Artemis PP700-W and PP700S-A - Review pt.1

[@rayhartley7290]

I have watched this video a few times now. Great job with the detail of adjustments, power, noise, accuracy....

[@buijs1967]

Great review, it is always appealing when you easely change several settings on a pcp. Please also review the PP750.

[@atakardesh3991]

Bro do a video on Artemis PP750 pistol ..It also has magazine and removeable shoulder rest.

[@jamienorton4655]

Great review, very informative and well presented. Makes me think the W might be better as a little quieter, but about 40% cheaper in UK.

[@josephschmoberg6778]

Thank you for the very, very well done video. I'm in the process of buying one of these guns and your video was of great benefit.

[@swagonman]

Have you noticed that the PP700SA barrel shroud looks almost identical as the Steyr LP10 competition pistol’s shroud? Nobody seems to mention this. The slots on the side are meant for barrel weights. And I noticed an accessory to attach a laser. I wonder if the Steyr accessories fit. Seems likely.

[@gregorkamensek3923]

I don't know, but now that you mentioned it, you are right, they look identical.

[@qg786]

I have the PP700W. It's a nice little air pistol. I made a take down stock for mine.

[@gregorkamensek3923]

It is probably much better than the one I purchased for it...

[@qg786]

@@gregorkamensek3923 If you have access to a 3d printer check the thingiverse link out www.thingiverse.com/thing:2857458

[@therodenthitman]

@@qg786 Nice work! That looks great.

[@qg786]

@@therodenthitman Thanks. You can get neoprene rubber that sands easily to a nice finish, that you can epoxy it onto the stock.

[@surreallife777]

Hi I just got my PP 750 snow peak last week. Looking to increase the power. I was😢 told to cut the hammer spring. Second stage would be to adjust the regulator take the gun apart and the third one is to do some Drilling so there's three steps as far as I understand. I don't want to go too crazy because I want to keep the shot count around 40 with a 22 caliber. Probably around 14 fpe. What's your opinion?

[@gregorkamensek3923]

Hi. PP750 is not the same as PP700. I don't know the internals of PP750 but I cannot imagine how cutting a spring would help increase the power. Also, the shot count will drop quite dramatically if you increase the power.

[@surreallife777]

@@gregorkamensek3923 thanks appreciate it

[@AirVelocitySport]

Great video! Good detail review as I too am not that familiar with pistols. Thank you!

[@adriancox-thesantjordigolf3646]

Tell us about the adapter for the moderator which you can fit.

[@gregorkamensek3923]

I never bought it so I don't know...

[@themerc3384]

Can you turn the power up on the pp750 the same as the pp700sa ?

[@knifeslove8647]

Hi i have 2 of those and both have the problem that they blow air from the breach and. I tighte it but it's the same. Are yours also so?

[@gregorkamensek3923]

I haven't have any issues so far, but I do not have it very long...

[@knifeslove8647]

@@gregorkamensek3923 ok thank you. I have mine since it came out. Maybe they have corrected it

[@davidmg1925]

Glad you said they are not quiet. Off my list but top job mate for saying.

[@chrisfigueroa3361]

Awesome video man I want one of those gun thats crazybthat it has a reg and hst adjustment thanks for sharing bsafe very kool lil gun 😎

[@mehlcarelse4319]

Gregor can you please do a video to show how you adjust the power on the .177 pistol. I just bought one like yours and i want to shoot NSA slugs through it. Pleeeeeeze.

[@gregorkamensek3923]

Hm, not sure if I will make a video about that but I can give you some advice. It is only a matter of adjusting the hammer spring under the stock... For more advanced settings, regulator adjustment is needed...

[@jhonnywizer]

Muito bom o video. Melhor que vi até agora falando sobre a pistola.

[@bushwhookie1334]

hey are you getting pp750 and show the power it can get

[@gregorkamensek3923]

Probably not. I purchased PP700, I might get PP750 for a loan but I am not sure if it will be possible. PP750 looks very nice but I doubt that it has as high power potential as PP700 because it uses pellet pusher and has shorter barrel...

[@bushwhookie1334]

@@gregorkamensek3923 well thanks to you my pp700sa is getting 24fpe with h&n 23gr slugs.. So the 750 is shorter than the 700sa? 750 has 250 bar on would that help with power.. Found out you can adjust the airflow in side the tube

[@gregorkamensek3923]

@@bushwhookie1334 The design of the PP700 is that the barrel comes further back allowing the barrel to be longer at same pistol length. The 750 has the loading breach moved forward so unless the whole pistol is longer, it will have a shorter barrel. PP700 is regulated, not sure about PP750, but if it is, the higher pressure does not necessarily mean that it can achieve higher power. These are all assumptions, I might be wrong.

[@bushwhookie1334]

@@gregorkamensek3923 it is regulated huma i was told it can be adjusted inside

[@gregorkamensek3923]

@@bushwhookie1334 No, it is original regulator.

[@normbautista494]

very nice video and informative. may i ask the hole size on the swinging block on the breech?

[@gregorkamensek3923]

I believe it is 4,5 or maybe 5 mm. I am traveling right now so I cannot check...

[@stevejohnson1797]

Good idia easy to turn power up very acurate great ad on folding stock, but down side is they leek like a old rotton sub!

[@ChristofferEricsater]

Hello, thanks for the review! Just ordered it. But I like to change the Front-Sight! Is black on black as it comes. I like to change to a red dot 🔴 fiber optic front-sight. The seller said one can easily remove the front sight with one simple screw. However, can someone in the airgun community please tell me who make third-party sights for the pp 700s-a !? Thanks!

[@gregorkamensek3923]

Yes, the front sight is easy removable but I do not know who makes 3rd parts sights for it.

[@bushwhookie1334]

I would just use glow paint for sights

[@rynofroneman6574]

The one you mentioned being turned clockwise.. is that the reg or the hammer spring you were referring to?

[@gregorkamensek3923]

I mention those separately, both are adjusted up when turning the dedicated screw clockwise.

[@ptescreen18]

Gregor Kamenšek so reg clockwise to increase reg pressure? Thanks 🙏

[@pierreevenceavaux6827]

Quite good video, Thanks. Could you tell me more about your red dot (mark and supplier), it looks much better than the one I got on eBay from China. Best regards, Pierre

[@gregorkamensek3923]

It is from Vector Optics. They have nice product, most of the scopes I use are from them.

[@redgum1340]

Nice looking pistol Gregor. On the SA model, how big is the air cylinder/bottle in cc's?

[@gregorkamensek3923]

I think the cylinder is the same on both models: 65 cc (based on info from manufacturers web page)...

[@rynofroneman6574]

How is the regulator adjusted? Meaning whitch direction of rotation increases the regulator pressure?

[@gregorkamensek3923]

It is in the video @ 15:15.

[@philkennedy342]

Thanks for sharing got these in both .177 and .22 and really impressed with them as you say they do need a certain amount of work to get them to your liking but once there they are for the money brilliant 👍👍👍

[@herbertdeleon7626]

Hi Phil, which one is your favourite? .22 or .177? I'm planning to buy one

[@philkennedy342]

Herbert De Leon to be honest depends on what what type of shooting your planning to do paper punching .177 hunting at close quarters like rats .22 believe it or not I've taken squirrels at 10 yrds with one and do it regularly very accurate little pistol even better with an attached stock and a decent scope the biggest problem is regulator inconsistency and the trigger isn't very crisp some are a lot better than others but definitely worth the effort😀😀

[@robbymaster271]

hallo niche video,, Can Yo tel my how the regulator Rings are standing there are 10 rings cleanig all parts of the pistol the rings are foling down

[@gregorkamensek3923]

I don't really know, I haven't got a chance to open the reg. yet...

[@Thunder_Light207]

The PP700SA is an excellent pistol that can take the folding stock, silencer (with adapter) and a 3-9x40 scope on low mounts, shoots accurately as well. Stripping her down reveals a regulator with 10 belleville washers (())(())((, plenum is in monoblock and exhaust valve body moves air up into the rotating loading port, 1mm TP for UK. Hammer spring is adjustable once you remove the handle as is the trigger, a concealed hole in front of the trigger allows access to the regulator via an allen key though this is fiddly. Folding stock folds to the side to be more compact though is wobbly, PP750 sliding stock is better. Likes JSB Hades and shoots consistently accurately with them. Pistol can be preloaded with a pellet and cocked when ready to fire, also easy to de-cock. All in all a fantastic little pistol that puts a smile on your face when firing 👍

[@davidvazquez7862]

Hi Gregor when is the review of the 25 cal huben k1?

[@gregorkamensek3923]

In about 2 weeks. This time for sure :)

[@bushwhookie1334]

on the regulater when you turn it clockwise to full will it stop turning and on hammer spring is it fully adjusted thx.... onix sport is it the same gun

[@gregorkamensek3923]

If I remember correctly, you will reach "fully open" state and it will still turn. I have not tried to turn it further so I do not know if it has an end point. Hammer is different, you will not be able to go more to a certain point as you will not be able to reach the hex screw anymore as it will be too deep...

[@bushwhookie1334]

@@gregorkamensek3923 ok well im getting ready to get one but i have $250 limit.. If i get this gun in .22 and stock be $270... But if i get the green one in .22 with stock $235.. But green one in .22 will it have the same power need to know before i do this.. Which one is better

[@gregorkamensek3923]

@@bushwhookie1334 What I described in the video is what I had in my hands. I do not know if the "green" in .22 will have shorter barrel but I assume it will. One thing is for sure, if the barrel is shorter, then the power at the same pressure will be lower as well as efficiency.

[@bushwhookie1334]

Well i got one from airgun & archery Canada asked if they will tune it for me and he said he can get it to 26fpe with 14 shots so i said do it lol cause in KY there no power limit cant wait to get it this week

[@Angelum_Band]

I wish we could get some of those gun here in the USA. No luck with the Huben K1. I wonder how to get a Snowpeak P12 bullpup. Do you know any site that is secure to buy one?

[@gregorkamensek3923]

Not really. But I am sure it is easier than in Europe :). I believe you can get huben at AoA or Airguns4patriots...

[@therodenthitman]

www.canadashootingsupply.ca/artemis-pp700s-a-pcp-pistol-22-cal.html Just ordered one from here, they ship to USA. You'll have to adjust reg pressure and hammer spring as it's set for 6fpe, Canadian price listed too.

[@alfvonharpe1819]

Excellent Video Thanks Mate

[@thelostviking6080]

Most informative video I’ve found on this gun! Thanks!!!

[@johnb5519]

Now you've done it. I'm getting the itch to get a new toy.

[@alfredodaus3642]

How much

[@gigagiga4172]

great pistol. thanks. wheare can buy only stock?

[@gregorkamensek3923]

you can purchase it here: www.rojal.si/en/shop/gear/mix/artemis-stock-artemis-pp700.html

[@tbtairrifletuning1520]

Nice video! I'm thinking of getting one of these for the 25m range at the club. Everyone else use powder burners, I'm hoping that once wound up to just under 20j the wind will have little effect on the 5.5mm pellets.

[@gregorkamensek3923]

Yeh, that is a good setting. You will need to go to about 120 - 130 bars with the regulator.

[@alexeymosco]

Thank you. I am waiting for my item, but from a different brand. I liked how you estimate the quality. I also got a colimator. In Russia we can afford it starting from 180 bucks. I will plan to do an empowerment of the weapon. It comes at 4 J from box. Almost forgot. I like your English and understand 100%.

[@gregorkamensek3923]

Thanks. You can understand me because we both have Slavic accent :)

[@alexeymosco]

@@gregorkamensek3923 wrong calcukation with all the buzz around currency rates. 243 usd is what I payed for ZR Arms branded thing. Curiously, we also have Strike One b027 selling at 300. Well, yes, I hear the Rrr very well. Are you from Chekhia? I did not speak much last 5 yrs, but my TOEFL was 273/300 . Let's keep friendship.

[@gregorkamensek3923]

@@alexeymosco No, I am from Slovenia...

[@alexeymosco]

@@gregorkamensek3923 gotta visit all Slavic countries one day.

[@johndivit5869]

Excellent Gregor! Best review I have seen of these fantastic pistols. However, I won't be pushing my S-A above 5.5 ft/lbs, (UK 6 ft/lb limit) as I kind of like not being in prison!! Great info. Thank you.

[@gregorkamensek3923]

LOL... Wise decision.

[@markhomer7628]

John ... Mine was pushing out 9ftlb + when I bought it ( out of the box from NEC ) did some fettling and it shot up too 13 ftlb , could probably have taken it up more .. only got 20 shots @ that power though .. anyway , set it back down to 5 ftlb ( accurate & loads more shots then 5.5 or near 6 ) still superbly accurate .. and that's where it's staying , as I too , don't fancy a stretch at my age ...

[@ptescreen18]

Mark Homer goes upto 19 if u need it to

[@wewekokowe6887]

You are the best reviewer, this pistol will not disappoint. It is not like FX marketing talking things up, then when you buy those...it is a let down usually. ...with a scope I am sure you could have easily shot 1or less inch groups🤘got one in .22 amazing. ...I did not know that you have 2 trigger adjustments, the second stage pull weight is a function of hammer spring compression. I wish they made some aftermarket grips

[@美国雅正-x5n]

I just got one, Solid piece!

[@PeakyBlinder]

Have you tried the pp800 yet.

[@gregorkamensek3923]

No. Actually, this is my first PCP pistol...

[@thekennyshow1369]

What can I hunt with it please and thank you

[@gregorkamensek3923]

I am not a hunter so I cannot give you advice with that...

[@martinduffy386]

Dont hunt anything.....You cruel fuck!!!!!!!!!

[@fredde90210]

I got about 180 m/s with 14,35 gr. pellets...Very fun air pistol 🔫

[@banningrandomaccsftw]

Can i ask what's the red dot model you are using please ? Thank you.

[@gregorkamensek3923]

The red dot is TacVector IMP 1x25x35

[@ptescreen18]

Thanks great video 👍🏼👍🏼

[@ДимаПупкин-л8ц]

Кто знает где в России купить приклад на этот пест? Кто смотрит подскажите плизз.

[@abdigitaluk_photography]

great video thank you

[@colburn333]

I wish you had opened the box and shown us the complete contents.. Otherwise very good.

[@AndreasEUR]

200 bar?? Do you mean PSI ??

[@ShayanQuanta]

200bar= 2900 psi

[@AndreasEUR]

@@ShayanQuanta I see that IQ is not that high today.. A normal tire takes between 2 and 3 bar.. 200 bar is INCREDIBLY high pressure. The dial on these pistols also shows green area to be around 20 bar.. So I assumes he means 200 psi, not 200 bar... But after googling more I see that I was wrong.. FIll pressure is actually 220 bar.. holy damn :D

[@gregorkamensek3923]

Bar...

[@canalchumboemacao7807]

Like amigo 👍

[@andersonwitherell5104]

Solid info, thanks

[@carsmax]

OMG someone stole your hair! LOL

[@gregorkamensek3923]

No no, I still have them. They are just not on my head anymore. :)

[@carsmax]

@@gregorkamensek3923 great answer!!!!!! love your vid´s

[@Angelum_Band]

@@gregorkamensek3923 Winter is warm where you live? Lol!

[@johnb5519]

Yeah, as my father used to say, he got his ears lowered.

[@gregorkamensek3923]

It is warmer than last year but it feels much colder without hair :(

[@tatankamanitu]

the grips of the pistol are bad , they are easily cracked if the butt is placed las cachas de la pistola son de muy mala calidad si se coloca la culata plegable se rajan muy facilmente

[@tom-x2w7h]

they are BB guns no power at muzzle and velocity is good for 20 feet and would sting at best and piss someone off and they will beat you to death with it

[@atakardesh3991]

PP750 is latest than pp700

[@tatankamanitu]

the grips of the pistol are bad they crack easily

[@carmineamato2711]

Ciao sono Carmine da 6

[@angelsdevils2956]

Was gonna buy untill "single shot 👈

[@gregorkamensek3923]

I believe the have a repeater available now...

[@tom-x2w7h]

2 joules actual at best, throw hand full of pebbles instead, save your money