MTCD to MTCE. Everything is alright. Install the newest MTCE HA.

[@tomaszkwak7274]

@@AlexSAndroidRadio i tryied to upgrade Android 10 for my PX5 unit (currently I Have A9). Do you have some good solution from USB/SD card?

[@AlexSAndroidRadio]

@@tomaszkwak7274 Look into my other videos. There are three different ways to do this.

[@tomaszkwak7274]

@@AlexSAndroidRadio Thank you. As I see I have BT module MD725 so at the moment I will no upgrade my android system. I have one additional question. Currently I have a problem with correct working a volume know and BT module. When I returned to MTCD_v3.40 the volume know doesn't work and BT Module exists but have no set up device name and password. If I sign a device name and password - other device can't find my radio by Bluetooth and radio also can't find other devices... I think probably I returned to bad version of MTCD which not handle a volume knobs and maybe not work with BT MD725. Bad news is I don't remember my first version of MTCD and also didn't take a screenshoot What do you think?? Thanks for very quick reply!

[@AlexSAndroidRadio]

@@tomaszkwak7274 What is your original Android version?

[@mk808android2]

Hi, Alex ! Great job, thanks for sharing ! Q : can I, using buyed Mod Installer Pro, to install clean Android 9 over the Hal9k Mod v4 ??? I have same issue and I want to try an unmodiffied version... How to avoid a brick ? BIG THANKS !

[@AlexSAndroidRadio]

Hi, you don't need Modinstaller Pro to install stock version if you already on the same android version. Just install update.zip with wipe.

[@mk808android2]

@@AlexSAndroidRadio Thanks for fast reply ! Now I have Mod v4 installed...So, just reboot to recovery and instal Androi9 fw ?

[@AlexSAndroidRadio]

@@mk808android2 jep with wipe data factory reset.

[@stefanipate5258]

I m stuck in logging in vivid account . I installed the android 10 but I can't enter in menu because I can't create an account . I can install now other android from recovery mode ?

[@AlexSAndroidRadio]

Yes you can. I don't like vivid.

[@stefanipate5258]

@@AlexSAndroidRadio I installed the LM version , icons looks a little bit wierd but is ok, app updated so untill now is ok , I wait for a more good looking android ,if you have any recomandation please tell me. Thanks for you help! And keep making helpful videos ! The best 👌

[@mrsweete9065]

I'm currently on Hal9k's Android 9 with the Bluetooth module WQ_BC6 I take it that module is okay with Android 10? Also, I requested CX's 3.44MCU Sound Patched but I'm thinking of downgrading to 3.44 in the link, is it okay to do straight over the soundpatched 3.44? Thanks.

[@AlexSAndroidRadio]

WQ BC6 works without any problems 👍 It is OK to downgrade to 3.40 MCU.

[@mrsweete9065]

@@AlexSAndroidRadio thanks for the quick reply, I'm waiting for Hal9k to send my APK over and I'll sign up for a 30 day amazon music trial :)

[@mrsweete9065]

@@AlexSAndroidRadio Your Amazon Music Affiliate link sends me to Amazon.de, is there a way to do it from Amazon UK?

[@AlexSAndroidRadio]

I have to find out how it works tomorrow. Thank you for your support 👍

[@danielsweet8311]

@@AlexSAndroidRadio I altered the URL and got this: www.amazon.co.uk/music/unlimited?tag=alexradio889-21 i've signed up for the free trial so let me know if it shows?

[@abdelrahmanelmasry5534]

Hi Alex, I successfully upgraded my PX5 unit to Android 10 throughpurchased Hal9k Mod which i purchased following to the explanation in the video.. I have couple of questions. 1- Mod installer is not setup in android 10, i can't find it in the installed apps .. Is that normal? 2- i installed HTC4 , How can i switch to HTC7.. Shall i download it again and setup it through Mod APK as i did with HTC 4.. Do you recommend? 3- what i understood that i can update any newer version through WIFI.. But when i click software update nothing happen

[@AlexSAndroidRadio]

1. Normal. The will be deleted during installation. 2. Install update.zip via USB 3. You misunderstood. Only for Hal9k Rom. This is a standard firmware.

[@Carlifeone]

hello. I have a px30 but app cannot be installed and does not run apk files and nothing happens when I click. I also opened the installation of unsynoured sources. When I look at the installer apk, it doesn't have access to memory. Android device is also ten hct. Thank you.. What can I do to install the app

[@AlexSAndroidRadio]

Hi, maybe you've disabled Apk installation in Settings - Car - factory settings (Pw 126 or 3368 or m123456) - other - Apk installation

[@Carlifeone]

@@AlexSAndroidRadio Thank you very much. The installation problem was solved with updates that you had left the link to. But the new problem has come to Jude. The problem is the reverse camera quality has been very diminished. Can it improve with mcu updates?

[@AlexSAndroidRadio]

@@Carlifeone you could try it.

[@lulukarabine]

Hello, i have a PX5 4Gb/64 Gb whith a lot of stability problem , the MCU version is MTCE_MX2_V3.45_1 . Is it the MTCE_MX2_V3.56.rar what i must download ? Thanks you !

[@AlexSAndroidRadio]

Yes, correct. On a MX or MX2 device you always have to use the same extension.

[@caterpillarbazzano]

I have two car with the same px5 and the same version... The first car all are fine but for second one all process finished successfully as Frist one but sometime the screen freeze and going black despite music continue playing. Of course I paid two mod installer APK with separate serial number.

[@AlexSAndroidRadio]

I would perform a wipe data and install the firmware again.

[@caterpillarbazzano]

@@AlexSAndroidRadio I tried to reset factory data and install three different rockchip px5 android 10 but it says update file not found

[@AlexSAndroidRadio]

Do you extract the file once? You need a file called Update.zip

[@caterpillarbazzano]

@@AlexSAndroidRadio yes

[@AlexSAndroidRadio]

@@caterpillarbazzano And if you connect the usb flash drive and go to Settings - System - System Update and choose format flash.

[@promoeaso]

Hi Alex, good afternoon, I have Modinstaller Pro to update my PX5_HLA to android 10, but I can't see the files on my pendrive, can I do it from an SD card? . I do not know very well why it happens to me because instead I have used the same pendrive to update the MCU and it detects it to me directly

[@AlexSAndroidRadio]

You can also use a SD card.

[@germplus]

Upgraded to android 10.thanks to your video but the wifi on my unit will not connect anymore. What could be the problem?

[@AlexSAndroidRadio]

Try to set up the SSID manually.

[@martinBG]

PX5 MCU MTCE_MX2_V3.17_1. Which file do I need to upgrade to Android 10? Thank you :)

[@AlexSAndroidRadio]

For MCU you always have to use MTCE MX or MX2, for main android firmware you can use every version.

[@martinBG]

@@AlexSAndroidRadio Thank you. Do you have the file that's needed?

[@AlexSAndroidRadio]

Sorry, did you even watched a second of this video?

[@martinBG]

@@AlexSAndroidRadio i did, but as I haven't done this before I'm not sure what to do. I've checked the folder too but I see PX5 Android 9. :)Now I'm gonna try to figure it out. When I upgrade, do I lose information and installed apps? I have a Control Settings app that let me enter the car's original display settings, so I don't wanna lose it. Thank you again.

[@AlexSAndroidRadio]

Everything related for your car will stay.

[@alexisvardikos2292]

Hey Alex My unit is a PX6 has MCU version MTCE_MX_V3.45_1 and at the Yandex Folder the last MCU is 3.30. I have to downgrade to 3.30?

[@AlexSAndroidRadio]

No, stay on your 3.45

[@basstek1]

Hello alex. Unfortunately, I have a problem again. Currently I have the newest mcu. I have the latest Android 9 from ota Hal9k. I have installed Modinstaller Pro2. Launched. Now I have a new recovery. Unfortunately, I can't upload android 10. An error appears. E: footer is wrong ...... Error 21. Please help.

[@AlexSAndroidRadio]

Download the update.zip again

[@Ciro421]

Good evening, I got your name, to update the Android car radio operating system of an Isudar Px 30 with Android 9.0 They told me that with a software you created you can update it to Android 10. Could you explain how it works?

[@AlexSAndroidRadio]

Why do you don't watching this video?

[@russ4972]

I have a xtrons px6 unit with android 10. Can I upgrade to android 11? Or what update is the best for me?

[@AlexSAndroidRadio]

Never touch a running system 🤷

[@andriebayuajie6503]

Is px30 good? Android Auto music streaming is sound poor in my px30 head unit.

[@AlexSAndroidRadio]

I don't like PX30. They are low in performance. A PX6 with is much faster and with a DSP the is also much better.