👨🏻‍🔧 Another Day at the Junkard: 1994 SILVERADO TRANSMISSION REMOVAL

💥🥩 www.A1JERKY.COM 🥩💥
💎GOURMET BEEF JERKY!💎
••
Music By:Energetic Rock | Hiking Free Music by Alex-Productions & Efficsounds
🤩Thanks for stopping by and watching!🤩
👨🏻‍🔧🧰🔧
For professional inquiries:
⬇️
Email:
[e-mail]
🎥Filmed by: JunkManA
All Rights Reserved
and Protected Against Unauthorized Use.
🔧TOOLS USED 4 MOST 4L60E REMOVALS🔧
Always bring:
A good hammer, short and long flat head screw driver, rags, gloves, a good pry bar, good pliers and don’t forget your water!
Drive Shafts Removal: (Front & Rear)
11mm Wrench
3/8” to 1/4” adapter
1/4” 3inch extension
3/8” impact
12inch prybar
Crossbars/Subframes
18MM 1/2” shallow socket
18MM Wrench
21MM 1/2” long socket
21MM Wrench
(If 4x4 for transfer case)
15MM Ratcheting Wrench
15MM 1/2” Shallow Socket
1/2” ratchet
1/2” swivel joint socket
(Recommended using a electric ratchet to cut removal time by up to 90%)
Actual transmission:
13MM 1/2” Deep Socket
14MM 1/2” Deep Socket
15MM 1/2” Deep Socket
1/2” 12inch Extension
1/2” swivel joint socket
Wire cutters (the longer the better)
90° mechanic pick to loosen oil line E-clips
Torque converter:
1/2” 12inch extension
15MM Shallow Socket
15MM Ratcheting Wrench
3/8” Ratchet
3/8” 15MM shallow socket
3/8” 3inch extension
(Recommended using a electric ratchet to cut removal time by up to 90%)
**KEEP IN MIND THESE ARE THE BASIC TOOLS TO HAVE IN YOUR BAG FOR THE “PERFECT SCENARIO”**
I WOULD TAKE EXTRA TOOLS LIKE 12MM, 16MM, 17MM SHORT AND SHALLOW 1/2” & 3/8” SOCKETS and an adjustable wrench just in case!!
Hope this helps!
Junkyards are fun but can be very dangerous, STAY ALERT AT ALL TIMES!!
Thanks for watching!
COMMENT, LIKE & SUBSCRIBE FOR MORE JUNKY VIDEOS!
Thanks!
-JunkManA👨🏻‍🔧

[@nickh3343]

Wanted to let you know I've been watching for a long time and you're my favorite channel to watch

[@Ajunkman]

Wow thanks man I appreciate it 🙏🏽🙏🏽😅🥲🥹😩 sorry it took so long to reply I’ve been moving this past month and just barely had time today I have about 120 comments I haven’t replied to lol Thank you very much though you made my year with your comment 🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽👨🏻‍🔧👨🏻‍🔧👨🏻‍🔧👨🏻‍🔧👨🏻‍🔧👨🏻‍🔧❤️❤️❤️❤️❤️❤️

[@johnweemes770]

Great work

[@Ajunkman]

Thank you very much 🙏🏽👨🏻‍🔧🍻

[@poppagrouch4781]

Dudes a beast....

[@Ajunkman]

Thank you I appreciate that 🙏🏽👨🏻‍🔧

[@daviddzedzy9194]

THUMBS👍👍👍👍👍👍👍👍👍👍👍👍👍UP JUNK MAN A REAL PRO👍👍👍👍👍👍👍

[@Ajunkman]

Thank you bro 🙏🏽🙏🏽👨🏻‍🔧👨🏻‍🔧🥲🥲😅

[@davidtrisha1469]

Im going to order some jerky👍

[@Ajunkman]

🙏🏽🙏🏽🙏🏽🙏🏽🥩🥩💯💯🥩🔥🔥🔥🔥🔥🔥

[@munirladha6787]

use ratcheting straps to lower the transmissions down. unbolt the converter first so the trans pump does not get damaged.

[@Ajunkman]

Never had a messed up pump in my life by how I pull them. This isn’t a how to video. This is a video of me working.

[@garycallahan7867]

That thing was clean for a truck that old. Do you have an oil absorption pad in the back of your vehicle?

[@Ajunkman]

Yeah some are pretty nice I just use mats lol may need to invest in a actual pad

[@grifonks]

I like the jerky JMA!

[@Ajunkman]

🙏🏽🙏🏽🙏🏽🔥🔥🔥🥩🥩🥩 thanks bro I’m finally replying to everything right now sorry it took so long

[@grifonks]

@@Ajunkman You owe me nada, I appreciate the junkyard videos. I bought a set of Matco West Coast Chopper sockets from a Denver pawn shop in 3/8" and 1/2 dr, long and short in both metric and sae. The 3/8's are 6 pt and the 1/2's are 12pt

[@dgc940]

Curious what does the wrecking yards normaly charge for a trans if you pull it?

[@Ajunkman]

$350-$400 no warranty sold as is Approx