Armor Mesh Stringing Tutorial

[@Christianimber]

This guy never misses. That has to be one of the most beautiful sticks I have ever seen!! Keep it up brother!

[@cookeemon67]

honestly nicest looking stick ive ever seen once put all together. thanks for the awesome tutorial!

[@jeremyhood3427]

Well done! First stick strung in 35 years so process was appreciated

[@fracture83]

Thank you for this!!! I just followed along and strung the Pegasus armor mesh on a salty lax head.... no shooters and it's butter!!!! Can't wait for the local shop to get more in so I can do my other sticks.

[@thecellarseller34]

It doesn’t need shooters … cuz it was strung correctly !👌🏼

[@fantumlacrosse7356]

Ayyeee… too kind but also very true 😜 I love me a no shooter setup 🙏🏼🙌🏼

[@jonbar9272]

Thanks for the help with stringing. Turned out great.

[@saintsimonp]

Going to attempt stringing a Under Armor command low head tomorrow hopefully it comes out similar to your awesome looking pocket

[@mountaintimes7628]

Lovin that battle shaft!

[@fantumlacrosse7356]

Thanks!! Only a few left if you’re interested 🙏🏼🙌🏼🥍

[@SalishArtist]

Great instructional video! Where did you get the vise from that holds the shaft, while stringing?

[@Nyquil614]

Curious.... I have an old Brine The Edge head I used in H.S. way back when. How do you think an old 10 hole sidewall head would fair with armor mesh?

[@fantumlacrosse7356]

Sounds like a fun experiment! You should definitely try it out

[@big1543]

NOOB here! How do you decide what side holes to skip on the head?

[@fantumlacrosse7356]

I’ve strung this mesh a handful of times so I worked out a lot of the kinks before making this tutorial. There was plenty of initial trial and error

[@ToddBaginski]

Great video, thank you! My son and I strung up our first Armor Mesh in a String King Mark 2A while following your video and it turned out great! Have you tried flipping the mesh upside down and stringing it that way too?

[@big1543]

About to string up my boys with armor mesh on the same head! Did you use all the side holes?

[@kooabu]

​@BIG you kind of need to use all holes or else you'll lack depth in the pocket OR you skip a bunch of rows but I would advise against the latter

[@tommyrobertson3556]

I did and just so you know, it has a slippery release. it doesn’t effect much other than hold while in the pocket. would advise against, but others have complimented it so its really a preference!

[@fantumlacrosse7356]

Thanks for your feedback Todd!! Happy to hear your Mark 2A came out well 🙏🏼🙌🏼🥍

[@ToddBaginski]

Hi @@big1543 Here's the holes I used. 1 - Top String 2 - Sidewall lace start 3 - Yes 4 - No 5 - Yes 6 - No 7 - Yes 8 - No 9 - No 10 - Yes 11 - No 12 - No 13 - Yes 14 - No 15 - Yes 16 - No 17 - Yes 18 - No 19 - Yes 20 - No 21 - Yes 22 - No 23 - Yes 24 - No 25 - Yes 26 - No 27 - Yes 28 - No 29 - Yes

[@donaldhorne2180]

Looks Amazing, but also fairly deep, is it a "legal" pocket? I never played, but trying to learn about Lacrosse for my son.

[@fantumlacrosse7356]

Thanks for the props!! And yes! This pocket is legal. Most any pocket can become illegal with pushing or pounding but can also move back to “legal” with a ball moving throughout the head.

[@jasoncdriscoll]

Extremely talented.

[@fantumlacrosse7356]

Way too kind.. 🙏🏼🙌🏼🥍

[@fantumlacrosse7356]

Way too kind 🙏🏼🙌🏼🥍

[@thalleslima3974]

If you haven’t already given it away could I please get it bc I’ve been wanting to get into lacrosse but I don’t have money or gear

[@Co.lt.y]

Thanks for the beautiful how are you getting your new spider wire tomorrow

[@redrabbit3]

Which mesh would you recommend for D poles? Also with traditional mesh the top layer is doubled over. With this product do you know why it is not needed?

[@lukefletcher5500]

can you string from the side or do you need to start in the middle?

[@fantumlacrosse7356]

You could start from a side of you prefer but I find it easier to start in the middle.

[@harryluong1453]

What is that head mount you were using during the bottom string section? I need one of those

[@fantumlacrosse7356]

It’s called laxvise and I wish I had 3 more. They are no longer in production so I hope you can find one somehow

[@jaymoore2230]

Beauty! Do you still have this for sale? Or similar?

[@fantumlacrosse7356]

Thanks!! I can for sure string up another just like this one.

[@cullenpike972]

Does this tutorial work well with an ion head.

[@fantumlacrosse7356]

Absolutely!

[@Em3raldxx]

Is this spider wire or Pegasus

[@Illusi0n2999]

whats the cheapest you would sell a strung head with armour mesh, no shaft. also is this legal for me playing in high school.

[@fantumlacrosse7356]

Please feel free to DM my insta page. I’d love to hook you up with what you’re looking for.

[@ynvdrhnn8745]

how would you string the top string with something like a stx x20 as it has less holes

[@fantumlacrosse7356]

I would definitely string a chenango top string in something as wide as an x20. Use only the two middle holes top center and then attach your corners a few holes down your sidewall.

[@christopherkeating711]

@@fantumlacrosse7356 how does it effect the sidewall pattern when doing that? Like what changes would need to be made?

[@robertjuliana4193]

Did that stick sell?

[@fantumlacrosse7356]

This one was in fact for a customer but I could create another super similar if you’re interested.

[@robertjuliana4193]

@@fantumlacrosse7356 thanks for responding. Yes I’m definitely interested in having you strong up a couple heads if you can replicate them so they’re both the same which I assume you can. Are shooting strings necessary or not? Lastly are you familiar with the type K pocket from Throne Lacrosse? How do I contact you? Thank you.

[@andrewleblanc2449]

does it bag out

[@jasoncdriscoll]

Did anyone ever purchase that

[@fantumlacrosse7356]

I could string up another just like it if you’re interested..

[@rockthered30pg]

Pattern?!?!

[@fantumlacrosse7356]

It’s basically SI’s skipping 4 rows between anchors the entire way through.

[@davidbell1034]

Is it just me or did the pocket look to deep to be legal.

[@robertjuliana4193]

Please let me know how to contact you so I can send you a head to string. Thank you. Is there a phone number I can call?

[@fantumlacrosse7356]

Please forgive my delay.. if you’d like to send me a head I’d be happy to string it for you. Please DM through instagram so I can shoot you a number and address 🙏🏼🙌🏼🥍

[@willmanning6181]

how much would this cost/ @@fantumlacrosse7356

[@Co.lt.y]

I meant to say tutorial not beautiful

[@thecellarseller34]

It doesn’t need shooters … cuz it was strung correctly !👌🏼

[@fantumlacrosse7356]

Too kind Mr. Martin 🙏🏼🙏🏼🙏🏼