Whirlpool Microwave Repair - Not Heating - Magnatron

This video shows you how to Repair a WMH31017AS2 Whirlpool Microwave W10693025 Magnatron
Symptoms may include: Not Heating
View this video on our site: www.appliancev...
This Whirlpool repair could apply to multiple brands: such as Whirlpool, Amana, Maytag, Roper, KitchenAid, Jenn-Air, Kenmore, Magic Chef, Admiral, Norge, and Crosley
ApplianceVideo.com provides repair and diagnostic videos on *Major Appliances*. Our videos have been produced and reviewed by our factory certified technicians with over 30 years of infield experience. From the Do-it-yourselfer to the senior tech, our videos guide you step-by-step so you can successfully diagnose and fix your appliances with ease.
Fix it Yourself and Do it Right the First Time
Visit us at: www.appliancev...
If we helped you, please support us and Subscribe to our channel!
www.youtube.co...
Or send us a tip, so we can keep making free Appliance Repair videos
Paypal: www.paypal.com...

[@fusehenry]

Absolutely perfect video. A+! This might be the only video I’ve ever seen where I didn’t have at least one critique for it. No excess talking and everything done using best practices. Well done!

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@kurtturnier2973]

8years later in 2023, this video is spot on, step by step, nothing extra , and right to the point! It took a few months only because we forgot to order a new diode at the same time we ordered the magnetron. Otherwise,would have done it in one day. Thank you again!

[@alanmorrow3391]

Must say, this was the best video I seen on this issue!!!!! Very well done. Give that dude a raise!!

[@ambermendenhall9359]

Best “How To” video ever. Straight forward, easy tutorial. A+

[@goedelite]

Everything worked, but the mag would not turn on. I did the easy checks first: the mag-circuit (diode, capacitor, fuse, mag filament, connection to transform HV coil). There were no improper shorts or open circuits. The diode tested well. Then I checked the transformer primary for continuity or shorts. No problem. The HV secondary was 150 ohms to the case. No problem! I suspected that the door interlock that controls the mag was faulty. Now, the struggle began. They snapped-in when connected, and I could not remove them with ordinary tools (needle-nose pliers). I concluded that they were not made to be easily removed. I tried to remove the interlock switches with the leads still connected to them. They were held by plastic retainers that I could not pry out of the way. KZbin has several videos on the magnetrons and other big components. What we amateurs need is advice on how to remove those snapped-in connecting lugs. That, to me, is the hard part.

[@harirazdan9137]

Perhaps the best video I have watched. Thank you very much! It might be helpful to upload a video describing a step-by-step procedure to diagnose where the problem might be.

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 1-million people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@thomasesker448]

Christian, excellent video. With your accurate directions I replace the magnetron, capacitor, diode and fuse. Along with filters and a tray I spent $123 instead of $300 - $400 for a new microwave. From start to finish 1.5 hours including cabinet cleaning. Thank you!

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@diegozenizo3647]

Very clear and precise instruction, congrats! One negative comment: you NEVER EVER work on electrical and mechanical parts with rings and bacelets, specially metallic ones; I've witnessed too many burnt fingers, cuts and shocked (both figurative and electrically speaking) people, you may even risk your life.

[@Appliancevideo]

+Diego Zenizo Thanks for your positive comment. We have helped millions of people repair their own appliances. Please help us produce more videos to our site by subscribing to our KZbin page, or posting our website www.appliancevideo.com/ on your Facebook or Twitter account.

[@rudywachtler2330]

This is the absolute best. You should be #1 for this type of instructive video.

[@mrcoollu9662]

very easy to understand step by step and very informative ..

[@ENGLISMP]

I watched the video as I repaired my microwave and it was perfect!!! Thank you for posting.

[@Appliancevideo]

Thanks for your response, and we are glad we could help. Please help us by subscribing to our KZbin channel or post our website www.ApplianceVideo.com on your Facebook page.

[@whateverbigbruce2209]

Very helpful video, my unit was 18 months old so my opinion is stay away from whirlpool junk, have had several microwaves over the the years first and last time with a whirlpool that’s for sure

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@Tr3Klub06]

Thank you for making this video. I just saved myself some money by replacing the diode and the magnetron.

[@matthardin1612]

Great video was able to replace the parts without any incident and my whirlpool heats again!!! Saved me a ton of $$$$$ thank you!!!

[@Appliancevideo]

+Matt Hardin Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. We have helped millions of people repair their own appliances so please help us produce more videos to our site by subscribing to our KZbin page, or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.

[@jamesmurray6295]

Thank you for the excellent training video - much appreciated. With your help, Whirlpool microwave oven now working just fine. Thank you Lord Jesus!!!!

[@AndyW-e7x]

Excellent video!

[@tipsclubs01]

Great Video, very concise and informative. Good Job. Now I have to determine if the price of the Magnetron and Diode is cost effective to replace or get a new Microwave. Thanks Christian, you make the repair look easy with you Great instructions.

[@marthatracey6200]

Probably the best repair video I've used!! Thanks!!

[@JC-bz6cy]

Perfect instruction of DIY fixing microwave 👍👍👍

[@carloscumins5277]

This is a great video! Even though my microwave was slightly different, I was able to fix my microwave and give it a few more years of life! Thanks Guys!

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@dipak2704]

Perfect angles to all parts and great video

[@busnezz89]

Great job on explaining and showing the actual repair

[@johnniestinson8956]

just replaced my magnetron with your video. Thanks!

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel. Or support our parts department at 1-800-830-5465 and our website www.SaveMoreOnparts.com . This is the only way we can continue to help the over 900,000 people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@naca1022]

Sir you saved me over $700 with this video. I am forever grateful and so is my family. It was a struggle living without a microwave...lol

[@joarlujo1]

Simply excellent video - professional, detailed and clear. Saved me a lot of money. Thanks a lot.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@shawnnathan7658]

Fantastic video, thanks!

[@ArmyRayOIF]

Some diagnostics would be nice. How to determine if they are bad.

[@paulw7770]

Very thorough and easily understood. Thank you.

[@Appliancevideo]

+Paul W Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. We have helped millions of people repair their own appliances so please help us produce more videos to our site by subscribing to our KZbin page, or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.

[@tubejay1]

This was very helpful. Thank you!

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@BassManNv]

Couple things I wish I knew: 1. Even if you have a multimeter, there is a good chance you won’t be able to diagnose which or both are wrong. Spend the ~$120 and get both the magnetron and the diode. 2. Watch the whole video. The reassembly, for instance: it is important to make sure the tabs slide in so that it is flush. I assembled the top three times before I understood why nothing was lining up. 3. Do yourself a favor and test the thing AND clean the bottom before re-installing into your cabinet.

[@christopherwint640]

Excellent video tutorial. Saved me some money!!!!

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@baltimoredrummer1]

Great vid. I'll be doing this soon. Mine is good for no more than 2 mins of cook time then the buzz.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@bgo619]

Do I NEED to replace diode when replacing magnetron? Also if I only replace the magnetron should I still discharge the capacitor?

[@ma6greg]

Always stay safe

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@billblavat2871]

Thank you for this video. You saved me from having to buy a new microwave. Seemingly, food now cooks faster than with the old magnetron when it was working.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page

[@redangrybird7564]

Bill B. How much did you pay for the new magnetron and where did you buy it? Thanks.

[@nicke.3782]

How do you know it's not the capacitor or line fuse? Or for that matter... how do you know its not just the diode or just the magnetron? Why do you assume it's both??? I have this microwave (HS2 version) and it made a popping sound when I started it, and now it does not heat. It's also louder than it used to be. What makes it pop and what makes it hum now? Would those issues narrow down what parts are possibly needed. I don't want to replace the wrong ones.

[@girishshah7147]

Nice video.i have Kenmore 721-85063010 model. It’s not heating and buzzing. Lights are working, vent blowers working good, time showing perfect and turn table is also turning. Do you think magnetron is the only problem or also could be some other problem. Please let me know.

[@BYTCM]

Amazing video. Where would you suggest in order those parts. I called whirlpool and they would sell me the parts. Orginally a lady said I could buy the megatron from her department then I had to transfer to another. Then someone else told me I couldn't. So any references you have would be amazing.

[@erickringo1773]

Hi. I do have this same ovwr the range Whirlpool WMH73L20AS-0 that starts heating after first minute. I was wondering if there is a way to reset that problem or if I have to replace some parts. Within the first 60 seconds it sounds like it is working,it is turning but not heating. Everything works perfect after that minute.

[@girishshah7147]

I have Kenmore 621-85063010 over the counter model. Every things working good except not heating and buzzing sound. Do you thing by changing magnetron it will be back and do you suggest also to install a new diode as well?

[@kimchee94112]

Before replacing parts how do you know it's a bad magnetron and/or diode and not something else?

[@matthewdulaney4960]

Ran into a similar issue. Microwave won’t heat. I changed the capacitor, Megatron transformer, diode infuse still no fix. Microwave/oven is only two years old. Any ideas??

[@dt1mdlara]

Very detailed and well instructed video. Ours is a Kenmore and it looks just like that Whirlpool you got. It just stopped working and I smelled something burnt electrical inside. The light turns on when you open the door, only the two dots in the clock/timer is lit up, but nothing else wants to work. What could be wrong? Thank you very much.

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.

[@ma6greg]

Excellent vid

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@glennphelps9300]

After the component replacements, I would run the microwave to see if it works before putting all the covers back on.

[@chrisfoxwell4128]

Nice video. Will the new magnetron make a tinging noise like the metal fins are expanding and contracting?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

[@dadthefixerflorida]

I replaced the magnetron and the diode and the capacitor. It’s still making the buzzing noise and not heating. What else could it be?

[@mrstanskaggs1]

did you test the parts you replaced, or did you just know they were bad? Do you replace the diode and magnetron always in a pair or was there some criteria to warrant this set? did you not replace the capacitor or why not since the three seem to work as a unit.. I am just trying to figure out if I need to replace one of these components or if I need to do all three or just the diode and magnetron... Can you explain the thought process in deciding these for me? Thanks! Awesome video by the way!

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

[@keithlawson7469]

Good instructions. Why was it necessary to replace the diode? I I've seen other videos that only replace the magnetron and it fixes the issue with it not heating

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel. Or support our parts department at 1-800-830-5465 and our website www.SaveMoreOnparts.com . This is the only way we can continue to help the over 900,000 people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@johnbeekman1396]

I have this same microwave, and it has a problem as follows: if I try to cook something that requires more than about 8-10 minutes, the magnetron seems to cut out (I can tell because the normal 60Hz hum goes away). After about a minute, the magnetron kicks in again. I suspect the magnetron is overheating on a long cooking cycle, the high limit thermostat does its thing, and after a minute the magnetron cools down enough to start up again. Can I assume that replacing the (overheating?) magnetron will fix this problem? Or is it possible the high limit thermostat, or maybe some other component, is defective? Any advice will be much appreciated!

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@thesultanmerchant]

Sir, I have GE brand MV and it is dead , getting no power supply. Have checked all parts with multi meter and its OK Only problem not getting power supply when on. Pl guide. Have checked thoroughly all parts are OK.

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@janechambers9980]

I have a GE microwave just like the one shown. In the top of it, it seems Styrofoam is leaking out. A small hole has developed. Should I just spray some great stuff on the very small hole?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

[@alstevens44]

Nice video tutorial. How much the magnetron cost

[@Appliancevideo]

+alsteven44 With your model number call our parts department at 1-800-830-5465 ..Thanks

[@venugopalbalijepalli8081]

Very nice video.

[@Appliancevideo]

Thanks for your response, and we are glad we could help. Please help us by subscribing to our Facebook page , KZbin channel, or post our website www.ApplianceVideo.com .

[@amirkweider3999]

Good job , I need help please for microwave oven, KitchenAid, 125V , in our country the electricity is 220V , they put it in and damage happened, I found fuse and diodes and relays burned I replaced them and the microwave work , but when I put time I press start I hear relay start and stop quickly in second , please help

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@alldaymaidcleaningservices1275]

Have you discharged an LG microwave capacitor? The model no is LMV1683ST. It is not easy to reach the terminals plus one side does not have extra or uncover terminal. So I can't find how to short it. Also it is been unplugged for two days, but don't want to take the risk. Any suggestion? Thanks

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 4,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.

[@alexisconsuegra]

Hold on. You always give the same answer. Which is not an answer.

[@dmzsniper]

ApplianceVideo.com Why not just answer the damn question???

[@tumertech4609]

In our country, we check the parts first before replacing them with new ones.

[@mhub3576]

We have a throwaway culture here in the US. We are spoiled zombies who dither while an extremist faction slowly and in plain sight kills democracy.

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@BYTCM]

How do ou test those parts?

[@jal007gaurav]

Hello Guys thanks for your video . I have a question form where i can buy these both parts to replace ?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@davinder757]

Hi, I have this same model microwave (YWMH31017AS). I bought is less than 2 years back and it has started to spark from the top of RHS... It works fine when I use the exhaust fan only. Can I still continue to use the fan till I got it repair and is it repairable.. please advise

[@Appliancevideo]

Great question, with our technicians now getting hundreds questions weekly, they are answering all questions at our website at ApplianceVideo.com under our Repair Help section. We have over 3,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes.

[@adisHI-IQ]

Do you need the same magnetron model?

[@tbmtech5651]

what happens if i install a 2m246 magnetron instead of a 2M226 one?

[@barryburke5782]

My GE Profile Microwave worked for about 5-7 seconds then shut off. Further exam revealed burning/sparking in HV Inverter/Transformer. Digital continuity checked OK for all door switches, primary thermostat, shut off fuse, etc. Replaced Transformer with new part. Everything worked fine except 'No Microwave Heating'. Next, replaced Magnetron and Relay Switch on the circuit board. Everything worked fine except 'No Microwave Heating'. Magnetron humming seems normal! Cleaned mica wave board inside of unit, no sparking here. Can anyone advise what the problem may be. Again, everything worked fine including settings for time, power levels, clock, etc. when started up except 'No Microwave Heating'. Last resort before dropping out to the curb for the landfill! Any ideas greatly appreciated! HELP! Show less Reply

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 13,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@1airgforce1]

Whirlpool microwave oven heating at 60 Hz cycle in the USA but not heating in my country Barbados that is on the 50 Hz cycle. Is there a magnetron & diode for this 50 Hz cycle that can be replace.

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 4,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.

[@UmeSadakichi]

Is it possible to replace diode without unmounting the microwave? Thank you

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

[@Retro327]

Check the fuse on the primary side of the high voltage transformer first.

[@Appliancevideo]

Hello Thanks for the good tip, I hope it can help others with the same issues. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page

[@hnkparts]

You won't get the scrumptious hot dinner if the magnetron of your oven isn't operating properly because it produces the microwave radiation that cooks the food. This is where this practical video comes to our rescue. We provide genuine Whirlpool microwave Magnetron and other Whirlpool microwave parts.

[@kgrewe1]

I have a whirlpool wmh76718as-0 with no heat will this video work for my model?

[@Appliancevideo]

+Mike Grewe Good question, with our technicians now getting hundreds questions weekly, they are answering all questions at our website www.appliancevideo.com/repair-help/ . We also have over 30000 common questions and answers that you can easily search through by your model number, appliance make, problem or error code and it’s absolutely FREE.

[@dansloan4072]

Awesome awesome video! So I have a whirlpool which is not heating...but light, turntable, panel, and clock/timer all function. how do I know if its the magnatron or just maybe the door switch? H E L P!!!!

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 4,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.

[@sellnowbuylater]

Dan Sloan Any luck? The boss (wife) just told me ours isn't heating up. Everything else works.

[@tubejay1]

It's likely either the door switch, Magnetron, or diode. I'm replacing all there on mine and calling it a day. Exact same symptoms.

[@pokydj1]

Quality video

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@davidhill6022]

The diode on my magic chef microwave is bad. It has been discontinued and is unavailable. Are they fairly universal, ie can I use one from a newer but similar model?

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 4,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.

[@theapplianceguy4566]

David Hill CALL your local appliance PARTS dealer and tell them you want the QB MICROWAVE high voltage diode. They should be able to match it up.

[@bluetonight17]

So after my microwave made a very loud grinding noise. it still comes on, but all i hear is that buzzing sound.... I know the Magnetron is still working because I test that by putting in a simple chocolate treat to see if it was heating. and yes it is heating. but its very quite now. like normally you turn on a microwave, you get the buzz, then it like ramps up, or a fan or something comes on, that is not happening. And Ideas?

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 3,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.

[@bluetonight17]

+ApplianceVideo.com I just learned it was still under warranty and whirlpool is sending out a tech to repair it.

[@Appliancevideo]

Great, I hope it works out for you at no charge. Please help usby subscribing to our KZbin channel. Or support our parts department at 1-800-830-5465 and our website www.SaveMoreOnparts.com . This is the only way we can continue to help the over 900,000 people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@thankachanyohannan5159]

👍👍👍👍👍👍👍👍👍

[@maxandmoose]

I have Maytag microwave(same as the whirlpool) that is a year and a half old and the magnetron could possibly be toast already? Unbelievable.

[@delialee3792]

magkano ang synchronous motor whirlpool microwave oven

[@SeanFKennedy]

Why are you replacing the magnetron and the diode and not just the diode?

[@Appliancevideo]

***** All of our technicians are now answering questions daily at our www.appliancevideo.com/ website under the Repair Help section. We also have over 1600 common questions and answers that you can easily search through by your model number, appliance make, problem or error code and it’s absolutely FREE. You also have the option to email a factory service technician with a question on your appliance at www.appliancevideo.com/repair-help/ . If you’re looking for a repair video, you can also search our library of over 2600 free repair videos. ApplianceVideo.com specializes in quality DO-IT-YOURSELF appliance repair videos and we get over 800,000 views per MONTH to our videos worldwide and growing. If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks for your support. Matt Ace Appliance factory service technician.

[@SeanFKennedy]

***** The site did not yield results for my question.

[@Hockey27tom]

The diode usually shorts from the mag arcing or being shorted

[@hadidesire3206]

hello , can you help me about repairing microwave ??

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@smhnguyen]

Hi to Anyone! Mircowave Whirpool GH5184XPS4 After Mircowave oven not heating .I 'm replace Magnatron and check all swich is Ok .But when i inserted into the wall socket out side my kitchen with 1 minus water realy hot. But when I'm inserted into wall socket around in kitchen is no heat even the socket of Mircowave where belong too.Anyone have same problem to share with me!

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 7-days A week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 3,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.

[@mrme5654]

Should have removed your ring while working in that environment. You could easily shock yourself! Otherwise good teaching video.

[@Appliancevideo]

+MrMe Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. We have helped millions of people repair their own appliances so please help us produce more videos to our site by subscribing to our KZbin page, or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.

[@charliedelta9501]

Are you serious!! Complaining for his ring? What about his watch? I guess you weren’t paying attention when he even discharged the capacitors. Pay attention to important issues, because those will make the difference between success or disaster.

[@mikelovetere4719]

Where is the diagnostic part? How do you know to replace the diode?

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at ApplianceVideo.com under our Repair Help section. We have over 3,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and Its free to search through our question & answer library.

[@jodsterjamster8678]

Good chance that it may be overheating so the fuse shuts it down. Probably needs a fan which is in the section near the magnetron to keep it cool.

[@ahsansiddique3705]

???? How u know magnetron and diode faulty ??????? u c dreams Just lost the time

[@EDDIEGARAGE]

how do you test the magnetron

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.

[@Big_Island_Boi]

Thank you for this excellent video that shows exactly why our landfills are full of fairly new, perfectly good appliances... that are so time consuming and expensive to fix that it is literally cheaper to just buy a new one @ $200 to $250 and replace it. There is actually LESS labor and time and work to replace it than to fix it. As usual, a $2 or $5 or $10 part--and shitty design and engineering--costs consumers hundreds of dollars and destroys the planet in the process. Fvck all appliance manufacturers. I still have a stove from the 1940s that works just fine... and a Kenmore washer and dryer from the 1980s that are still functioning properly... but virtually every appliance I've bought in the past 20 to 25 yrs has been replaced and thrown in the landfill. Nothing but "high tech" garbage.

[@MardyObnamia]

are you selling magnatron?

[@frostyan]

is a new dial needed

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.

[@jaimeacevedo7874]

How did you knew the magnetron was bad? You didn't diagnosed.

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

[@MrCoolJaybo1]

Did I miss the diagnosis part? lol

[@kgrewe1]

Also my unit also buzzes when trying to heat

[@Appliancevideo]

+Mike Grewe Good question, with our technicians now getting hundreds questions weekly, they are answering all questions at our website www.appliancevideo.com/repair-help/ . We also have over 30000 common questions and answers that you can easily search through by your model number, appliance make, problem or error code and it’s absolutely FREE.

[@jimmiller6704]

Pretty disappointing. Your title said "Diagnostic." You didn't diagnose it, you replaced it.

[@brentgrover2515]

He never talks about how he diagnosed it. Not heating he says. Well yeah sure but tells us why you chose those parts and not a million other things that could have caused it to not heat!

[@dennisbbb]

This guy replaces the who shebang with no diagnosis of which part is the culprit.

[@jimahscs]

I didn't see any diagnostics at all. Any trained monkey can swap parts.

[@chandraadhikari9916]

Absolutely perfect video. A+! This might be the only video I’ve ever seen where I didn’t have at least one critique for it. No excess talking and everything done using best practices. Well done!