Arrma Vendetta 3s RTR Hidden surprise that will help all older 3s/4s Arrma line ? Find out here

[@rcjunkie260]

It is the clutch for the mega line! Only new wrench!!! Will it hold up in the 3s line of trucks???? Small tires on a street basher yes truck with big tires might not last!!!!

[@FLPatrick1095]

No, it wont. That little red nut strips itself too. So cheap and disgusting

[@rcjunkie260]

@@FLPatrick1095 you are absolutely correct! JUNK! Not nice Horizon hobby 🤨😡🤬

[@FLPatrick1095]

@@rcjunkie260 You can get a Kraton EXB for $469. $20 more. Scandalous 🤣

[@earlmoorhead5555]

Damn

[@FLPatrick1095]

@@earlmoorhead5555 Yea its probably fine for speed runs. It's not an upgrade though. Wont handle any kind of torque.

[@billbrogdon4261]

❤….so, here we are 2023 and finally got my first speed car…Vendetta….so, a long time coming and the vids are great….thanks for all the effort and info here

[@moereefer]

Thanks for the info I hade to go back to this for my friends new Arrma vendetta. Love all ur videos now u got at least 2 more subscribers from my friends with these rigs and they also like your current off road project 100 mph Arrma Mojave. Thanks 🙏

[@earlmoorhead5555]

Thanks

[@Madbusop718]

I've learned a lot about the Arrma Vendetta from watching your videos that I finally ordered myself one. Thanks for your in depth video and knowledge is key. Continue to stay blessed, humbled and creating masterpiece RC videos.

[@earlmoorhead5555]

Thanks 🙏

[@CCxRC]

This is welcomed news! I overtightened two of them. According to the site, the mega infraction is running .8mod/32 pitch pinion now. The old Megan’s ran 48 pitch that pretty much required buying the 32 pitch to go brushless.

[@ofromda860]

Absolutely best videos I've found on the Vendetta! Just got an Infraction BLX chassis to build one, but I just picked up a 6s v2 Infraction... now decided to build a Vendetta after finding your channel! The Infraction center brace will fir, sure you figured that out by now🙂

[@gamechangerrc4633]

Great video that slipper clutch is a huge upgrade for those who had issues like myself in the past. Thank you soo much for all you do and the lengths you and RC GUY go through to help us 👊👊💯💯

[@edgardovera6490]

excellent information needed to know about the stability bar the chassis and the clutch perfect revision to find out

[@ReadySetRC]

This was a great set of videos with the Vendetta! Thanks Earl.

[@MrtipRC]

So one reason I bought a Traxxas Hoss and I wish Arrma would do the same , center diff ! I've had zero issues with my Traxxas 3s line running center diffs compared to slipper clutch .

[@earlmoorhead5555]

The slash still runs a slipper clutch 👀

[@tonysmith7989]

I bought the center diff and lowered the diff lube for my rustler 4x4 vxl after buying the hoss and liked the center diff. After getting a notorious 6s and a kraton 6s v5 and having fun with them, I still find it fun to run the typhon and other 3s after.

[@MrtipRC]

@@earlmoorhead5555 nice , yeah I swapped out all my slipper clutches for center diffs .

[@MrtipRC]

@Founding Fathers parts availability and customer support are very important to me .

[@tonysmith7989]

I love the fact they put holes in the body above the tires. I'm hoping it is to keep gravel from grabbing the servo and in the rear to let debris out and not let as much to get in the casing with the spur and pinion causing issues.

[@sitbackdownpls]

That clutch system was in all the megas. I used it over the blx clutch often

[@TexJJN]

Really great mechanical explanation. Getting back into hobby and forgot how much I enjoy the engineering involved in it all. Great channel!

[@earlmoorhead5555]

Thanks 🙏

[@chadbiermann3380]

I know I'm late to the party but I am finally building a VENDETTA from watching these videos. Great content Earl!! 💯💯 You show a lot of different genres of this hobby. 👏🔥💯👍It's always nice to learn from someone who has been in the game for a while. I like the bench videos almost as much as the bashing videos. It's always cool to learn tips and tricks before going out and purchasing something so you know exactly what you can expect when driving a new rc. And what issues to look out for. Thank you.

[@earlmoorhead5555]

🚀🚀👍👍

[@kgm5512]

I’m glad they did that. My red shaft connector rolled into the abyss behind my bench in March and I have yet to find it 😂😂😂

[@nofreerides7033]

Thanks for taking the time to explain the details of a new rc … have a blessed day 🙏🙏🙏

[@earlmoorhead5555]

Thanks 🙏

[@ShenRC]

Very good info, glad they improved that slipper unit.

[@earlmoorhead5555]

Some say it’s from the mega line but I do see some changes to that as well looking at part numbers 🤔🤔

[@marcgebeloff2036]

Hey Earl, glad you got the first hand look at the new beast, can always count on you to pick up real details that matter like the new slipper. I bought one of my 1/10th arrma s as a mega, the typhon. Interestly, they chose to use a craptasticly frail gearing on the spur and pinion are tiny teeth, like you get on a WL toys that strip out immediately when you upgrade the power. It’s easily changed by fitting the 3s slipper. The mega slipper design looks similar though with the plastic nut to tighten and visible spring, that part actually worked decent so wondering if they combined the mega mechanism with an upgraded pad system . The sight said it’s a single pad set up which should make changing gears so much easier then the multi pad arrangement now. Two additional items I’m curious about you may have gotten a peak at… 1) they show new front and rear diffs, if you look at the sight they show a shot of them open and they appear to use a unique spider gear arrangement where the spider gears spindle ends are held securely in a hollow tube which potentially an upgrade for other 3s rigs if the bulkhead ‘ diff mounts are the same. I never had issues with the old set up and it may be that there geared differently to account for the small wheel size of the street rigs so not usable on the other units. You mention there plastic so I assume you saw them, anything you saw suggest we can use them on other 3s? 2) the part on front and rear bulkhead that the brace fits into, is that a piece you think could be fitted to other 3s rigs? Hard to tell, but it looks like the shock tower itself is where it mounts, that’s a shame because it’s a much shorter shock tower then the 3s… I never had any arrma 4s 10th scales, but maybe the outcast/kraton 4s towers would work on a 3s and be more appropriately sized. I agree that these street machines are probably more then rigid without it, but I have some of my 3s heavily modified to 4s machines with 3674 cans and belted tires etc which brings up the weight considerably, I would love to be able to add a tower to tower brace. I know there’s chassis upgrades but they seem too much added weight for there benefit. I will probably buy both eventually, but since I don’t actually do much street driving and already have 4 or 5 10th scale street rigs and a felony, limitless and zd racing felony sort of clone I am not in a rush and will probably wait till we see if the infraction comes in a brushless version since that is the one body style I don’t have yet and the multi terrain design seems interesting. There’s also a 4s infraction clone from hpi available soon, I’m a Arrma fanboy tried and true so probably go for the arrma even if I have to convert it to brushless first but it great to see a lot of new stuff on the market! On that note there’s two other new rigs of interest out there, the zd racing 7th scale desert racer which has gotten good reviews and the redcat kaiju ext. I was considering which one to buy first, in the end the kaiju ext won out so I pre ordered it

[@danjung1539]

That... wow. Thank you so much! I'm new to RC and got the Granite Boost and was trying to follow videos telling me to put in an allen wrench and I just felt stupid. This... makes so much more sense! Awesome, man!

[@SpeedSyko]

I love the idea of the upper brace, I thought there had to be a way to put one on my other 3 s lines. Thanks Earl!

[@Macgyver46]

My vorteks slipper has popped the screw twice while sitting in a box! Going to try this new slipper.

[@ervinmedina9014]

Ok, everyone is saying it's the slipper from the mega. If it's a durable change cool. If you strip out the spur it looks like you have to buy the WHOLE assembly. You Can't upgrade to a metal spur unless it comes as assembly. You would have to switch it to the 4s slipper style. Not sure about this until I see someone put Power to it and if it holds up! Great job Earl showing this new Vendetta!! Stay safe and bash on from Colorado!!!

[@earlmoorhead5555]

I put 6s to it already in the latest video running 104 mph cutting off it seems to hold up on a speed run being it’s a 50t spur now and 32 pitch 👍👍

[@leonbrown3dtec990]

Earl I was doing some research and the arrma Typhon v3 4x4 mega brushed buggy rc rtr has the same Slipper clutch as the New 3s Vendetta and the brush version infraction!

[@earlmoorhead5555]

Looks the same the big difference is gearing and pitch and that was the issue with the first mega the gear would strip first runs 👍

[@basslinedrc3dfpv827]

Hey Earl, I checked the part numbers for the spur gears and they are indeed different numbers. The Vendetta spur is ARA311103 and the spur clutch assembly is ARA311110 (lotta ones) while the Vorteks spur is ARA310947 and spur clutch assembly is ARA311034. Hopes this helps anyone needing the part numbers.

[@earlmoorhead5555]

Yes infraction 57 vendetta 50 but built the same

[@basslinedrc3dfpv827]

@@earlmoorhead5555 Yup!

[@fabianbermudez5708]

It's not new slipper clutch, this kind of clutch have been used in mega granite brushed in new version.

[@vitodambra72]

Yes that’s very true i remember seeing that, it’s definitely not new new. 👍🏼💯good video earl

[@STRIKER-ob9js]

Yes all brushed Version have the same clutch… I have upgrade my senton to brushless.

[@isiahman7047]

Thank God they changed the slipper that was the only reason I sold my big rock

[@THEMASKEDMASTER]

✌🏻😎🏴󠁧󠁢󠁷󠁬󠁳󠁿Dope info as always Earl👍🏻. Please can you do a couple of drag on 2s to see what times you get out of it ? The slipper in the 3s lineup are to tight out of the box. I usually loosen them up. I don’t really want my Senton & Typhon doing wheelies. Its cool for like 5 minutes. I’ve never tried to tighten it again after that if I do it’s fractions of a turn. Placing a line & or dot will help with controlling how much you turn it & keeping it where you want once it was set the 1st time. I know of a few people on KZbin have broken a couple & stripping a ton of gears.

[@DOFIXERR]

A very welcomed change. Everyone that had the 4s line probably experienced the nightmare of the slipper clutch set up.

[@earlmoorhead5555]

All my 4s line been ok but the 3s line I’ve gotten has had issues out the box 👀👀

[@DOFIXERR]

@@earlmoorhead5555 I had such a pain with my Outcast 4s. I ALMOST had buyers remorse, but once I figured it out (and many upgrades later), it became my favorite basher.

[@SpeedSyko]

Earl I put a post on my channel to have people check out your speed run video. Thanks for the info and testing. 👍

[@jeremystewart1785]

Interseting video and good information about the slipper and what to expect. I think its a great car for the money. Especially for people who want to get into some speed ripping on a budget. Upgrade some parts in the future and should be a fun little runner for sure.

[@DeRock401]

I noticed this too when I checked out the vendetta the other day

[@terance1974]

Yup that's a slipper that came in the granite mega, brushed motor and esc

[@mike-yc8bi]

Idk if it's a new slipper this looks like the crappy one from the v2 mega line... if you go look up the older brushed granite v2 model but I had it as my 1st rc seen when I changed it over to brushless it gave me all kinds of issues I hope they fixed it cause my old granite had like a 81t spur

[@earlmoorhead5555]

Yes rc junky said the same thing 🤔

[@mike-yc8bi]

Yeah as soon as I saw it I remember changing my mega granite to brushless the diff input gear was longer an had to be cut down to fit I ended having to all new diffs input gear an slipper out of the 3s line cause back then the v2 were actually different from brushed to brushless it was a mess but what's really funny is it's the same green color as my granite wish I could post pictures on here

[@vbspeed7571]

Those tires and rims look great 🇺🇲🏁

[@phillipfrey6597]

Thanks for the video. Guess they made a step in the right direction with the slipper but seems like they didn't step far enough

[@FLPatrick1095]

They downgraded it to a brushed slipper and charging $450. How is that a step forward?

[@phillipfrey6597]

@@FLPatrick1095 when you watch the video he said it is a good thing I didn't know it was from the brushed version but supposed to still be better then what they did have just going off what the video said

[@captainflannel8558]

was wanting n asked if a no prep drag body would fit on it that bein a better size comparision !!!cuz it appears to be that size sc 4x4 with short arms but most keeps sayin its not 1/8 scale its really 1/10, but a sc or 1/8 buggy wit a car body is 1/8 on road .a 1/10 on road is 4 tec sized n way smaller but i ask rc guy garage to ask u then i get a answer lol

[@nemocheerio]

Just to let people know. The shocks seem to be a new design also. They are adjustable. That piece that looks like the cap is actually the spring perch.

[@ivans6026]

My experience running this slipper glutch on my mega typhon 91t spur with a 33t pinion all 48p, is that the main failure for me was the plastic shaft that holds the bearing onto the spur gear it will always melt once it hit 90mpn+.

[@earlmoorhead5555]

Good to know 😳

[@IRONCLADRC]

Looks like the mega set up on the clutch. My son's mega typhoon has that Same setup. We run it on a vxl 3s combo no problems, at all

[@earlmoorhead5555]

Nice 👍

[@rcguygarage]

What I've been waiting for is what is called Easter eggs from Arma as little jabs towards Traxxas similar to what's going on between Dodge and Ford I don't think Chevy has anything

[@FLPatrick1095]

This isn't a new part its from the old Mega lineup. Cheaper slipper that they want you to think is an upgrade

[@earlmoorhead5555]

Says it’s the cheaper mega that I’d never buy all mine have the other style that break as well 🤔🤔

[@tooleyzrc1973]

The mega Senton has that slipper clutch assembly

[@earlmoorhead5555]

Different spur gear

[@DoRC]

Yeah that's the brushed slipper clutch. I don't know why they have it on this vehicle. It is a step down from what's in the brushless ones

[@allyoucando8486]

with my arrma granite blx have the slipper clutch, what i do I locked with metal spur gear, and never have that problem is gone forever

[@colinmorand129]

I've been running this setup on my senton for two years now , 50t spur gives you more top speed, they are a single slipper pad btw.

[@leonbrown3dtec990]

Great info I have the big rock and the Vortex 3s looking to grow 👌

[@earlmoorhead5555]

Thanks 😊

[@V8chump]

Oh weird my granite from well over a year ago has the new slipper clutch, I was wondering why there were a bunch of different versions online!

[@isaackshirley4695]

That was on the mega but it was a different spur

[@westtxgreg]

Oh wow good find!! Totally different slipper and driveshaft now. Been waiting on a metal spur but they’ve been out of stock. Jump on this slipper before it’s out also. 👍🏻

[@earlmoorhead5555]

Driveshaft looks the same 👍👍

[@rcjunkie260]

Don't buy single plate mega brushed clutch. Sorry

[@westtxgreg]

RC Junkie Ara311110 are you sure that’s the mega?

[@rcjunkie260]

@@westtxgreg yea unfortunately it is. I just changed that clutch out of my 9 year old's Granite truck. Now has hobbywing 120amp/3300kv. And I replaced with 4s extra clutch parts I had.

[@rcjunkie260]

@@westtxgreg that longer red shaft is held in by a pin. One clutch plate. The red nut strips out very easy!

[@rcjawn4479]

That's just like the slipper clutch on the arrma Mega brushed versions

[@earlmoorhead5555]

Almost different pitch and different part number then a brushed

[@phillybrc]

This is big! Definiely gonna look into this. so glad that little red spline is no longer removable. You lose that piece and your bash is over. Thanx earl

[@earlmoorhead5555]

Yes I agree 6 s here we come lol

[@phillybrc]

@@earlmoorhead5555 haha, EXACTLY. I ll be lookin forward to this on your channel.

[@rcjunkie260]

Mega brushed single plate clutch👎

[@phillybrc]

@@rcjunkie260 ohhh, it is. But i ve heard people using it, there isn t a motor plate to bend with this setup.

[@phillybrc]

@@rcjunkie260 not familiar withe MEGA at all. Good info man.

[@lowridr2]

i was hoping you put it next to a infraction its 1/7th scale but seems smaller

[@gillian9178]

Purly cost saving on the slipper down grade, the price in the UK for the slipper kit assembly complete with plastic spur in the current 3s BLX cars is rrp £50. The Mega slipper kit assembly complete with plastic spur is only £30 + the new Vendetta is to expensive with cheaper parts fitted.

[@earlmoorhead5555]

This is the 32 pitch brushless upgrade on the Maga line with a small spur from what I see on the part number I can find 🤔

[@burn1gotbeats]

i think i’ll be ordering that slipper clutch for my big rock thx Earl 😎

[@XethanhanzX]

Great catch sir Earl!

[@cj...rcdrag9723]

shoulda checked if the iroc body could fit the vendetta .that would've been better than seeing if that could fit a bigrock

[@carlosvelazquez4649]

Awesome teaching video, thanks for sharing the knowledge Earl.

[@earlmoorhead5555]

Thanks 🙏

[@edwardmatthews5899]

Could’ve at least come with a 4268 or 4274mm can with how much they charge for them I bet it’ll run hot after a couple of runs with that taller gearing,and you could dremel those motor mount holes to fit bigger gearing too.

[@tonysmith7989]

By the way, how dud you like the sound of the Vendetta? Sounded almost like todays real full size electric vehicles.

[@EXTREMERC416]

Its me who said that🤣. Knowing arrma they always try to make previous part compatible. The vorteks also can take the outcast 4s brace i believe

[@truboy555]

You sure they didn't go back to the v1 slipper clutch 3s line up..

[@dcgreen5305]

It's not new. It looks to be the same clutch as the granite brushed version.

[@rcjunkie260]

Yes single plate,It won't work with brushless motors and big tires!!!

[@joserifaie]

Awsome video like the slipper clutch 👌

[@ed0c]

i wonder if new slipper can fit in older style machines.

[@earlmoorhead5555]

I shouldn’t be an issue everything else looks the same 🤔👍👍

[@malkieboi]

Do you think they will put this new set up in the Infraction MEGA? Arrma usually like to make their cars upgrade ready. This would be a huge selling point for me on that new MEGA.

[@earlmoorhead5555]

Yes different pitch spur with a 55t is what I believe the part number showed when Rc guy looked them up

[@Nathan-qt2zi]

The holder is for the balance wire's well that's what I used them for

[@HardcoreRC]

for $449 it shouldn't even have a slipper, it should have a center diff, and deffo shouldn't have the plastic gears

[@earlmoorhead5555]

Yes but do you have any arrma 3s or 4s ?

[@HardcoreRC]

@@earlmoorhead5555 Senton, Typhon, Big Rock, Granite, Outcast 4s - so yes, also run the Big Road as a speed car on 8s and 105mph. Simple fact is that with the price hike ($615 in the UK) these cars should now come with a center diff and metal gears. I did notice that they had changed the slipper set up again, they also changed in from the V2 to V3 to try to stop it coming loose, clearly that didnt work, i did a video of how to correctly set the v2 slipper and try to stop it coming loose, and instead of actually sorting it with a center diff they take the cheap option and load the price still

[@rcjunkie260]

That is the slipper clutch from the mega brushed line! Nothing new😔

[@HardcoreRC]

@@rcjunkie260 LOL, so it is, its also only single slipper plate, that makes it even worse

[@rcjunkie260]

@@HardcoreRC yes single plate!!!thanks arrma for the quick fix🤥😡

[@josephrivera8463]

Isn’t that just the old mega slipper design now with a .08 mod spur gear instead of a 48p spur gear?

[@earlmoorhead5555]

Different pitch on the gears

[@Skyhigh_RC]

I will say the mega line did not hold up to there 30 mph that they stated on the box

[@Coyoterc1]

3rd 🥉that’s so cool. My problem with my granite v3 broken slipper. This is a great 👍 thanks for sharing

[@earlmoorhead5555]

Yes great easy fix now no more issues 👍👍

[@rcjunkie260]

This is from the mega brushed line of trucks! Single clutch plate!

[@abefavela6806]

Great insight man thank you!

[@NoLimitRC87]

Awesome m8 can't wait to get mine

[@woodycreasman8226]

Would you have to order that whole piece

[@johnmoulton2742]

My V1 granite has that design.

[@EXTREMERC416]

This looks to me to be the old mega slipper clutch but with a 0.8mod gear instead of the 32p one

[@EXTREMERC416]

Or 48p idk but tiny tiny gears

[@earlmoorhead5555]

32 p but a 50 tooth not a 55 t 48p 👍👍

[@restinpiecesrc5528]

Check out the mega versions of the 3s line

[@klausknudsen106]

I was pretty sure i saw a pic with metal spiders, must have been something else then, my mistake ;)

[@earlmoorhead5555]

The inside of the front rear differential have metal spider gears ⚙️

[@cixsvnoh1]

That is the same slipper clutch setup that they have in the arrma senton brushed motor trucks

[@earlmoorhead5555]

It’s different

[@cixsvnoh1]

@@earlmoorhead5555 oh okay it looks similar but I'll take your word for it I haven't really compare the two but thank you for the info it's good to know

[@soundmindtv2911]

Have you looked at Raz’s carbon fiber driveshafts? Any thoughts on the benefits or lack thereof?

[@earlmoorhead5555]

Yes I have videos of the front drive shaft hits everything you have to remove the support brace to run them 👍

[@TheTylerjoy04]

Was Thinking Putting The Big Rock Motor Into The Vendetta.. Will It Be FASTER Than The Vendetta Motor, With The 26t Pinion Gear?

[@earlmoorhead5555]

Kv is motor speed like RPM the higher KV the more it spins so less kv less spinning so adding a lover kv motor will slow it down with the same gearing

[@TheTylerjoy04]

@@earlmoorhead5555 Oooh I See... That Answered My Question... Thanks Man, I Appreciate The Info & Knowledge...! 🤙😊🤙

[@josephrivera8463]

So what's the max size tooth pinion your can fit in the stock tranny housing without modifying it?

[@EXTREMERC416]

Same chassis but one is v2

[@tonysmith7989]

What high desert hobby shop? Cali or Arizona? Wanna see how much they'll sale the one you used for the demo. Lol

[@earlmoorhead5555]

Phone numbers at the end of the video and the address

[@MudMonsterRacing4]

So the vendetta and the infraction mega are the same besides the electronics , body,, and adjustable links correct?

[@earlmoorhead5555]

None have adjustable links 🤔

[@MudMonsterRacing4]

@@earlmoorhead5555 I thought the infraction mega has composite links and the vendetta has adjustable turnbuckles . Sounds good. I just ordered the chassis brace stuff, metal motor mount from the vendetta and the driveshaft support.

[@williamthompson82]

Great vid and thanks for the info

[@earlmoorhead5555]

Thanks 🙏

[@jasonjohnson6085]

It looks like a 32p of the mega slipper that is 48p

[@lloyderc]

I’m wondering if limitless shocks will fit this car .

[@earlmoorhead5555]

There definitely to long 🤔🤔

[@Killa_b_rc]

What do you think about the 4s Kraton? I’m looking for an off-road for my 10 year old daughter. She mostly runs on road but wants a bigger off-road (her vorteks is too low) and I was just sharing vids/pics of her running to rc guy. Im thinking if I want to go with a used 4s then paint a new body or just find a 6s since it’s a lil more durable.

[@earlmoorhead5555]

It. Runs good 👍

[@raffikirsten9030]

But can we change the spurgear to metal on the Vendetta?

[@earlmoorhead5555]

Only using the 4s line slipper clutch

[@tiguyrc1963]

Good Job Again! Thank You

[@johnnyhaberfield721]

The red upper brace on the 4s was and is no use,it bends ya motor mount, ran my outcast for over a year without it,better handling and no motor mount bend.If it made a difference then why haven't the 3s range which use 4s chassis have them.they make no odds.✌

[@earlmoorhead5555]

My big rock bent the motor mount to and no brace ?? The brace only connects the front and rear diff housing then arrma made the ExB motor mount thicker 👀👀

[@johnnyhaberfield721]

@@earlmoorhead5555 uuumm.your right .

[@robertredzich7292]

Very tempting 👍

[@bluecollarbiker8005]

Just out of curiosity will this body fit on the infraction v2

[@earlmoorhead5555]

No 👀👀

[@ericbrooks1562]

Thank you sir.👍

[@juliuseder8365]

I know its not what the video is about but is it possible to fit the vendetta sway bar on a v3 3s typhon?

[@earlmoorhead5555]

Idk 🤷🏻‍♂️

[@juliuseder8365]

@@earlmoorhead5555 ok

[@DiogoReis]

Gone mine yesterday, do you have the part number of the brace? It is from what Kraton?

[@earlmoorhead5555]

The support brace for the vendetta?

[@DiogoReis]

@@earlmoorhead5555 yep, I found it, didn't know about the 4s kraton 😄

[@hero124xx]

VERY INFORMATIVE THANKYOU

[@TrashCanNinja87]

Why cant arrma come out with a durable and easily adjustable slipper clutch? Still plastic diffs to upgrade its close to $150. How am i supposed to recommend the 3s line when traxxas vehicles are so much easier to work on for the new person getting into rc.

[@earlmoorhead5555]

🤔🤔I like the slash myself as well

[@FLPatrick1095]

went back to Traxxas 3s line due to the same things. Arrma diffs strip after a few runs it adds up quick

[@EXTREMERC416]

That depends breski the car in half isnt easier to work on if you ask me

[@restinpiecesrc5528]

To me that looks like an arrma mega slipper clutch, my sons looks alot like it

[@earlmoorhead5555]

Yes funny thing is that’s the only 3s arrma I never got as it was brushed 😱😱

[@restinpiecesrc5528]

@@earlmoorhead5555 yeah, all the 3s blx use the same except the vendetta, but the brushes mega versions use the vandetta style slipper, but atleast it looks like mod .8 gearing, I think the reason why they went to go with the mega Style slipper clutch is because of the smaller tires less weight and less rotating Mass

[@terran319]

Where to get a fully assembled Center brace bar for the vendetta

[@earlmoorhead5555]

Center brace bar ? Not sure 🤔

[@terran319]

Thank you for your response and also had this car not even a month and ran it yesterday and the steering went out is it my esc or servo

[@earlmoorhead5555]

Servo

[@terran319]

Thank you again

[@imserious2187]

What wheels are those on the DB pro?

[@earlmoorhead5555]

Traxxas rustler wheels I’m modifying to fit 🔥🔥