A very comprehensive tutorial. Thank you for your time and effort.
@applelover534 жыл бұрын
You're very welcome!
@pegburke6384 жыл бұрын
WOW! I've always done this in Illustrator - this saves me a couple steps. Thanks!
@applelover534 жыл бұрын
Glad it helped!
@sianevans41364 жыл бұрын
Great demo - thanks Ashley - the font is still available on the website and free for personal use
@karincotter65724 жыл бұрын
This is brilliant! This is the first video I've seen for this that makes sense! Thank you
@applelover534 жыл бұрын
Glad it was helpful!
@csterls4 жыл бұрын
Great tutorial. Thanks for sharing your amazing knowledge.
@applelover534 жыл бұрын
My pleasure!
@sidoni76664 жыл бұрын
Very good idea... thanks
@applelover534 жыл бұрын
Most welcome 😊
@suesmith46814 жыл бұрын
Love this - thank you Ashley
@magswilkie2124 жыл бұрын
Ashley, really like this idea. I'll have a look at what dingbats are on my laptop. Having a rest from the camera today. 💜🤣🤣
@applelover534 жыл бұрын
You may already have dingbats if not if you go to dafont.com there is a dingbat section you can scroll through and download any that you like and try them out have fun
@magswilkie2124 жыл бұрын
@@applelover53 Ashley yes when you mentioned Europe underground font, I added dafonts to my bookmarks
@applelover534 жыл бұрын
I only ever get my fonts from Dafont
@JoanOrloffDK4 жыл бұрын
Stunning card 😍 I love it, great tutorial ❤ thanks for sharing your creativity Hugs
@applelover534 жыл бұрын
Thanks so much!
@nancycolpitts30424 жыл бұрын
Fantastic!
@applelover534 жыл бұрын
Glad you like it!
@dawson2804 жыл бұрын
Thanks for the information about the fonts that's a great idea.. love it.
@applelover534 жыл бұрын
You are so welcome!
@annettewornin76834 жыл бұрын
Great tutorial thankyou
@applelover534 жыл бұрын
Glad you liked it
@pattyh24104 жыл бұрын
Thanks so much! Very helpful!
@applelover534 жыл бұрын
Thank you
@marilynlynskey20054 жыл бұрын
Thank you as I had no ideal that this could be don.
@applelover534 жыл бұрын
You are welcome dingbat fonts are great especially for techniques like this
@TJnannie14 жыл бұрын
LOVE IT
@MerCrafts4 жыл бұрын
Wooww, precioso, donde compras el pegamento y la cinta de doble cara!!!
@applelover534 жыл бұрын
Its stampin up product that i sell in my online shop but we do not ship to spain, sorry.
@sharonharris93734 жыл бұрын
Hi, thanks again for the great tutorial. I had the same problem as a few others in that I kept getting the error code regarding overlapping lines. Upon close inspection of the individual flowers that came up with the dingbat E there were overlapping lines in the centre parts of the petals. When I corrected the lines using the nodes I could no longer use it as a "text" feature therefore couldn't do 'text on shape'. I am unsure why you didn't have this problem as we were using the same capital E in the same dingbat font (Sarus). Maybe the software features of our computers made it draw differently to your computer?? So no luck with this one. I can however, achieve the same result just using the flower as a shape and positioning it around a circle the normal way. Cheers and thank you.
@applelover534 жыл бұрын
Hi thank you, have you seen the updated video i posted a couple of days later i found a simple work around that seems to work for everyone now?
@sharonharris93734 жыл бұрын
@@applelover53 hi No I haven't seen that sorry, will have a look for it today. Cheers x
@JuliesPapercraft4 жыл бұрын
I have just tried this but I wanted more flowers on my circle, I used 17 flowers which meant they overlapped. When I tried to weld them it would not weld saying some lines overlap. Do you have any suggestions on how I can have overlapping flowers on the circle. Love your tutorials, thank you for all the inspiration
@applelover534 жыл бұрын
just play around with the size of the circle it may need to be bigger depending on how many flowers you use. also although your flowers need to overlap they cannot overlap in more than one place
@JuliesPapercraft4 жыл бұрын
@@applelover53 I had 17 flowers around a 3" circle and the flowers overlapped each other in lots of places. I have got it to work with 10 flowers. Will continue to play around with it tomorrow, it's almost midnight here in Australia.
@applelover534 жыл бұрын
Yes 17 flowers on a 3inch circle is too many that cannot overlap in several places or you will get that message. you have to play about with what size shape and flowers and what flower letter too. but its fun to try it out and learn as you go. thank you.
@christineshirbin67364 жыл бұрын
I am following your instructions step by step as you go along, when it comes to welding the flowers to the circle I keep getting this message E92001 which says there is a path open. Can you help?
@applelover534 жыл бұрын
That message normally means you have got too many shapes overlapping in more than one place or The flower edges are not overlapping the circle enough zoom in and check they are all completely overlapped
@lyndanewman16344 жыл бұрын
Thank you great video but is it possible to write rather than cut the text . Lynda in Spain
@applelover534 жыл бұрын
You can write any text with your scanncut machine just change the cut line to a draw line
@carolinabnitt7264 жыл бұрын
I'm following along with your video and doing exactly as you're doing, same measurements and everything.When I try to weld it gives me error E92001 Operation not allowed. The selected objects include open paths or self-intersecting paths. I cannot figure out what I'm doing wrong. Can you help?
@carolinabnitt7264 жыл бұрын
Just read your comment from another person about this same issue, I'll try again
@applelover534 жыл бұрын
are you using the same flower and the same number and the same size circle, as that message usually means the shapes are overlapping too much they can only overlap each other in one place. Or it could mean that your flower petals are not overlapping your inner circle enough they cannot just be touching they have to overlap zoom in on all the leaves and make sure they are all overlapping the circle It should work ive used this technique for years. I even tried it on an very old Windows 7 computer yesterday and it was fine. just play around with it, try a different size circle and flower
@carolinabnitt7264 жыл бұрын
Well, I got it to weld, now I'm getting pretty much the same error when trying to do the offset!
@applelover534 жыл бұрын
keep playing about with it, it does work, make sure your flower petals are overlapping your circle edge, they cannot just be touching they have to overlap, make your circle slightly bigger before welding like i show in the video. the results also depend on what size circle you start with and how many flowers, also ive discovered if using Windows PC you have to do everything in one go without any mistakes it can be temperamental if you dont.
@1962Blitz4 жыл бұрын
Thanks for this tutorial. I was following along but when I went to weld my flowers tot he circle I got error code E92001: Operation not allowed. The selected objects include open paths or intersecting paths. Can you help?
@applelover534 жыл бұрын
Where are you using the exact same size as me and the exact flower and same number of flowers
@1962Blitz4 жыл бұрын
@@applelover53 yes
@applelover534 жыл бұрын
Did you see the updated video I posted a couple of days after this one, i found a simple work around that seems to work for everyone now?
@applelover534 жыл бұрын
Did you see the updated video I posted a couple of days after this one, i found a simple work around that seems to work for everyone now?
@1962Blitz4 жыл бұрын
@@applelover53 Thanks
@susannaylor14164 жыл бұрын
HELP. I have followed this tutorial to the letter. I get to the point of welding the flowers to the circle and I get an error message " selected objects include open paths or self intersecting paths". I have spent hours trying to resize the inner circle so that it just overlaps the petals by a small amount be nothing I do seems to work.
@applelover534 жыл бұрын
It may be that your flowers are overlapping too much they need to overlap but only on one edge not intersecting if that makes sense it does work I’ve use this technique for years in other software
@patriley57624 жыл бұрын
I keep getting the error message E92001 when im trying to do the offset what am i doing wrong using the same sizes and fonts as yours, thanks
@applelover534 жыл бұрын
I honestly don’t know it worked fine for me when making the video, but I tried I tonight in my KZbin live and it wouldn’t make an offset. However when I came off the live I tried it again with a 6” circle and 15 E’s and it worked and made an offset too. So I think it needs playing about with to try out different combinations of circle size and number of flowers
@patriley57624 жыл бұрын
@@applelover53 Thanks for your great videos i will keep trying if at first we don't succeed try, try again. :)
@applelover534 жыл бұрын
Hi don't waste any more time with it ive figured out an alternative process that works consistently so far, the updated video will be live on my youtube channel on Friday morning 3rd April hopefully it will work for everyone. Thank you
@brendariddle52884 жыл бұрын
When I to weld it gives me and error I've redone it several times from the beginning and still the same error E92001 Operation not allowed. The selected objects include open paths or self-intersecting paths. I have checked and rechecked to make sure that each petal circle is within the other circle. HELP! Everyone please remember to like her videos, she does such a wonderful job!!! I did find the updated video still with no success.... I don''t know what to do?
@jnnfrgs14 жыл бұрын
Sorry but the design reminds me of the corona virus!😳
@applelover534 жыл бұрын
🙈oh no, the video was made and scheduled weeks ago LOL