Android 10 Update PX5 | PX6 | PX30 OTG method (ENG)

[@ooFiReBuGoo]

This was a lot easier to follow than others cheers.

[@thereare2spoons]

Hi Alex, thank you for your guide. I have successfully upgraded my PX6 from Android 9 to Android 10 with this method. In my headunit, there are 3 USB ports, none of them are detected as "GPS" so upgrading with a USB drive will not work. They are detected as follows in File Manager: USB1 USB2 USB-A (working with OTG method) I prepared myself with a DIY USB-A to USB-A cable and followed your guide, and voila, unit was detected in PC right away and flashing through OTG went smooth.

[@XellosMetallium]

I soft bricked my PX6 MAX6 today when I was upgrading from AND9 to AND10 using FactoryTool (recommended by Dasaita) then my Windows crashed. I panicked when the android unit doesn’t show picture but it still getting signal from the USB. Cannot access Recovery Mode either. I pull the plug on the Android Unit for a complete reboot then RKDevTool was able to detect something. I flashed the firmware and it failed at 32%. The Unit seem to reboot into Recovery Mode. This time RKDevTool read "Found One Loader Device" unlike before it says something else. I flashed again and it successfully flashed AND10. Thanks Alex My unit have 3 USB; - 2x USB w/splitter are for data transfer. - 1x USB single extension is the OTG method, there was no "yellow cable" for me.

[@AlexSAndroidRadio]

Hi, I'm glad to help. You're welcome

[@slodkadarek1281]

Hello ... do you have maybe any updates to my px5 MCU CSN2_03202019_103040 CPU 64bit-8core cortex-a53 1.5GHz 4GB TC: 40C TG: 40C FO: 216M F1: 408M Android 8.0.0

[@ShubhamR4295]

Driver link does not work .. Also I can't find the ANDROID 10 img file for PX5 KSP

[@AlexSAndroidRadio]

For MCU you always have to use MTCE KSP. For main android firmware you can use every version. Driver dl.radxa.com/tools/windows/DriverAssitant_v5.0.zip

[@aleksandartachev601]

I did exactly how it is done on the video. Everything was the same, from start to finish. Same program, same IMG file etc. My unit is Dasaita PX6 HA with the latest dmcu MTCE_HA_3.78. My problem is that the GPS is now missing. It's nowhere in the drop-down menu to enable/disable it, there's no GPS Test plus icon etc. So what's going on, can you please advice? Its like it has not detected any gps device at all

[@khaledtuguz]

Hi Alex, first of all thank you for the video and how simple your instructions are :) My machine is PX5, I have a couple of questions if you can help; - When i connect the usb to the laptop it does not configure or beep (after installing the driver), should there be a hidden usb port like the yellow one? - Also the link for RKDevTool is broken, i had to download another version to try.. Thank you for your help

[@AlexSAndroidRadio]

Hi, as I said in the beginning of the video, this method does not work for every device. Some devices does support, some doesn't.

[@swoterLt]

@@AlexSAndroidRadio what about broken link?

[@AlexSAndroidRadio]

drive.google.com/file/d/1IEYQgrSxur61aMUNrOkVeHhw38s_WeIA/view?usp=drivesdk

[@dylanr.7235]

@@AlexSAndroidRadio do you have a new link to driver download?

[@AlexSAndroidRadio]

1drv.ms/u/s!Alb1EFlGVfVUgUjv3UB0UrXiiKVS

[@Stinktierchen]

I think almost none of the pre 2018 models support OTG on any of the USB ports... sadly.... I think only some and few new models do. At least mine doesnt support OTG on any USB port. I am actually annoyed that the chinese didnt think of a native OTG port for people to use in case a flash goes wrong. Its incredible that u can easly brick ur unit and then have to go the extra mile to recover it. Must be on purpose they didnt care to carefully implement OTG

[@auddawa4260]

I agreed with you, I've tried OTG for 2 days, with Windows 7(2 Notebooks've tried), 2 A-A usb cables, on my PX6's 3 usb ports!!. Finally gave up for OTG'method, have to do successfully with ModinstallerPro method .

[@Stinktierchen]

@@auddawa4260 Not even on a new PX6 model? Just .. WOW...

[@auddawa4260]

@@Stinktierchen Yes, but I'ven't tried on other Windows, Windows10 for instance, may be work,ha ha......

[@Stinktierchen]

@@auddawa4260 I dont think it will work on Windows 10. Rather the opposite. Windows 7 is still much better when it comes to stuff like that. If it doesnt work on Windows 7 it wont work anywhere.

[@auddawa4260]

@@Stinktierchen But Alex used Windows 10, the only alternative I'ven't tried, FYI.

Hi Funrover 2 Din Android Car Radio starts reset and reinstall. We re-enter the settings each time. This causes the problem. Toyota Corolla 2010 Model

[@spirosbardis5806]

Hello Alex. You are doing a great job and you are very helpful. Just a question. I have a vw golf mk5 and a px5 heaunit. I tried to wire in on bench at home so that i can make upgrades and check some apps because in my garage there is no Internet connection. The problem is that i connected earth, constant +12v and switched +12v and the unit does not power on. I have a thought it needs a canbus signal to open. How are you doing it on bench. I understand the unit you are showing comes from a vw. Many thanks!

[@AlexSAndroidRadio]

Hi, thanks 😊 I have a video about that topic (sadly in German) kzbin.info/www/bejne/qKPGpXWumNuCqKM I hope the video can help you.

[@spirosbardis5806]

Hello again. Luckily I understand a little bit of German. Unfortunately, that's the procedure that I have already done but the unit doesn't power on. I have connected ground on pin 12 and +12v on pins 15 and 16. On the second type of connector on your video. But is still not powering on.

[@AlexSAndroidRadio]

@@spirosbardis5806 maybe your device does have an separate cable for switched +/ACC?

[@AlexSAndroidRadio]

Something like that? drive.google.com/file/d/1Ig4IcMu94zDRlwNxVrvfQURJovQGXKes/view?usp=drivesdk

[@spirosbardis5806]

I don't know. My car has the old quadlock type connector. I checked my car side of the connector and it has constant +12v for both pin 15 and 16. Pin 12 is normally ground.

[@michaelo1230]

I have question did I need to connect my PC to the device in my car to update firmware? Why MCU can be flash by using usb, but firmware must be updated via PC?

[@meraguitars2995]

What about the STM32-20200103-11-KC6-33 mcu version with Android 10 ? Bought 10" PX6 RK3399 DSP car headunit at BOSION OFFICIAL STORE at ali. They have "ANDROID 10" text everywhere at item page... but by fact the device have Android 9. However it works well, besides it hot. Need to install the radiator. And I want Android 10. What to do to update ?

[@AlexSAndroidRadio]

Sadly Stm32 devices are completely different.

[@mightyowl8680]

I have the same device but Im also not sure how to upgrade it to Android 10. I contacted the shop and they told me they are able to upgrade it but there's not much difference between the two.

[@kostiVEVO]

Hi i have a problem with connecting my PX5 HU to PC. Recovery mode is on, when i plug it to PC it doesn't recognize it. I have treid different USB slots and even second laptop. Drivers from description are installed too.

[@AlexSAndroidRadio]

I don't know why, but it doesn't work on all devices. On my other Dasaita Mtce Ha test device it also doesn't work. The last possibility is to use Modinstaller Pro.

[@TheStiflergm]

Hello Alex! I have a Px6 HA, But there is no image files for HA, just zip files. Am I able to use the image file from the HCT folder like you did on the video? or am I not able to update with this method?

[@AlexSAndroidRadio]

For the MCU you always have to use MTCE HA, for the main android firmware you can use every version which is compatible with PX6.

[@TheStiflergm]

@@AlexSAndroidRadio Thanks, that was very helpful :)

[@Daniel_WW]

HI, Is there any solution for error during firmware downlaoding: "device did not support directLBA to write gpt" ?

[@josearodriguez2030]

Where did you copy the file at? I went on their website. It does not work. You can’t copy the file. You can’t even access the file. How did you do this? I already looked at the video too many times.

[@oldonesivi]

Hi Alex, very useful info. Probably the only one that can work. Can you please update driver link?

[@AlexSAndroidRadio]

Which links doesn't work?

[@oldonesivi]

​@@AlexSAndroidRadioHi Alex, driver was not working, but finally I was not able to find USB that works(none of the 3 existent), so turned to Modinstaller Pro . PS. I also found the drive in another link of yours :). Thank you for all your efforts!

[@AlexSAndroidRadio]

@@oldonesivi you're welcome

[@abdelrahmanelmasry5534]

Hi Alex, Thanks for your video and the outstanding effort. I have WQ-BC5 Bluetooth module equipped with my PX5 screen and shipped with 8.0 android (HTCE-KSP, V. 2.89) MCU. I need your advice for these inquiries : 1- Does it worth to upgrade from Android 8.0 to 9.0 or 10.0? 2- Is my device compatible with Android 10 ? 3- is it possible to only install the launcher HTC4 FOR halk9 to the existing Android 8.0 and how? Thanks a lot.

[@AlexSAndroidRadio]

1. Yes it worth, I still use A9 with Hal9k Mod 4.2.0. 2. Yes 3. No

[@abdelrahmanelmasry5534]

@@AlexSAndroidRadio thanks Alex for your quick reply.. Could you please let me know how to install Android 9 Hal9k Mod 4.2

[@AlexSAndroidRadio]

First update to Android 9. After that you can install Hal9k Mod 4.0. You will need an OTA Key (10€) from Hal9k to receive OTA Updates.

[@andreaslangerjungerleben9491]

Hallo Alex, mein PX30 ist von Ownice OL -700. . Das Ding tut nicht das was es tun soll. Software Probleme. MCU - MTCE.OLS.V3.57a_2 Jul 10 2020. Über die bekannten Verbindungen kaum Aktualisierungen machbar. Der Verkäufer gibt keine Antwort - was kannst du mir empfehlen?

[@AlexSAndroidRadio]

Hey Andreas, wo genau liegen die Probleme? Welche Android Version ist installiert?

[@boroslaslo]

Hi Alex , maybe you can help me , i think my PX30 older android unit for Mercedes stuck in bootloop ( revers cam still works ) but it wont boot up , i dont know how to go to recovery becouse it has physical buttons aswell. I pressume that the software was bad but do you know some tips how can i solve it ? Thank you in advance

[@peetezaah]

Hey Alex, have you ever seen an error on the "Download Firmware" step? And if so, do you know what might be causing it? On the log, I get this information: "DownloadImage-->device did not support directLBA to write gpt" I posted on the XDA forums but I'm not getting any replies. Also, do you still have RKDevTool v2.73? I used v2.74 and wanted to see if maybe the latest version is causing this issue.

[@Daniel_WW]

Hi, Have you found any solution?

[@peetezaah]

@@Daniel_WW yes and no, I didn't solve that error but solved my problem by using Heading Unit Reloaded for Android Auto

[@milirad]

I tried this method today, but it didn't work. I have a Dasaita HU HA2106-V840-8, but I don't have the yellow USB port. They are all black. I certainly tried all 3, but RKdevTool didn't recognize any of them. I also tried the MicroSD card method, but after the reboot, a message appears that an attempt was made to mount the card, but the device was not found. Although before the reboot I found the GPS card correctly in the file manager. I don't know what to do next...

[@AlexSAndroidRadio]

Then you have to use Modinstaller Pro.

[@milirad]

@@AlexSAndroidRadio Yes, I already bought it. Thx

[@SCW82492]

Hallo Alex! Kannst du mir bitte eine. Rat geben ? Ich habe das px6 vorhin bekommen in die Aklasse w169 eingebaut es hat ca 1 std funktioniert . Habe das Auto ausgemacht und Mittag gegessen danach bin ich wieder hin Zündung und Motor an und Zack das Autoradio ist tot geht nicht mehr an ein rst funzt auch nicht..woran kann das auf einmal liegen? Ich habe nichts verändert...hast du evtl einen Tip? Besten Dank. Ich bin am verzweifeln.

[@AlexSAndroidRadio]

Hast du mir vorhin bereits geschrieben?

[@ppvallejo]

Hi I have a px5 and before to do the update I would like to know how to root my device as you said I have to do before the update, so do you have any video to teach me how to root my device? Thank you.

[@AlexSAndroidRadio]

Hi, you misunderstood me. Not before, afterwards. forum.xda-developers.com/android-auto/mtcd-software-development/root-android-10-px6-mtce-t4134041

[@jotagoncalves6247]

Hi! Do you need a routed headunit to do this update or only if you need to change Bluetooth? Thanks

[@AlexSAndroidRadio]

Only if you want to use the Workaround for SD968 Bluetooth module.

[@giaggi72]

Hi Alex's, is there any news for the V5 hal9k version ? Thanks

[@AlexSAndroidRadio]

Sadly no 😔

[@Poshtron79]

Bonjour, J'ai voulu faire la mise à jour pour un px30. J'ai télécharger les fichiers notifier sur l'instruction. Cependant. Pendant l'installation le poste a coupé et il ne redémarre plus. Avez vous eu se problème auparavant? Comment faire!?

[@AlexSAndroidRadio]

In english please

[@Poshtron79]

@@AlexSAndroidRadio Hello, I wanted to update for a px30. I uploaded the notify files on the instruction. However. During the installation the station cut off and it does not restart anymore. Have you had this problem before? How to do!?

[@AlexSAndroidRadio]

@@Poshtron79 repeat the process. You should be able to flash the device again.

[@Poshtron79]

@@AlexSAndroidRadio it remains on a black screen and the reset function does not work. nothing happens once press the 5s

[@AlexSAndroidRadio]

@@Poshtron79 connect the device via USB, press and hold the power/reset button until the button light start to flashing, release it briefly and press once again quickly.

[@WarlockSRB]

All this is nice, but I am not sure if I can do upgrade of my Android OS. That is, I am not sure what to look for. My unit is MTCE KGL 3.01, so I understand the MCU upgrade, straight and forward, but how to update Android from 8.1 to at least 9.0, there isn't any under KGL? Can I instal any other?

[@AlexSAndroidRadio]

Hi, for MCU you always have to use MTCE KGL, for the main android firmware you can use every version.

[@WarlockSRB]

@@AlexSAndroidRadio so I can download any of the 3 that are for PX30 under Android 10, do i need to get that OS mod apk? What for is used CANBUS update file? Is there any program for creating custom launchers, would love to make it look as close to original head unit as possible? Thanks

[@AlexSAndroidRadio]

Yeah, you can use every A10 PX30 version. No need to update Canbus. You can download many Launcher in Playstore.

[@WarlockSRB]

@@AlexSAndroidRadio just noticed that I have a MD725 BT module... lol me... will see if I can find any newer one on ebay

[@Chrisunkn0wn]

Hi Alex, ich habe zu Zeit ein 10 Zoll Display Doppel Din Radio im Auto, dieses ist gute 3 Jahre alt. Ich würde diese gerne Upgrade welche Gerät sind zu Zeit zu empfehlen? Bzw. welche CPU? Viele Grüße und Danke

[@AlexSAndroidRadio]

Welches Gerät hast du denn aktuell? Welche MCU? Welcher Prozessor?

[@thk9303]

Hi Alex, pl. help me. By Download Firmware gets stuck on 2% and then shows successful. But later radio just boots, says erasing and then goes blank.

[@AlexSAndroidRadio]

Wait a few minutes or repeat the process.

[@thk9303]

@@AlexSAndroidRadio tried multiple times.. then downloaded AndroidTool 2.9x and problem got resolved.. Thanks :)

[@rutemartins7885]

Hi Alex , I have a MTCB-KLD-V2.30 RK3066 with android 4.4. I wanted to update android but I'm not getting it. Do you think you can help? just do the steps in this video? Thanks

[@AlexSAndroidRadio]

Hey, your mtcb device is very old. There's no update support anymore.

[@mohammedsaeed7743]

I have this yt9216cj device with android 10.1 interface bad one l what to do something can I get any help? how upgrade to something cool

[@AlexSAndroidRadio]

yt9216cj?

[@egiptoantiguo]

also i have px5 MTCE_GS but in GS folder there's no IMG file, only OTA.

[@AlexSAndroidRadio]

For MCU you always have to use MTCE GS but for main android firmware you can use every version.

[@egiptoantiguo]

@@AlexSAndroidRadio thanks

[@maks223]

Hey, I have and OTG (USB A-A) cable, tried both slots, and also my PX5 MTCE Headunit has mini-usb port in the front panel. Yet my PC doesn't detect anything. Could it be fault of drivers, or windows 10?

[@AlexSAndroidRadio]

Try a USB 2.0 Port.

[@maks223]

@@AlexSAndroidRadio i tried, but the same thing happens

[@AlexSAndroidRadio]

@@maks223 i have two test devices. On one this method works, on the other doesn't. 🤷🤷🤷

[@AssadNiang]

Hi Alex, can you convert an ota to img? The version I am looking for is not available im img

[@AlexSAndroidRadio]

This is not possible. Update via Img and afterwards install OTA.

[@ПростоТимофей-ф5в]

Hello i have a question. I have px5 and MCU with CZ letters, what android 10 image should i use - CHS, GS... or i need to find CZ version?

[@AlexSAndroidRadio]

привет Тимофей, для MCU только CZ, для самого Android ты можешь каждую для PX5 прошивку взять.

[@ПростоТимофей-ф5в]

@@AlexSAndroidRadio Проблема в том, что у меня Андроид 8, при установке Андроид 10 пишет ошибку Could not open /proc/config.gz

[@MrSebitagc]

Hello, I'm having problems with BT, my version is PX5, and it's like SD968, but many devices don't connect to me. What I can do? Thank you

[@AlexSAndroidRadio]

Hi, which devices don't connect? Did it worked on Android 9?

[@MrSebitagc]

@@AlexSAndroidRadio Thanks for answering. The only thing that does connect is my cell phone. What I am trying is to connect Alexa Echo Car Gen 2, it appears as if it sees it, but when connecting it does nothing. It's Android 10.

[@AlexSAndroidRadio]

@@MrSebitagc this is a restriction of these devices. The head unit acts as a receiver.

[@MrSebitagc]

@@AlexSAndroidRadio But it happens to me with most devices, not only with this one, so I understand that it may be a problem or configuration of the multimedia radio. In one part of the video I saw that you were referring to Bluetooth, but I didn't understand much

[@AlexSAndroidRadio]

@@MrSebitagc you can connect phones and some OBD devices. No Bluetooth speakers, no controllers etc.

[@patos6619]

Hi Alex. Do you know if there are any updates available for my device? Dasaita Max Android 10 PX6 4Gb + 64Gb. MCU version MTCE_HA_V3.57_1

[@AlexSAndroidRadio]

Yeah, look into the HA folder on Yandex.

[@levimaessen123]

Hi can u also use the ota file cant seem to find the IMG file for my px5 mtce GS

[@AlexSAndroidRadio]

For MCU you always have to use MTCE GS, for main android firmware you can use every version for px5.

[@WaveyKat]

hi Good morning Alex hope all is well! I did every Step in Your Video to update my PX5 Device From Android 8 to 10. but I get "Download Error Fail" in the RKdevTool how do i fix? can you help please thanks

[@AlexSAndroidRadio]

Try another usb port or cable.

[@WaveyKat]

@@AlexSAndroidRadio thanks for the super fast reply.. I tired 3 Different USB Ports and two Different Cables also Tired a Different Laptop and its USB Ports same problem "Download Error Fail" In the RKDevTool. Also tried IMG HCT5_PX5_9.0_IMG(20190322) & HCT7_PX5_10.0_IMG(20200612) same error :-(.. any ideas? thanks much!

[@AlexSAndroidRadio]

Ok, try to go to the Maskrom mode and than flash the Img.

[@tonywallas]

I have a PX5 on Android 8 Hal9k Rom and i want to flash an Android 10 Rom. I have this MCU: MTCE_SKY_V2.94e_1 but the problem is i can't find an MCU Android 10 for my device

[@heshamjalal]

Hi Alex! I think I soft bricked my device after using the microSD method I think that happened because I used a 16GB SD card instead of 4GB as u said, now my device shows nothing but the buttons led and didn't respond to anything at all, could this method be useful or there is no way except opening my device and flash it and if so could you help me with the instructions Device: PX5, MTCE GS

[@AlexSAndroidRadio]

Repeat the process or try the otg method.

[@tombielak4360]

Hello do you know what to do if; When i wanted to upgrade my car mcu my battery died and now my radio wont turn on. What can i do to make it work again?

[@AlexSAndroidRadio]

Did you tried the device on a workbench?

[@tombielak4360]

@@AlexSAndroidRadio what do you mean

[@AlexSAndroidRadio]

kzbin.info/www/bejne/qKPGpXWumNuCqKM

[@xs-cyber]

Hi, if mt MCU says T5.3.20-23-etc could this work somehow? I want to use your rom, but it came with Android 7 and that MCU version

[@AlexSAndroidRadio]

MCU should start with MTCE.

[@RichardTrautmann]

What to do if there is no IMG firmware for my version? (PX5 LM)... there is only OTA

[@AlexSAndroidRadio]

LM is only important for MCU. For the main android firmware you can use every version for px5.

[@RichardTrautmann]

@@AlexSAndroidRadio Thank you for the speedy reply - so it has to be IMG? for example I can use this file? HCT7_PX5_10.0_IMG(20200612).zip

[@AlexSAndroidRadio]

@@RichardTrautmann yes 👍

[@haajee1]

What a hell to flash a device to android 10. Everything is compaitble. I am really shure that i got OTG sometime working but can't get it in recovery now again. The SD card methode do i like more. I got a gps card reader. But not a 4GB micro SD card. The are so difficult to find and eveywhere out of stock... I got flashed a 32GB card but it just boot in to system...

[@AlexSAndroidRadio]

Try to use USB 2.0 Port

[@haajee1]

@@AlexSAndroidRadio Thank you for your suggestion but i have finally found a cheap micro sd card of 4GB on Amazon. I hope this will work but i'm scared it won't because it didn't also nothing with a 32GB micro sd card

[@haajee1]

@@AlexSAndroidRadio today arrives my new 4GB micro SD card but sadly does not work... Maybe indeed a usb 2.0 a-to-a cable ora usb 2.0 stick?

[@AlexSAndroidRadio]

@@haajee1 I've used a USB 3.0 cable with a 2.0 extension cable. Without the extension cable it did not work.

[@AssadNiang]

I can't enter recovery mode. I tried your method, but it just reboots the unit. I have a dasaita max10 rk3399 with Android 10.

[@AlexSAndroidRadio]

If you're already on android 10, you can just install the update.zip with a wipe data.

[@AssadNiang]

@@AlexSAndroidRadio I am trying to downgrade to a previous version of android 10 ota HA3_rk3399_10.0_ota(20200706), I am currently on HA3_rk3399_10.0_ota(20201217). When I try to downgrade, it gives me an error message 'package cannot downgrade'. So I am trying the IMG, then load my ota.

[@AlexSAndroidRadio]

@@AssadNiang Ok, you could also use Modinstaller Pro to install the stock A10 Recovery. Afterwards you can install any A10 firmware.

[@AssadNiang]

@@AlexSAndroidRadio When it fails to downgrade, it takes me to A10 Recovery (Android Recovery by HCT V10.3.1), can I use that menu and navigate to 'Apply update from USB or SD card', and put the update.IMG in the USB? Here is a screenshot: forum.xda-developers.com/t/dasaita-latest-mcu-and-updates-for-rockchip-px5-octa-core-2g-ram-32gb.3575155/post-84338075

[@AssadNiang]

@@AlexSAndroidRadio I was finally able to go into recovery mode on my unit, and everything worked as you stated in your video. Thank You!!!

[@jerzionit]

Do you have another link for the RK Dev tool?, link is broken.

[@AlexSAndroidRadio]

1drv.ms/u/s!Alb1EFlGVfVUgUl6w3XvpjvA5Mbh

[@RichardTrautmann]

The driver link and the rkdevtool link are broken, do you have updated links?

[@AlexSAndroidRadio]

Hi here 1drv.ms/u/s!Alb1EFlGVfVUgUl6w3XvpjvA5Mbh 1drv.ms/u/s!Alb1EFlGVfVUgUjv3UB0UrXiiKVS

[@RichardTrautmann]

@@AlexSAndroidRadio Thank you

[@TheMiickyct]

I have PX5, Android 9, MTCE_MX2 can I update android 10??? Thanks

[@AlexSAndroidRadio]

MTCE = compatible 👍

[@TheMiickyct]

@@AlexSAndroidRadio does it have to be like in the video? with the pc? And what version do I get from HTC2, HTC4, HTC7? I can't do it with a usb? Thank you very much

[@AlexSAndroidRadio]

@@TheMiickyct There are 3 ways to update to A10. OTG MicroSD Modinstaller Pro For every method you can find a Video on my channel. For MCU you always have to use MTCE MX2, for the main firmware you can use every HCT2, HCT4, HCT7, HA2, HA3 and so on.

[@TheMiickyct]

@@AlexSAndroidRadio do you need to be root?

[@AlexSAndroidRadio]

@@TheMiickyct Nope

[@ahkhann]

Hi Alex! What is the best launcher for Android Auto with PX6 Android 11? Where do I find your launcher? Thanks!

[@AlexSAndroidRadio]

PX6 Android 11?

[@denoalex8132]

Mine radio shuts after 10 Minuts of driving.. what can i do..??

[@AlexSAndroidRadio]

Sounds like a defect Canbus Decoder.

[@matanvaknin2036]

How can you power up the HU without the car?

[@AlexSAndroidRadio]

kzbin.info/www/bejne/qKPGpXWumNuCqKM

[@matanvaknin2036]

@@AlexSAndroidRadio thanks but its in German, any chance for an English video?

[@AlexSAndroidRadio]

Just follow the video, its easy. You need a good 12v 5A power supply. You also need the red (acc) and yellow wire for 12v, black for GND.

[@austinsec]

I dont suppose you have Mod Installer Pro 2 for free?. Also I have a px5 android 9 hla I dont seem to understand what file I need to get it to android 10

[@austinsec]

I have a pX5 build number rk3368-use4rdebug 9 PI 20200512.093529 MTCE_HLA_V3.46_3 kernal 4.4.167 android 9.0 octa-core cortex-a53 @1.5g I would like to update to 10 or 11 Thank you in advance

[@AlexSAndroidRadio]

There's no Modinstaller Pro 2 for free 🤣🤣 For MCU you always have to use MTCE HLA, for main android firmware you can use every version like hct.

[@austinsec]

@@AlexSAndroidRadio can you tell me witch firmware to use please . I really want it to have sleep mode . it has shut off delay but 1 hour so every time 30 second reboot(hate that) . Also is there any fix for reception. I am in the USA AM band almost nothing , FM sometimes ok sometimes sucks,.

[@Rafabdcll]

no found the link

[@ummehaniasma8237]

hi, thank you for all your hard work. the driver link do not work..is there any working link ? pleasee.....

[@AlexSAndroidRadio]

drive.google.com/file/d/1KOB5v0cR_ozD9GKtmSOvEMhE5PHM0KzR/view?usp=drivesdk

[@AlexSAndroidRadio]

drive.google.com/file/d/1IEYQgrSxur61aMUNrOkVeHhw38s_WeIA/view?usp=drivesdk

[@ummehaniasma8237]

@@AlexSAndroidRadio thank you for quick reply Alex. I downloaded tool 2.71 which is chinese language . then when i reboot my headunit nothing pop up on my windows like yours . not sure what i am doing wrong .. :(

[@AlexSAndroidRadio]

Try to use a USB 2.0 Port. You can change the language to English.

[@Sebell96]

Habe ein Avin PX6 mit Android 10. Kann ich downgraden auf 9? Oder bekomme ich das Hal9k Image auf Android 10 zum laufen?

[@AlexSAndroidRadio]

Ja du kannst downgraden.

[@jenathjeyarasa7999]

Hi ich habe einen xtrons radio doppeldin px30 android 8.1.0 mit mtce hzc Mein radio spinnt mega Geht automatisch in irgendwelche apps rein. Ich habe einen deckenmonitor drin und kann mein bildschirm nur mit dvd cd teilen, leider kein youtube, sd oder usb video datei. Gibts dafür eine lösung? Ich habe all deine videos angeschaut und verstehe nicht so genau wie ich vorgehen soll.

[@AlexSAndroidRadio]

Hey, mit den externen Monitoren über Cinch kenne ich mich nicht aus. Uber Hdmi wird alles ausgegeben. Mach doch mal dieses Update und schau ob es besser läuft.

[@jenathjeyarasa7999]

@@AlexSAndroidRadio kann ich dir irgendwo eine private nachricht schicken? Über insta, fb oder sonst wo?

[@AlexSAndroidRadio]

Nein wozu? Bitte nutze die Kommentarfunktion hier bei KZbin. Dann können andere Leute mit ähnlichen Problemen ebenfalls die Lösung finden.

[@jenathjeyarasa7999]

@@AlexSAndroidRadio kannst du mir vielleicht veraten, wo ich den neusten version meines mcu version bekomme? Habe einen MTCE_HZC_V3.00b_1 von 01.12.2018 drauf (px30)

[@jenathjeyarasa7999]

@@AlexSAndroidRadio und ich möchte das Update runterladen allerdings gibt es drei auswahl zu meinen px30 android 10 HCT LM Oder OLS welches muss ich da runterladen?

[@dozendozen1238]

My unit has mcu Ts10v.1.1-100, any upgrade for that mcu?

[@AlexSAndroidRadio]

Nope

[@dozendozen1238]

Ok man. Great work you doing for the community.

[@bglee2351]

Hi. Alex~ Does it work Mac Book..? using USB C type-USB cable..

[@AlexSAndroidRadio]

I don't know, try it and report.

[@Alcor1410]

Hello, can I update android PX5, MCU: MTCE_XRC_V2.89_1, BT: MD725???

[@AlexSAndroidRadio]

Yes but maybe your BT will not work.

[@dachzeltschatzsucher]

Schöne Grüße aus Mosbach, gibt es dieses Video auch auf Deutsch?

[@AlexSAndroidRadio]

Hey, servus, ja gibt es. kzbin.info/www/bejne/aJWlkmh6jpyVoLM Grüße aus Sinsheim 😊

[@Chieh-Ge]

My PX6 android 9 has Zlink installed, will it keep it once i upgrade to android 10.0?

[@AlexSAndroidRadio]

Yes, because Zlink is included in this firmware.

[@Chieh-Ge]

@@AlexSAndroidRadio Good news, Thanks bro

[@Chieh-Ge]

I already upgrade to android 10 on my Dasaita PX6 head unit by following your instruction, really appreciate your tutorial!

[@ummehaniasma8237]

@@Chieh-Ge when i reboot my headunit ,why the tool 2.71 dont find the loader device. i have the same as yours px6 android 9 ..thx in advance ..

[@JensKolling]

Hi Alex! Where do i get the IMG file for HA PX5, can only see ota?

[@AlexSAndroidRadio]

Hi Jens, there's no HA IMG. You can install the HCT one and afterwards install the HA OTA as a normal update via USB with the update.zip on a Fat32 formatted usb flash drive.

[@auddawa4260]

@@AlexSAndroidRadio Hi Alex, Is it the same process?, as I can't find HA image for my PX6(1024x600)?, where can I get the HA2 IMG or should do the same by using HCT IMG?, Thanks in advance.

[@AlexSAndroidRadio]

Yes, the same procedure as Jens.

[@auddawa4260]

@@AlexSAndroidRadio Many thanks, however, I've tried steps shown in your clip, with USB A - A, and all 3 PX6's usb ports, unfortunately my Laptop and Dasaita PX6 can't communicate or get connected(althouht have tried to change usb ports and A-A cables and another Windows7 laptop), this means I can't do upgrade my PX6'AD9 to AD10 this method, right?

[@AlexSAndroidRadio]

Did you installed the driver?

[@rogerswiss]

I can't entry in recovery mode on my px5 pressing rst button.. Can someone help me please??

[@AlexSAndroidRadio]

Which device do you have?

[@rogerswiss]

@@AlexSAndroidRadio isudar for bmw e81 android 8 , I found how to get recovery is pressing power and volume together and after lights blink press 1 time power but my pc won't connect, I will try another pc

[@AlexSAndroidRadio]

It is a Mtce device?

[@rogerswiss]

@@AlexSAndroidRadio yes mtce gs v2.76b_3

[@AlexSAndroidRadio]

Ok, update your MCU to the newest available version.

[@oscarchave2559]

Can Upgrade android 11?

[@lagwagone]

Hi Alex, I have Dasaita MAX10 and I followed their supports instructions to upgrade their firmware to stop flicker I was having. 1, Fistly , please download the HA3_rk3399_10.0_ota(20200915), unzip the file , only copy the update.zip file into sd card /usb disk , update the firamware . 2, secondly , please copy the DMCU.IMG &DMCU.EXT into sd card /usb disk , update the mcu . The contents of DCMU.EXT is "screen:18". After this I flashed the HTC image using RKDevTool, but now my screen is blank even when in recovery :'( Is there anything I can do to resolve this? I'm worried its bricked :'(

[@AlexSAndroidRadio]

Try again.

[@lagwagone]

@@AlexSAndroidRadio Tried 4 times with hct7_rk3399_10.0_IMG(20200415).zip with 2 different laptops. I'm going to try the android 9 version HCT4_rk3399_9.0_IMG(20191125).zip now.

[@lagwagone]

@@AlexSAndroidRadio didn't work with Android 9 either. I think my MCU screen type screen:18 is not compatible with the HCT firmware so I think the only way to fix this is to get an .IMG of the latest dasaita firmware to flash with rkdevtool. I have asked the seller to send me one.

[@AlexSAndroidRadio]

Do you have a MicroSD Slot?

[@lagwagone]

@@AlexSAndroidRadio I do, I would update to the latest dasaita version after flashing HCT but I don't know how to with the screen off - uploading a video of it now

[@tgiannakarios]

hi alex, with this you can downgrade to android 9 or 8?

[@AlexSAndroidRadio]

If a image file is available for this Android version, then you can do it.

[@lewisc7866]

will Bluetooth WQ_RF210 works?

[@AlexSAndroidRadio]

Yeah 👍

[@sdcarv]

It works on MTCE_MX device with android 9?

[@AlexSAndroidRadio]

Every Mtce is compatible, but i don't know this method will work for your device. Try it!

[@sdcarv]

@@AlexSAndroidRadio o need the 2 files(mcu and ROM) to update my device? Thanks

[@AlexSAndroidRadio]

Frist update the MCU, then the system.

[@sdcarv]

@@AlexSAndroidRadio but my mcu version (3.45) is most recent than version you have in site (3.30)

[@AlexSAndroidRadio]

Ok, then only the system.

[@TheKokosat]

For Sf0 px5?

[@AlexSAndroidRadio]

Nope

[@lewisc7866]

Hi, where to get the img file now?

[@AlexSAndroidRadio]

Link is in the description.

[@lewisc7866]

@@AlexSAndroidRadio thanks. I follow the link, i only see ota firmware only. no img version, I have HA version, can i use HTC firmware?

[@AlexSAndroidRadio]

@@lewisc7866yes you can. For MCU you always have to use MTCE HA, for main android firmware you can use every version.

[@lewisc7866]

@@AlexSAndroidRadio btw, do you think I can go from 9 to 11 directly if I have the 11 recovery image? Have you tried it?

[@AlexSAndroidRadio]

@@lewisc7866 as far as I know A11 is only available for PX6. I think it should work.

[@johannkaufmann4064]

Hey Alex ich hab eine MCU Version CSN2_D_1152020_114303 hab dafür kein Update gefunden kannst du da weiter helfen

[@AlexSAndroidRadio]

Hey Johann, schau mal hier. forum.xda-developers.com/t/klyde-px4-px5-px6-head-units-with-mcu-csn2-csn2_d-csn2_8600_d-android-8-9-10.3912413/

[@johannkaufmann4064]

@@AlexSAndroidRadio Dankeschön das forum hab ich schon gesehn aber welche version kann ich jetzt nehmen hatte eine ausprobiert da kam dann eine error Meldung also das es nicht drauf gespielt wurde und verändert hat sich auch nix

[@AlexSAndroidRadio]

Du brauchst auf jeden Fall eine Version mit DSP, zu erkennen am D in der MCU. Welche Android Version hast du jetzt? Welchen Prozessor?

[@johannkaufmann4064]

@@AlexSAndroidRadio Android 9 Prozessor weiß ich nicht genau

[@AlexSAndroidRadio]

@@johannkaufmann4064 Schau mal in den Einstellungen bei Über das Tablet. Das musst du wissen.

[@roberto5872]

The links don't work

[@AlexSAndroidRadio]

Which one?

[@roberto5872]

@@AlexSAndroidRadio of the drivers, but I found version 4.8 online. but I tried to hold down the reset button but instead of starting the boot, the writing shutdown comes out, the LEDs go out, the keys and head with the display off, and I'm forced to cut off the power to be able to restart the device. but the boot does not start as shown in the video

[@ute5941]

Hello Dear can you please tell me if it will work on PX5 ... MCU CSN2_10132020 if not can you send me a link where you update CSN2 version

[@AlexSAndroidRadio]

Hey, this update is only for devices with MTCE MCU. You have to check this thread. forum.xda-developers.com/t/klyde-px4-px5-px6-head-units-with-mcu-csn2-csn2_d-csn2_8600_d-android-8-9-10.3912413/

[@AndreaSanchez-jj2hy]

I sent you a dm on instagram 🙏🏻

[@AlexSAndroidRadio]

Why?

[@AndreaSanchez-jj2hy]

@@AlexSAndroidRadio need help

[@AlexSAndroidRadio]

I do not help via dm. Write your problem here.

[@AlexSAndroidRadio]

German video kzbin.info/www/bejne/aJWlkmh6jpyVoLM

[@callierainoenslin4149]

Hi i am having a BT conecction problem with my PX30 Version HCTG_HCTV3.79_1 BT:SD-BC6 ...I can't find any update on my version any suggestions???