Pouring slabs and picking scabs. Round for the crew: / ave
Пікірлер: 1 400
@AW-Services3 жыл бұрын
You need one of those fancy skid steer concrete mixer bucket things that Andrew Camarata uses
@arduinoversusevil20253 жыл бұрын
SIX THOUSAND DOLL HAIRS?! I got it done with yard scrap and 4 beers.
@AW-Services3 жыл бұрын
@@arduinoversusevil2025 Prefer the Uncle bumblefuck creation
@timothyvanderschultzen96403 жыл бұрын
@@DaffyDuc69 - Maybe they were double deuces?
@lacombar3 жыл бұрын
@@arduinoversusevil2025 that's US doll pubic hairs, that must be >10k Canadian pesos...
@THEOGGUNSHOW3 жыл бұрын
🤪👍👍👍
@eugenekrabs42533 жыл бұрын
Been laying concrete since I was born. Word of advice, no matter how good the concrete looks, don't eat it.
@Gr3nadgr3gory3 жыл бұрын
So that's what I did wrong.
@ApolloTheDerg3 жыл бұрын
One of my personal struggles right here
@wes11bravo3 жыл бұрын
Now you tell me.
@petewood23503 жыл бұрын
So Dr is that why I have Constipation?.
@timesthree57573 жыл бұрын
But it taste good.
@jasonhessels3 жыл бұрын
Why the beating of us farm welders. Never ever have we ever had a weld let go. Ever.... it’s usually the slag that fails.
@NoPegs3 жыл бұрын
Or the terminals on one of the seven various automotive batteries you chained in series with box-wrenches for a repair in the field when you're about halfway down your second rod? Because gasoline/diesel welders ain't cheap, right?
@subixbarbarasson60523 жыл бұрын
Well said
@thedevilinthecircuit14143 жыл бұрын
And they said the Red Green Show was no longer on TV. "That's why God made hoses." EVERYTHING is a fuse is you use it wrong enough.
@tbled523 жыл бұрын
obviously Canada has had a thriving DIY industry for decades
@EyebrowsMahoney3 жыл бұрын
Every machine is a smoke machine if you operate it wrong enough.
@notmarhellnem84143 жыл бұрын
This contraption makes all my noodly appendages retract when it moves.
@andreasbachlindsmann16103 жыл бұрын
Hell, I even sucked my hemorrhoids back in.
@351cleavland3 жыл бұрын
@@andreasbachlindsmann1610 As long as it was your own and not others'.
@RoseUnseen3 жыл бұрын
when dumping a bag of concrete you want to get half of it in the air so it coats your teeth and eyes lol
@arduinoversusevil20253 жыл бұрын
#Protips
@timothyvanderschultzen96403 жыл бұрын
See-mint boogers rule!
@MattGamesYT3 жыл бұрын
@@arduinoversusevil2025 Same applies for screed, woodchip, chicken food and metal grinding dust!
@TheNapalmFTW3 жыл бұрын
What's a little bit of silicosis between friends eh
@samjezard3 жыл бұрын
nature's hair product - gives you that "fresh from the breech" look if you still got some, half-assed hardhat if you're rocking a chrome dome
@tonyp66313 жыл бұрын
No need for rebar when you have crescent wrenches in your aggregate
@Richter-893 жыл бұрын
Good thing you checked the fitment of the shaft before gettin' out there in the field. That coulda been a pain in the ass.
@okbanlon3 жыл бұрын
My sincere congratulations - that is, without a doubt, the most half-assed cement mixer I have ever seen. Bonus points for the whole rig being self contained and self propelled, so that you can drive around and mix a load of sketchy cement anywhere on the property.
@jersmont13093 жыл бұрын
You could drive all over the area and just dump cement at night
@halnywiatr3 жыл бұрын
How to lay concrete: Start with complimenting it, and then buy it a few drinks ...
@noisytim3 жыл бұрын
Mine’s still playing HARD to get :/
@paddington16703 жыл бұрын
you place concrete, you lay pipe
@poptartmcjelly70543 жыл бұрын
But in the end it's all wet, sticky and gets everywhere.
@pentachronic3 жыл бұрын
You give it a few drinks and it starts getting hot and then goes cold and rigid!
@cholesterol67033 жыл бұрын
Usually I spill my liquid additives before I even get to the mix bucket.
@AshTheDeerGuy3 жыл бұрын
It's like an expensive automagic dull apprentice! Hardly works, so you can work harder
@hyperboloidofonesheet10363 жыл бұрын
At least he's shown he has the skills to weld a patch on the side of that snow bucket when old man winter comes round again.
@hyperboloidofonesheet10363 жыл бұрын
@@Dherkin_McGhurken I bow down to your superior technical enginerding!
@somedude51743 жыл бұрын
@@Dherkin_McGhurken lmfao
@papapetad3 жыл бұрын
You're right. Your viewership has not been forthcoming about acknowledging its gratitude for your adjusting volume levels during grinding exercises. Thank you. It truly has been agreeable and appreciated. A true gentleman in mechanic's sheathing.
@leroyreaper_lv17493 жыл бұрын
Skip engineering and go straight to fabrication for best results 👍👍🤘
@MattLitkeRacing3 жыл бұрын
I think you’re violating the Deere John EULA by doing this. That’s why we like you!
@temptorsent3 жыл бұрын
Forget the EULA, he's violating that Deere! Carry on...
@smartgorilla3 жыл бұрын
Probably got big man cuts from the deeere apple centric right to not adjust your own crap
@BobPapadopoulos3 жыл бұрын
I know some of the fellas what wrote that, and they're not the sort you'd invite over for dinner parties because you don't wanna listen to em.
@tomtheplummer73223 жыл бұрын
Right to disrepair
@theRPGmaster3 жыл бұрын
@@tomtheplummer7322 What do they say over in the US of A, our right to despair shall not be infringed?
@MotoDeSoto3 жыл бұрын
Orange is my wrench color. You’ll need to find a different color.
@Swampyankeehomestead3 жыл бұрын
Paint them pink, not too many people will steal pink tools but, the ones that do will gladly give there tool.
@Boraxo3 жыл бұрын
Back when I was a young teen my Dad asked me what was my least favorite color. "Purple" I told him. 2 days later every tool handle in the shop was purple. Every single one.
@Demicron3 жыл бұрын
What do u take him for a Jimmy diresta?
@rufusconnolly84893 жыл бұрын
@@Boraxo I would kill to have your dad. I inherited some tools and had to paint them myself lol
@apersonontheinternet80063 жыл бұрын
@@Swampyankeehomestead telling people my secrets! To the gulag
@KiwiRanger13 жыл бұрын
12:00 how many of us were anticipating the auger giving the hose a good chomp?
@Joshdavies1463 жыл бұрын
2:53 Wait, your grinder has a volume knob?
@mkultra45423 жыл бұрын
Calibrated in cm³ . . . . to remove the correct amount of material....then apply paint.
@harveysmith1003 жыл бұрын
I never doubted it would work for a minute. ( I doubted it for the first 15 minutes!!)
@HowNotToDoEverything3 жыл бұрын
"sweatin', cursin', groanin' and gaggin' on my hands and knees..." Brother, something tells me it's not your first time.
@samuelmartin28173 жыл бұрын
DOING CONCRETE???
@stewsafreak3 жыл бұрын
That’s how tradespeople get promoted
@xmachine70033 жыл бұрын
Deliverance😉
@blubb77113 жыл бұрын
Canada man is the more friendly and inteligent cousin of florida man.
@iFixJunk3 жыл бұрын
Ah, but which one is crazier? I used to believe that I knew.
@Gr3nadgr3gory3 жыл бұрын
@@iFixJunk ask Ricky, Bubbles and Jules.
@NotSureJoeBauers3 жыл бұрын
Less meth more weed
@cafe0letriumph3 жыл бұрын
Ave: Alexa, order 6 one arm shirts. Alexa: I'm sorry aavvvee, which arm? Ave: dealers choice. Alexa: .... beep boop.
@rianmach90433 жыл бұрын
Just flip the shirt around if Lady Luck is not on your side
@MolsonPeanut3 жыл бұрын
Lol not gunna lie, I was waiting for that to snap right off under the weight of the mix.
@TheAndre89003 жыл бұрын
The perfect setting for a farmer weld is every knob turned to 11/10 of the scale and be sure to weld standing in the muddiest shittiest puddle of manure ever seen.
@TheAndre89003 жыл бұрын
@@miket6314 You mean socksless flip-flops right?
@unherolike3 жыл бұрын
"Check the fitment of the shaft" Ladies and Gentleman..... That is what the book learning types call Foreshadowing.
@alexs63523 жыл бұрын
I can feel my civil engineer friends cringing at the eyeballing of this concrete mix
@nybirdman3 жыл бұрын
Yea that mix only gets approved in the chinesium cities.
@PeterB123453 жыл бұрын
A wee bit on the leaky side, eh? Glad I'm not the only one who thought so...
@MrPWH123453 жыл бұрын
"Check the fitment of the shaft before you get out in the field!" , you're killing me Smalls!
@tekvax013 жыл бұрын
"Cling tenaciously to my false bravado it never fails!" -- AvE
@robsodomy3 жыл бұрын
When she started spinning I couldn't stop laughing.
@xmachine70033 жыл бұрын
Slappin the tools around the bucket😂😂
@gyroo423 жыл бұрын
Rent a concrete mixer for a day? Ave: hold my bike...
@scriptguru46693 жыл бұрын
most cost effective way to mix concrete - A meathead with a shovel, it's been that way for a few thousand years.
@papapetad3 жыл бұрын
Meathead lubricant prices are not what they used to be.
@ukpkmkk_23 жыл бұрын
I also wondered.. it’s a one time thing and not that big amount.. one could do it himself and it would be more cost effective and easy to do..
@mikesavage87933 жыл бұрын
@@papapetad Case of beer ain't that much.
@kennethshorter75463 жыл бұрын
But they got "no stoke"
@TreyCook213 жыл бұрын
I read methhead, pretty sure that's what you're referring to anyway, also sure they'd do it faster with a spoon.
@ghl34883 жыл бұрын
Proof of concept right before your very eyes. I'll bet that before the turn of the century that will catch on and there will be large trucks with those things on the back taking that concrete stuff right to the job.
@PatrickPease3 жыл бұрын
i really feel like a guest when a man tells his wife to say hello to me.
@sarumayne3 жыл бұрын
"I've got the clearance to run the interference" I too sometimes Rage Against the Machine
@peterhutnick32913 жыл бұрын
That’s a cover. Originally by Cypress Hill.
@JerryMraz.3 жыл бұрын
B Real
@tychlg3 жыл бұрын
@@peterhutnick3291 pulled that up in a separate tab and replayed this vid on mute, satisfying.
@sarumayne3 жыл бұрын
Dang, I always forget RATM did a cover album, never took the time to learn who did what. Time for some research
@rufusconnolly84893 жыл бұрын
Since y'all are finding out about good songs that were popularly covered, check out Drift Away by Dobie Grey. Cracker did it solid in the 90s, but the original is.. Well, I like it better, but my pic is a Bebop/Calvin&Hobbes crossover so temper your expectations accordingly lol
@cloroxfreshmeadowbleach98603 жыл бұрын
finallly an AVE upload been having withdraws
@smartgorilla3 жыл бұрын
Same here. I need 30 mins of Friday fun
@TheNapalmFTW3 жыл бұрын
You should never withdraw. But it's only to have withdrawals
@alabrrmrbmmr3 жыл бұрын
Simply one of the most entertaining people on KZbin. It's like I'm a kid watching Red Green all over again.
@LazerLord103 жыл бұрын
Oh hey, that old part is from that screw press, isn't it? I'd recognize that I-can't-believe-it's-not-beige paint anywhere.
@x9x9x9x9x93 жыл бұрын
It feels like tis been forever since we had a full video. Glad you're back! I would love to see an exploration video again soon either here or on chickadee or even a simple teardown of something weird like the old days but hey any content im happy.
@RecalcitrantObserver3 жыл бұрын
That looks like the farmers concrete my grandfather use to mix up! About 5 mpa after 28 days lol
@arduinoversusevil20253 жыл бұрын
Ants need homes too.
@RecalcitrantObserver3 жыл бұрын
@@arduinoversusevil2025 Not 1 homeless ant around our farm lol
@RamadaArtist3 жыл бұрын
The *best* kind of mentors: "Here's some advice that I've got for you that I'm not gonna use, and then you an' me, we're gonna fix my fuckup because I didn't do what I said we should do, and in the future, you'll always remember."
@mdn13mdn3 жыл бұрын
Well, I'm convinced. I'll order the ready mix.
@BobPapadopoulos3 жыл бұрын
There's only two ways of accomplishing anything: trial and error, or theoretical pre-testing. The former is seen as dumber, but the latter is no fun when you're drinking and let's be honest: that's what's important.
@ironash203 жыл бұрын
I think traditional mixers use kneading. The inside fins pull the crete up then drop it at the top where it kneads down and then repeats. I think this side mixing idea might not work well since it leaves areas where crete can hide and not mix. I think a better solution would be to just mount a mixing bucket in the deere bucket and spin it.
@Wingnut353 Жыл бұрын
Or weld an an attachment plate to a mixer.... and just attach it to the tractor....
@kevinblank55853 жыл бұрын
I’ve never seen someone work so hard to make a mess.
@JonahAberle3 жыл бұрын
I've been thanking you for years for turning down the volume on your tools. I owe ya a beer for that alone. Fellas in the comments were telling me that was some automatic magic but I was not swayed, not me!
@tylerd.94573 жыл бұрын
Farm-grade welding setup. Sounds like a tetanus shot waiting to happen. Haha
@BernardTheMandeville3 жыл бұрын
I recently found a note in my phone saying 'get tetanus shot' from 2019. I can't remember ever getting one though
@johnt18153 жыл бұрын
This is it gentlemen , I think he finally lost what little he had left. We're entering a new erra of anxiety inducing entertainment with proportionally prominent pucker factor. Better double up on the safety squints.
@fidikvien76823 жыл бұрын
I don't know why but the "hello tractor" gets me every time. Nobody questions when I say it out loud anytime I start a tractor now either...
@infoanorexic3 жыл бұрын
In a pinch, you can lay your pre-mix in the forms dry. Wet it, screed, finish. Poke around it, here and there, to make sure you got it all wet. I ended up doing that when the mixer broke right after getting started. Put it down in two layers to make sure I didn't leave any dry spots, bottom a little wet, top slightly "stiff." It worked. Can't find any difference between the first section I did and the one I mixed in the forms Read about this in an Ag Shop textbook. Amazing how something you read (mainly out of boredom) in high school can come to your rescue nearly 40 years later.
@mckenziekeith74343 жыл бұрын
I have wondered if this would work. Seems like as long as you mind how much water you put in and make sure the contents of the bag don't separate it should work pretty well. Especially if you are only making a footpath or driveway on top of solid base.
@SkivaksXD3 жыл бұрын
"Check fitment of the shaft" - proceeds with out checking - shaft doesnt fit in the field - we breathe on his collar while he tries to save the shituation Outcome: do what he says, dont do what he does
@coldcupofjoe69633 жыл бұрын
I work with a guy that is best described as 'gives good advice, doesn't follow it' knows more about fire alarms than all of the bosses in the office though.
@280zone3 жыл бұрын
I am glad to have roundy spinny trucks that will deliver that kinda slop right to the kingdom.
@snoopdogie1873 жыл бұрын
Usually cheaper than buying the dry ingredients also. If you need a large amount, it makes no sense to mix it on your own.
@buckstarchaser23763 жыл бұрын
Thanks for crushing my idea for a 24/7 Grinder Livestream in Dolby Digital Surround and IMAX.
@dhawthorne16343 жыл бұрын
"Always knock the slag off your noozle" Words of wisdom from a man who has obviously gone out the back door and right around to the front many a time.
@starcarrier18743 жыл бұрын
Wow, babydoll on camera, in the drawers! This channel may be gettin a little racey for me.
@gs4253 жыл бұрын
Nice flanks too
@Nos21133 жыл бұрын
Non-destructive testing: when you whack it real good and it don't come off on ya
@aaronc26243 жыл бұрын
Do i lay concrete? No. Am i a fabricator ? No. Am i an engineer? No. Do i binge watch this channel for some random knowledge, wholesome family content and world champion level banter? Hell yeah!
@mattedward61553 жыл бұрын
Keep running towards that light man, you have been one of my biggest inspirations. Can't begin to tell you how blessed we all are to share in your knowledge, and uhh atypical adventures. God bless you and if I ever head up to Canadia I hope to meet you.
@cavemaneca3 жыл бұрын
Don't get me wrong, it's a good idea. Good ideas just often aren't all that practical.
@stevej68243 жыл бұрын
And practical ideas aren’t always that good
@williamdegnan47183 жыл бұрын
15:29 Looks like about a ten inch slump -- roughly equivalent to a Type 6 on the Bristol Stool Scale.
@Gameboygenius3 жыл бұрын
@@paulg3336 Who isn't aware of the Bristol Stool Scale in this neck of the woods? We're all shitposters in this here comment section.
@williamdegnan47183 жыл бұрын
@@paulg3336 It should come as no surprise that many here have higher levels of subject matter competency in a variety of fields and across disciplines. See y'all at AvE Fantasy Camp '22!
@7h3F33d3r3 жыл бұрын
@@Gameboygenius That would be me. So now I have a conudrum...is I or ain't I a shitposter? Was hoping to get some good sleep tonight but now I don't even know what I am!
@CorruptedPlist3 жыл бұрын
Oh man, as a farmer, I can call myself a professional at shaking whatever’s in the goddamn bucket of a tractor.
@rufusconnolly84893 жыл бұрын
We still need men like you. Whatever the politicians say.
@OvAeons3 жыл бұрын
Man that wrench in there got rocked HARD and put away wet!
@rman1263 жыл бұрын
Anything to avoid going to the homedepot or local tool rental and rent a proper mixer
@zlaya843 жыл бұрын
RENT!? thats just giving money away!
@Skyliner04s3 жыл бұрын
Not gonna lie, I missed you, uncle bumblefuck! Glad you´re well!
@Crobisaur3 жыл бұрын
I'm impressed it worked as well as intended! Took that patina right off the auger too! Free glamour shot for the ol influencer gram.
@Schrasma3 жыл бұрын
Hey ave i have Been watching your videos for very Long Time now... but Working at a concrete factory you can do yourself a favor fairly easy if you change the srew conveyer (which just conveys and does NOT correctly mix) against a Spikes Roller... you can easily build one yourself with a big Long and lots of small short pipes and a welder and the results will be extremly good :) greetings from a german concrete Factory :P if you have questions or Need dwg or dxf Comment :) keep your showel out of the mixer ;)
@OfficialNakatsuMegami3 жыл бұрын
This is, what I think is one of your best videos. I loved it. Especially the repeats of what you said earlier in the video.
@Adamsadventures833 жыл бұрын
I give this a provisional Red Green seal of approval. It would have gotten a full approval but there ain't a single bit of duct tape to be seen. I about lost it with the tiny tractor Timmy bit. I had to stop watching his channel after a dozen videos or so. Still better than the old Wankerstar though...
@AU5199405453 жыл бұрын
@2:30 "If'n you remember this part, it's time you move on to greener pastures, partner." Brother, that video was the one that subscribed me to your channel. What with the Swedish nut lathe, wife holding in your hernia, and sitting at the cool kid's table for doing it one handed while filming with the other....my that doesn't sound good a' tall! Loved the callback.
@imbabyface3 жыл бұрын
Not too shabby an idea! The Vo-cab is always a entertainment and chuckles. Thx Brother!
@globeflicker92163 жыл бұрын
Rube Goldberg just called his patent attorney. 🤔🙂
@cangooner3 жыл бұрын
"I sure do like him but he's hard on equipment..." No idea why that popped into my head just now. :)
@stanervin61083 жыл бұрын
What's wrong with AvE's hard on equipment?
@jaredmarker54323 жыл бұрын
Well it's vise grips for pliers, and pliers for a wrench A wrench for a hammer, hammers everything else
@roygrinberg87953 жыл бұрын
I showed my wife this video.... long story short... I need to buy her a tractor. THANKS A LOT Ave!! 😁
@jaylittleton13 жыл бұрын
Wife said it reminded her of our wedding week. Twisting, turning, flopping and sloppy with a whole lot of noise. I'm a lucky man.
@timfagan8163 жыл бұрын
Your wife sounds like she needs to be my wife!
@TheOlsonOutfit3 жыл бұрын
I spy with my little eye: An angry pixie powered Husqvarna. BOLTR???
@deadfishporter3 жыл бұрын
I have one and it's fantastic! Plenty of power and enough run time to get most jobs done 👍
@Finite-Tuning3 жыл бұрын
Harbor Freight cement mixers only cost about $200.00 just in case ya change your mind. Cheers 🍻.
@BudMasta3 жыл бұрын
Does it work past 90 days though?
@Finite-Tuning3 жыл бұрын
@@BudMasta: Yes, but if you only need it for a weekend job then does it matter? Motors are cheap on ebay and easy to replace should the need arise. Two mixers and a hand full of friends are still way cheaper than getting a truck to deliver, depending of coarse on the size of the job and quantity of beer! Cheers 🍻.
@ronniejohnson3173 жыл бұрын
How about using a Hazard Fraud 6” auger? That way it won’t have the cabbage head disease. Stalk not big enough to hold up the head.
@douglasarnold42483 жыл бұрын
Whew'who! Certified farm welder merit badge! 😎 🆒️
@berthuggins80423 жыл бұрын
The sketch factor is strong with this one! Be sure to have your apprentice wear long sleeves when he reaches in to guide the chunkys into the spinamakthung. Power take off yer arm!
@zachary37773 жыл бұрын
I like TTWT, but the last part cracked me up,
@summitlt3 жыл бұрын
Looks like it needs some more protoabrication. Mint idea though, no fun moving around a cement mixer.
@wtfshiiiiii3 жыл бұрын
“Grass is always greener over the septic tanks” - AvE Truer words have never been spoken.
@infoanorexic3 жыл бұрын
actually, that was/is a title to a book by erma bombeck, and I'd heard the phrase before then. it's been around forever. probably evolved from "over the last sh!thouse hole," in the days before indoor plumbing
@Bobs-Wrigles55553 жыл бұрын
That's gotta be one of most forked up, screwed up, bucket of a job I've seen in a long time
@JacoBadenhorst3 жыл бұрын
I will be sitting here with my grinder-dust flavoured popcorn waiting for the structural engineer to ramble something about water/cement ratio....
@noisytim3 жыл бұрын
Want some gritty beer? 😆
@mattfleming863 жыл бұрын
The wetter the better. Self leveling.
@bryanjk3 жыл бұрын
Would a bearing on the opposite motor side help this? Honestly it seems like this could be refined as a bucket attachment and be useful. Idk though
@arduinoversusevil20253 жыл бұрын
Tail whip really ups the jank tho.
@BobPapadopoulos3 жыл бұрын
@@arduinoversusevil2025 Nother shaft from the other end and a bearing on that side too.
@INORBET3 жыл бұрын
There’s already a bucket attachment that does this exact thing with a retractable openable whole on the bottom to let out the mixture, check out Andrew Camarata’s channel 👌🏼
@wirebrush3 жыл бұрын
Those ribbon augers are a disaster waiting to happen when they're constrained and supported. You'd be better off to weld some paddles onto a shaft and have it supported on the other end.
@tylerdurden47703 жыл бұрын
AvE Use an offset. The end can rotate in a larger arc then the motor.
@MrGuvEuroman3 жыл бұрын
I keep hearing the “shake hards with danger” guitar riff every time I watch your videos.
@Kavukamari3 жыл бұрын
i love what AvE's done with the english language, very nice remodel
@Guysm1l3y3 жыл бұрын
It's all fun and games until you price out hydraulic motors!
@rufusconnolly84893 жыл бұрын
I feel like most people don't understand AvE properly. I don't either but I know that he's like LTT a little in that way, it's not about practicality. Not always. Sometimes it's just for the lols along the way.
@tomwilliams86753 жыл бұрын
And this is the last time we saw AvE with two arms 😲💀💀💀
@imafarmboy23 жыл бұрын
You don't know what will work until you find out what won't work. A+ for effort.
@reidkirkpatrick9973 жыл бұрын
So glad you’re around helping balance out the demons in my head!
@waynegoebel3953 жыл бұрын
Thank you for self-regulating the volume for all these years!! 😂
@drivenbydemons65373 жыл бұрын
A couple more screws, some pvc pipe and the beautiful scent of glue, a little fire hose, and you have a concrete PUMPER.
@tccoggs3 жыл бұрын
I was waiting for the pillow block and secondary bearing on the other end of the screw, but then I remembered which channel I was watching.
@yeahitskimmel3 жыл бұрын
The adjustable wrench getting beat up by the auger was unreasonably funny
@makesense16073 жыл бұрын
6:46 I think i'm in love. Look at that pile of batterias charging up nice and smooth.
@patobez39013 жыл бұрын
Yep, them are some sweet batteries! You are a lucky man Mister 😜
@ChrisDoll443 жыл бұрын
There are better ways of accomplishing this but by golly if that's what we were after.... wait, what are we after again?
@jamesfair97513 жыл бұрын
Damn the misses looking thicker than a snicker nice catch uncle.
@NoPegs3 жыл бұрын
Well, guess we all need to get to pouring one, now... What with spring stirring your sap vigorously enough this year to achieve meringue... You were clearly foaming vigorously from un-specified orifice(s) as you went about composing your 2021 Magnum Opus, and it's barely June! You hit the top of that bell curve, your proverbial oven is cooling down now, the days of settling for half-baked at best are upon ye! Here's to watching the next 7 months of your 2021 ideas that will, inevitably, require adding additional entries to the "shade-tree project midwife's guide to complications of birth" handbook... Cheers!
@K11Kids3 жыл бұрын
Time to go do this to the old 86 kubota. But with the drag line bucket. Use the rear pto. I can make it work I think
@maudlg32003 жыл бұрын
When loading a concrete mixer always start with water/additives before adding your agregates. Else you'll have a big clump of solid dirt that won't mix with the water and you will have to shovel it out. But then again, I've never used a hydraulic cement mixer... Only puny 1/2hp ones.
@TimAnder113 жыл бұрын
You are almost there. A machine similar to what you have created has been used for years in the plaster and stucco world. There is always a support on the far end that holds the screw at the bottom of the trough to achieve complete mixing. Make sure and leave enough room for the largest rocks you will be mixing so they don't cause the screw to bind.
@kswis2 жыл бұрын
Bout fell over laughing when you first turnt it on. Flapping all over the bucket like a hard wet noodle smacking tools ect. Absolutely hilarious, well done. I witnessed a lot less shoveling which always makes it worth it