NEW Cricut Card Mat for Explore and Maker Machines: Ultimate Guide

[@annettebecker9719]

This caused me SO much frustration today trying on find a card to make for my Mom today.

[@LadybugLair]

Angie, you totally saved my "bacon" and....sanity, over trying to figure out why I couldn't get my 5" x 7" card base, that I created myself in CDS, onto the 2 x 2 card mat. Then.....I discovered your awesome (as per usual!!) vid. about the card "sizes" to use. Thank you sooooo much, Angie!!! ❤

[@AngieHolden]

Happy to help!

[@RavenDesi]

Thanks for all of your work on this! But this seems like too much to make some cards. I've been making cards for years without this...LOL

[@AngieHolden]

Definitely! Some people like it but you don't have to have it!

[@LynneBWilson]

This is the best Cricut video I have seen ever! Thank you for being so clear in your explanations and your demo. I have subscribed. Thank you!!!!

[@AngieHolden]

Wow, thank you!

[@DrgnflyDrmz]

Thanks for the explanation Angie. I saw this on HSN yesterday and purchased it. I have to tell you the host asked Anna Griffin if she could make 4 different cards at the same time using the mat. Anna answered, “no, you would have to make four of the same exact card.” Well you showed you can make different cards. Thanks!

[@AngieHolden]

HA! She probably meant that you had to make the same size. Which is true. But you can make 4 different ones as long as they are the same size!

[@yolandasmith6781]

I also watched HSN yesterday and heard Anna Griffin say you could only make one card at a time. After watching Angie demonstrate the opposite, I feel my purchase is really worth the investment.

[@AngieHolden]

Happy to help!

[@SlowPCGaming1]

Brother Scan N Cut machines don't have these restrictions. Our machines have built-in 600 DPI color scanners. We can scan our mats to know exactly where to place our designs. This lets us use up all the material we have. Full creation and editing tools right on the cutter itself! We can use any size material to fill the whole mat if we desire. Even with stuff we print ourselves.

[@chris_drgnflydrmz3650]

@@SlowPCGaming1 I have a Scan N Cut as well as 3 Cricut machines. I haven't quite mastered the SNC and have had more practice on the Cricut. You can also place your materials on the Cricut where you want, you just have to remember to also move it on the virtual mat before hitting the cut button. The reason this mat is essential for the card making is because the cards are actually folded in half. If you cut the card folded the design would cut completely through and not stop on just the top layer. Of course you could always cut a design on part of the paper and then fold afterwards.

[@ashlymatthews8819]

Thank you for going in such detail explaining what to do step by step

[@AngieHolden]

My pleasure 😊

[@jrhodes3216]

When these came out on Sunday the very first thing I did was look to see if you had a video on them! I knew that you would be the best person to explain it to me, Angie! ✨🌟✨

[@AngieHolden]

Hope you enjoy!

[@elizabethk8938]

I’ve made several cards since receiving the new mat. It works great on the Maker. I’m not a huge fan of all the paper packs since I think the color selection could be better. (my favorite is the cutaway). But this is no problem for me. I plan to experiment with cardstock and just cut my own inserts. It’s loads of fun to use. Thanks!

[@AngieHolden]

Thanks for sharing!

[@Reneesfun]

Yes! I’m looking to go in the same direction. If anyone figures out what they are going to use for the insert and please share! Angieis the best!

[@LetsTryThatDIY]

Thank you for this video. You do such a nice job of explaining and demonstrating!!!

[@AngieHolden]

You are so welcome!

[@jamiedones3266]

Yeah! What Stephanie said. Thank you!

[@1LineAtATime]

Yes, she explains so well 💝! Much love Creatives!

[@peanut0426]

There aren't that many color choices and I'm not overly excited of the choices they have. Great video!

[@AngieHolden]

I totally agree!

[@brendabreton2954]

I am so thankful you did this video. Thank you thank you thank you❤️🇨🇦😊

[@lindaknight]

Just a thought, I will often contour out the insert lines and just glue a background cardstock - glitter is a favorite - to the inside of my card... Cricut cards are too expensive for me - I am on a budget and make lots of cards... Angie, I always learn something from your tutorials - THANK YOU!

[@AngieHolden]

Great idea!

[@esthervonhoffmann3429]

You are such a great teacher!

[@AngieHolden]

Wow, thank you!

[@kellypagan744]

Thank you for a great tutorial. I appreciate your honesty an showing potential flaws. Cricut is famous for releasing things without working out the flaws first. Using us as testers and fixing problems after the fact. Gives them a bad rap in some circles, which is a shame since I truly believe it is the best cutter out there.

[@AngieHolden]

Glad it was helpful!

[@allieg.1656]

I just got mine today, I'm excited, I love my card mat for the joy was so excited when it came out for the maker too

[@pokeywatson1]

Where did you get your card mat from please. i cannot track them down.

[@michiganlighthouse]

Great detail. You covered so much I needed. I will refer to your video as I try out those newfound skills. I'm 73 and limited in how much I can accomplish and still contribute to my household (doggie & active hubby). As a creative type, I've made many saleable items over the years so I look for efficiency that also allows me to use my creative skills. I've spent a week trying to use this mat successfully and finally 'got it'. I found my little scraper worked well for removing the cards and is easier to keep clean vs the spatula. Great video.

[@AngieHolden]

Happy to help! Thanks for watching!

[@obobob1867]

I saw this item a long time ago from a person that bought it early, asking about it. FINALLY IT'S BEEN RELEASED. Hallelujah. If I ever buy myself a Cricut Maker, it is in the cart. :3

[@AngieHolden]

I found it at a store weeks ago and I have been patiently waiting. Okay not so patient! HA!

[@aloknight3656]

I thoguht I had to use a weeder and ended up scraping the card a little, then I watched your video and the rest of ot came out good. Thank you!

[@AngieHolden]

Glad I could help!

[@charlottec748]

I bought the 2 x 2 mat because I have to make 40 insert baby thank you cards for a friend. Now I'm holding my breath that the cuts don't go off the edge like yours did. Guess I'll have to wait and see. Thanks for the great video.

[@AngieHolden]

Good luck!!

[@nancyfitch4789]

Thank you! This video was very helpful!

[@AngieHolden]

Glad it was helpful!

[@JulieEbersole]

Thank you, Angie! I’m the type that would troubleshoot, as you did-I GREATLY appreciate the time and effort you put in to doing that up front for us. While I personally feel confident, with your shared knowledge, that I will purchase the 2x2 mat, it truly baffles me that the company doesn’t hire YOU, as a consultant, to test all of this AHEAD of production and release, to ensure ease of use by the average consumer, who really should not have to fuss. At any rate, standing O to you, from me, LOL! 👏🏼👏🏼👏🏼

[@AngieHolden]

Thank you so much!

[@barbaramazzatenta9228]

Thank you so much! Great tutorial! So informative! You are a great teacher, you tell us, you show us, and you explain everything clearly! Thank you!

[@AngieHolden]

Glad it was helpful!

[@barbaramazzatenta9228]

@@AngieHolden you are a great teacher

[@irishdawn8387]

I ust got m cricut can't wait to try this when the mat come in stocks soon

[@bonniepillarelli6483]

Thank you so much. I just received the mat and two boxes of cards, so this has been so helpful. You have given me much more confidence than I did have.

[@AngieHolden]

I'm so glad!

[@huginanenvelope]

Awesome real presentation, I love the good the bad and the hack.

[@AngieHolden]

Thanks!

[@bhebhe15]

Thank you for doing this video❤️👍🏻😊

[@jk_sewingjamila1001]

i love how you explain things thanks for this i got this mat and dont have to confidence to try it but i will after watching this xx

[@AngieHolden]

You got this!

[@jk_sewingjamila1001]

Thank you I have watch you for a long time and love your honesty and how you explain things for us brits I get your terminology stay safe keep crafting I watch the foil video and I feel for you I too have arthritis people just don’t understand that don’t have it how debilitating it can be stay safe Lyn xxx

[@leeannecarr8414]

The advice on design space vs card size answered a question I've been chasing forever! For ex, I design a R20 (w/the cricut card specifications) & the Cricut only wants to cut it as a R30. & if you "Make" when doing a R20 & it will only give you a R30 recommendation & if you go with it, then the corner cut outs are mucked up & won't fit the insert. I wish Cricut would adopt your chart & publish it! No where on their site do they mention this card sizing versus design space sizing issue! TY Angie!

[@AngieHolden]

I had to really dig for these card sizes and maybe they eventually changed them?

[@brendanbossard6928]

This is very helpful. We just got a card mat and this is just what we needed to help us get started!

[@47bettie]

Thank you Angie another great helpful video! Just Brough the 4 card mat two weeks ago, so this has been good very helpful thank you for teaching us, you always explain very well and so helpful!! Hugs Liz 😊

[@AngieHolden]

Glad it was helpful!

[@47bettie]

@@AngieHolden very helpful thank you!!☺

[@videokidz007]

Thank you for the very informative video that you explained very well!! The cutaway cards seem like such a convenient way of doing cards so I went & bought some before seeing your video. I own a cricut explore air 2. I would hate to have to invest in a new machine - DAMN!! I wish I would have seen this video before purchasing.

[@AngieHolden]

You can make cards with the Explore Air 2.

[@dorothygani5348]

Wonderful, informative video! I spent 2 hours watching a 'live video' which kept losing me because she kept answering questions and comments as she was working on the project. I was totally lost with her!!

[@AngieHolden]

Glad you enjoyed it!

[@judyanthony8088]

Excellent video.

[@stephanietm9960]

Fantastic video! I learned so many details that will help me immensely. Thank you SO much for showing ALL of your processes and not just the "perfect" endings because that's exactly what I need to learn and fix my errors. It REALLY decreases frustration (and sometimes giving up) because you show that things happen and what to do to fix them. You always do such a nice job of teaching. Thank you!!!

[@AngieHolden]

Thanks for watching!

[@shandraparks7255]

This was an awesome video - learned alot! Love the details you always include in all your videos!!

[@dudleyshandmadeshop]

Thank you for sharing, The card mat was a good think I have got thank you

[@bridget3027]

Great job thank you for showing me how to do these cards. I love that the writing works so much easier with this tablet than with the older single one.

[@BeyondTshirts]

Perfect tutorial! Makes DIY cards so much faster! Using my card mat for the first time today to make Christmas cards!!!

[@AngieHolden]

Have fun!

[@edmelzark1069]

Great Information. Thank you, Ed

[@donnathomas2981]

Thank you for the information in this video. You showed me things that I would've never known, for instance, the film needing to be peeled off of the card mat and the moving of the star wheels. The mat doesn't come with instructions, and I don't understand that. Thank you again, Angie!

[@melissaholbrook9850]

I cant get my star eheels to move.

[@zoedoodle]

Thanks for taking so much time to show how this works. I love my Cricut but have not used it for writing and drawing. And from what you show here, I will not use this new tool. It is a good idea but clearly, Cricut folks have not perfected it yet. Cricut accessories are always quite spendy and since the result is not placed correctly and the cutaway product is time consuming to remove, I think I'll wait. It would surely be a blessing for batch card making once it works better.

[@SlowPCGaming1]

Brother Scan N Cut machines don't have these restrictions. Our machines have built-in 600 DPI color scanners. We can scan our mats to know exactly where to place our designs. This lets us use up all the material we have. Full creation and editing tools right on the cutter itself! We can use any size material to fill the whole mat if we desire. Even with stuff we print ourselves.

[@brendalawrence6732]

As always you hit on everything when something new comes out. I love that you tell the good, bad and ugly. I like the concept of this mat, but don't like the price of this mat and I don't like how the designs don't line up perfectly each and every time depending on your machine. This is why I'm not a huge fan of the insert cards too. I haven't tried the cutaway cards yet and I'm not to sure about those. lol But I can see this mat coming in handy if you have to mass produce invitations, etc...Still needs some tweaking to me though. Thanks so much for showing how everything works with this mat, you always do an amazing job. Hugs, Brenda

[@AngieHolden]

Thanks for watching! Definitely not a product for everyone!

[@kristieroy1024]

Try to use the mat upside down. The slot is longer and allows you to adjust placement of card since you can’t adjust design. I have maker 3 and explore 2 and both gave unbalanced designs . But using with mat reversed I’m getting perfect results.

[@SlowPCGaming1]

Brother Scan N Cut machines don't have these restrictions. Our machines have built-in 600 DPI color scanners. We can scan our mats to know exactly where to place our designs. This lets us use up all the material we have. Full creation and editing tools right on the cutter itself!

[@SharoninKentucky]

@@kristieroy1024 I need a video! I haven’t got my mat yet so not sure what to do. I’m sure I’ll have some questions when I do. I have to cut my card stock from what I have. What is the most popular size? Thanks

[@kristieroy1024]

@@SharoninKentucky I’m not a KZbin content maker. But I could this weekend (when I have time to craft) make a video and upload to my page so you can see what I mean by using mat reversed. As far as popular card sizes, all the card sizes that can be used with the mat are great choices as they can all be sent through U.S.P.S with a single stamp. So it’s more your preference. But many crafters go with A2 card size because you can make 2 cards with each sheet of card stock so it cuts waste and cost.

[@MariaNyceDesigns]

Angie, you’re amazing in my book!!! I appreciate you sharing your finding, tips, & hacks!!! Sending gratitude & blessings!!!

[@AngieHolden]

You're the best!

[@kathleenhodges5184]

You are a very good and thorough teacher. Thank you for your very valuable information. Very nice presentation!!

[@AngieHolden]

Thank you kindly!

[@Rachy71]

Thank you for another great video for Cricut. I'm going to try and make some cards today. What I'm doing with the card I bought that don't have the letters and numbers on then is opening the box pulling it out a small amount and writing what the letter number combination would be. I have the Cricut Joy card boxes and looked at the measurements matched to the letter system and added. I would most likely forget to look at a cheat sheet with the info so for me this is simpler. Just waned to share with you. Thanks again Angie for all the amazing tips.

[@AngieHolden]

You can DEFINITELY do that! I was just getting confused myself on the video filming so I made a chart!

[@SlowPCGaming1]

Brother Scan N Cut machines don't have these restrictions. Our machines have built-in 600 DPI color scanners. We can scan our mats to know exactly where to place our designs. This lets us use up all the material we have. Full creation and editing tools right on the cutter itself! We can use any size material to fill the whole mat if we desire. Even with stuff we print ourselves.

[@gailrhodes7771]

You are great at explaining everything!!! Thank you so so much!!!

[@AngieHolden]

Thanks for watching!

[@sweetpeahunnybee]

I figured out a way to fix the off center cut for insert cards! At first my machine was cutting them off center so that the slits cut through the side of the card but I did a print than cut calibration and now its cutting the cards perfectly centered :)

[@AngieHolden]

Great tip!

[@Dee-nl2jk]

Hi Angie, thanks for the great video. Can you explain more in detail how to put the slightly smaller design evenly on the cutaway card in design space without ruining one card first.I have an explore 2 also. thanks!

[@AngieHolden]

You should be able to center it after you click make it and say you are using the card mat.

[@virginiaarsenault2575]

Ingenious. I love it

[@Babz67SS]

Nice demo. Cut away ares are definitely going to be my fav !

[@AngieHolden]

Mine too!

[@lindakempke8094]

Very well done and clearly presented. Thank you.

[@AngieHolden]

Glad you enjoyed it!

[@heathermolsbee5751]

Excellent video! Thank you for all the great info!

[@AngieHolden]

Glad you enjoyed it!

[@Poohtle]

Thank you. Such a great tutorial. I was pausing to make along with you and you make it very easy to do.

[@AngieHolden]

Glad it was helpful!

[@sandrahendon9952]

This video was awesome I was considering buying a Joy just for cards and now I am so excited to purchase the new mat for my explore air 2

[@AngieHolden]

Yay!

[@craftingwithjean5599]

Your video is very informative, good explanations

[@AngieHolden]

Glad you think so!

[@dawnscott5529]

Thank you for this video! And thank you for the card size chart. I love how you explain things. :)

[@AngieHolden]

I was getting so confused so I made a chart!

[@Justin_W]

Thanks for producing a great video! This new mat looks amazing! Thanks for the in-depth walk-through! It's a HUGE help!

[@AngieHolden]

Glad it was helpful!

[@amywalker4359]

I sure like that they made the protective cover a frosted look. I can't tell you how many times I've left the clear cover on my Joy card mat, 🤣🤣🤣. It's invisible!!

[@AngieHolden]

I actually LOVE that part!

[@wadecrabtree8663]

What a GREAT demonstration! Thank you so very much. I’ve already ordered the card mat!

[@AngieHolden]

Have fun!

[@shuggaraecreation2009]

Thank you so much for the tutorial very thorough and transparent. I have a brand new air explore2 and you save me 20.00 the cost of the mat and frustration that will come creating cards. Shame on Cricut not working out the kinks before releasing the mat they know most creators thrive on perfection.😊

[@SlowPCGaming1]

Brother Scan N Cut machines don't have these restrictions. Our machines have built-in 600 DPI color scanners. We can scan our mats to know exactly where to place our designs. This lets us use up all the material we have. Full creation and editing tools right on the cutter itself!

[@debbier1645]

What kinks? Within 20 minutes of receiving my mats I had 4 different cards made - all cut out at the same time.

[@cp21mimi]

what a GREAT explanation!!!! I feel like I know how to use the mat!!!!!

[@AngieHolden]

Yay! I worked hard on this one!

[@gerilynne1955]

Brilliant! Big time saver. Thank you for showing us this.

[@AngieHolden]

Yep! Anytime!

[@thejoyfullilyandco9537]

As always, you do a fantastic job walking us all though the process! After watching, I'm fairly convinced it's easier (and cheaper) for me to keep designing and cutting from scratch in Design Space. Especially since I don't have a Cricut Access subscription. This seems like a lot of steps to me. But again, amazing explanation! Thank you!

[@AngieHolden]

I do think it is just as easy to do that. This is for quicker cards to me if you have Access.

[@thejoyfullilyandco9537]

@@AngieHolden makes sense!

[@SlowPCGaming1]

Brother Scan N Cut machines don't have these restrictions. Our machines have built-in 600 DPI color scanners. We can scan our mats to know exactly where to place our designs. This lets us use up all the material we have. Full creation and editing tools right on the cutter itself!

[@tammywhite2119]

Great video. As seasoned card maker, it seems like too likely that I would be frustrated easily when something didn't work.

[@Sharie609]

Very helpful and informative video! I just ordered the card mat so I appreciate your tips. Looking forward to seeing more. Thanks!

[@AngieHolden]

Awesome! Thank you!

[@pattishelton3169]

Thank you, great video! I just had total shoulder surgery a week ago and can’t do much of anything but, this video made me think I can get out my Joy and make some cards I think! So inspired!

[@AngieHolden]

You totally can! These cards are so much fun to make!

[@mardellgrayhek9958]

Great video! I just received my mats today and didn't remember to buy the cards. It would be great to discover a way to use cardstock cut to size and scored...with a little ingenuity on what to put inside. I'm excited to get some of the cards next.

[@AngieHolden]

You can cut and score the cards just make sure they are the same size as the Cricut ones if you are using their designs.

[@yalonndag.7041]

Thank you for this! So much information. This is helpful!😁👍🏾

[@AngieHolden]

So glad!

[@leoniepreece1784]

Thank you, so very much ❤😊

[@AngieHolden]

You are so welcome

[@Jennifer85987]

such a helpful video, thanks so much, just love your channel, been a subscriber for a while now because your help is worth a million when it comes to Cricut making ... I just ordered that card mat and I'm sooooo happy you already made a video ❤

[@AngieHolden]

YAY! So happy to hear that!

[@elizabethvallely4044]

Hi Angie, thank you for this video it was great and very helpful as always!!! You explain everything so well and give great info and tips!!! Thank you for sharing hugs Liz.

[@AngieHolden]

Thanks for watching!

[@emilygraham9008]

I had already bought this mat before I saw your video. I will still give it a try of course before getting rid of my Joy. I have a practically brand new Maker 3 so maybe I won’t have that problem. We’ll see. Thank you for making this video!

[@AngieHolden]

Hope you enjoy it!

[@makeitwork8367]

Very thorough, Thank you!

[@creativecoutureone]

What blade do you use with the cards? I used the regular one and it cut all the way through to the back of the card! Help!

[@AngieHolden]

Just the regular blade. If you use this card mat, you should put the back of your card inside so it doesn't cut it.

[@rookdebpoye6166]

Thank you Angie!! ❤️

[@debramirich4480]

Thank you for sharing!😊. Love this!

[@AngieHolden]

Thanks for watching!

[@jenniferwirth1987]

Great video explaining this. Thank you so much!

[@AngieHolden]

Glad you enjoyed it!

[@kathleenhodges5184]

Thank you for this excellent tutorial. You do a great job providing the most important material.

[@AngieHolden]

Glad you liked it!

[@luciam.9094]

Thank you so much! I learned more watching two of your videos than a bunch of Cricut tutorials. You gave me all the answers I was hoping to get. Do you have a tutorial on the tools needed to cut cards and what they do?I keep seeing different tools mentioned and I already want all of them. Also, is there a wholesale site where we can buy Cricut precut cards, mats etc? I can already see how this will turn into a very expensive hobby! 😅

[@AngieHolden]

Try this for blade options: kzbin.info/www/bejne/r4Oppn2AqMp3iLs and I don't know of a good wholesale site!

[@maaike-4676]

If you choose the option ‘medium cardstock’ instead of the ‘insert cardstock’ than the explore air 2 cut it perfect!

[@AngieHolden]

WEll that is interesting!

[@maaike-4676]

@@AngieHolden I send you a message on instagram. With an example 🙃

[@Pbjthings]

Good video thank you! Why not cut the cutaway and then stick the background on after?

[@AngieHolden]

Then you would have to pick up all of the small pieces and place them individually.

[@1CraftyBunnie]

Love the info. Got the card mat and a bunch of Cricut Card packs for Mother's day. Looking forward to the videos on how to use them!

[@AngieHolden]

Have fun!

[@nikkm6480]

Thanks so much Angie another present to my list. Thank you for always making things look so easy and if difficult I enjoy returning to watch again.

[@AngieHolden]

Happy to help!

[@kathg9415]

Great instructional video. I really enjoy all of your tutorials!

[@AngieHolden]

Happy to help!

[@dipaolav]

Honestly, this is a lot more effort than then result is worth…if you’re a frequent card maker it make be worth taking the time. I’m going to do a test run on my Maker and see what happens!

[@nikkihoffman2891]

Such a complete and detailed description. Great job and you answered all my questions!!

[@donnat4895]

So excited that this is out. Thank you for such a great video!!!! You’re so helpful and inspirational 👏👏

[@AngieHolden]

Thanks for watching!

[@jilly235]

Thank you for going over this. Now that I have watched this, I’m not so sure that I’m going to buy the mat. I have the cricut maker, so since you used the Cricut explore 3, maybe I won’t have that luck.

[@AngieHolden]

You are so welcome!

[@ruthhyster5807]

Thank you for another excellent video. I understand the new mats much better than I did before. The only thing I missed is how you made the changes for 4 different cards on the 2x2 mat at the same time. Thank you again .

[@AngieHolden]

I am confused by the question? You can make 4 different cards on the same mat as long as they are the same size. Change all of the cut lines to the same color. Pen colors can be whatever you want.

[@ruthhyster5807]

@@AngieHolden I apologize for any confusion. I guess I just don’t understand 4 different cards with 4 different messages and designs on the same mat. I’m sure I’ll understand with I receive my new mats and start making cards on it. Again I apologize and thank you for your help.

[@AngieHolden]

Yep. I did a demo with two cards and making the cut portion the same color. You would just do that with 4 cards.

[@ericasherlock7597]

Wow! I just don't understand why Cricut didn't leave the cards alone. This seems like A LOT more work than the simple way with regular cardstock they had before!

[@AngieHolden]

You can still make cards with regular cardstock. This is just for quicker cards.

[@debbieburton9212]

Another great explanation video by Angie! I stopped making cards with my joy because the mats didn’t stick anymore and the location off with so many…maybe I will try again with my maker 3?

[@AngieHolden]

Definitely worth a try I think!

[@starbrown1219]

Great video. You certainly covered everything. I definitely would like to make the cutaway cards. I have the insert cards and had found in the past they did not always cut well, as you have shown in your video. Thank you.

[@AngieHolden]

I have ALWAYS had periodic trouble with the insert cards. I like the cutaway so much better!

[@KiddiECuLDeSaC]

will definitely look into one of these

[@star1d]

Now I am sorry I ordered the new mat and the cards before I watched your video, but I got too exited. It seems the design of the new mat was a bit ambitious. I would rather make 2 cards at the time instead of 4. A bit of a bummer I can't do my favorite size of cards (5x7) and already have to think about a work around of the errors I might make with the new mat. 🤷 However, thank you for your honest opinion. Always greatly appreciated. 😊

[@AngieHolden]

Your machine may do perfect cards every single time but I didn't want to cut out all of the errors that I experienced.

[@jeanharmon9561]

Thanks so much for this tutorial.. I make tons of cards on my Joy and Maker, didn’t know this mat was available until I viewed this! I design most of my cards but haven’t tried cutaway cards yet..this mat would be a time saver for me, and, now I need to try cutaways ! Cricut has specific packaging for cutaways I assuming? I’ll need to acquire some, thanks again…by the way I went to a 4.75 by 4.75 card standard for most cards, soooo much easier to manage…

[@AngieHolden]

Yes there is packaging that says "cutaway" on it!

[@wandagassaway5054]

Angie can you use regular card stock on this mat to make a card ? Thank you in advance

[@AngieHolden]

You would have to cut and fold your own cards.

[@JoeGosling1964]

Help!! I have a Cricut Maker and saw your great videos for cutaway cards so today I had delivered the Card Mat 2 x 2 and a couple of packs of Cricutjoy Cutaway Cards. I followed your instructions to the letter but each time my machine cut not only the card but the backer as well. What am I doing wrong?

[@AngieHolden]

Hmmmm. I haven't had this issue with the cutaway cards. Do you have the fine point blade in your housing and not the deep point blade?

[@zaidagonzalez466]

Thanks, I was wondering what that was and when it ask you what Mat to use.

[@AngieHolden]

Well, here you go!

[@MyNailsandMorebyJohna]

great teaching video I love the new mats for cards

[@maryannmahshie6143]

Your presentation was very good and easy to understand. Thank you

[@MerylRice26]

I have tried making cards using the card mat. I put the cards in as instructed all the way up to the top and against the fold. However the patterns consistently cut out too far to the top so that the slits that the inserts are supposed to go in are at the edge of the card and can't be used. What am I doing wrong?

[@AngieHolden]

It is probably your machine unfortunately.