Whirlpool Top-load Washer Leaks from Bottom while Filling

If your Whirlpool top-load washer leaks water from the bottom while filling, the most likely cause is a cracked drain pump. How to replace a Whirlpool drain motor pump on a top-load washing machine.
Other causes could be improperly loaded clothing or blankets, less common causes could be cracked tub, loose hose connections to pump, rip in line, water fill dispenser blocked or obstructed, washing machine extremely un-level.
Whirlpool Washing Machine Model #LXR7244PQO
OEM Drain Motor Pump Part #WP3363394 - Get yours fast here amzn.to/3tj3ob4
As an Amazon affiliate I may receive commission from qualifying purchases

[@domcirillo4174]

Saved my ass. Really didn’t want to have to disconnect the hoses and take the cabinet off. Managed to change the pump in 10 minutes, 7 of which were spent trying to find pliers big enough to unhook the clamps 😂. Thanks bud

[@__WJK__]

Well done! Another video recomended removing the control panel assembly AND the giant steel housing panel "why" I do not know, especially considering how easy it is to access the water pump by simply tipping the washer backward. Thanks for sharing the video, you saved me a ton of time and aggravation!

[@jhubbard49]

OMG! I was literally 5 minutes away from going to look for a new washer and dryer set because mine are old and have had a few prior repairs. I thought for sure I was going to have to either put a few hundred more dollars into calling a repair person vs just biting the bullet and buying a new set. I just HAPPENED to find your video and thought "hey, I can do that. It's worth a try!" I was lucky to find a pump replacement at a local appliance repair shop, and the rest is history! I'm currently washing a load of towels, and no more leak!! A million thanks to you!

[@ApartmentMaintenancePro]

This is why the tradesmen hate me 😆 Good work !

[@brianwagner9518]

the best video ive seen so far on youtube everyone is taking the shell off this is so much better. my pump comes monday ty sir for this

[@ApartmentMaintenancePro]

Thanks Brain let us know how the repair goes

[@brianwagner9518]

@@ApartmentMaintenancePro i will thx

[@ebay2291]

You sir have saved me time and money thank you for your video

[@giantessmaria]

a man of many words ;) ......thanks for the great info!

[@merylmcwhirt-myers3646]

Lol I read that before I watched it and thought great he talks too much 😂😂😂😂

[@nicokek7761]

Great video

[@johnniedement4358]

Thank you very much!🎉

[@robertberlinguette3651]

Le meilleur vidéo le plus simple..bravo merçi

[@malikburhan87]

Good job

[@MikeKalasnik]

Speaking vs the captions would be a bit more helpful when trying to watch and repair! But this looks to be my issue as well with my washer.

[@MindfulMusic]

Water is leaking under my Whirlpool top load washer, but it isn't the pump. I replaced the drain pump (my model doesn't have a recirculation pump, so drain only) and it's still leaking whilst filling / spilling. My guess is leaking tub seal that needs replacing now.

[@ApartmentMaintenancePro]

Usually, when the drum is cracked, you can see rust where the transmission is underneath and usually wet once running for a bit. Also check fill water supply but hard to tell without being there

[@psychoJIMstunts]

Whirlpool washer here, changed pump based on video, and it still dumps when on fill stage. Suggestions? Where do I check the tub? Also, never did this until I moved it down stairs and up ro new unit on second floor, with a dolly. So a little bumpy while going up/down stairs.

[@honolulu1476]

How do you find part number you need to replace ? Thanks

[@mj-ls7qr8xp3n]

This washer is only a few months old. I'm noticing water on left side of washer when it drains. Could it be a drain pump already?? New in August 2023, 4 months old. Whirlpool top loader. And the less, cough, expensive one.

[@marcosmendez8805]

The only problem I have is mine has water inside 🤨 not where you put the clothes but I mean inside inside idk if I should take it apart

[@justjosie8963]

This makes it look fairly easy. What kind of tool was used to unclip & clip those clamp thingies?

[@12345682900]

Those black, thin clamps (2) really don't require any tools to remove or install. But if you do need help, a flat-headed screwdriver (as a pry-bar) will work just fine.

[@elegant6066]

While seeing this vid again, I am curious as to what was wrong with the pump such as cracked, or where the drive shaft goes in from the motor. What causes these to fail in you experience? Thanks again. PS I really couldn't see where the water was dripping from. Seemed like it was in the front facing outward, a crack?

[@ApartmentMaintenancePro]

Hard to tell. Everything is designed to fail sooner or later. Install, transportation and quality of material used play a role

[@elegant6066]

@@ApartmentMaintenancePro Wish you were here to help. Thanks for the reply.

[@elegant6066]

My Kitchenaide top load washer (very old but a goodie) is leaking from bottom. I tried an experiment. With the machine in off position I poured about 15 gallons into the empty tub. I sat on a chair and then slowly water came out from under. Again, the machine was off. I'm an old lady but sure like to know how things work. Would it be the drain pump if the machine is in off position or other causes? What next should I check for? I really enjoy seeing your work. You make it look so easy. Cheers from S.CA PS...It is direct drive.

[@ApartmentMaintenancePro]

It could be leaking from the drain pump or the transmission itself. Rust stains will usually point to the exact location :)

[@elegant6066]

@@ApartmentMaintenancePro Thanks for the reply. I didn't think the drain pump would be the culprit if it was not turned on. Interesting. Do you have vids that show where the transmision is located and why would it leak from there? I thought the trans was just electric. Thank you so much. Have a wonderful day.

[@jordanlawson6132]

Hey man I have a customer who has a whirlpool very similar to this. It leaks out the bottom but only when she does like two larger loads back to back and it leaks a lot of water. If she does a small load and then let’s the machine rest for awhile before doing another small load it runs fine . I’m going back in a couple days to poke around further. All I had time to do was snake the washer drainpipe in the wall and check the drain hose on washer. Didn’t find any obstructions. Any ideas? Or just replace the $25 drain pump? What do you charge labor to replace pump? More or less. Thankyou

[@ApartmentMaintenancePro]

Drain pump should be a quick repair so that’s up to you. Although less common with whirlpool, ensure the drum isn’t cracked and leaking from there 👍

[@user-np3et5rk6m]

Any suggestions on how to remove the pump if it's stuck to the shaft? I unlatched the clips; the pump won't come off.

[@lashelewis3745]

😊

[@clevettacarter3971]

My machine wasn't on but water was all over the floor Turn the water off the floor dried up

[@robertmin7233]

Hi, I just replaced the drain pump on my Whirlpool and there's still a leak coming from the front

[@ApartmentMaintenancePro]

These drain pumps usually leak due to small cracks. Make sure it’s aligned properly

[@jenniferm1539]

Same, having the same issue. Not a lot of water like last time

[@roselove7647]

Hay man I don't have a lot of cash but I don't no how to fix my washer like is not that part why it's leaking it's the lil black tube at the top rats ate it idk how to replace are fix it

[@flores.mp3528]

Exactly what I except it’s not rats for me

[@beajbrow4230]

This my problem on my portable washer she a big girl to be portable lol

[@alicethaemert8040]

Cost?

[@jimwilliams622]

Commentary by Helen Keller

[@ApartmentMaintenance]

Nice repair bro 💪 I miss working on Whirlpool appliances. Everything is GE at my property which they aren't bad to work on, but I'm just a Whirlpool fan. I've done so many of those drain pumps & motor couplings on the direct drive washers like the one you just repaired in the video. Keep the vids coming 👍

[@ApartmentMaintenancePro]

Thanks man. I too like Whirlpool over GE, especially when it comes to repairs. Although lately getting parts for Whirlpool and GE appliances has been near impossible as of late.