Mercedes C250 Engine Noises (W204) from bad Engine Mounts & Annoying Sounds HOW TO REPLACE MOUNTS

Tool Link if needed: amzn.to/3Uwajgu for the 16mm Engine Mount Socket Wrench For Mercedes Benz W220, W210, W203, W221, W211, W204.
Are you experiencing annoying Engine Rotational sounds heard throughout the cabin, at idle, or during light acceleration? It may sound like the intake manifold is leaning on the frame, the high-pressure fuel pump leaning on the firewall, or the whole engine leaning on the frame or body of the car. It even may sound like body plugs are missing on the firewall? Watch this video as I diagnose and repair on my own with my "BEST GUESS" on what the issue could be. You may be surprised. I found the fix and the repair made a night and day difference.
Here is the link for the SHORT video about Stew's Self-Service Garage": • Stews Self Service Gar...
(The tool link is an affiliate link and I will receive a tiny commission)
Do you Ride?
We are "MotoTouring World Wide". Post your favorite photos of your motorcycle, especially during travels at / mototouringworldwide / mototouringworldwide

[@MotoTouringWorldWide]

Tool Link if needed: amzn.to/3Uwajgu for the 16mm Engine Mount Socket Wrench For Mercedes Benz W220, W210, W203, W221, W211, W204.

[@jz7546]

Great, I can see your detailed introduction on how to solve this noise problem. This noise has been bothering me for 3 years. After watching your video, I took the car to a repair shop to replace the engine mounts. I am from China and have been trying to repair it in the past few years, but the repair shop says it's normal noise, but I really hate this noise. I hope it can be resolved, thank you!

[@MotoTouringWorldWide]

Thank you for watching, I went through the same thing you did. I took my car to a professional Mercedes-Benz dealership and they told me it was normal. I did not believe them, then I took it to another very nice Mercedes-Benz dealership in the city and they also said it's normal. I did not believe them so I had to fix my Mercedes myself. I feel very confident your car will sound like new and will be nice and smooth and quiet 🤙👍👍

[@jesus123912]

You are the man same issue was driving me crazy thank you so much

[@MotoTouringWorldWide]

Thank you for watching. 🙋‍♂ I LOVE it when I find out my video has helped someone elso with the same problem. Have a great week 😊

[@dgonzz90]

Thank you for sharing! Wife drives a w204 and all those cabin noises are driving me nuts. My w210 is soooo quiet

[@MotoTouringWorldWide]

Hello and thank you for watching 🙋‍♂️. All the noises were driving my wife and I nuts. We bought this low mileage C250 as our Christmas present. Now that it's fixed we LOVE this C250. Probably the best car I've owned so far 👍. Hopefully you have success fixing your W204.

[@mcmodl]

I'm so glad I found your video. My car has the EXACT same noise. I will get started repairing my W204. By the way, your Benz is SUPER clean from top to bottom. Looks factory-new in the engine compartment. Not even a smear of oil residue.

[@MotoTouringWorldWide]

Glad it helped. I do have a little OCD and keep my car VERY CLEAN. ❤️👍

[@lancegraham7722]

Same here with the noise in the cabin. I have the c200 kompressor in Australia so the same design, just reversed for rhd. My rubbers are as flat against the mount as possible and after rebuilding the supercharger which, 2 mechanics, including a mercedes tech said it was, the noise remained..so now I. Convinced it is mounts. Cheers for a great video.

[@MotoTouringWorldWide]

Hello Lance, thank you for watching 🤙🙂, the sad thing is,, is I brought my car to 2 Mercedes-Benz dealerships here locally,, the first dealership said it was normal, and I drove for a month hating the sounds and noises, I then I brought it to a high-end Mercedes-Benz dealership near me and they also said it was normal...... I called bulshit so I had to fix the car myself. With simple tools and a hoist the job takes only about 2.5 hours. I wish you the best and I'm pretty sure your MB will sound whisper-quiet once you have new mounts. 👍👍🙂🙂

[@lancegraham7722]

Thank you again. I know it's been a few months, however the issues you mentioned were in fact 100% correct. New mounts x3, the trans mount was the worst. Also the bottom of the front mounts were so soft and soggy. Again, thank you and I paid a mechanic, 400 australian and all fixed. 👍

[@MotoTouringWorldWide]

@@lancegraham7722 THAT IS GREAT NEWS!!!! I'm so Glad your car is fixed!! ❤❤😊😊🙋‍♂🙋‍♂

[@noeturrubiates1068]

I was about to replace my turbo, but then found this video! I have the same noises. I’m ordering the mounts to give it a shot. Thanks for the video.

[@heathermodl380]

My car the same noise, thank you for the video .

[@MotoTouringWorldWide]

You're welcome! And thank you for watching.

[@123Suba123]

My 220cdi 2011 313 000km have same issues.. I ordered parts and now need special tool also or welding my own.. Thanks for helpful video!

[@MotoTouringWorldWide]

Hello Jesse 😊👍. Thank you for watching. I'm so glad the video was helpful. The noises were driving me crazy. Let me know how it turns out on your car. Have a great weekend 👍👍

[@lard1892]

No special tool needed

[@DankTech]

Funny enough I've been getting ready for this job, got all my parts and everything, and Stew's is closed as they're sub-leasing the work stations out to Rivian. I guess it's time to do it in the driveway. oh boy.

[@MotoTouringWorldWide]

@@DankTech ,, I drove by the other day and I was upset when I saw Rivian Trucks take over. It's going to be tougher to do your motor mounts mostly from above but it can be done. Have a jack stand on each side of the car, then you can use a floor jack to raise and lower the motor when removing and installing the mounts.... I was going to do an oil change and overall inspection at Stews Garage, but now I have to do it at home in the parking garage. I purchased an oil suction machine to suck the oil out of the Mercedes. I will post that video soon, it turns out it's much easier to change the oil with the suction machine. I wish you the best with your motor mount replacement. Please let me know how it worked out for you. Have a great weekend 🙋‍♂️🤙😊

[@DankTech]

@@MotoTouringWorldWide there’s a shop up in Everett I might check out, the oil extractor is a huge quality of life improvement, a ton of uses! Makes oil changes take 20-30 minutes, although my wife’s car has the filter underneath the car so I still have to lift it.

[@moeobaidat4101]

Only video I found on the c250! Very informative. Thank you.

[@MotoTouringWorldWide]

Hello and thank you for watching. I hope you are able to repair your Mercedes too. Warm Regards, 👍👍😊😊

[@moeobaidat4101]

@@MotoTouringWorldWide just now finished replacing them at home. Took about 2 hours. Pushing the passenger side engine mount up between the down pipe and firewall was a great tip. Thank you. Hopefully the power train sound is gone. About to go test drive it now.

[@moeobaidat4101]

@@MotoTouringWorldWide sound is gone! Finally!

[@MotoTouringWorldWide]

@@moeobaidat4101 I LOVE GOOD NEWS, GREAT JOB !!! 👍👍😁😁

[@moeobaidat4101]

@@MotoTouringWorldWide hello! So one week update. The sound was completely gone for a couple of days. Now it’s back slightly. Not as loud as before but it’s back on acceleration past 2.5k rpm. Also on start up the engine has a bang sound to it. Maybe I cheaped out on the parts or didn’t torque it right ? Any advice ?

[@ravem302]

Excelent content! thanks for the advice. I will replace these mounts soon cause the noise is really annoying

[@MotoTouringWorldWide]

I thank you for watching 🙋‍♂️, I'm excited to hear your outcome, once your mounts are replaced let me/us know how it worked out for you 🤙🤙

[@ShabaDabada-c2c]

​@@MotoTouringWorldWideHi. Me again. I already did it. It worked. Just i need to know torque specification. Noise just went away 🤓😃 but I have to make sure that I tightened right. Thanks a lot.

[@MotoTouringWorldWide]

@@ShabaDabada-c2c Hello again. I googled it and found 55 NM and 50 NM which equals 36 foot lbs for the FRONT ENGINE MOUNTS. I would use 50 Nm so as not to over-tighten. Since I don't know the year of your car. See if you find the same torque specs when you google it. Glad to hear that your car is fixed.

[@ShabaDabada-c2c]

​​@@MotoTouringWorldWide Thanks man. I Will check tomorrow. What I notice is the noise went away only when I replace the transmission mount. First I replace the engine mounts and give a ride, but noise still there. But next day when I completed the installation, the noise just disapear. Thanks a lot for your help.

[@kavkaz0076]

Hi, Thanks for the great content very usefull! I have almsot the same problem on my manual w204 (c200d stage1), I wanted to know if your car also made a loud noise et big vibration when you Turned off the motor ? Thank you

[@MotoTouringWorldWide]

Hello and thank you for watching 😊. A manual w204 C200d is an excellent Mercedes. My car does not have a loud noise or vibration when turning off the motor, but I'm thinking that you may have an exhaust heat shield vibrating or a turbo spooling down? Do you have an automotive stethoscope? It is very cheap and will help locate noises. Here is a link to an example: www.amazon.com/Lisle-Stethoscope-Kit/dp/B0002SQYSM?th=1 I would remove the black portion of the stethoscope so just the plastic tube is near the noise. The sound will travel and become "louder" to your ears the closer the "end" of the plastic tube is "nearing" the "noise". You will need someone to turn the car off while you listen and place the tube where you think the noise is coming from. I hope this helps with diagnosing the noise. Keep me posted on what you find. Have a great weekend. 😊👍

[@kavkaz0076]

Hello, thank you for your answer! After watching your video I changed the rear mount (of the gearbox) I started by this one because it was the cheap one, but the big (one time) vibration still here when I turn off my motor. I putted a full inox exhaust as the c63 with 4 piped about 3 months ago, but I don’t think it’s linked… I noticed on these last 2 days that when I drive really slowly it still does the strange sound but quieter and I feel the motor lifting a little bit around 2-2.5rpm, I guess it’s the big mounts. I’ll keep you informed when I get over this and hope my comments can help other people in the community ! Thank you

[@suryaprihadi2258]

U dont need to wait to sense such exessive "vibrations" to happen. When mild aging occurs, one can tell by simply sensing the steering wheel at idle with engine ON. I am hyper sensitive for these 3 mounts state of well being and 25,000km or 16,000 miles is my unpleasant limit for them as in reduction of super smooth behaviour. The higher the torque of the engine, example like my w212 E400 m276 turbo or others M278 V8 turbo, the more agressive one drive, these comfy mounts will loose its pleasure limit faster. If possible dont use lemforder, they are crap nowadays, stick to genuine MB ones. Left side mount usually suffer more, because engine rotation is clockwise if seen from main pulley. So left side engine mount get compressed while right side mount get lifted up under brutal kick down. Fyi my rear tires only last 12,500 miles from the way i accelerate, i dont do burnt out or anything of that silly sort, simply hard acceleration. Michelin pilot sport 4. Great documentation on the video, thank u.

[@MotoTouringWorldWide]

Hello 🙋‍♂️🙋‍♂️. Thank you for watching and thank you for this excellent information!! I will make sure to use genuin Mercedes mounts next time. Have a great weekend. 👍😊

[@jonathangarcia6407]

Hey I’m doing the engine mounts on my 2008 c350 I did all the steps but when I go to lift the engine the whole car goes up

[@MotoTouringWorldWide]

That is concerning, with both the top bolts off of the motor mounts, you should be able to jack up the motor a few inches to make yourself more room. I am hearing the V6 motor there is less room and more difficult but the motor shouldn't lifting the car up with the motor mounts unbolted?

[@jonathangarcia6407]

@@MotoTouringWorldWide that’s what I’m thinking you think something else can be holding it?

[@MotoTouringWorldWide]

@@jonathangarcia6407 ,, How about you "also" remove the 2 bolts under each motormount. Now there should be no reason the engine will not go up when pushing up the motor. Be sure that the oil pan is protected with a block of wood or similar to protect the oil pan. Are you using a hoist like I did in the video? If yes, then place the screw jack the same way I did.

[@jonathangarcia6407]

@@MotoTouringWorldWidethanks man I figured it out after I lift it the engine started to go up but first the car when up a good 3 inches your video help a lot thanks

[@MotoTouringWorldWide]

@@jonathangarcia6407 ,, I'm really happy you are able to move forward on the repairs on your car. Thank you for the update 🤙👍🙋‍♂️

[@anasazi.yazzie]

Great video, just wondering the size of the special tool to take the engine mounts off?

[@MotoTouringWorldWide]

Hello and thank you for watching 🙋🏻‍♂️ The tool is a Mercedes-Benz type tool with a 16 mm end. Here is a link from Amazon if you live in the USA 👍: amzn.to/41u4GCs

[@lard1892]

You don't need any special tools....only on a V6

[@MsJanjarac]

Hello and thank you for your video i have the same problem but i dont know how to find nr

[@MotoTouringWorldWide]

@@MsJanjarac ,, thank you for watching, looks like the last question was incomplete??

[@MsJanjarac]

How to find nr of the mounts i have w204 C200 year 11 / 2011 thank you

[@MotoTouringWorldWide]

@@MsJanjarac ,, sorry for the delay. It was 1:00 in the morning the last time I responded and went to bed. OK, what is the meaning of "nr"? In different countries, there are different codes or abbreviations. I will try to help 👍👍

[@MsJanjarac]

Hello thank you for your time do you have a reference number how can i order or some site on the internet because mercedes is too expensive thanks

[@MotoTouringWorldWide]

@@MsJanjarac ,, If you live in Europe, I would try: www.autodoc.de/?tb_prm=355612483&gadw=1&gad_source=1&gclid=Cj0KCQiAire5BhCNARIsAM53K1hiFo57Asz_RwfZVILk8tUQKsJB2zroItK5LcLn5tgSl0ZfFfRnRTwaAvUkEALw_wcB If you live in USA, you can try this website: www.autohausaz.com/mercedes-auto-parts/index.html?k=Mercedes&page=1 Hope they work for you: 😊😊👍👍

[@shotiko1991]

Hi, I have W212, have 100% same sound on acceleration, changed 2x engine and 1x transmission mounts as you did but still have that sound.. now I am waiting better quality transmission mount from Germany and also I'm doubting that sound also comes from bad drive shaft bushing.. what you think?

[@MotoTouringWorldWide]

Thank you for watching 🙋‍♂️. If the noise is only there during "acceleration" and you do not hear the noise when in park OR neutral, and if you do NOT hear the noise during "deceleration" ,, and then only hearing it during "acceleration",, then I would be focusing on your drive shaft. Another test, (and be careful when doing this,) put it in drive, put one foot on the brake, and give it some gas, but not too much, (nobody in front of the car), do you hear the noise in drive with some load on the engine? Is yes the problem is under the hood or the exhaust is leaning on something,,,,, if no noise I would focus again on the drive shaft. Once you have the car fixed keep me posted cuz I'm sure curious now 👍🙋‍♂️

[@AnthonyS80-V8]

Great video and Lemforder is a great product. Do you have the torque specs for the three mounts? It is very important they are torqued to spec. Cheers

[@MotoTouringWorldWide]

@@AnthonyS80-V8 hello and thank you for watching 🙋‍♂️. I'm having problems finding the torque specs for the rear transmission mount. The fronts are 50 newton meters or 36 ft lbs. My best guess for the rear is no more than 20 ft lb. I wish you the best of luck and I hope everything goes well. 🤙🤙

[@AnthonyS80-V8]

@@MotoTouringWorldWide Thanks for that. I have replaced the fronts and the tool came in extremely helpful. I have not replaced the rear as yet (much more easier) as I am waiting for the Meyle HD part to arrive. Will post the torque spec if I can find it!! Cheers

[@larabelvie2951]

i Fuckinn love this Video. 💪🏾😩 its Just some of the Purest content on youtube. identify issue. Solve issue. Step by Step. My word. well done mate.

[@MotoTouringWorldWide]

Greetings Mate 😁. Thank you for the best compliment so far !! ❤️ Hope the video was able to solve your problem too 🙋‍♂️👍

[@christianschuster4171]

Very good made video, thank you for sharing this!

[@MotoTouringWorldWide]

Thank you for watching Christian 🙋‍♂️, hope the video is helpful with your car 🚗🤙

[@mehmetbulbul6677]

Motor takozlarının arizalı olup olmadıklarını araçtan sökmeden nasıl anlayabilirim. Yardımcı olursanız sevinirim. Paylaştığınız video için teşekkürler.

[@MotoTouringWorldWide]

İzlediğiniz için teşekkürler. Videoda (montajı çıkarmadan önce) el feneriyle aracın altından motor montajının alüminyum gövde tabanına temas eden kauçuk kapağın yakın çekim görüntüsünü gösterdim. Ve telefonumla yakınlaştırdığımda sol motor montajı. Alüminyuma temas ettiğini göreceksiniz. Yaklaşık 1 santimetrelik bir boşluk olmalı. Bol şans. 👍😊

[@mehmetbulbul6677]

@MotoTouringWorldWide yanıtınız için teşekkür ederim❤

[@freedomin1995]

Thanks for the video and careful instructions! So I clearly confirmed that you shove all the way up, then how did you put the new mount on the passenger side? The same way? I just ordered mounts after watching your video :)

[@MotoTouringWorldWide]

@@freedomin1995 ,, thank you for watching 🙋‍♂️, yes when I pushed the old right motor mount up by the firewall. I lowered the new motor mount the same way I pulled out the old one. I hope everything works out smoothly with your motor mount installation. Keep us posted on how it turned out 🤙🤙

[@freedomin1995]

@@MotoTouringWorldWide Hi sir, I've just changed engine and transmission mounts, also the sway bar link. I really appreciate your secret sauce for pulling out shotgun mounts. It was like solving a puzzle haha. Anyway, my c250 is super silent and cozy! Thanks again for this video!!!

[@MotoTouringWorldWide]

@@freedomin1995 ,, EXCELLENT NEWS!!! Thank you for the feedback 🤙🤙👍👍

[@georgeanddaddecker7563]

They give you a loaded tool box to use as well? I wish we had this in the NorthEast.

[@MotoTouringWorldWide]

Yes they did. Each tool box is loaded with all the standard tool needed for every day work. Thank you for watching George 😊🤙

[@lungur.8789]

How is lemforder parts ? I put the same parts on my c200 3 days ago and i want to know it behaves over time ?

[@MotoTouringWorldWide]

Hello and thank you for watching 🙋‍♂️. So far the Lemforder has been great. My C250 is very quiet and smooth with no vibrations. Hopefully the last a long time 👍

[@Anderwist]

Wow, we just got same car for my sister and she has same noise. So motor mounts have to go

[@ayeyomyles]

I just bought the set online. How much do you think the mechanic will charge me for labor here in CA?

[@MotoTouringWorldWide]

Hello and thank you for watching. A good mechanic should be able to complete the job in 2.5 hours if you have a 4 cylinder. If your car is a 6 cylinder it is more difficult to remove the right motor mount and will add maybe an extra hour. I'm guessing labor will be around $500 for a 4 cylinder and $650 for a 6 cylinder. Please let me know if I'm off or pretty close. (it took me 2.5 hours to replace on my car and it was my first time). Thanks again and best of luck. 🙋‍♂️😊

[@franciscoloureiro2782]

I have a c250 om651, and it makes the same noise, the car vibrates from 120km/h and stopped vibrates between 1500 - 1800 rpm, I think it will be the support of the box, not least because the throttle shakes too. Can you help me?

[@MotoTouringWorldWide]

Hello and thank you for watching. What year is your car? If your car has the "same" noises and vibrations like in my video, I would definitely start with the engine mounts and rear transmission mount "first". You mentioned that the "throttle" shakes too, is this while looking at the engine with the hood up and the engine at idle? You may have 2 different problems that need to be taken care of.

[@rishabhverma5087]

Thank you for this video. This has really helped 😊

[@MotoTouringWorldWide]

Thank you for watching. I'm so glad to hear. No more weird annoying sounds I hope. Have a great weekend. 🤙

[@rishabhverma5087]

@MotoTouringWorldWide I was trying to diagnose an issue that seemed to be the same noises of when accelerating. Hope to sort it out soon.

[@rishabhverma5087]

@MotoTouringWorldWide Also, the vehicle vibrates at higher speeds 120km/h so I'm certain it's the gear box mount and engine mounting. Please comment on this. Thanks.

[@MotoTouringWorldWide]

@@rishabhverma5087 ,, the vibrations at higher speeds especially under load, with a bad rear tranny mount, may vibrate on the unibody. Hope you fix yours 👍👍

[@rishabhverma5087]

@@MotoTouringWorldWide noted. I'll replace 2 engine mounts and the gear box mount. Thanks will work on it sir

[@user-bw5hk5nb3k]

Hi, greets out from Germany : ( my drive is e200 cgi like yours and its have 168.000km The coldstart is everymorning a pain in to hell soo bad and so loudly noise from transmission, when its warm everything is gone but it is smilar loud : ( Have i good chance to replace every 3 Mounta and its feels like new car without loudly noise any more ? Have u the Partnumber from the specialtool ? : ( Thx u a big

[@MotoTouringWorldWide]

Hallo und vielen Dank fürs Zuschauen. Wenn Ihr Auto noch über die Original-Motorlager verfügt, sollten Sie diese ersetzen. Hier ist der Link zum Motormontagewerkzeug von Amazon. amzn.eu/d/bOVjX1D Ich wünsche Ihnen eine wundervolle Woche und viel Glück 🙋‍♂️👍 Hello and thank you for watching. If your car still has the original engine mounts, then you should replace them. Here is the link for the engine mount tool from German Amazon. amzn.eu/d/bOVjX1D Have a wonderful week and good luck. 🙋‍♂️👍

[@user-bw5hk5nb3k]

Yes it is the first one from factory at 0km : ( Do u have the dame problem ? Everymorning it is so loudly and give noises from transmission and than it is warm it is slowly a little bit not so noisy 😞 THX For everyhelps

[@MotoTouringWorldWide]

@@user-bw5hk5nb3k ,,, I would first replace the 3 mounts and then see if there are any other issues. Do you have any updates?

[@user-bw5hk5nb3k]

Hio, yes i have updates: 1. Transmission oil replaced 2. Transmission mount replaced The noises are gone but then i put the key off i feel under the sittingbank a little ratlling i think the motor mounta must replaced too or ? i am on now 169.200km never replaced the motor mounts : ( I hope the noises are gone any day :(

[@willysir8836]

Did you hear a clunking noise on small pothole or bumpy road ?

[@MotoTouringWorldWide]

No, that clunking noise was not an issue on my car. You would have to have really collapsed motor mounts to hear bumps on the road. Usually, clunking sounds will be bad suspension ball joint or bushing, loose skit plate, or broken exhaust hanger. When you put your car in reverse or Drive, do you have a clunking noise? If yes, then you may have a bad rear transmission mount?

[@lard1892]

You have grease all over hoist jack??? These are easy mounts...no special tools, mount comes out bottom. Whats the name of this shop???

[@MotoTouringWorldWide]

Thank you for watching. The red grease on the screw jack at 7:11 are in the threads and came that way from the shop where I rented the hoist. Yes, these are very easy mounts to remove and can be done from the bottom with no special tools. But the tool is good to have for most all projects. This SHOP is called STEW'S Garage. Here is the video link: kzbin.info/www/bejne/h4S5pGN4mtCfnKcsi=hsoXawBZ7_yVyYkb They have 13 hoists that you can rent by the hour. However, they rented out all the hoists for 6 months to the Rivian EV Truck company. So at the moment, you can not use a hoist when needed which is really interfering with my need to "Self" maintain my vehicles. Thanks again for watching. 🤙🤙🙋‍♂🙋‍♂

[@jrh86]

Excellent thank you 💯👍👍👍

[@MotoTouringWorldWide]

@@jrh86 ,, THANK YOU FOR WATCHING 🤙🤗

[@gansanchis]

Good job! like for your video and good luck!

[@MotoTouringWorldWide]

Thanks for the visit and thank you for watching 🙋‍♂️😊

[@gansanchis]

@@MotoTouringWorldWide The Best or Nothing (c) 😂😂😂

[@skippyone3085]

Nice vid, anyone know of this same job but on the 3.0 V6 320 CDI? Cant find one on YT, must be to difficult ?

[@MotoTouringWorldWide]

Thank you for watching 😊🤙. I did a quick check and found 2 videos for your car. See if these are good: kzbin.info/www/bejne/gF7RhKxqidRsmLc kzbin.info/www/bejne/bJ-kinlop92IeKc Hope they work out for you.

[@skippyone3085]

@@MotoTouringWorldWide thanks, I have seen those however the first is W211 mine is a W204. The second is an E class with far more room. There are lots of vids on the W204 but not with the V 6 engine. Problem I have is ... No room and two sets of exhaust headers. I have been told you have to either remove exhausts or drop the steering rack. Would be great to find someone who knows for sure.

[@MotoTouringWorldWide]

@@skippyone3085 ,, ok, I see now what you're dealing with. I have heard the V6 engine mounts can be a pain in the ass. I'll keep my eye out for you and hopefully find something 👍. Hopefully you don't have any rusty exhaust bolts to further complication. All I hope you have access to hoist because doing this on the ground can be painful.

[@skippyone3085]

@@MotoTouringWorldWide thanks! I don't have a hoist just a pit which is ok for most things !

[@maxdemonx]

I need to do this. My car sounds like it’s going to fly away lol

[@MotoTouringWorldWide]

Hello and thank you for watching. When you're done repairing your car please let us know your results if the motor mounts were the cause. Have a wonderful week 🤙🚗

[@caribeanm]

Que marca son los originales de mercedes?

[@MotoTouringWorldWide]

Creo que los soportes del motor de fábrica son Lemförde/Boge

[@caribeanm]

@@MotoTouringWorldWide gracias

[@shhh.justrelax]

What are the torque values for each bolt

[@MotoTouringWorldWide]

Thank you for watching. I have found 50 NM which equals 36 flbs.

[@kidfoodieusa3806]

Did you also have worse vibrations at certain speeds too

[@MotoTouringWorldWide]

Hello and thank you for watching. Yes I did and totally forgot about this weird sound & vibration at around 68 to 72 MPH. It was a plastic type of fluttering type vibration and I haven't heard it since the new motor mounts. After the repair, my ears have been enjoying piece and quiet. Be sure to inspect that rubber flap as in seen in the video and make sure it is not touching the lower part of the mount. It is a sign that it is worn out. I hope you have luck with your car 👍😊

[@kidfoodieusa3806]

@@MotoTouringWorldWide yea it’s like it would get into 7th gear and hum my c250 is a year older than yours and has double the mileage so it’s a lot worse but I knew that we had the same issue from that hum at idle

[@MotoTouringWorldWide]

@@kidfoodieusa3806 ,, I forgot to mention the rear mount too. With your car having double the mileage,, I think you should seriously consider replacing your 3 mounts if they have not been done. I'm actually very surprised that Mercedes-Benz engine mounts failed on my 2014 so soon. I Read other posts online about how the car is smooth like butter after replacing all the mounts.

[@kidfoodieusa3806]

@@MotoTouringWorldWide can you send the links to the parts

[@MotoTouringWorldWide]

@@kidfoodieusa3806 , Hello here is the parts screen, you may need to change the year of your car: www.autohausaz.com/pn/3358701 Here is the rear transmission mount: www.autohausaz.com/pn/11107 Here is the MAIN page for AutoHausAZ. You should register your year and model Mercedes and then shop around: www.autohausaz.com/ Wish you the best 🤙😊😊

[@baltasaar]

ill show my mom this lol

[@MotoTouringWorldWide]

Thank you for watching baltasar 😊🤙. I hope your moms car is fixed if she's having the same noises.

[@baltasaar]

finally she changed them, the c250 is like brand new now

[@MotoTouringWorldWide]

@@baltasaar ,,, THAT IS GREAT NEWS!!!! Glad your car is fixed!! ❤❤😊😊🙋‍♂🙋‍♂

[@georgeanddaddecker7563]

Mileage?

[@MotoTouringWorldWide]

64,000 miles. But keep in mind also 9 years old. (9 years of engine weight also compressing the motor mount too)

[@lard1892]

Mileage doesn't matter. These are junk mounts to start with