Vega Pro 50 Table Saw Fence System

Vega Pro 50 Table Saw fence install, check it out here! 50 inches to the right of the saw blade. Enjoy!
***Here’s the link for the system-
amzn.to/3rxnjm6

[@MatthewKrieger]

Good vid. I think there's another good reason to replace the stock fence with one like this aside from wider rip capacity - and that is to get beefier, more adjustable fence. The stock fences on many job site saws don't offer much in the way of tweaking the fence alignment to the blade/miter slots or adjusting the face of the fence to be perpendicular to the table surface. Additionally the stock fences are harder to mount jigs on since they are typically much smaller.

[@romanjohnston]

Awesome. Just bought the shorter fence. I have a setup to breakdown sheets that works up to 1/32nd of an inch. So only need it for shorter work. Just that the Rigid fence is not very confidence inspiring. The rest of the saw is great. Just needed to see the instructions in action. You have truly helped out quite a bit.

[@SF-rl7hl]

Great job Anthony! I have the same table saw and have ordered my Vega Pro 50 , can't wait to install after watching your video.

[@ShaneShepherd]

Thanks for this video! I have the same table saw and ordered the Vega 50. This video made the instructions much easier to follow.

[@patricklynch9601]

Very good video. As we all know nothing is quite plug and play and we need to adapt. You demonstrated calm responses to the issues you encountered which translates to confidence that most of us look for when we consider tackling similar tasks. Thanks for taking the time t post this.

[@AnthonyScolaro1]

Patrick Lynch thank you and thanks for taking the time to watch.

[@johnlowell2171]

Interesting upgrade. I did not know the saw could accommodate a large fence. Tks for the upload.

[@AnthonyScolaro1]

It is a great upgrade and there are many different manufacturers and models of these fences out there. It has improved the accuracy of my cuts as well as the capacity. I have another video where I install the extension table on this system. Thanks for watching!

[@thegoodfight365]

That's an awesome investment and upgrade for any saw, but to a jobsite saw, shows insane amount of ingenuity. Thanks for sharing your work 👍🏾God bless you.

[@coreelite]

I was thinking the same thing. That's a lot of fence and not enough saw!

[@tommykniest8231]

Great tips. Your garage situation is exactly like mine and its nice to know there's a way to increase my rip capacity without getting a cabinet saw.

[@klendatas1]

Why not just buy a track saw?

[@Confindencedrugee]

This seems like a good upgrade. I’m looking for a better working fence in general

[@TheOfermaimran]

Hey Anthony, happy new year...I have a rigid table saw like yours...my table is only 22 inches deep...is that how deep your table is? I noticed that the vega is 37inches...and it sticks out a bit off the table...thanks man, great video! should you answer me the way I need it, I'm going to use your video to help me install it..(after i buy if of course)...I've read that you shouldn't use this on 22 inch tables..unless I confused the delta...wanted to know either way. thanks broski.

[@AnthonyScolaro1]

Happy New year! Unfortunately I sold the saw about one year after this and that was 4 years ago and I had the saw 5 years ago so I don’t remember the dimensions of the table. The best thing for you to do is go online type in the model saw you have and search for the specs and that’s how you will find what you are looking for.

[@JoeLazzara]

Great video Anthony. Thanks for taking the time to do it. Very informative, clear and helpful!! I'll be looking into this now for my WEN table saw. Thanks again buddy.

[@marceaton3128]

First you do a great job explaining the process. I have been looking at that fence for my Craftsman saw because the rip fence is crap. Now, after seeing this install I am going to buy one. Thanks for doing this.

[@AnthonyScolaro1]

No problem, glad I was helpful

[@rickwinkelman9102]

Anthony, you did a great job on the video. Marc, I have a very old 12 craftsman table saw. still works great but the fence wont stay in alignment. how did this work on you table? what size was the saw?

[@5325jslenk]

Nice fence but when you build extension table fold up will be useless so why not just by a contractor saw at that point?

[@ThePapabear2012]

I got to do this to my rigid saw. Nice video!

[@Drake21673]

Very professionally done. Thanks for the tips, touches, and techniques.

[@gregoryayres1535]

Great vids bro.... i know its old but this is my saw and exactly what i was looking for....can you post update vid for 7 years later of use. Do you find that the U50 was too big making it HUGE so to speak for your space? like you im working in garage with limited space

[@AnthonyScolaro1]

Someone bought that saw from me a few months after I did that. I’m sure they are still happy with it.

[@thecaptain8773]

Nice job on the vid and thanks for taking the time to share it with the rest of us. Much appreciated.

[@TheComputerman2004]

Thanks for the video. I have the identical saw with the King Industrial brand on it. Both saws made at the same factory in China. I have been looking for a similar solution.

[@mtabernig]

be careful. it you build a n extension that far on a light table saw. it will tip over. Moreover, I observed on your video that the guide rails were dipping when you had just the fence all the way to the right. Perhaps you need dome type of support at the far right. At the end it will become more heavy and more difficult to move around and transport. However, if you decide to upgrade your table in the future you can re utilize that fence and rails. I just remember the body on the fence is plastic and may not support the stress for too long. Something to think about....Good luck!

[@AnthonyScolaro1]

I have upgraded the table on another video, I have also added a support leg. You can see it in action on my portable outfeed table video where I rip a full sheet of plywood. I will also add an updated video showing the stability of the table, it can support my body weight on the extension wing I built. Thanks for watching

[@valpro99]

I just purchased the smaller Vega for my 10" Grizzly contractors saw. Love it.

[@anonymousperson4363]

@ valpro99 Is that the saw with the rack and pinion fence?

[@valpro99]

@@anonymousperson4363 Sorry but I don't know.

[@anonymousperson4363]

@@valpro99 If you don't mind, look at this link to see if it's it. I have this saw and I don't like the fence. www.amazon.com/Grizzly-Industrial-G0869-Benchtop-Riving/dp/B08KVYPJLN/ref=sr_1_52_sspa?dchild=1&keywords=jet+table+saw&qid=1623870199&sr=8-52-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzVFBBUjNXUkpUSVRZJmVuY3J5cHRlZElkPUEwMDUzMzI3MklEN1dMVDJWUzZYQyZlbmNyeXB0ZWRBZElkPUEwMDAzNTM4MTdMRzQyUFIyUE9SQyZ3aWRnZXROYW1lPXNwX2J0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

[@GarageShopWoodworking]

Great upgrade and one I’m considering for my R4514. The install process doesn’t seem too bad. I am curious what the process was for storage. Like you, I have a minuscule shop and don’t have space to store a cabinet saw with a wide fence, where did this get stored and how? I realize this is a super old video so response isn’t likely but just a realistic question.

[@AnthonyScolaro1]

It still folded up, so I stored it folded up against the wall.

[@hectorrafaelguzman7265]

I love the video and want to modify my R4513 table saw too. Aligning the fence is the most frustrating part of cutting. I recently came into a used Vega Pro 40" Fence for almost free. I would like use it but noticed that the Vega fence is very heavy. Did you notice any flexing or other issues with the table saw post installation? This is my only concern. Thank you.

[@AnthonyScolaro1]

For the time that I had this saw, there was no flexing of any kind, especially since I installed a table between the rails and later added a support leg. I sold it to my friend and he still has it with no issues, even years later.

[@zbeshears6945]

Was your table saw still able to fold up and be portable after this upgrade? I have the same saw and the fence isn’t the greatest. But if it wouldn’t fold up still I wouldn’t want it .

[@AnthonyScolaro1]

z beshears yes it still folded, but it was much heavier to transport.

[@zbeshears6945]

Anthony Scolaro bro it’s so awesome that you still comment on a 4 year old video. Good to know thanks!

[@Mac-mu9cs]

Anthony , how did the fence hold up and how did the fence do on keeping square as extended? Did you replace the rigid with a better saw.

[@AnthonyScolaro1]

The guy I sold it to about 4 years ago still has it and still loves it.

[@darvaish4552]

ANYHONY........you are a STAR. Thanks for this video

[@cbuddie]

Great video. Thanks for posting. Might try this on my Craftsman.

[@AnthonyScolaro1]

Christian Buddie if I'm not mistaken, I was told these vega systems were made mostly for craftsman saws, so the install might be a little easier.

[@cbuddie]

Thank you Anthony. I'll give it a look before I buy the fence. Your install looked pretty smooth. Inspired me to finally quit complaining about my factory fence and take some action. Would you say the fence alignment you set in the beginning, still is in good shape, or do you periodically have to reset/tweak it a bit?

[@AnthonyScolaro1]

Christian Buddie I sold the saw 9 months ago and got a delta hybrid saw. The amount of work I've been doing requires more of a cabinet style saw

[@seajan808]

Is the bar where the fence sits able to slide to the left or right to make proper fit ? If so How many inches of play is there to move the bar from right to left ? Thanks for the video it's very helpful

[@AnthonyScolaro1]

SA I don't own this saw anymore so I can't give you an exact measurement of side to side allowances but it was roughly around 1/2 an inch.

[@raydivello5634]

Great set-up and video! Question... How stable does it feel being attached to a aluminum top? I have my DeWalt built into a workstation and was considering the upgrade but had some concerns about the stress on the table.

[@AnthonyScolaro1]

It's been absolutely fine, so glad I did this upgrade. I also added a support leg to the extension table that I made in another video. But I did that later on. I'm hoping to do a follow up to these videos since I'm getting a lot of questions, so look out for that video

[@JD_Fidler]

Great vid and a great upgrade, one that I'm considering for my Ridgid 4512. How often do you use that much rip capacity? Was the extra money worth going to the 50" over the 40" option?

[@AnthonyScolaro1]

It was nice to have but since I had an opportunity to get a delta hybrid saw and a dewalt track saw, I sold the Ridgid. Those tool review videos are coming soon. The vega fence is amazing but you could get the smaller rip capacity for cheaper and it will work just fine.

[@rickwinkelman9102]

Anthony great video. Question, i made a table insert that goes on the right of my table. i used 2x4 and glued them up like a kitchen cutting board. it worked great but years later the boards shrank and pulled in the fence rails. i had to keep adjusting the rails. did you have any issues like that with your table insert you made?

[@AnthonyScolaro1]

Rick Winkelman no I did not because I used plywood for the table surface and plywood doesn’t have any seasonal movement.

[@fabog6157]

do you find the table saw stand rocks and sways to much ?

[@AnthonyScolaro1]

It didn’t, I also installed a folding leg for more support.

[@ThePapabear2012]

Question, With the front only being a 1/16" down from the table doesn't it interfere with sleds using the miter slots? Or does the tube sit lower?

[@AnthonyScolaro1]

ThePapabear2012 I said 1 & 3/16” down. And if you look at the marks I made with the sharpie, you’ll see they sit we’ll below the miter slots. You should have no problem if you follow the instructions that come with the systems.

[@jasonb4350]

That's a great fence and the saw is is a good job site saw but they don't really mix you should just get the r4512 saw and put that fence system on it

[@andrewgonzales3715]

OK thanks Anthony !! gonna order this and try it out

[@usaf4dbt]

Its now Oct of 2019, how is your fence system holding up? Any problems with it?

[@AnotherMaker]

I've had that for years and love it.

[@rogerwhiting9310]

Vega makes a Utility 50 fence and a $100 more Pro 50. Anyone know what the big difference is?

[@mikemerc74]

What table saw is that one / model number

[@greatphoto1434]

Hello Anthony, I did notice you changed your table saw on another video and just read on the comment below that you sold this table saw 9 months ago, I have the same Ridgid contractor saw and was going to order the Vega pro 50 based on your video. Can you tell me how the vega fence performed on your Ridgid saw, and if you are able, tell me the reason why you upgraded your saw. I am also debating whether to upgrade the fence or use the money to upgrade the saw. Thank you kindly in advance.

[@AnthonyScolaro1]

Nathan Park the saw was very good and the system was great but I only bought this saw for the problem of having no space in my garage because it folded up. Once I built an extension and acquired more space, I decided to go with the saw I always wanted but didn't originally have room for. If you have the space, you should go straight to a hybrid or cabinet saw.

[@johnasaro4342]

They original fence is pretty good . Go by a cabinet saw instead

[@koryjames8361]

That's a great upgrade. Do you happen to know if they make it for a bosch 4100?

[@AnthonyScolaro1]

Kory James it should fit any saw but the saw might need modification like this one did

[@davidwillhoite4372]

Is it just me, or when u slid ur fence down to the end of the rail at 13:50...it's insanely wobbly?

[@AnthonyScolaro1]

David Willhoite that’s because you seeing it without the plywood table and supporting leg

[@darrellcarter1622]

Great video! I have the R4513 and want to change out the fence also. Did the added weight of the Vega have any affect on the cast aluminum table? Or did the extension legs compensate for the extra weight? I have a couple of fences in mind--Vega and the Biesemeyer--just have not made up my mind yet. Again, thanks for the informative videos.

[@AnthonyScolaro1]

Darrell Carter thank you, this fence system was great, I have sold the sold about 10 months ago to a much larger Delta hybrid but when I had this system on the ridged, I just added a leg for extra support on the table extension end and it was fine

[@darrellcarter1622]

Great! I will have to order one as soon as possible.

[@wjhuntr]

@@darrellcarter1622 DId you buy this fence system? I have this saw and would enjoy a fence that is dead accurate

[@darrellcarter1622]

@@wjhuntr

[@darrellcarter1622]

@@wjhuntr, No, I never did. I got side tracked with other projects. Just noticed your reply. I don't do FB, Twitter or any Social media. I am researching fences again, and hope to get one if I can find one for the right price.

[@Shawn-rq4py]

I have a dewalt table saw the size of yours. The top on mine is a rigid plastic. Will it be strong enough to hold this fence? Thanks

[@AnthonyScolaro1]

I'm going to say no because the hole rail system is very heavy and will probably just rip through and sag. It will never stay true to the table.

[@Shawn-rq4py]

+Anthony Scolaro well dang. Ive been looking for something and saw your video and was hoping, thanks for the reply!

[@AnthonyScolaro1]

+G23 no problem, sorry it was a let down but safety first.

[@themagnet61]

I am going to buy a DeWalt DWE7491RS, Will this fence work on that saw?? I am open for suggestions also. I need a new tablesaw

[@MatthewKrieger]

According to Vega the answer is yes but you'll need to drill a hole in the top.

[@robertwood8281]

Hey Anthony, appreciate the video. I have the ridgid R5412 and am looking for a fence upgrade and am looking at the vega pro 50. You seemed happy at the time of the video. do you still like the fence after using it for a while?

[@AnthonyScolaro1]

Robert Wood I don't own that saw anymore, I upgraded to a hybrid/cabinet saw 2 months after I made this video, but the guy I sold it to still loves it.

[@daviddavis5689]

That is a expensive upgrade for that level of table saw.

[@theruckers905]

Probably the best upgrade though?

[@Assimilator702]

David Davis Maybe but he can install the fence on any table saw he purchases in the future.

[@chrismoore9997]

How does the saw frame deal with the extra weight?

[@AnthonyScolaro1]

Chris Moore with the extension leg added, it held up fine. The guy I sold it to a few years ago still uses it

[@andrewgonzales3715]

how much was this pro50? and did you have any problems after installation of this?

[@AnthonyScolaro1]

Andrew Gonzales I had it for about 3 months and sold it only because I had an opportunity to upgrade to a delta hybrid saw which you see in my later videos. But the guy who bought it has no problems almost a year later.

[@johnasaro4342]

Nice job fence costs more than they saw

[@davem5843]

nice info - great video. now it been a year, how do you rate your fence? would you buy it again? Some reviews say the machining isn't that good. rough edges and such. please reply. Thank You

[@AnthonyScolaro1]

DAVE M I sold this saw to a friend and upgraded to a delta about 9 months ago so I haven't owned this saw enough to comment on how the fence held up, but the guy I sold it to loves it. He also doesn't use it as much as I use a table saw.

[@douglasbrinkmeyer4734]

Step drilling is good. However, a trick to keep your hole centered on your punch when hand drilling is to use an 1/8 bit and make a divot in your center punch spot. The 1/8 is easier to keep in the punch center, you don't have drill it all the way thru. It will help keep the 1/4 inch from wondering any. Other wise this fence looks like something I need.

[@canario430]

Hi friend, where you can get the extension of the saw guide, I mean, where the rule fits

[@AnthonyScolaro1]

jose luis romero sosa Amazon

[@andrewgonzales3715]

also is this the same as the Delta extension they offer from home depo

[@AnthonyScolaro1]

Andrew Gonzales it's kinda like the beisemeyer from delta

[@jameslatimer3600]

Now that I have a celar view of the existing insert I know your saw has exactly the same insert.

[@themagnet61]

After watching the video you made on Rigid Table Saw r4513, I am sold, and it is cheaper then the Dewalt

[@AnthonyScolaro1]

Peter Trentacoste it's a good contractor saw but if your looking for a saw for your shop, I suggest spending more and getting a hybrid table saw. Like the delta, sawstop, powermatic or even grizzly

[@AnthonyScolaro1]

Peter Trentacoste I grew out of this saw and upgraded about 10 months ago to a hybrid/ cabinet saw

[@themagnet61]

Not sure if my comment went through. I wanted to thank you for the advice, since I am retired I like working in my shop. I see you are a guitar player and I am one also. I have 50 plus years of playing.When I lived in the Bronx we had a band together in 1964 and played the New York Worlds Fair.

[@AnthonyScolaro1]

Peter Trentacoste very cool. I have been playing since 91' but recently with all the woodworking, I haven't had time to practice as much as I would like.

[@30smsuperstrat]

Anthony Scolaro when you say you grew out of the saw are you saying you were just cutting larger stock, or your needs for greater accuracy demanded a different saw?

[@mrjoker8608]

hello sir, why you don't use INCRA table saw fence ????

[@AnthonyScolaro1]

Mr Joker I sold this table saw 9 months ago

[@gregl2249]

the price?

[@AnthonyScolaro1]

greg l the 53 inch is $349.99, the 36 inch about $249.00 but those prices are from over a year ago.

[@eric_hates_the_poor]

I have had the same saw for about 3 years and never even tried that lever at 0:09 . Fuck.

[@scottcountryman6090]

Lock tight should be used

[@AnthonyScolaro1]

6 years and still hasn’t come loose 🤔

[@MAGAMAN]

Should have bought a better saw before you bought the fence.