Full Wrap Sublimation Mugs (Sublimate Under the Handle!)

[@AngieHolden]

Get the free template to make these mugs here: angie-holden.ck.page/f843b51e0c

[@betsyboop]

I can't see the template on your website< please help.

[@louiseroach4598]

i went to your site and i couldn't find it . please help!

[@AngieHolden]

Click the link in the comment above, add your name and email, the template will be sent to you.

[@reneeboyd7695]

Thanks Angie Holden

[@heatherpenner2748]

when i add the template to canvas it wont let me ungroup. to seperate them any tips?

[@DebraParkerAlObeidy]

GOOD NEWS! I tried this WITHOUT shrink wrap and IT WORKS BETTER! So much easier! You just need to make sure to tape all sides around the handle. I had PERFECT mugs!

[@AngieHolden]

I have never had any luck without shrink wrap so I personally do not recommend it.

[@JulieEbersole]

You're always so thorough, yet concise--thanks so much for another great tutorial, Angie!

[@AngieHolden]

Thank you for watching!

[@dkquick72]

I had a feeling this was possible, but wasn’t sure about the process. Thanks so much for sharing your expertise as always! You’re the best!!!

[@AngieHolden]

Yay! Happy to help!

[@bottlethisglassthat2576]

Hi Angie and thank you sooooo much for this video! I bought Hobby Lobby's sub mug with a handle and it's just a little wider than the norm so not a good fit for the Cricut Mug Press; I have an attachment that goes with my heat press but was not ready to tackle that feat either so I wanted to see about sublimating it in my sub oven with a shrink wrap and low and behold your video was right on point. The only issue I was having was the width with handle was not going to slide down the sleeve so I had to cut along seam about half way then fit it around mug and tape the heck out of it underneath the handle as you did and of course the end where it was slit. To assure a snug fit, I used my silicone bands on top of and under the handle after shrink wrapping it and voila! It came out fantastic and it was a birthday for my daughter's teacher. Whew!!! I want to make more now. 🤣🤣🤣

[@AngieHolden]

Yay! Happy to help!

[@marlenenicholl6825]

Wow! How great is this? Thanks for always being there testing stuff out for us - CrystalAnn with Design Bundles just did a video yesterday 2/21, using an inkjet printer, on Best, and then applied the design to a cotton t-shirt - color was superb - then she turned right around and washed it which I think she should have waited 48-72 hours - so perhaps these projects will be less expensive to create one of these days

[@MsSimpleTreasures]

Angie, you and your tutorials are awesome. I’m so glad that you provided us with a template as I was shopping around trying to find one. I have been having so much trouble getting a mug to come out good in the new convection oven I purchased and my shrink wrap always melts. You are a savior.

[@AngieHolden]

Glad it was helpful! I will say that cheaper shrink wrap can melt. I do buy a higher quality version!

[@InquiringMindsKnow]

@@AngieHolden Hi - so glad I found you! The like to the shrink wrap does not work. Do you have another one? TU

[@alicacummings4126]

Love this. Side note, you can also change the template to a regular cut (not a print and cut) to let Cricut cut a test template out to check your size.

[@AngieHolden]

Definitely! I do NOT want to run my Cricut for a test! HA HA HA!

[@kathleenbaginski6573]

Hello - thank you - each time i watch your videos - i learn more and more about printer, cricut & how to do the correct way for megs press... thank you for doing these vidoes

[@AngieHolden]

Happy to help!

[@cynthiafelder9097]

just love the way you think outside the box. I did this once with cricut press but sub was lighter under handle

[@luv2sew247]

Thank You, Angie!!!😊. This is awesome. Two new addition to the Cricut crafting world (larger print-then-cut and your demonstration of how to sublimate under the mug handle as well. You are the best.🎉🎉🎉❤

[@AngieHolden]

Thank you for being amazing!

[@idxdesign]

This is why you're the queen of subbing!

[@maladylis08]

Thanks Angie ! I looked all morning on how to make the printing larger and all the videos skipped that till I sat down to watch you make mugs lol thanks again, it was very helpful !

[@AngieHolden]

Glad it was helpful!

[@cherylwortman9194]

Love this video. Have tried to do this myself several times with no suctexas. Love your pointers.

[@vatren765]

love this video. I think my skill level has gone up after watching this video.

[@summerlarsen]

Now I’m going to have to invest in an oven! Damnnnn. 😂 I really need to stop watching KZbin or start selling some items to keep up with all these cool ideas and tips! Thanks Angie! I love your channel!

[@AngieHolden]

Right!!

[@lindagray2217]

Thank you for mug template. This should really help. You do such a great job in explaining.

[@AngieHolden]

Glad it was helpful!

[@LisaVornhagen]

Great tutorial and very easy to follow. I love the strawberry pattern!

[@AngieHolden]

I really love these strawberries!

[@aliceharmon728]

Great Video. I just ordered a sublimation oven, epson ecotank printer and sublimation ink. Also gathering supplies. I saw the shrink sleeve link in the comments, but it did not work. I want to order some to have on hand because I am definitely going to do some mugs. Can you update please? I don't want to order something that may not work well for mugs. Even if the website is no longer working, maybe the size dimensions for the shrink sleeving will put me in the ballpark. Love your videos and watch them to help me learn more. I just did a full purge of my craft room and reorganized. My reward to myself was purchasing equipment for sublimation. So psyched! I purchased the PYD Life mini oven. Thought that would be the best option since I can do most all the stuff without having several pieces of equipment and getting more bang for my buck (that's the Scottish in me LOL).

[@AngieHolden]

Try this: kzbin.info/www/bejne/foe0Z2ZmjdeUbKs

[@georgialewis7645]

Oh Mylanta Angie... .AWESOME video.. you even answered questions I haven't even thought to ask yet..Thank~You!!

[@AngieHolden]

Glad it was helpful!

[@StarrOlinger]

Thanks Angie! I've always wanted to do a full wrap! Can't wait to see what you do next. 🙂

[@rebeccamuehl2183]

Angie, love your videos. You give so much detailed information . Thank you.

[@AngieHolden]

Happy to help!

[@veedoubleu8189]

Great tutorial, Angie!! Thank you 😊 this gave me an idea for the handles too

[@AngieHolden]

Yea my next idea MIGHT be to try and perfect the handles! HA!

[@nahnisjourney1406]

Great tip to size up your mug template.

[@newcastleleisa]

How good is this!! AMAZING!!

[@AngieHolden]

Thank you!

[@47bettie]

Great Tutorial Angie as always explain everything so well!! Hugs Liz..

[@ginaspears9168]

Hi Angie- Can you do a video on how to wrap 20 oz skinny tumblers with handles? The handles are more square/rectangular. Also, do you have a video on how to change edges where the template meets to blend better or how to turn it into a seamless design? Thank you! Love your videos! They are all easy to follow and very helpful!

[@AngieHolden]

Video coming this week on seams!

[@delciethompson8920]

I love your videos! You always explain everything so thoroughly! Thanks for sharing the free template also❤

[@AngieHolden]

You are so welcome!

[@rickandnannettequalls5502]

Thank you so much for your videos! I have learned so much from them!!

[@ginaspears9168]

Great video with great tips! Thank you!

[@sophieca6906]

Excellent teaching!

[@AngieHolden]

Thanks!

[@amybutler3300]

Thank you. I knew there had to be a way to do it without buying the clamp wraps!

[@AngieHolden]

Happy to help!

[@meghanpost9580]

You could use your template to trace a cut line out on the white one so you can see where your cutting, if you can't or don't want to use a cricut. 😊

[@AngieHolden]

You definitely can! I just had a Cricut to use!

[@susanolmo4516]

Thank you so much for the templates and the video! Definitely will try it!!

[@AngieHolden]

Happy to help!

[@blessedmama4361]

This is great Angie!!

[@michellemoore1316]

Great video. ❤️ Thank you for sharing

[@April-rs8gz]

Love this! Wish there was a way to do this with a mug press!

[@AngieHolden]

I don't think there is!

[@tfodthogtmfof7644]

You could use the heat shrink and place it in a mug press with butcher paper to protect the press. The mug should transfer enough heat and the shrink wrap should provide the pressure to the under handle area. It would be worth an experiment.

[@marys.5050]

Hi Angie, thanks for the great content! This is so clever. In looking at best selling mug wraps, I'm seeing the sizes of the wraps really vary, both in the 11oz and the 15oz. I'm looking making and selling wraps and not sure what size is optimal, especially for people making their own mugs. I'd really appreciate any thoughts you might have on that. Thanks so much!

[@AngieHolden]

Yea there are so many sizes. The issue really is that mugs vary depending on the brand. Not sure how you can really find something that will work for every mug that exists!

[@sandyglass-minski6837]

Thank you so much!! This video is exactly what I was looking for 🤩

[@nahnisjourney1406]

I probably would have printed keychains or earrings or something else on the extra sublimation paper. Great video!

[@AngieHolden]

That's a great idea!

[@jayc6159]

🤣 I was thinking the same thing I hate wasting paper : )

[@MariaGarcia-cn2qu]

Thanks Angie!!!!

[@1soapspongesasmr]

I have been trying to sublimate on mugs by printing with my Epson F170 on a paper that is meant for both Sublimation and DTF which requires powder, am I not supposed to use the powder? in several videos I have seen, no one is using powder, what should I do?

[@AngieHolden]

I don't use my sublimation printer for DTF at all. I would get a sublimation paper and sublimation mugs and use the printer as a sublimation printer.

[@1soapspongesasmr]

@@AngieHolden Thank you, I found out I was using the wrong paper my brain was not registering correctly then I found out, Thank you Jesus ☺

[@starbrown1219]

Very cool. Looks great.

[@AngieHolden]

Thanks!

[@RoyaltyOnesFamily-b5l]

Thank you for sharing ❤

[@DianaPerez-dn3wj]

Love the video Which setting material did you con design space to cut the sub paper?

[@AngieHolden]

I used a laser copy paper setting.

[@sstingram]

Hi Angie. What was the setting for the over and can I use those same settings for a convection oven?

[@AngieHolden]

I generally use 350 degrees for 7 minutes. That is a good place to start but each oven can vary.

[@embroidery-world]

Thank you for the great videos, but I'm giving up on trying full wrap - have ruined so many mugs and no progress. I tape the paper down all around before using the shrink wrap and get it as tight as I can around the handle and then tape again and apparently it's not tight enough to make the print stick. I have no problem with the paper and mug when I do in heat press, so know it's not that and have no problem with tumblers in the convection oven. Could be partially time and temp, but near the handle no design is transferring at all so think it's the pressure. Oh well... on to something else and toss the remaining 20 color handle mugs.

[@AngieHolden]

If nothing transfers at all, my guess would be the manufacturer is not spraying the coating in that area.

[@embroidery-world]

@@AngieHolden it transfers in the main part of mug, just not around the handle and is lighter or non existent going from handle to middle of mug so that's why i think it's not tight enough around the handle even though it's taped down

[@laurasmith3652]

It could be the mugs themselves not having the coating all around them. What brand mugs are you using?

[@rolandhawbibata8029]

Thanks à lot this is exactly what I was seeking for 🥰

[@AngieHolden]

Glad it was helpful!

[@nahnisjourney1406]

They look BEAUTIFUL!!! Can the handle also be sublimated?

[@AngieHolden]

Handles are tricky. The answer is sometimes. They are not always coated well.

[@tanyacarter873]

Love your work the wrapping all around gives the mugs a more professional look Did I here you say anair fryer could be used?

[@AngieHolden]

Yep! Air fryer is actually a convection oven. Just don't use it for food any longer.

[@jannymorrow]

This is awesome. Thanks for the template. I will definitely be trying this. Now, if only Cricut Design Space would allow for ICC profiles in the printing.

[@AngieHolden]

You can set your computer to have an ICC profile for the printer. Try this video from Cori George: kzbin.info/www/bejne/hafQlmaYiK-rm5I

[@jannymorrow]

@@AngieHolden Unfortunately, this did not work at all. If I print with Photoshop and select the ICC profile it works perfectly. Following the instructions to add the profile in colour management, etc., did not work at all. I'm not sure why not. I followed the directions exactly and the profile is showing under the printer with colour management as the default.

[@AngieHolden]

It is tricky and took me a few hours to get right frankly.

[@jannymorrow]

@@AngieHolden Would you mind if I emailed you some screenshots and maybe you can see if I am missing something?

[@lindagray2217]

I have the PYD Life convection oven..Do you pre-heat the oven before you put the mugs in the oven?

[@AngieHolden]

You don't have to but I do. I usually preheat while I am wrapping so the time is shorter.

[@K_Wolff]

I LOVE these!!!!

[@AngieHolden]

They are so much fun!

[@JudyBiarkis]

Hi Angie a quick question! When I click on “Pen” my uploaded image turns to grey. I am using an IMac and Design Space Beta v7.37.121. What am I doing wrong? Thanks so much! Love your videos!

[@AngieHolden]

Changing to a pen makes it change to a draw line instead of a print then cut. I think I changed the TEMPLATE to pen not the image.

[@AiryAsh]

Angie! Love the free template for a full wrap. Any chance of latte style cups templates?

[@AngieHolden]

I only have the two so far!

[@HeatTransferWarehouse]

THIS IS AWESOME!!!! THANK YOU ANGIE!

[@AngieHolden]

I'm glad you like it!

[@victoriagriffiths-jones8046]

Amazing! Thank you. My shrink wrap melts onto my mug in the oven, I can't get it off. Can anyone tell me what I'm doing wrong?

[@AngieHolden]

More than likely it is the shrink wrap brand. Try another brand as yours is probably not rated for high enough temperatures.

[@cynthiafelder9097]

angie love this but can you do a photo template with the pictures going under the handles

[@AngieHolden]

Sure! Just use the same template to slice your photograph! It works the same way!

[@cynthiafelder9097]

@@AngieHolden thanks angie

[@carolwarren-avonind.repsal754]

You are amazing. Thank you.

[@AngieHolden]

Wow, thank you!

[@TheMistyjade1]

Hi just wonder if you can help. When I sublimate phots onto mugs I get a black line around individual photos wonder if you can help thank you

[@AngieHolden]

It may be the program you are using to make your project?

[@carolynpicanzo4386]

Hi Angie, I love all your videos and hoping you can help me please. I have the EPSON ET-3830 printer that I converted to sublimation ink. My color works fine but now having an issue with just printing black. I normally only print color prints so never noticed it. I tried everything that I looked up online to see if it was clogged. I did all the maintenance. Any suggestions. Trying to make a mug for Easter. My black prints are streaking. When I do the test prints there are breaks in the lines.

[@AngieHolden]

Did you print a nozzle check page? I would say check out my video on fixing clogs and lines in the print.

[@kimengland6604]

Have you done the inside bottom of mug? I’m looking for that also!!

[@ruthpickens8101]

Thanks!!! Where did you get your shrink wrap? I’m not finding where you did. Thanks again

[@AngieHolden]

Supplies are linked in the description below the video.

[@AllyssaButhmann]

Do you think that using a silicone sublimation wrap is a good alternative to the shrink wrap?

[@AngieHolden]

Not for this process. It will not go under the handle.

[@amelianavarro316]

@@AngieHolden what if you cut the silicone wrap to the template shape and use that?😊

[@vmg1715]

Hello, thank you for the video! How might I find the template used? I tried the link but I don't see the template. thank you!

[@AngieHolden]

There is a link in the description below the video. You open that up and put in your name and email. The files are then sent to your email address. To get the link, head to the description below this video. On computer, scroll down and click show more. If you are on mobile, you may have to swipe up on the video or click the arrow to expand the description.

[@vanessagonzalez1210]

O thank you so much, I got it!

[@KarenYauney]

Thinking of getting a mug heat press. Do you have to use sublimation? I really dont want to buy more ink or even another printer. Please let me know..Thanks

[@AngieHolden]

You could use it with Infusible Ink or something like that.

[@arrickasanders4541]

What about using a heat gun for those of us with the tumbler press?

[@AngieHolden]

I have not had luck using a heat gun for sublimation.

[@LifetimeCre-8StudioLLC]

Hi thank you for this video. I noticed that you said 393 for your temp put on the oven it's says 383. can you please tell me the correct time?

[@AngieHolden]

I think it was 385 actually.

[@LifetimeCre-8StudioLLC]

@@AngieHolden thank you

[@AndyMiller02]

Which shrink wraps do you use? The link isn't working and I've yet to find one that works for me. Thanks.

[@AngieHolden]

Try this: kzbin.info/www/bejne/foe0Z2ZmjdeUbKs

[@SavannahBolden-j2r]

The instructions for the PYD Life oven tell me to bake a mug for 11 minutes at 392 degrees and you only baked yours for 7 minutes. Does that time change with different brands of mugs?

[@AngieHolden]

It can vary with your setup and the brand of mug. I feel these look really good so that is what I go with.

[@pamtilsonrodgers2825]

Good video. Thank you for sharing it.

[@AngieHolden]

Thanks for watching!

[@jules1990]

I'm in the UK and pulling my hair out. I use Cricut design space and I bought some sublimation mug paper 3.5" by 9". I set my printer as user defined for the paper measurements 3.5" by 9" and page orientation to portrait. What's confusing me is the paper settings in Cricut when I send it to make it. Do I set this as A4 document, or legal document. I tried setting it to A4 then loading my mug paper in my Epson printer but some letters are missing. 😢

[@AngieHolden]

If you want to use that small paper, you will need to use another program that is NOT Cricut Design Space.

[@jules1990]

@@AngieHolden thank you I'm going to try Sillouette and see how I get on. I wish I had your talent 😏

[@veronicaedwards6368]

this is an amazing thing thank you so much.!! Angie I watched and downloaded the free canva template with hello gorgeous wrap but I use inkscape can this wrap be utilized on it ?

[@AngieHolden]

No sorry! I was trying to make have an easy way for people to drag and drop an image and that is the best way I know.

[@veronicaedwards6368]

@@AngieHolden ty so much. I have learned so much from you and I've only been following for several months

[@rickandnannettequalls5502]

May I ask a question? Could you trim down a thin silicone wrap so that the shape mirrors your template? It seems like the silicone wrap heats up significantly when I use it on tumblers in the cricut mug press., so would it be hot enough to activate the sublimation ink under and around the handle, even though the handles sticks out of the press??

[@AngieHolden]

I don't think that would work? I don't think you would get the pressure or heat needed.

[@tinaazolino1836]

You must have been reading my mind on how to do a full wrap. Thank you, great video. Have you tried any of the silicone wraps instead of the shrink wrap?

[@AngieHolden]

I have not found a silicone wrap that goes under the handle tightly?

[@JelscreationsNmore]

i cant them to size right when i print them what am i doing wrong and is 8.5x11 the paper you use i have tried both sizes

[@AngieHolden]

They should work on regular paper. Sounds like you need to check your printer settings. Be sure that actual size is picked or print at 100%. NOTE: If you are using Cricut Design Space as I have shown you may need to print on 8 1/2 x 14 paper if you are doing two per page.

[@rosekirk5000]

Hi Angie. I love your videos. I do have a question. Where do I find the blank full wrap template for the 12 and 15 oz mugs? Thank you

[@AngieHolden]

Get the free full wrap templates here: angie-holden.ck.page/f843b51e0c

[@marybcreative]

Hi - I couldn’t get the template to ungroup on any of the files. I ended up slicing one off, but then it did not cut around the handle. Any tips?

[@AngieHolden]

Sounds like you didn't upload the SVG file. Pick the file that is an SVG when uploading. It may look like an HTML file on your computer.

[@marybcreative]

@@AngieHolden Thanks for letting me know - I had downloaded the wrong version.

[@connieroedig9959]

Hi I was wondering how would I use these templates in Canva I pay for the pro. I'm just learning how to use it.i don't like to print from cricut design space. The colors aren't as vibrant

[@AngieHolden]

Try this: kzbin.info/www/bejne/oZfQq6WCo8ians0

[@darlenevenus4398]

what size is your all around mug template? When I down loaded it, it came out super big. What is the correct size?

[@AngieHolden]

Ugh. Design Space does this to me all of the time! Try sizing to the height of the mug you are using.

[@lisaschmitt5813]

Angie, I have the 15 oz with the colored handles and inside. I cannot get it to fit around the handles and in between no matter what I do. 😒 HELP!!

[@AngieHolden]

I have two sizes. Are you using the larger one?

[@lisaschmitt5813]

Yes,I will have to work on it to try and make it fit. I will have to resize it until it fits. Thank you for getting back to me. Sorry it took so long for me to respond. I will reach out again if I have any questions or issues.

[@Team300C]

@AngieHolden not sure what I am doing wrong, but it won't ungroup in Design Space.

[@AngieHolden]

Sounds like you might have uploaded as the wrong file type?

[@Team300C]

@@AngieHolden thank you…that’s exactly what I did 🤦🏼‍♀️

[@carollehrer]

Thx. I’m have trouble finding the template.

[@AngieHolden]

There is a link in the description below the video. On computer, scroll down and click show more. On mobile, swipe up on the video or click the arrow to expand the description. The link is near the top and just click it and enter your info. The file will be sent to your email.

[@zaidtareq1016]

I love this

[@steveingersol8660]

Hi Angie. Thanks for the full wrap mug template. Do you know of any reason why my design turns pixelated when I lay the template on top of my design and do a slice?

[@AngieHolden]

Make sure you are not enlarging your image to fit the template.

[@steveingersol8660]

Thanks Angie. Great videos. Fantastic channel. The best I've seen.

[@allisonbowdon9466]

Hey Angie I have the Saltgrass sg500 but I only have the one drawer for paper. How can I do the 8by14 paper print

[@AngieHolden]

You just extend the drawer. There are tabs on both sides that you open then the drawer comes out further. I may do a short on that!

[@allisonbowdon9466]

@@AngieHolden thanks mam I figured it out thanks you though

[@caroltrimble2738]

Beautiful

[@AngieHolden]

Thank you!

[@Jessica-wl3of]

Thanks. Question.. will the shrink wrap melt in the convection oven? I've seen people say it does

[@AngieHolden]

Not if you get a good quality shrink wrap. As you saw in the video, mine was fine!

[@Jessica-wl3of]

​@@AngieHolden can I do it without shrink wrap? I bought a ton of cases from cricut. I don't use my cricut often because I don't understand it. So I'm going to follow all your steps for your template. Does it come up automatically the size I need? In Canva it did not.

[@FullMoonLoonDesigns]

Thank you so much!

[@grandmakitty1365]

Wonderful idea. Question do you have to use an oven that is exclusively for sublimination only?

[@AngieHolden]

You never want to cook food in any oven that has been used for sublimation. However you can use a small convection oven or even an air fryer. You can see more here: kzbin.info/www/bejne/i3uwhYZ6gsd2jcU

[@judyblaise1639]

Great video

[@sworley1956]

OK I tried this and it didn’t work for me. I don’t know what I’m doing wrong. I use a shrink WRAP and I don’t have a sublimation oven. I put it in my confection oven for 400° for 12 minutes and it was very very faded. What do I need to do?

[@AngieHolden]

Faded all over or just under the handle? All over would indicate that you didn't get it tight. Also 12 minutes sounds REALLY long. Not sure why you need that long?

[@sworley1956]

@@AngieHolden I tried it again and it work. 12 minutes was perfect for a convection oven which is what most videos say to do for ceramic cups. For a actual sublimation oven maybe your 7 mins time is for that.

[@clairemeier3605]

Wait, so have to print this on legal size sublimation paper, right? The link to the paper you put in the description is letter size which is making me second guess myself.

[@AngieHolden]

Yes legal size. Sorry about that.

[@clevesque6348]

These look great! Did you try painters tape wrapping method?

[@AngieHolden]

I do not use painter's tape for wrapping. I like the shrink wrap better!

[@msmello925]

Because I'm so late to the party, the link for the shrink wrap you use isn't working. Can you tell me which brand/size you use?

[@AngieHolden]

One of the companies I use went out of business. But I do talk about shrink wrap sources here: kzbin.info/www/bejne/foe0Z2ZmjdeUbKs

[@joycemariepopp1311]

Will this technique work using the Cricut Joy Xtra?

[@AngieHolden]

I think this particular one may be too long for the xtra.

[@nahnisjourney1406]

Is it possible to sublimate the handle as well?

[@AngieHolden]

Generally no because the coating can be so inconsistent there.

[@nahnisjourney1406]

@@AngieHolden Thank you very much.

[@miabettano]

HELLO Angie I just bought on clearance half price, a brand new Emeril Lagasse Power Air Fryer 360 Oven, My question is can this be used as sublimation oven on a large 20oz coffee mug using sublimation paper?

[@AngieHolden]

An air fryer can be used for sublimation but you cannot use it for cooking after it has been used for sublimation.

[@miabettano]

Thank you, I did do it using a lg 20oz coffee mug however I had some ghosting😞 can you please tell me the correct temperature and time setting for the oven. Thank you Roy.

[@JourneywithNiq]

hello, once i upload the template to my cricut i can't ungroup .

[@AngieHolden]

Upload the SVG file not the PNG file. Sounds like you are uploading the wrong file type. The SVG file may look like an HTML file on a PC.

[@sherylfalls]

I have the handle part down really well but my images keep,coming out light it is a 3d flower print that I do at 375 for 4 min

[@sherylfalls]

I forgot to add I am using an air fryer

[@AngieHolden]

Is the shrink wrap melting or pulling away?