ARC and CEC for less than $140?? Arylic B50 Amp Review!

[@creville9331]

Great job

[@jaysonaclan6085]

Can I plug my soundcraft 8fx mixer here for my main out?

[@Jeremy_810]

I have no experience with these little class D amps but this Arylic B50 has me curious. I have some Cerwin Vega RE30 12" speakers I bought back in the 90's. They're 4 ohm 250 watt but I used to drive them with a cheap Pioneer 200 watt 8 ohm stereo receiver I bought at the same time to wall rattling decibel levels. The Cerwin Vegas are a legit 97db sensitivity, if not more. It would be hilarious if this little Arylic could drive those speakers. What do you think?

[@TheFrugalAudiophile]

I am pretty sure it will, especially if they are 97Db at 1W 1M. Could be a cool way to modernize some older speakers!

[@ccorreia77]

can i connect to tv by hdmi + the 2x Polk T50 speakers i have, and increase a LOT the sound of the tv, and ear some music with bluetooth connection with "good" quality ?

[@TheFrugalAudiophile]

Oh yes, that would definitely be better than most TV speakers! That would be a perfect setup for this amp!

[@percyondatube]

I am really looking to get this amp. It would be an improvement for an audiophile newbie. 👌🏽 I don't have a lot of desktop space to work with as well. 🤔 💰

[@TheFrugalAudiophile]

It would work just fine on a desktop, but I would probably look elsewhere as there are better options. Check out some of the small amps with built in DACs from Fosi Audio and Aiyima. The Aiyima A07 pro would be a great desktop amp! Not sure if it has DAC tho. I tested the DO3 and I really liked it and it does have a built-in DAC.

[@moto-rambler]

I might be wrong but I think the app features a high pass filter.

[@TheFrugalAudiophile]

That is a good question! I know it does have EQ, but that is different than a high- pass filter.

[@TheFrugalAudiophile]

Finally checked out the phone app and there a crossover setting in it! Releasing. video on this next Tuesday.

[@josephsaucedo8691]

You probably need to up grade the firm wear the first model have old firm wear it should work after it's upgraded.🎶🎵💯✌️

[@TheFrugalAudiophile]

I did and it does!

[@josephsaucedo8691]

@@TheFrugalAudiophile cool glad to hear that 😉💯🎶✌️

[@TheFrugalAudiophile]

@@josephsaucedo8691 Yes, I was glad to see that it fixed the issue. All in all, it's a great inexpensive, ARC amp solution!

[@josephsaucedo8691]

@@TheFrugalAudiophile good to no. the only thing that I wish arylic would do to there completed units is offer there full capibility for there board to the out side of the unit and also offer a way to design a case for there dyi boards. I messaged and suggested to them a while back and they actually came really close to it with this model there was only a few options that were left out if comparing it to the options that are offered on the dyi boards. I think they sell them self's a little short by not applying all the functions to the out side of there completed units in my opinion. Still a very good product 💯🛠️👍✌️🍻