Hey everyone, here’s an extra video today of using the Anycubic Photon resin printer. 👍🏻 You won’t want to miss next Thursday’s video as I’ll be making something really fun for you all 🤔 stay safe and have a happy weekend!
@stinkwolf864 жыл бұрын
You stay safe too friend.
@raistlarn4 жыл бұрын
So that instruction manual that's written in chinese has an inside layer that's written in english. I was in the wtf boat until I noticed it started to open.
@yoshi10012303 жыл бұрын
There is a film cover on the LCD, that needs to be removed right? (the UV LCD)
@purplecricketthunder39564 жыл бұрын
The resin plate has a notch cut out of one corner so you can pour the extra resin back in the bottle.
@gavnott45634 жыл бұрын
Purple Cricket Thunder I saw that too
@miikeydobodobo53044 жыл бұрын
lol first thing i noticed hahah i was like what you doing bro pour the other way!
@Jemanzanares6403 жыл бұрын
I too have noticed this right away lol I was just confused lol
@alexandrasun98213 жыл бұрын
and also there is a filter , that comes with the printer, for the resin, he havent mentioned.....
@7777AKE2 жыл бұрын
lol
@clintonmills30874 жыл бұрын
Is it just me or did you just completely ignore the pour spout on the bottom reservoir as you poured it back into the bottle? Lol
@Bforgie23 жыл бұрын
And @ 2:05 the pack of funnels....with integrated filters.
@saxybison3 жыл бұрын
yeah...
@cheesefries74363 жыл бұрын
should have filtered it too
@garyfairbrother57303 жыл бұрын
I love that the resin vat has a corner for easy pour but he decided to use a different corner and make it difficult to put back in the container
@snakeplissken19643 жыл бұрын
The instructions now have English on one side, and you are meant to pull off the protective film inside so you can see the print.
@Charlielizard4 жыл бұрын
I really appreciate the review. The only thing I was going to point out...someone already done so, the pour spout on the resin tray. Can't wait to see what you come up with. Thanks again!
@Phatbytes3 жыл бұрын
That levelling process made me sad
@andie_pants4 жыл бұрын
Anyone else watch Beyond 2000 on Discovery Channel back in the 90s? I remember they did a segment about a UV resin printer and I thought that was the coolest shit I'd ever seen in my life. 25 years later, and it's still pretty much the coolest shit I've ever seen in my life. :-P
@dooleyknoted59514 жыл бұрын
9:15 There is an actual pour spout on the opposite corner of the resin reservoir!😎
@chrisp8663 жыл бұрын
set it up properly next time maybe start with the door knob
@captinnismo65754 жыл бұрын
Just bought my first 3d printer. I'm really excited to learn how to design and print
@bigstackD4 жыл бұрын
Damn that came out bloody mint👌🏻😁. When you said to me it printed really good I didn’t think it would be that good. I might have to get one in the future but I need to find me a Kiln first and their like Hens Teeth in Australia 🤔
@ArtByAdrock4 жыл бұрын
Yeah the quality is fantastic! Get the kiln first though as you can still burn out the pla 👍🏻
@alexandrasun98213 жыл бұрын
@@ArtByAdrock can you burn the resin ? i mean this liquid resin ? that you use in anycubic 3d resin printer
@shaneyork3004 жыл бұрын
I'm impressed with all of what I've seen on your channel so far!! I have a strong feeling that you will be a channel that go over a million subs!! And I don't think it will take to long, maybe a couple more years!! Have a GREAT Day!!!
@apjpl3 жыл бұрын
Notice the very visible notch on the OPPOSITE side of the metal resin vat, specially designed for pouring out resin...
@Anna-ku9xk3 жыл бұрын
Great video but I would always of put gloves on as resin is toxic
@GrandizerGo4 жыл бұрын
It sure looks like there is a groove cut into one corner of the reservoir to make it easier to pour the resin back into the container... In the video it is in the front right corner your right hand is on when you take it out, but in the back left corner as you put the empty tray back in the unit.
@Thewulf564 жыл бұрын
looks great. Thanks for the review. 1 day I might get one. looks really good to print really detailed small stuff.
@ArtByAdrock4 жыл бұрын
Yeah they print in fantastic detail 👍🏻 I highly recommend one
@donniebrown28964 жыл бұрын
If this was anyone else, naw, but if Adam likes it I love it. Old man syndrome, you lost me when you opened the box, lol. Want to see you cast that first cube 😵😜. Anyway, 👍👍 full view even with ads.
@captainjerk4 жыл бұрын
You can probably use the translator on your phone to figure out what the instructions are telling you. The ap lets you point the camera phone at the paper, and it translates on the screen. Nice print buddy! No seams, and no flashing! Seems pretty easy to use, and clean. I would love to get something like that! :D Tanx for a cool vid Adam!
@ArtByAdrock4 жыл бұрын
I’m to lazy to do all that work 🤣 I just guessed based on my other printer 🤷🏻♂️
@captainjerk4 жыл бұрын
@@ArtByAdrock Cheers bud! :D
@brunocabral15784 жыл бұрын
@@ArtByAdrock Mine came with english instructions on the back side of the folder, when you open it like an A4 folded sheet. Did you noticed if your folder is thick? Perhaps your's have the english instructions too!
@davelordy2 жыл бұрын
The resin vat has a spout for pouring the resin back into the bottle . . . it's pretty obvious, surprised you missed it. Also you forgot to peel off the white protective film from the insides of the cabinet windows . . . it's good to be able to monitor a print, the windows are designed to be see-through.
@RedCometNurse4 жыл бұрын
I just got mine a couple weeks ago! Resin finally arrived yesterday.
@amandaebarb85703 жыл бұрын
You could make a lot of keychains , Star Wars figurines , the possibilities are endless .
@terraxcell3 жыл бұрын
So in looking into getting my first 3D printer. Would this def be a good choice? It’s $190 on amazon. Also as far as ventilation what does that exactly mean? Got 2 lil kids don’t want to poison them all 🤣
@stinkwolf864 жыл бұрын
Its nice to hear your voice finally
@mort6539 Жыл бұрын
I was just given the same one, used condition and I have done everything in the video but I can’t get it to print the files. I’m not a tech person, I was just randomly given this, I have no idea why it’s not working. I’ve loosely been reading the manual and watching/reading tutorials.
@HazedShaman3 жыл бұрын
What did you do for ventilation for your printer? I’ve heard resin is very dangerous fume.
@mbahadirb4 жыл бұрын
Very nice video. Thanks a lot. I bought my own and waiting for delivery.
@jakes62944 жыл бұрын
Love your videos keep it up.
@individualone4 жыл бұрын
Just got my Kelant s400s last week...the vat is huge! Buying an Anycubic Photon today for smaller prints..besides I dnt wanna have to fill the Kelants large vat for a small print even if I run low on resin I would be challenged to print having to fill a large vat
@glp.13372 жыл бұрын
I'm pretty sure the instructions are in English, if you like open the manual and turn it around...
@bigcountryscrapper68854 жыл бұрын
Great video
@papalickitysplit16012 жыл бұрын
Does anyone know where i can find the replacement stepper motor?
@Theretrosaint3 жыл бұрын
Thank you for this video ☺️
@smokeyspock4 жыл бұрын
Yes 4th and hi i like these types of videos very helpful
@thadeuisdeanlucas54913 жыл бұрын
Nice review bro,but I confuse which 3d printers should I buy,can compare. The photon printer to elegoo printer?
@vaqifverdiyev95304 жыл бұрын
Hello İ am from Azerbaijan
@kitkat41893 жыл бұрын
No one cares where you’re from
@brunocabral15784 жыл бұрын
Mine came with a single headless screw that I could not find use for. Any hints?
@VividThyme3 жыл бұрын
As a person who doesn't use computers often, I deleted the stuff in the flash drive... What do I do?
@kodiakblair22013 жыл бұрын
Go to the Anycubic webpage and download the files again. Manual, firmware and slicer software are all available from the support section. If my memory is correct it's top right of the page.
@American_Innovation4 жыл бұрын
I love my Anycubic i3 mega it’s no resin printer but I does the job maybe when I get into lost wax casting I’ll buy one of thos thx for the review
@mustbee-bike9944 жыл бұрын
that is not the right corner to pour it back look there is a carved corner for pouring
@uahcuriositylab16313 жыл бұрын
Superb video ma thanks
@zukabanana3 жыл бұрын
when you say cleaning the plate and the other part, just after printing at 9:35, you just use water to clean it ? or is there a special product to use to protect the plate or something ?
@OFFROADDAN3 жыл бұрын
Can you use any brand of Resin?
@timswords98363 жыл бұрын
How many prints are you getting from one bottle?
@strangerjank3445 Жыл бұрын
i have a question, i found a anycubic photon fully functional ony issue is the vat is missing, i cant find any in stock on any site so that is out of the question, i did find stl files of th evat and stuff online and sized it up to the specs can i 3d print a vat on my fdm printer and use it functional and have no issues i wanna know before i attempt to print it as you all have more exp. thank you if your able to reply back.
@guts89093 жыл бұрын
Can i keep the unused resin in the printer ?
@vao8794 жыл бұрын
9:03 that opposite corner
@kenswireart884 жыл бұрын
What type of 3d printer utilizers those wires type printer material? It's my first time buying a 3d printer and that's what I wanted but didn't realize there was a difference? How bout if u wanted to printer a something that has multiple colors do u buy different color resins? Thanks for the video...
@ArtByAdrock4 жыл бұрын
That’s an fdm printer that uses filament. And yes if you wanted different colors you would need to buy multiple colors and pause when you want to switch
@kornshadow0974 жыл бұрын
Mine came with totally blocked windows n they aren't see through... I haven't been able to remove the seemingly protective film... Can't even use my nail to peel it... Did they change the windows to white ?? Gonna try a bit harder...
@astroman7474 жыл бұрын
No the windows are still clear
@Cottermanrocks3 жыл бұрын
I am brand new to resin printing (and 3d printing in general). I just received my Anycubic Photon today and have been looking up different guides and videos on how to use it. In your video, you printed the Anycubic test print but didn't mention anything about cleaning it and curing it. Does this printer automatically do that, or is this still a necessary step after removing the print from the print bed? Sorry if this is a dumb question, again I am completely new at this. Thank you!
@ArtByAdrock3 жыл бұрын
It all depends on the resin you have. Some are water washable so just rinse them and some need post curing. You’ll need a curing machine (like $39) or a UV light to cure them fully afterwards if necessary. The printer itself won’t do that. Hope that helps a little
@Cottermanrocks3 жыл бұрын
@@ArtByAdrock It does, thank you so much!
@kitkat41893 жыл бұрын
Why doesn’t mine work like this?
@mkbman454 жыл бұрын
Did you give a price for it?
@divyajnana4 жыл бұрын
Great video, thanks for the tips. Let us see if I can be successful.
@apexjeep88613 жыл бұрын
it looks like there was a spot to pour out of and he poured out of the opposite side
@kensaiix3 жыл бұрын
9:05 pouring aid. right-hand side.
@skezburah3 жыл бұрын
has a pouring spot in the corner of the tray...uses the other side lol
@raziel37264 жыл бұрын
Craftsman!!
@RoeMantic4 жыл бұрын
A company selling resin printers made of printed resin and a few wires and a screen. Can someone say genius lol!