4L60E REMOVAL 2WD 99-06 SILVERADO TAHOE YUKON SUBURBAN

WANT TO SUPPORT JUNKMAN A?
👇🏽👇🏽👇🏽
💥🥩 www.A1JERKY.COM 🥩💥
GOURMET BEEF JERKY!
📬📬📬 📬📬📬📬📬
📬P.O. BOX 9249
📬FRESNO, CA. 93791
📬📬📬📬📬📬📬📬
••
Music By:Energetic Rock | Hiking Free Music by Alex-Productions & Efficsounds
🤩Thanks for stopping by and watching!🤩
👨🏻‍🔧🧰🔧
For professional inquiries:
⬇️
Email:
[e-mail]
🎥Filmed by: JunkManA
All Rights Reserved
and Protected Against Unauthorized Use.
🔧TOOLS USED 4 MOST 4L60E REMOVALS🔧
Always bring:
A good hammer, short and long flat head screw driver, rags, gloves, a good pry bar, good pliers and don’t forget your water!
Drive Shafts Removal: (Front & Rear)
11mm Wrench
3/8” to 1/4” adapter
1/4” 3inch extension
3/8” impact
12inch prybar
Crossbars/Subframes
18MM 1/2” shallow socket
18MM Wrench
21MM 1/2” long socket
21MM Wrench
(If 4x4 for transfer case)
15MM Ratcheting Wrench
15MM 1/2” Shallow Socket
1/2” ratchet
1/2” swivel joint socket
(Recommended using a electric ratchet to cut removal time by up to 90%)
Actual transmission:
13MM 1/2” Deep Socket
14MM 1/2” Deep Socket
15MM 1/2” Deep Socket
1/2” 12inch Extension
1/2” swivel joint socket
Wire cutters (the longer the better)
90° mechanic pick to loosen oil line E-clips
Torque converter:
1/2” 12inch extension
15MM Shallow Socket
15MM Ratcheting Wrench
3/8” Ratchet
3/8” 15MM shallow socket
3/8” 3inch extension
(Recommended using a electric ratchet to cut removal time by up to 90%)
**KEEP IN MIND THESE ARE THE BASIC TOOLS TO HAVE IN YOUR BAG FOR THE “PERFECT SCENARIO”**
I WOULD TAKE EXTRA TOOLS LIKE 12MM, 16MM, 17MM SHORT AND SHALLOW 1/2” & 3/8” SOCKETS and an adjustable wrench just in case!!
Hope this helps!
Junkyards are fun but can be very dangerous, STAY ALERT AT ALL TIMES!!
Thanks for watching!
COMMENT, LIKE & SUBSCRIBE FOR MORE JUNKY VIDEOS!
Thanks!
-JunkManA👨🏻‍🔧

[@edwardfrausto]

Absolutely killing it with tha junk yard transmission Vlogs! 🔥 You should do a toolbox tour and show tha best tools for overhauling transmission! Keep tha Vlogs coming!🔥💯

[@BSP77]

Second that man would be helpful.

[@Ajunkman]

I appreciate it bro 🙏🏽 thanks for stopping by!! I will definitely make a toolbox tour and Overhauling tips!! Thanks for the input 💯🦾

[@carlospazos9715]

you should do some transmission rebuild videos and some tear down videos bro. keep up the good work bro love the videos.

[@Ajunkman]

Thank you very much bro I appreciate you stopping by I’ll keep the videos coming 🙏🏽🙏🏽🙏🏽🙏🏽💯💯💯🦾🦾🦾🦾

[@KeepitReal-wn4zj]

Great video! If you could let us know what size of wrench, socket you use for Bell-housing 13:28 bolts , how many there is? Also, let us know the size for the crossmembers? And how you are removing the harness?

[@phillybred8580]

Great videos 💪

[@Ajunkman]

Thank you 🙏🏽

[@garycallahan7867]

Great job in the heat. Time to go back to the mountain.

[@Ajunkman]

Yes sirr!!! I’ll be going to Mt. Shasta later this month I’ll make a lil video 🦾💯

[@davidtrisha1469]

👍

[@Ajunkman]

🙏🏽👨🏻‍🔧🦾💯

[@grifonks]

I thought you could use a BIG tool bag Bro. If you prefer the Bauer it's cool JMA. But I decided to buy you that one way back when your previous bag crapped out. I just finished soldering in a new natural gas tanked water heater- I got it but I'm a chitty plumber... Get it? LOl! Took a cold water shower this morning.

[@Ajunkman]

Hell yesss bro the bag is amazing thank you very much I feel bad using it for the junkyard (it’s way too nice haha) but I’ll put it to use next video 🤙🏽🤙🏽💯👨🏻‍🔧 Hahaha hopefully that was you last cold shower in a while!! Colorado is going to get cold soon!

[@grifonks]

It was gasping cold dog@@Ajunkman

[@jrchavez9890]

Do you know if a square body 99 4l60e will fit in a 2005 Silverado?

[@Ajunkman]

I won’t