👨🏻‍🔧Another Day at the Junkyard: 4L60E 4x4 REMOVAL UNDER A DE☠️TH TRAP!

WANT TO SUPPORT JUNKMAN A?👨🏻‍🔧
👇🏽👇🏽👇🏽
💥🥩 www.A1JERKY.COM 🥩💥
GOURMET BEEF JERKY!
📬📬📬 📬📬📬📬📬
📬P.O. BOX 9249
📬FRESNO, CA. 93791
📬📬📬📬📬📬📬📬
••
Music By:Energetic Rock | Hiking Free Music by Alex-Productions & Efficsounds
🤩Thanks for stopping by and watching!🤩
👨🏻‍🔧🧰🔧
For professional inquiries:
⬇️
Email:
[e-mail]
🎥Filmed by: JunkManA
All Rights Reserved
and Protected Against Unauthorized Use.
🔧TOOLS USED 4 MOST 4L60E REMOVALS🔧
Always bring:
A good hammer, short and long flat head screw driver, rags, gloves, a good pry bar, good pliers and don’t forget your water!
Drive Shafts Removal: (Front & Rear)
11mm Wrench
3/8” to 1/4” adapter
1/4” 3inch extension
3/8” impact
12inch prybar
Crossbars/Subframes
18MM 1/2” shallow socket
18MM Wrench
21MM 1/2” long socket
21MM Wrench
(If 4x4 for transfer case)
15MM Ratcheting Wrench
15MM 1/2” Shallow Socket
1/2” ratchet
1/2” swivel joint socket
(Recommended using a electric ratchet to cut removal time by up to 90%)
Actual transmission:
13MM 1/2” Deep Socket
14MM 1/2” Deep Socket
15MM 1/2” Deep Socket
1/2” 12inch Extension
1/2” swivel joint socket
Wire cutters (the longer the better)
90° mechanic pick to loosen oil line E-clips
Torque converter:
1/2” 12inch extension
15MM Shallow Socket
15MM Ratcheting Wrench
3/8” Ratchet
3/8” 15MM shallow socket
3/8” 3inch extension
(Recommended using a electric ratchet to cut removal time by up to 90%)
**KEEP IN MIND THESE ARE THE BASIC TOOLS TO HAVE IN YOUR BAG FOR THE “PERFECT SCENARIO”**
I WOULD TAKE EXTRA TOOLS LIKE 12MM, 16MM, 17MM SHORT AND SHALLOW 1/2” & 3/8” SOCKETS and an adjustable wrench just in case!!
Hope this helps!
Junkyards are fun but can be very dangerous, STAY ALERT AT ALL TIMES!!
Thanks for watching!
COMMENT, LIKE & SUBSCRIBE FOR MORE JUNKY VIDEOS!
Thanks!
-JunkManA👨🏻‍🔧

[@gdmusic7990]

I never pull a transmission but you got me ready 2 hit the junk yard

[@Ajunkman]

Let’s goooo bro go out there and yank one off hahaha thanks for stopping by 🦾👨🏻‍🔧🔩

[@elicopeland3014]

Real question no hate.. can you mess up the output shaft shaking it like that ?

[@Ajunkman]

It’s all good bro. Not 1 bad shaft in the last 500 transmissions pulled lol

[@gbabyback]

How you kno u have a good one

[@Ajunkman]

First smell the oil, then taste it…. Should taste like a cherry pie Lmaoaoaoaoa jk No chunks of metal or clutch debris in the oil pan bro! And make sure the oil doesn’t have that common burnt smell!

[@ibeatoffroad]

You rebuild all these or just sell them as is?

[@Ajunkman]

Rebuild

[@ibeatoffroad]

@@Ajunkman sweet gig man. Keep up the work you’re crushing it.

[@garycallahan7867]

That one put up quite a struggle!

[@Ajunkman]

Yes sir every bolt was a tough one!

[@ramontavarez5859]

Good job 👍

[@Ajunkman]

Thank you very much 👨🏻‍🔧🙏🏽👨🏻‍🔧

[@daviddzedzy9194]

THUMBS UP👍👍👍👍👍👍👍👍👍👍👍👍👍💪💪💪💪💪💪💪PRO AT WORK

[@Ajunkman]

Thank you brotha I appreciate it VERY MUCH 🙏🏽🙏🏽👨🏻‍🔧👨🏻‍🔧

[@cheyennemaccord4690]

Interested in seeing a removal from 05-2012 Colorado 4wd Rebuild would be interesting too

[@Ajunkman]

I’ve actually been on the hunt for a 4x4 Colorado 2009 Hopefully I find it soon and I’ll record it 👨🏻‍🔧👨🏻‍🔧🙏🏽🙏🏽🦾🦾

[@kq2799]

22:37 Glad this isn't in 3D; I flinched thinking it was going to land in my lap!

[@Ajunkman]

Hahahaha nice time stamp!! Thanks for watching!🙏🏽🙏🏽

[@grifonks]

Wow, I checked you for new videos and one minute later there you are with a fresh one and an address! I thought about mailing to the jerky address but decided not to.... amazon package sent- ETA Thursday the 6th

[@Ajunkman]

What’s up bro!!! Been recording a lot just haven’t had time to sit down and edit I appreciate you man thanks for keeping in touch 🦾 Haha good thing you didn’t send it to that address!!

[@Ajunkman]

Wow!! 🎉 thank you very much man you made my week 🥲🥹 Lil crazy how July 6 is my bday!! Haha Thank you very much words can’t explain 🙏🏽🙏🏽🙏🏽🦾🦾🦾🦾🦾

[@grifonks]

@@Ajunkman I hope you are going to like this little b-day present JMA. thx for the vids, Rock on and I do enjoy your music!

[@mikeferland9185]

Our theese a pain to do I got to do my son's 1500 this weekend I'm a chevy guy but more 2nd gen shit and prior

[@Ajunkman]

Yeah they’re a pain at first bro hopefully you gotter done!!! 🦾👨🏻‍🔧

[@danielsarpong8108]

Hey bro, what exact tool do you use to cut the transmission cooler lines, wires etc?

[@Ajunkman]

Believe it or not they’re regular long wire cutters lol

[@danielsarpong8108]

@@Ajunkman thanks man