4.3 Spider Injector replacement in The Audiopipe Blazer

[@SoutheastOhioSolarHaven]

Its nice to be able to work on your own stuff. Makes it cheaper !

[@Basscop]

Most definitely! Not that this is real hard to do if you know what your doing. It is a time consuming process, and I can imagine what the labor rate would be at a shop on a job like this. Add the cost of parts, etc. yes it's nice to be able to do it yourself!

[@thenotoriousrvh6091]

That looked like a freaking nightmare, good job.

[@Basscop]

Thanks!

[@unkowntrooper1657]

Done this before, about to do it again, also doing a 4.3 engine tear out now on my bagged s10

[@Basscop]

Nice!

[@woodgrain18]

You should do a 5.3 or 4.8 and 4l60 trans swap with a comp thumper cam. It would definitely get it down the road a better and sound just as cool as the bass when you're idling charging your batterys lol

[@Basscop]

Depending on how long I keep it, that has always been a plan to V8 swap it!

[@mrniceguy8310]

Did you get any check engine lights or code when this went bad?

[@UpsideDownKid222]

Think mine has been doing the same thing for about a year now.. All of the same symptoms and everything.. I’am not looking for to doing this.. Thats why i’m just gonna pay you to do it!! 😁

[@Basscop]

🤣🤣🤣 bring it down!!

[@crabapple6775]

how long did it take for the sensors to readjust ? How many starts , miles ?

[@ChickenJoe24]

Great video! If your handy with a wrench this could be done in a day if all materials were together beforehand. Random question concerning the sky high car audio aluminum battery top post distribution blocks; what do you clean them with /coat them with to protect against corrosion??

[@Basscop]

The post usually come with a costing on them. However it still doesn't prevent corrosion from mixing metals. In the past I've just used Never Dull to keep them clean. I'm doing a front battery delete soon using an empty case and will be putting in new terminals

[@ChickenJoe24]

@@Basscop cant wait to see how that turns out! Looking into never dull asap. I have the same blocks and they corroded quick here in Florida. Thought about using liquid electrical tape or dielectric grease but both of those options sound greasy and messy! Thanks for the content and the quick response.

[@Basscop]

Oh! Florida, salty humid air! Other than quite frequently cleaning them im not sure what you could do to prevent that. You may try masking everything off around them and hitting them with some clear coat. They "may" slow it down, but not sure on that!

[@ChickenJoe24]

@@Basscop I had an older bass head friend of my dad and uncles mention varnishing them. But that doesnt sound easy to do either

[@andyb1185]

Your blazer must be atleast 2002.5 or a 2003, there is no egr on it. The valve would be located in that large blank area next to where the thermostat is

[@InsideOfMyOwnMind]

Needs another alternator between the one where the AC goes and the one where the idler goes.😋 How much are each of those rated for anyways?

[@Basscop]

320 amps

[@InsideOfMyOwnMind]

@@Basscop DANG! Those are the biggest ones I've ever heard of.

[@Basscop]

You can get bigger than that! These are necessary for the electrical to run the my car audio

[@Big_Hustler_82]

Thanks for the video going to be this sometime soon for a vehicle. Where did you get the spider pack from? Thank you

[@Basscop]

Rock Auto was the cheapest I found it.

[@rogermerritt6470]

I'm about to replace my spider injectors. Got a Chinese fuel injector kit for my Suburban. The tubes seem to be hard to bend. Any experience with those from China?

[@Basscop]

Can't say I do, unless mine is Chinese 🤷‍♂️ but mine were pretty flexible

[@rogermerritt6470]

@@Basscop I got one side where the tubes dont want to swivel. Added some oil to it and will force it on around. If it breaks I'll send it back. Came in a plain brown box with no manufacture name.

[@Basscop]

Sometimes you just can't go the cheap route!

[@rogermerritt6470]

@@Basscop You are right there. The seller was located in USA so thought it would be ok. One question, what is that white wire on the plug going into the fuel injector housing?

[@psementalist]

What's going on basscop 👮‍♂️🎛🔊 Are they even still having Slamology this yr ? I have yet to see a cancellation of postponed on the show as a yet . Excellent video topic of choice for discussion and content how to do it yourself 😀👍

[@Basscop]

As far as I know it's still on!

[@i_am_wi11_]

I have a 06 4.3 and it doesn’t have the return line hole and I ordered one and it came with the return line hole and now gas comes out of there

[@jasonasian3950]

You must have one heck of a stereo in there

[@u.s.a.198]

Thank you for video!

[@Basscop]

Your welcome!!

[@brianmueller5168]

Where did you get the fuel injectors from? Nice ride btw

[@Basscop]

Rockauto.com

[@joneastman5627]

If I had a dollar for every time I heard missing my 10mm whatever 🤣

[@Basscop]

🤣🤣

[@woodgrain18]

5.3's have 8 ev1 style injectors and fuel rails up top.

[@Basscop]

Yeah that's my bad, I didn't realize I said 5.3 until I edited the video when I meant to say 5.7 🤣🤣

[@woodgrain18]

@@Basscop it's cool everybody makes mistakes from time to time, but I do have a question about the audiopipe tspp312d4 12's I have looked every where on the internet to find out how many cubic feet they need in a vented box? I recently picked up four of them for 150 bucks and need to box built yesterday.

[@Basscop]

1.75 to 2.0 cubic feet per sub in a vented enclosure

[@walkingfreak]

I hear korn in the background i like that haha. Well did the routing of the injector tubes a little funny but hey made it work. Getting that plenum under the main harness is a total pain in the ASS

[@Basscop]

I like my Korn for sure! Yes, that was the only way I could get it in there, and yes getting the plenum back on is a major pain!

[@walkingfreak]

@@Basscop At least you only have to do it once. I have to do it twice on both my blazers.

[@g-track5065]

mine are hard as hell to snap in i clean the ports and grease them still hard!!!!! what do I do?

[@Basscop]

Idk, I've never had an issue snapping them in, unless you have the wrong part

[@eddiegx2]

That what mine needs damn mechanics want $900 to replace it

[@likescars6210]

what is that three alternators?

[@Basscop]

Yep! 3 of them!

[@psementalist]

I was told we are not happy Slammin 4 soldiers show?

[@davidkline03]

All the other videos i watched totally sucked, too bad this one didn't pop up first.

[@albertcassler8763]

Torque it down till it strips, then back it off a half turn...🤗

[@garycole42]

Why didn't you install the spider injection system on camera so we can see how to do it I sat here and watch this for nothing thank you

[@lindacook891]

Good grief junior just pick the damn thing up an throw it to the ground instead of flopping it around like a wet cat!

[@crabapple6775]

? ? ? ? ? ?