Artemis M11 MK2 Regulator and Power Adjustment instructions

[@rayhartley7290]

Great Video Wes, Finally get to meet you,,, well sort of meet you. Nice to see the tunability of this gun. Keep up the Canadian content.

[@RS-dc7wy]

Awesome content! I'd love to see you create more videos. Cheers!

[@mikesbackyardeh]

Wes I have been looking at this air gun on your website for the last week lol. I think it looks like excellent value for the price I’m going to need one lol … great video very informative 👍👍🇨🇦

[@wesbashforthairgunarcheryf6166]

Thanks Mike!

[@maximumeffort7836]

Very nicely explained thanks 👍 Is there any advantage to taking out the Belleville washer stack and rearranging them ? Some of these models have weird stacks of (() ((())) ()), and I have read usually they are stacked () () () () for low pressure and (()) (()) (()) for high pressure 🤔

[@longyx321]

Have you tried a different stack?

[@saidal4222]

Can you make a guide on how to adjust the trigger? I cant find it anywhere, the out of box trigger is too heavy and has a lot of creep in second stage

[@Gunner-ll1zd]

Good info

[@jerrycrowe8448]

Thanks I wish you had a few more videos especially concerning your import line of products.I don't love a videos on working on the trigger and Ive been patient in waiting for some replacement magazines as the one that came with and the extra are terrible.I have a non pal unit and my regulator is set at the factory 130/140 it's kinda hard to see exactly and I have been really trying to find some decent accuracy with my gun.I believe some of it has to do with the trigger while sometimes I believe it may be barrel I hope to run a shot string and see where I sit after that

[@longyx321]

I found that the hammer tensioner moved during use. So rather than using Locktight I bought another side hex screw (one of the 2 which hold the silver plug) longer than original and cut it just long enough to pinch the hammer adj screw to prevent it creeping.

[@wesbashforthairgunarcheryf6166]

Good idea!

[@mattsmith9225]

Any idea where I can get a new hammer spring for the M11? Or one that is the same???

[@wesbashforthairgunarcheryf6166]

Sure I've got some here. I'll put them up on my website

[@wesbashforthairgunarcheryf6166]

airgunarcheryfun.ca/artemis-m11-hammer-spring/

[@mattsmith9225]

@@wesbashforthairgunarcheryf6166 you legend!!

[@mattsmith9225]

@@wesbashforthairgunarcheryf6166 thanks for that Wes. Massive help. Will be placing the order once I’m paid next week. Will also be buying the brass power adjuster and the UNF adapter. Thanks a bunch for your help!!

[@wesbashforthairgunarcheryf6166]

@@mattsmith9225 you're welcome!

[@waheedtareen3897]

Great useful review. Can you pls help me to guide about what is the procedure to increase number of shots on my Snowpeak M25. Its just giving me around 25 shots per fill on company settings. Thanks in advanve

[@wesbashforthairgunarcheryf6166]

Hi! Sorry for the slow response. I would start by turning down the hammer spring tension at the back while using a chronograph. You will have a minimum velocity you need for what you are doing so that is going to be determining somewhat your shot count but if you are getting such a low shot count it sounds like quite a bit of air is getting wasted so I think you should be able to turn down your hammer spring tension some before losing much velocity. That will help a lot. If you aren't needing a lot of power you might try removing the pressure tube and turning down the regulator another 25 or 30 bar and then doing the hammer spring test over again. The lower the regulator the more shots you'll get a fill, though you need to balance the hammer spring tension for the regulator pressure or more air will again be wasted. Hope that helps. Another thing is to avoid using too light of pellets. Pcp are generally more efficient with heavier pellets so you can squeeze a few more shots out by upping your pellet weight.

[@volcanicash4893]

Hey Wes! Subscribed! 👍

[@mattsmith9225]

Hey again Wes. I’ve recently had mine apart to add another transfer port one putting it back together. I can’t pull the bolt action back at all it’s catching on the trigger but can’t work it out for the life of me been sat here couple hours

[@mattsmith9225]

Sorted it now Wes. I’ve put a 5mm Transfer port in it and tensioned the hammer spring up but not achieving what I want. I was using a 3mm port and hammer spring tensioned to full and achieving 33fpe. With the 5mm I’m only achieving 27fpe. (Same pellets) my regulator is running just under the 2. any help would be much appreciated

[@wesbashforthairgunarcheryf6166]

@@mattsmith9225 glad you got the cocking issue fixed. Sounds like the regulator is set pretty high. You may need a heavier hammer spring to take advantage of that higher pressure

[@wesbashforthairgunarcheryf6166]

A longer spring of the same gauge wire would work too. I believe I still have a few of the springs here for the non regulated version of the M11. They are quite a bit longer than the regulated version.

[@mattsmith9225]

Cheers Wes. Think I’ll be buying the brass power adjuster very soon so I may aswell grab a Hammer spring at the same time from your site. Will try find a business round me in the mean time that could make me the same spring might be difficult though. Gonna try bring the reg down at the weekend fill it back up and see if that makes a difference if not I’ll strip it down and put the 3mm port back in for now until I have the new springs. Is there anything else I would need?

[@wesbashforthairgunarcheryf6166]

@@mattsmith9225 Hi! That should be all you need 👍thanks

[@samirpineda2219]

Hola amigo ese rifle m11 que calibre es y a que potencia llega

[@wesbashforthairgunarcheryf6166]

Hi! If you order the high power version then it will reach a velocity of up to 950fps in 25 caliber and over 1000 fps in 22

[@samirpineda2219]

@@wesbashforthairgunarcheryf6166 gracias amigo