Arai Spoiler DF-X2 Installation Guide

Here is a short video showing you how to install the new Arai Spoiler DF-X2 on to your Arai Corsair-X helmet.
Introducing the new Arai Spoiler DF-X2 for the Corsair-X. The Spoiler DF-X2 was designed and developed in the ultra-competitive environment of MotoGP and is designed to provide increased stability and aerodynamic efficiency for the rider.
The new Arai Spoiler DF-X2 is not integral to the shell and is designed to crush or detach easily when subjected to forces beyond normal use. This allows the Corsair-X equipped with the Spoiler DF-X2 to provide maximum stability at speed without compromising the round, smooth and strong shell needed to manage impact energy and maximize the helmet’s glancing off ability.
For those street riders who like the look of the DF-X2, you’ll be glad to hear that initial feedback from test riders on the street suggests improved stability in turbulent air (like when passing a truck) as well as reduced buffeting at the upper limits of legal street speeds. Your results may vary, but it’s good to know there are some benefits on the street beyond just looking fast.
The Arai Spoiler DF-X2 will be available from your favorite Arai dealer in late September with an MSRP of $50.85.
#Arai #AraiHelmet #Corsair #PED #MotoGP

[@IN_ZANE_]

When is Arai going to make a self tinting visor available? Only reason I haven't bought an Arai yet Keep waiting but seems like it's never going to happen

[@ayowser01]

I agree. I decided to pull the trigger on one of the Chinese aftermarket ones. I'll update as to whether it's any good.

[@IN_ZANE_]

@@ayowser01 But is there a reason they don't bring out? I mean at this stage it almost seems deliberate

[@ayowser01]

@E_Honda if I had to guess, Arai wasn't able to make a deal to their liking with the Transitions brand, or Transitions [the brand] probably have some exclusionary agreement with Shoei.

[@ayowser01]

@E_Honda I received the aftermarket transitions/photochromstic lens; don't do it. It's trash. The fitment is shit and the air vents, as well as the pin guide rattle. It even states on the shield that there's no guarantee that it won't shatter in an accident. 100% returning it.

[@IN_ZANE_]

@@ayowser01 Yeah I wouldn't expect it to be great, just with Arai would make one, need a new helmet soon and would like to stay with Arai but they don't make it easy

[@markcontreras4035]

My rear spoiler is stuck on the high position what do I do ?

[@jonathanalvarezbrana9939]

i know it is valid for model v but it is valid for gp🙏

[@KJcinemas]

How strong is the adhesive? Feel like it'd give out after a while

[@lkp947]

Does it fit with arai ram4?

[@_nikk0]

I wish I had a Corsair x helmet 😔

[@raizenopu1255]

Is that spoiler in the box? Or shall I buy separately?

[@AraiHelmetAmericas]

It needs to be purchased seperatly

[@renerasch334]

Hopefuly sometime in clear :)

[@AraiHelmetAmericas]

The DF-X2 is now available in clear on our website araiamericas.com in the parts and accessories section.

[@thismanuelhung]

Is it necessary to clean a brand new helmet before installing the spoiler?

[@AraiHelmetAmericas]

It is best practice, just in case there is anything on the shell

[@thismanuelhung]

@@AraiHelmetAmericas is it possible to remove the spoiler if at some point I wanted to put a different color spoiler on?

[@AraiHelmetAmericas]

@@thismanuelhung Yes, the spoiler is held to the shell of the helmet with clear double-sided tape.

[@thismanuelhung]

@@AraiHelmetAmericas just using a heat gun?

[@AraiHelmetAmericas]

@@thismanuelhung No heat guns, they are too hot and can melt things. Just a blow dryer on low heat.

[@user-wo9lt6kr4m]

My name is Arai

[@mauricemotoman3305]

So how do you open the rear vents? I got an arai rx7v

[@AraiHelmetAmericas]

The vents are still optional, it is just a bit more of a stretch to get your finger inside.

[@ayowser01]

Chopsticks

[@lalmuansanga1759]

What is the weight of spoiler?

[@AraiHelmetAmericas]

It is about 10 grams

[@kenbowen3245]

Doe it fit the Corsair V??

[@AraiHelmetAmericas]

Ken, it will not fit on the Corsair-V as the diffuser placement is different. The DF-X2 only works for the Corsair-X

[@kennyvloggins5358]

@@AraiHelmetAmericas is there a version available that will fit the V model?

[@AraiHelmetAmericas]

@@kennyvloggins5358 I am sorry but there is not a DF-X2 for the Corsair-V

[@verdeboyo]

WHY YOU BOTHERING SHOWING THIS COS WE HAVE NONE IN UK. I've just bought my RX7V and want the spoiler as soon as possible

[@AraiHelmetAmericas]

Hi Gio, This KZbin page is maintained for the North and South American markets. You would be best-served contacting your local distributor, which for the UK can be reached at whyarai.co.uk

[@xcg1234]

Did you see the channel name? Arai"AMERICAS".

[@verdeboyo]

@@AraiHelmetAmericas I'm not angry because I now have one, ordered from Japan.

[@Diego-be8un]

Does it fit on a Rx7 gp ?