Siser Juliet: Everything You Need to Know

Let's unbox, setup, and use the new Siser Juliet cutting machine. See how it works plus take a peek inside of Leonardo Design Studio for designing images. You can see how to cut with and without a mat as well as how the machine does print then cut. Learn everything you need to know about this machine and if you want to purchase it! If you already have purchased the Siser cutting machine, use this to setup and start using your machine.
Links below may be affiliate links.
Buy the Siser Juliet:
Michaels www.tkqlhce.com/click-7521484-11846545?url=https%3A%2F%2Fwww.michaels.com%2Fsiser-juliet-high-definition-cutter%2FD679625S.html
Heat Transfer Warehouse www.thecountrychiccottage.net/siser-juliet-aff
Siser mats: www.anrdoezrs.net/click-7521484-11846545?url=https%3A%2F%2Fwww.michaels.com%2Fsearch%3Fq%3Dsiser%2520mat
Siser blades: www.tkqlhce.com/click-7521484-11846545?url=https%3A%2F%2Fwww.michaels.com%2Fsearch%3Fq%3Dsiser%2520blade
Other videos you may enjoy:
Siser EasyColor DTV kzbin.info/www/bejne/nX3IqpuAZcaVjq8
Siser Brick HTV kzbin.info/www/bejne/o5_Nk3ylrNqLhK8
Be sure to follow me on social as well!
Instagram angieholdenmakes
Facebook AngieHoldenMakes/
Cricut Facebook group groups/cricutlove/
TikTok www.tiktok.com/@angieholdenmakes
Join our Cricut community on Facebook: groups/cricutlove/
#siser #siserjuliet #sisercuttingmachine
0:00 Introduction
0:30 Where can you buy
1:06 Unboxing
2:48 Plugging in cords
3:18 Size of machine
3:47 Powering on
4:05 Machine interface
6:08 LED lights
6:34 Moving the blade
6:49 Moving pinch rollers
7:23 Adding the blade
9:05 Test cuts
10:47 Leonardo Design Studio
14:08 Cutting HTV without a mat
16:28 Cutting width
16:56 Print then cut
21:39 Siser Juliet versus Romeo
22:10 Cut sizes
22:47 Cut settings
23:17 Blades
23:42 Mat orientation
24:18 Commercial vs craft cutters
25:23 On mat vs matless
25:46 Print then cut size
26:14 Other questions
27:32 Wrap up

[@edievh01]

After two Cricuts and almost buying a Silhouette I almost cried when I saw how accurate it cut my stickers after soooo many failed attempts and wasted supplies.

[@skyekelrose7530]

Hi! I feel your pain😅 I have been through 5 Machines. 3 Silhouettes, 2 Cricuts and a Brother Scan N Cut so I am... terrified, for lack of a better word, to try yet another... rather pricey, machine. Has this machine been worth it for you? Thanks in advance!

[@birdfingers354]

@@skyekelrose7530I'll answer that - Yes! The Juliet feels more like a pro level plotter than the competitors

[@dingus.by.design]

as someone who’s mostly familiar with working with industry machines, specifically rolands, I think this is the first hobby cutter I’d consider getting. the fact that you can dial it in at every step is very nice, precision is key. I definitely think this machine is for a more advanced market than some people realize 😅

[@AngieHolden]

Definitely more advanced!

[@pamelareed368]

Excellent video - great explanations of how the Juliet works. I just got mine!!

[@lashundarice5869]

My question was already answered. It’s all about the print then cut. Thanks

[@ingagreen317]

Thanks for sharing this unboxing video, this also reminds me of my Brothers Scan and Cut. I also have that machine and a Cricut Maker, for now I will stick with what I have.

[@setiroculus]

Placed an order for mine tonight. I'm looking forward to seeing the blade options that will be released. Would be nice to see you explore other materials that it's able to cut.

[@marias.learningallican3892]

Thank you! Looking forward to learning more in up coming videos.

[@AngieHolden]

Awesome, thank you!

[@LifeConmigo]

Thank you Angie! I love that Siser heard our frustrations with the Cricut Print then Cut limitations and gave us what we been asking for. The only cons [IMO⁹] I see with this cutter is 1. the lining up with the rollers especially since everything looked flushed. 2. The moving of the blade to the box, I feel like it would be easier on us all if the cutting blade would automatically go to that spot on it's own. 3. looks like alot of new owners are going to cut off vinyl due to how quickly the blade housing moves .

[@IraQNid]

I heard about this by accident in one other craft cutting video. Then I saw it in the suggestion on KZbin. You did a good job of going over the key features for the machine. It sounds about as loud as a cameo. It seems to be pretty fast. Certainly faster than the others like Scan N cut, Cricut, Cameo. I do like that it has a built-in camera to help align the design to the printed material or just the material itself. In this way it is something like the usefulness of the Scan N Cut.

[@dsmith199]

WOW! An operation manual! What a novel idea! Circuit - pay attention!!!!

[@ashleyhickey6451]

Super helpful!! Thank you! Just got mine and was looking to see how long it could cut, this answered that and more. Excited to start cutting!!!

[@AngieHolden]

Glad it was helpful!

[@leelameka]

Thank you! I think Ill be getting one : )

[@darlahpotechin1668]

thank you Angie - you are great to do this

[@AngieHolden]

You are so welcome!

[@f3ndanez]

Thank you so much! This video was so helpful!

[@heidifris4880]

Thank you Angie - I always trust your reviews. In all honesty, the only things that make me want this more than my Cricut is the large print/cut options and possibly the pre-sets for the price. I'll keep waiting on Design Space to hopefully make that print/cut larger - :)

[@AngieHolden]

Crossing fingers!

[@j.ferrari5443]

I like the larger print then cut feature

[@ricardiagnostics]

Great video Angie Thanks

[@AngieHolden]

You’re welcome 😊

[@kcastillo0319]

Thanks for such a thorough review. I have a Scan N Cut, and this seems like a more manual version of it, geared towards vinyl, obviously. For the price, thinking Scan N Cut gives more options. Was curious about this, so thanks again. Hoping you will be able to get a Loklik and review it.

[@Liviarzita]

Great video, I will wait until you compare the two machines before I even think in buying a Juliet. So far I love my Cricut.

[@nanette28]

I recently got one specifically for the larger print and cut capabilities. However, I didn’t realize how much tweaking we have to do ourselves before we can even start that process. Ugh 😩 I wish that was something more automatic that the machine would do itself. Maybe that could be part of Siser’ upgrade? In any case, thank you so much for this very detailed and amazing video. I definitely look forward to seeing more about the programming for it to help me navigate through.

[@creandoconpaola]

Wow im so happy!!! This is incredible!

[@AngieHolden]

Thanks for watching!!

[@ellyh3868]

Thank you Angie ☺️ Interesting ... Waiting for more info as you get into the software.

[@AngieHolden]

More to come!

[@eavivijulin8587]

Hey i just buy this Juliet cutting, you explain it so lovely. now i cant vait to get the mashine.. it sems like very easy to use. gonna be fun. THANKS and Hugs from denmark

[@AngieHolden]

Have fun!

[@maryjanewill3056]

Great video!

[@AngieHolden]

Glad you enjoyed it

[@knitsewfancy]

Sounds like a Silhouette Cameo when it is cutting on the video. I would love to hear it in person. Everyone says it is quieter than Silhouette. Thanks for the in-depth look!

[@darlahpotechin1668]

much quieter than cameo or cricut and so fast. think that microphone amplified the sound

[@AngieHolden]

Microphone does definitely amplify the sound. I do think it is quieter in comparison but that is hard to measure!

[@LindaEnsor]

Today (August 23, 2023), you can purchase the Juliet from Brilliant Vinyl for $299. I don't know how many units they will have for that price, but getting such a solid machine for $200 less that MSRP seems to be a great deal.

[@ImADish]

Thanks, but darn. Obviously missed it. Not sure I'll wait though -I want it THAT bad. Ha

[@pattishelton3169]

I was thinking it is a little similar to the Brother Scan n Cut. A lot to learn but nice machine.

[@TYJ419]

Great tutorial Angie!! Thought I wanted one but now I don't. Don't like that you have to move the blade in a specific location for the print and cut. Also, when not using a mat you have to make sure you have a straight cut edge then feed it through and then you have to make sure the edge even. That's a lot to tweak before cutting. Tracey

[@TYJ419]

OK your video was the first I saw on this machine 9 months ago, and now that I've seen more about the machine and the great work they are doing to expand the software I had to come back and say I wish I got the Juliet! I'm now kicking myself that I got the Solo Starcraft 9 months ago because I don't care for the software so much. Tracey

[@ImADish]

@@TYJ419 Hey, thanks for posting back. I'm looking at the Juliet now.

[@TYJ419]

@@ImADish I did end of getting the Juliet and really like it! I'm starting to learn the software though as I am a long time Silhouette user and absolutely love.

[@ImADish]

@@TYJ419 Okay, I'm sold! Thanks for saving me time and money. The software looks very intimidating, but I think we'll be much, much happier in the end.

[@nonna1207]

Great video as always for this interesting new machine. It peaked my curiosity so I was looking for more details about what materials would be compatible such as wood, fabric, etc. I went through dozens of sites which did a poor job on that particular aspect. Before I invest, I would need all the info like other cutting machine brands offer. Regardless, you did a wonderful video for overview because you did make me curious enough to consider a future purchase. Thank you for keeping us informed about products out there. It has helped me greatly.

[@AngieHolden]

Until they release all of the blades for the machine, I can't really list all of the materials it will cut.

[@createinspain]

The GENERAL rule with cutters other than those that specify otherwise, is that if you can cut it with scissors, you are good to go. None of the craft machines do anything detailed with wood, just basic shapes, often needing multiple passes. Fabric will depend on type and stability. Usually crafters apply stabilisers to fabric to ensure it does not pull and move during cutting. You can cut things like thin, flexible plastics, make stencils and templates, that sort of thing. If you want to cut acrylic, plywood etc, you need a CNC not this kind of plotter. CNCs use routers and can cut wood, metal etc. They come in many sizes, from desktop to VERY large ones for wood shops.

[@kcastillo0319]

My thoughts - go with Scan N Cut but use Silhouette Studio software for anything more than basic. Brother Canvas Workspace is good for basics. The Scan N Cut is pretty awesome without any external software - lots of inbuilt options and designs. I think they start around USD$300

[@tanvidamani]

Hi Angela I love your videos. I watch them just for fun even though I'm not a crafter (yet... 👀)... Just a note: deutsch (doi-ch) is german not dutch (not that it really matters, but for future reference)! Thank you so much for all your wonderful videos! You do such an excellent job every single time!

[@AngieHolden]

Yep! I realized that later. In my defense reading upside down on camera in other languages is NOT my specialty.

[@tanvidamani]

@@AngieHolden that is 100% true. Hats off to you for all the hard work you put in.

[@julieann5196]

Thanks for all the info Angie. It seems pretty nice but for me it seems a little expensive and I don't want to learn anything new. I'm pretty happy with my Explorer Air 2.

[@lisahughes3012]

i like your video😄

[@ryanokeefe7351]

Great demo! Reminds me of sure cuts a lot and original expression machine. Yes I’m that old in the game! Also, my interpreter side wants to say “Deutsch” is German 😊

[@AngieHolden]

Ah thank you!! I was also reading upside down in that portion and in other languages. It was not the easiest portion of this video!

[@ryanokeefe7351]

@@AngieHolden girl you would hang upside down to bring us all the “T” on a new item. Not faulting you at all. I was an interpreter for over 20 years in ASL and took 3 years of German in school. Helping my sister in crafts out from afar! Haha

[@doen.8724]

Yep, Deutsch means German in Deutsch😉

[@LisaVornhagen]

Seems like a pretty cool machine. It seems like there are an awful lot of settings to go through before you actually get to cut the design, though. I'll never be able to afford a machine like that on my income, but it was really interesting to see how it works.

[@TheBkdot]

Keep lookout on Mercari, OfferUp, eBay, Facebook market just scored one for under $200

[@doodleschattin1268]

Please do more video about the Juliet cutter many of us already have this cutter and there are video about using it.

[@AngieHolden]

I am working on filming one now on the software!

[@oricle81]

Thanks for the video, Angie! Interesting to know the differences! It reminds me a lot of my Brother Scan N Cut but I'm curious to learn more about the software. I must admit, the Cricut software is great, especially the ability to cut multiple layers without having to hide other layers before cutting. I do like the aspect of being able to cut without a mat like Cricut. Anyway, I wonder if we will get them here in Australia? We get Siser vinyl stocked here so I would imagine that we'll get them eventually. Thanks again!

[@AngieHolden]

I would guess so but I haven't seen anything about which countries are when!

[@darlahpotechin1668]

they are in Australia already

[@micnitram2006]

Seems like it’s the offspring of Cricut & StarCraft Solo. 🤔 I’d love to see a comparison of all three!

[@martedrilen1447]

Any info on how much cutting pressure it has? Would like to know how it compares to other machines when cutting leather, balsa etc. when they come out with other tools/blades.

[@heatherspencer3627]

Hi, Thanks for a great video. Two questions : How does the Juliet work with transparent photo paper for print and cut ? Can I lay out a full 8.5 x 11 page in photoshop, save as a png, and import without having to re-manipulate the files ? Thank you.

[@wendyvalerie6624]

Nice machine pink and chic. Is its design space fantastic.

[@laurischlierman]

Haha, this thing seems like it was designed by every disgruntled Cricut and Silhouette crafter. I actually would LOVE to get my machine to start cutting from the bottom left!

[@wendyvalerie6624]

Lady Angie, thank you. Let's see what will take place with all these cutters. Certainly a very good review. 👍 Can it write like in the design space nicer and more complete than cricut

[@AngieHolden]

You can write with pens but I haven't tested those yet!

[@createinspain]

@@AngieHolden The pen holder is for their Siser pens, it will be interesting to see if any other pens fit!

[@sharijd726]

Great video introduction to this new machine. It does seem to have a lot of the same features as the Brother Scan and Cut. I have both a Cricut and the Brother machine. To me, in my opinion, the Cricut is much easier to use. My Brother machine has probably only been used a couple of times. This machine is pricy, think I'll stick to my Maker for my project needs.

[@antoinettemitchell2888]

I agree I have maker and brother as well

[@lucyleo2912]

Hi, I’m looking for machines that do the scan and cut features. I have a brother but it doesn’t always pick up the images from a pre printed fussy cut sheet. Do you know any machine that is good for this? Ty

[@busyhandsveronica]

Thanks~ Wish I could have this one. I am stuck with Cricut maker.. $$

[@julieberry7718]

Excellent! How small and detailed can this machine go?

[@clairebrough5180]

I like how it ghosts when you’re resizing, I wish Cricut would be able to do that

[@margenek]

Hopefully Cricut will up their game. Good competition always lights a fire. Seems like a cool machine, though. Wonder how difficult the software will be. May be the point of decision.

[@GodspellRadio]

Hi Angie! Thanks for the video. I found it very informative. I just picked up my Siser Juliet tonight. I haven't totally unboxed it yet. I wanted to look at some video's first. I wanted to ask if you know anything about cutting rhinestone templates on the Juliet. Did they show you any of that in Italy? Thanks again for another great video!

[@AngieHolden]

I actually didn't go to Italy. I have not seen anyone use it with rhinestones but that doesn't mean it won't do it!

[@gerilynne1955]

Nice.

[@AngieHolden]

Thanks!

[@TaniaGail]

Working with the Juliet to try and get a die cut and a kiss cut on the same project. It is a bit challenging at the moment.

[@createinspain]

You'll get there. It takes a different kind of mind set to the usual craft cutters.

[@dianachau7857]

Is there a video for die and kiss cut? Which is better? Thanks

[@createinspain]

@@dianachau7857 Die cutting means you cut all the way through the material, kiss cut is for doing vinyl and stickers etc where you need to cut through the top surface and keep the backing in tact. The video above demonstrates die cutting.

[@bbsunsumg1629]

Yo tengo una cameo 4 sencilla.. y creo que me siento más cómoda. Se aprecia súper chévere... Rápida. Pero y que pasa si al primer corte no me corta el material...?.. cómo lo pongo de nuevo para que vaya igual... Si hay que programarla manualmente, creo que es una desventaja!!

[@lashundarice5869]

Mine will be here Friday

[@suzannekimberl6650]

Did you happen to get any Michaels rewards points when you made your purchase?

[@lashundarice5869]

@@suzannekimberl6650 yes I got a $50 voucher

[@suzannekimberl6650]

@@lashundarice5869 Thank you, I have called Michaels Corporate office twice, send them a copy of the receipt and still no response. No one seems to know anything when I call, they take my info and say they will forward it on to someone. At least I know they give it but for some reason I didn't get mine.

[@creandoconpaola]

The htv for the Romeo is already out on Michaels is super big!

[@darlahpotechin1668]

how big is it?

[@AngieHolden]

Oh good to know!

[@creandoconpaola]

@@darlahpotechin1668 19.8" x 60" (50.29cm x 152.4cm)

[@amberstewart3117]

Is this easier to use for print then cut vs cricut? I want to print with NO white left in the outline. Will this fix that issue?

[@nikkihamilton8951]

Side by side Juliet machine vs cricut Maker 3 best of my machine for my money

[@MG-xo3ve]

What is the largest print and cut size for the Romeo ?

[@tc19872]

For cutting without the mat, is the vinyl a smart vinyl like cricut joy uses or just regular vinyl like you would use on a mat with a cricut explore air 2?

[@AngieHolden]

You can literally cut ANY vinyl without a mat on this machine since the rollers move.

[@joankirsch1430]

If you are cutting a roll and machine starts at bottom left then you would most likely need to feed material from the back , right? And roller attachment would be on the back. I don’t see using this machine on a shelf like I do my Cricut but having to place it on a table

[@AngieHolden]

Or feed all of that through first which wouldn't be fun! Correct the roller I have seen pictures of looks like you can use from front or back.

[@Bullitt2410]

What else can it cut besides paper and vinyl? I know you mentioned possibly fabric in the future. Will it or the Romeo compete at all with the maker 3?

[@AngieHolden]

You can cut anything with it that would use a fine or deep point blade at the moment. As they release more blades, the list of materials will grow.

[@JulieWorthington]

Have you done any more videos using this machine? I'm thinking about this for my business in the future, but would like to see you using it more first. Thanks

[@AngieHolden]

I have not. I have found it a bit complicated and making videos that break it down is challenging!

[@safrahanan1571]

i bought cameo 4 in april 2022 , and i need another one cause my project is starting to grow , and this machin is realy cool it have no sound , so i was wondering how i can commend it ,????

[@kimberleybeirnes3642]

I am curious most about the print aspect in regards to sublimation for tumbler wraps. I currently use silhouette but the interface of the siser program is so close to Design space. Is the program free?? hmmm

[@AngieHolden]

I need to look into this!

[@j.ferrari5443]

Can you use print them cut with maker 3

[@weronicad1581]

Did you try pens to draw/write with Juliet yet? Your video with Joy pens help me.

[@AngieHolden]

I have not yet!

[@darlenekrisak2962]

Nice! Wonder if you can use the software without having a Juliet to do printing for sublimation…. Hmmm

[@AngieHolden]

Perhaps! I am not sure as they had to send me a copy of the software before it was released to the public to film this!

[@createinspain]

You have to have a machine registered to use the full software and the demo version only saves to Leonardo format, so no.

[@artistlofts726]

Does anyone know when Cricut is releasing their new machine?

[@camsmyth101]

A cutting machine without a preset card stock setting! Wouldn’t that be the most popular material used in these type of machines ?

[@AngieHolden]

Not necessarily. Depends on what you make.

[@VC-id1ho]

This seems to have too many steps to actually start cutting. There doesn't seem to be any standout feature that would convince me to switch from my Cameo 4 pro to something like this. The Cameo 4 also cuts with or without a mat and it also cuts rolls indefinitely. The Cameo is also very easy to use compared to this, it's also smaller and honestly a much better looking machine. Thank you for the video!!

[@znycelondon5313]

Agree100%. I am deciding about buying a machine. Still believe I will choose the silhouette cameo pro . 😊

[@nymincho]

Isn't cameo pro worst than the plus?

[@bensilva20]

Any problems using holo or glossy sticker paper? I know my cricut struggles to read anything with a nice shine to it, thanks in advance

[@AngieHolden]

That is a good test! I will try that!

[@bathtimeboutique2594]

For mugs, Tumblers etc? Mine just arrived today haven't even opened, just wondering, I do a lot of mugs and tumblers.

[@AngieHolden]

You don't have to have a cutting machine to do sublimation on mugs and tumblers.

[@juliegayson7947]

Hi am loving this machine but can I send to sawgrass printer. Thank you

[@AngieHolden]

Sure you can!

[@janetharris9291]

This machine is being sold for over $400. I have not seen anything that would make it more valuable then other popular machines. Also. How does it work with card stock

[@dkquick72]

Top left….bottom left… it’s like going from a pc to a Mac or traveling back and forth between the US & UK! 😂

[@AngieHolden]

That is how I felt the ENTIRE time I was filming this. I was so confused!!

[@blessedeverydayofmyl]

On the print and cut, is it only white paper like cricut or can you use colored paper as well?

[@AngieHolden]

Good question! I need to test that!

[@elizabethk8938]

Angie, can you score with the Juliet? I'm having a hard time finding any tutorials or information on this.

[@AngieHolden]

I have not seen a scoring tool come out at least yet.

[@candidlycreative]

Nope, I'll stick with my Cricut 😊 Great video though Angie, thanks!

[@lucyleo2912]

Hi, can you scan in a pre printed cut apart sheet, that normally you would fussy cut.. And get the siser to scan the full sheet and do the fussy cutting for you, ty

[@AngieHolden]

I was thinking about this and I need to try it!

[@lucyleo2912]

@@AngieHolden I have asked so many different people and have so many different answers lol.. Please please try it, I’d love to know, and if you do please reply here so I get an email…ty ty ty ❤️

[@antoniobratton4692]

Can you use silhouette studio from a cameo 3 to send designs to this cutter?

[@AngieHolden]

Currently no but I have heard that they would like to open it up to other software.

[@cherylstrange7969]

Looks a lot like the Solo

[@jtech8959]

does the length of material matter? if i am only doing eg 5cm height font what length material should go in? do i need the material to cover the entire mat? or can i go use 7cm length to leave enough room to cut? Assuming i would also need to resize my layout in the software. I just purchase my siser tonight, so I have yet to do my first cut. 😊

[@AngieHolden]

You can just use the size you need to cut out your item.

[@lenoramcglown]

great machine Angie..but for me $499.00 for a machine that only cut faster than my Silhuette and my Cricut Maker..i dont see a pen tool scoring tool..just cut faster like my lazer cut plotter...thanks for your time in making this video

[@AngieHolden]

You can add pens. I haven't seen a scoring tool at least yet!

[@AliciaEastLyme]

Can you export designs like you can with silhouette business? Also can you simply print your designs without the registration marks?

[@AngieHolden]

I will have to look into both of these questions as I haven't tried yet.

[@ivyaubry]

@angieholden Do you have a tutorial on doing KISS cut on the Siser Juliet?

[@AngieHolden]

I do not.

[@tinaupnorth]

Hi Angie. I was just watching this again. I noticed you, and other influencers, haven't used their Siser machines since unboxing. Do you not like it?

[@AngieHolden]

I do like it however I find it a bit confusing to use. I was hoping for a simpler software update. I am just not sure my audience would like it the way it currently is.

[@ImADish]

Update? And has anybody figured out a way to score with the Juliet? I really (really, really) want/need that. I do know a tool is supposed to be coming, but I was curious if the blade could be turned upside-down and pressure/speed adjusted for that?

[@AngieHolden]

I haven't seen anything yet!

[@brendabatstraweel737]

Angie, are you making more Juliet videos?

[@AngieHolden]

I have been working on some but it is more complicated then I would like it to be so I am attempting to simplify things.

[@habdelk7522]

Can you design/save svg files in the software? And possibly share the file with others?

[@AngieHolden]

I haven't tried anything like that yet!

[@blessedeverydayofmyl]

In the software are the graphics free or is there a monthly fee to use them?

[@AngieHolden]

Right now they are free but limited. I have heard that they will have a subscription for some graphics similar to Cricut.

[@duhneese525]

Can you use any brand of vinyl or do you have to use siser and can you use other brand vinyl or does it have to be “smart” vinyl?

[@AngieHolden]

You can use any brand.

[@meluv2cut]

I’ll be curious how everyone handles the mat buckling. The middle roller causes the mat to buckle with repeated use. If you reuse one of those mat while cutting smaller pieces of vinyl it causes scratching. I’m not sure if moving the roller to edge is the solution or what others will do to solve. I was cutting a lot of card stock and stickers.

[@AngieHolden]

Interesting! I will look out for that! I noticed the roller left black marks on my mat which was concerning.

[@createinspain]

This middle roller is an issue that Siser are currently looking into. I think that as a vinyl company, they were less aware of the implications of the third roller for paper crafters. There is, I believe an adjustment to the roller pressure and if that is the case, lowering the pressure may improve that matter. However, having a wheel travel over your card stock, marking it and possibly making it adhere to the mat in ways that are not desirable, needs to be addressed.

[@meluv2cut]

@@createinspain thanks for the info. It does it with htv and perm vinyl as well. The constant use of the mat causes it to buckle. I use up my scraps but ruining 3 mats to get my project completed was aggravating. Hopefully it will get fixed.

[@createinspain]

@@meluv2cut Hope so

[@lynnebizlyne436]

@@AngieHoldenHas this situation been corrected yet?

[@Mollydogdesigns]

Can you make stickers using all the paper vs the Cricut that limits the size ( 6.75x 9.25) Thanks

[@AngieHolden]

Correct! You still do need those small lines I show in the print then cut section of this video. But the area is larger and uses more of the paper.

[@SABan-bh4hi]

Angie says in the video when talking about print and cut that you can use the whole sheet.

[@lindasmith4515]

I'am not computer good so I will stay with my brother 650 .I can use it easier .I love it it is easier to used .But if I was better with computers this would be a nice machine .

[@lisad5963]

Will the software work to make tumbler templates?

[@createinspain]

At the moment the software is not fully functional re designing but if you have SVGs to use, no problem. (I am thinking you are meaning decorative vinyl?)

[@user-nw8yi1ny8j]

Can you cut thin foam sheets at 1mm ???

[@AngieHolden]

Sorry not sure!

[@abglennie79]

$700 in Australia

[@wileycovington4497]

Can it cut acrylic and woods? If so, at what cm?

[@AngieHolden]

They have not released a knife blade yet for this machine which would be needed for that.

[@bathtimeboutique2594]

How is this machine for sublimation? The software etc.

[@AngieHolden]

You don't need a cutting machine to do sublimation at all. You could use the software to print if you would like. Then it could be used to cut HTV or EasySubli for sublimating on.

[@sandraluckey8069]

Do this machine cut larger than 12 x 12?

[@AngieHolden]

The Juliet cuts right at 12 inches wide (a little wider) but as long as you would like.

[@anisbutler]

when will the Romeo come out?

[@AngieHolden]

I think November but I am not sure.

[@gotcha2436]

Hi, does this machine emboss and deboss?

[@AngieHolden]

They don't have those functions yet to my knowledge.

[@Lyndajohnson89]

Seriously considering the Juliet over upgrading my Maker to Maker 3. How do I find out what it will cut e.g. fabric, leather, faux leather, etc.

[@createinspain]

At the moment, the information is scant on materials. With the blades it is coming with, you will be limited to anything you can cut with scissors, fabric needs to be stabilised normally.

[@Lyndajohnson89]

@@createinspain thank you

[@AngieHolden]

Currently it only has a fine and deep point blade so you will be limited. Once more blades come out, the material list will grow but I don't know what that will be yet.

[@Lyndajohnson89]

@@AngieHolden thank you. Got a bad case of FOMO, but I’m going to wait, for now