Are these the coolest turbo charge pipes for the Mercedes C250?

In this video, I show you how to remove the OEM flimsy, rubber turbo charge pipes from my Mercedes c250 turbo 4 cylinder engine and replace it with the higher quality, better looking turbo charge pipes from Tornado Tuning.
DISCLAIMER: This video was sponsored by Tornado Tuning. All views and opinions expressed in this video are of my own.
Contact:
NARESH VIRKAR
WhatsApp: [phone] (preferred contact method)
Email: [e-mail]
Facebook:TornadoTuningInternational
KZbin Music
The Brothers Record - "Palmtrees"
DISCLAIMER: This video is NOT endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of FlexxAlexander, I cannot guarantee against improper use or unauthorized modifications of this information. FlexxAlexander assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FlexxAlexander recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FlexxAlexander, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FlexxAlexander.

[@keoni37]

Great, thanks for the video. Shop wanted $1,380 for the job (passenger side only)! I'll do it myself for the price of the right side pipe, left side (driver side) already done.

[@TheFlexxGarage]

Can’t hurt to do it yourself. Just gotta make sure everything is on well.

[@jnmendez]

Flexx I have been following you for a while and finally installed the hoses you feature in this video to my 2013 C250. I also recently installed the TT aluminum intake pipe and also the blowoff diverter valve. They are really making a difference in performance. My question in this video you recommend using 2 clamps however I was only able to use one clamp because two clamps didn't seem to fit. My question are 2 clamps really necessary? Also is there a better quality clamps that you recommend? I like the factory style clamps for their ease of install of and removal also their secure attachment. I would really appreciate your response. Thanks,

[@TheFlexxGarage]

Doesn’t matter what you use as long as it holds on tight.

[@redfireats1421]

flexx...i have a question. what do you think in a turbo upgrade for the c250 coupe 1.8.... what is your advise on that? wht is the c250 factory turbo and what what would you do to upgrade it or wont upgrade it? awaits your comments on same thx Derek

[@TheFlexxGarage]

FOLLOW ME!!! Website: www.FlexxAlexander.com Facebook: facebook.com/FlexxAlexander1 Instagram: instagram.com/Flexx_Alexander

[@6side476]

Where’s the grill and carbon splitter from? I can’t find any cosmetic parts for mine that don’t look cheaply made

[@freemindas]

Does it influence car acceleration if this pipe is damaged ?

[@cuddah]

What's up Flexx just ordered the intake charge pipe, intercooler pipes, and turbo delete. Hopefully intercooler pipes fits my Rado intercooler. I have someone that is going to upgrade my turbo. Just don't know who upgrades transmissions. Do you have anyone that upgrades transmissions?

[@daguallo100]

Andy Orellana where did you find them

[@peacesoundsstuff]

Tune

[@ironeast3883]

Is this for the 220, or only the 250??

[@benjaminrivera1566]

Hi Flexx, is there any discount with Tornando Tunning by mentioning your name? I'm interested in the Aluminum Intake Pipe & Intercooler Pipe.

[@TheFlexxGarage]

Probably. You gotta do it and try.

[@doriansmith1290]

Hey , Flexx Do these Pipes connect to the oem intercooler?

[@TheFlexxGarage]

That’s a good question…I honestly don’t know. You can ask Tornado tuning. They might know.

[@latchmangoberdhan9813]

is this pipe fit my car Mercedes Benz C250 4matic 2011.

[@acarian8060]

Hi, I have a 2009 w204 classic. Is it possible to replace the steering wheel and the speedometer (with screen) for that of the avantgarde?

[@user-seEtinHtltl]

I have a 2013 x204 impossible

[@Madeasy4you]

Thanks, btw Flexx please save me on this i cleared code p0068 and replaced map sensor drove the car code came back up, can the air sensor be the cause?

[@TheFlexxGarage]

Nobody can truly figure out that issue. I tried a million things and it just went away on its own over time. I checked for leaks, changed my sensors, cleaned my throttle body, changed my air filter, I changed my spark plugs, I changed my coil plugs, and nothing was 100% the fix. I’m starting to think maybe it’s a software issue and the ECU needs an update. 🤷🏻‍♂️

[@Madeasy4you]

Thanks Flexx hopefully mine will go away. Btw is the pipes aren’t cheap on the website any Flexx discount? 😂

[@TheFlexxGarage]

Reach out directly to tornado tuning via email. And tell them that I referred you. They should be able to knock off a few dollars. Their contact info is in the video description.

[@clayhorn5451]

@@TheFlexxGarageYo Flexx did you ever end of finding out what was causing the code p0068 ? My mechanic says the only way to clear it is to buy a new turbo .

[@clayhorn5451]

Did you figure out what was causing the code ?

[@marcozr3138]

Can you tell me if this reduced intake air temps please

[@TheFlexxGarage]

I didn’t measure the temps but you can reach out directly to tornado tuning on questions. Their contact info is in the video description. They did all sorts of testing on their parts.

[@TsukuyomiPrime]

So one is a charge pipe the other is the inlet pipe ? They say inlet pipes adds performance vs oem

[@TheFlexxGarage]

huh? Both are considered charge pipes. One goes after the turbo and into the intercooler and one goes out from the intercooler and into the throttle body. You want both to keep the air cold.

[@sflenterprises]

What do you do with the old pipes? Sell them?

[@TheFlexxGarage]

Tossed them out. They were taking up room in my garage and would cost too much to ship as a giveaway item in a video.

[@Madeasy4you]

Where can i purchase it

[@TheFlexxGarage]

Check description

[@shahidazam1376]

How much h does turbo hose pipe cost

[@TheFlexxGarage]

Don’t know. You need to message tornado tuning. Their contact info is in the description.

[@-robster-robster-]

nice oily old sensors and air intake courtesy of pcv /breather next mod should be a catch can to stop this happening again

[@pcetwins]

Pipes are good but over time damaged my car, I needed a new turbo after 6 months of having the pipes. Not worth buying.

[@TheFlexxGarage]

Do you know how a turbo and charge pipes work? You know that the turbo is before the pipes. The pipes have zero to do with the operation of the turbo. All they do is be a channel for the air that comes outta the turbo. Silicone pipes are durable and don’t hold a lot of heat like plastic or rubber pipes. Every performance intercooler kits uses the same silicone charge pipes. Your turbo failing is another issue. Don’t be blaming charge pipes. 🤣

[@latchmangoberdhan9813]

Pipes