Artemis PP700S-A in .22 - 25 meter accuracy

[@consumertester5665]

For those who can't be bothered with the maths, with the heaviest pellets this pistol is shooting at marginally over 23ft/lbs. For UK citizens this means "Go straight to jail, do not pass go, do not collect £200".

[@4D_Recovery]

Better put a big silencer on that and be responsible

[@4D_Recovery]

Im grateful to be living in South Africa at least I can buy a decently powered pcp and although we dont need a licence up until .22 One of the top shooters and content creators openly said that upon asking the cops about a liscence they told him as long as its air powered no liscence so nobody is really forcing those gun laws 😁👌

[@swagonman]

I tuned my .22 cal version to about 600fps for quite a few shots on a fill. I think it’s 45 or so. Pretty flat curve. Funny, the JSB 18gr is still the best for me. Earlier I had tuned to 740fps, but the trigger pull was too much, even when adjusted. The hammer spring was nearly as tight as it could go! So I backed it off for better trigger and more shots. BTW, I consumed a lot of pellets while tuning!!!

[@fredkarasek859]

I just received my PP700S-A in .177... What a ton of fun. I got mine from Wes up there at Airgun & Archery Fun in Canada. I'll have to try those JSB Jumbo Heavy in .177 and see how they fair.. Thank's for the video Gregor! A lot of fun to watch.

[@kevintravis2154]

Love my 700SA in 22 cal. Also love GK1 in 25 cal

[@josephschmoberg6778]

Bought this gun, your video was of great help in my decision. keep up the excellent work.

[@mikeenglish7063]

That's a lot of power from a little pistol. In UK we 're limited to 6ft lbs for an air pistol. But get a better shot count. Really nice pistols. I love mine .

[@tatankamanitu]

In caliber. 177 gives excellent results both in target shooting and hunting, just put a folding culatin and makes excellent shots, in caliber. 22 or 5.5 makes a lot of curve

[@jerrycrowe8448]

I've got the pp750 and am hoping to make it a 12/14 foot pounds of energy. I love it so much I am thinking of the pp700 solely for hunter fields target pistol and get it professional turned

[@mystrategy7755]

Can you do a video on how to get the ft/lbs up? I’m shooting in the dark here.

[@jerrycrowe8448]

You got that baby pushing some power

[@AirVelocitySport]

Accuracy is pretty good on this pistol!

[@ChrisGentleRock]

Dear Gregor, we are lounching a new silencer adapter without portingn next week, so all the air goes through the front silencer end. We would like to send you a free sample for testing. How can we reach you?

[@gregorkamensek3923]

Hello. You can reach me on email: stonemorek(at)gmail(dot)com

[@WaschyNumber1]

Is it not better to use a vice with a weight and than test shoot the pellets, with the hand they are to much variations. 🤔

[@alexanderhablick1642]

Hallo und danke für das Video. Ist es möglich bei der p700a die "drei löcher/Kerben" über dem Lauf als Weaver/Picatinny Rail zu nutzen, für ein Hawke Reddot? Danke

[@gregorkamensek3923]

Yes, of course, that is how I use it.

[@ddarkfly]

Thanks Gregor, thinking about this one and i think you helped me to make decision.

[@ginoderschütze]

I am about to buy one, how many usefull shots per fill do you get in that power configuration(700fps with 18grains)?

[@gregorkamensek3923]

I don't know because I don't have that power set and since GK1 was released, I don't shoot with it that much anymore.

[@ginoderschütze]

@@gregorkamensek3923 thank you anyways, this video on the PP700sa was really usefull for making my decition. Greets from Argentina

[@TheDjango1]

Good evening mosieur. Excuse me, but I do not understand English. what is the diameter of the best group? how much turn for the regulator? how many turns for the spring of the hammer? Thank you. Django from Belgium.

[@gregorkamensek3923]

HI. I did not measure the groups, you can get a rough size estimate form the video. It is not possible to know how much to turn the regulator as it is very hard to access and to know how many revolution you made. Hammer tension is set to max (you cannot adjust it further) for my setting of about 130 bars.

[@TheDjango1]

Hello, thank you for your answer. did you do any tests with jsb baracuda match 5.52?

[@gregorkamensek3923]

@@TheDjango1 No, I haven't. I prefer JSB, although Baracuda match is the best pellet of H&N selection so it would probably be very accurate as well.

[@surreallife777]

I just ordered this gun. I think I want to try shooting it with a simple scope like yours it’s more of a challenge. Can you recommend some small scopes?

[@gregorkamensek3923]

Hi. I assume you are talking about red dots. I use Vector optics red dots. They are a good budget option and a good match for this pistol. If you are talkin about actual scopes, I don't have any experiences with pistol scopes. Those have to be long relief version. I use scopes form Discovery and Vectors as well but I don't have any pistol scope.

[@surreallife777]

@@gregorkamensek3923 Yes, just looking for a very simple scope. The simpler the better because I want to test my abilities. Thanks for getting back to me.

[@gregorkamensek3923]

@@surreallife777OK, red dot is a good choice then. But pay attention to the mount. Almost all red dots have picatinny mount and the pistol has dovetail, so in this case you will need an adapter.

[@surreallife777]

@@gregorkamensek3923 👍 . Are you Russian? I’m half Russian half Greek.

[@gregorkamensek3923]

@@surreallife777No, I am Slovenian.

[@TheRedstoneNL]

is the standard regulator in this gun adjustable ??

[@gregorkamensek3923]

Yes, it is. But there is no gauge for regulated pressure so you kind of have to do it blind...

[@Meloncholymadness]

How did you get the power up?? I want to get mine up, it's at about 5 something foot pounds at minute.

[@gregorkamensek3923]

kzbin.info/www/bejne/rnOpeH-igtNsaZo

[@redgum1340]

Gregor, I love these videos, I have almost as much fun as you watching as you do shooting. LOL :-)

[@SUBOSVK]

Ake doporucujes strelivo z JSB?Vaha a aku sirku 5.50, 5.51, alebo 5.52???(v seriovom nastaveni).Dik. Pekne ti to plieska :o)

[@gregorkamensek3923]

I would use 5.52. The weight depends on the power settings you use. If you do not change the power from factory, then use 14 - 16 grain.

[@SUBOSVK]

@@gregorkamensek3923 ok,dik :)

[@thephatlander]

Which one do you recommend, the s-a or the w? How Close are they in performance?

[@gregorkamensek3923]

It is hard to say as I had each in different caliber, I would choose based on the looks you prefer and weather you want open sights or if you intend to use red dot. You may get slightly more power with S-A and maybe S-A will be slightly louder but otherwise, the main difference is the looks and sights ...

[@thephatlander]

@@gregorkamensek3923 sweet! What caliber would you pick, the 177 or .22? Is there a big difference?

[@gregorkamensek3923]

There is definitely a difference in power, you will of course get more with .22, but also slightly lower velocities. I would suggest you choose based on what is more important - shot count or power.

[@e.k.5107]

Very interesting video. Thanks for share. I am just surprised about the power .. more than 30 joules? are you sure? they announce 15 joules for this gun.! ...

[@gregorkamensek3923]

Yes, by default it is only about 15 joules, but with the regulator and hammer spring adjustment, you can get up to 30 J

[@e.k.5107]

@@gregorkamensek3923 thank you very much. Another video maybe? 👍

[@e.k.5107]

Such a power doesn't damage the gun?

[@gregorkamensek3923]

@@e.k.5107 No. It can take it without any problem.

[@gregorkamensek3923]

@@e.k.5107 probably...

[@philkennedy342]

Nice 👍👍👍

[@frikkiesmit327]

Thats loud for pcp. Nice gun

[@johnman559]

It's very loud can it be silenced?

[@gregorkamensek3923]

It is quite loud, you need an adapter to use standard suppressors for it.

[@davidmg1925]

It's not certainly not back yard friendly is it???

[@gregorkamensek3923]

Not really, it is quite loud...

[@leancapelari5501]

Quantos shots..tiros nesse vo??????????

[@gregorkamensek3923]

depends on the power. It is all in my videos.

[@anthonychambers9072]

What dia.are the slugs

[@gregorkamensek3923]

In this video I user slightly smaller 5.47 mm "head" diameter slugs but it works well also with 5.52 mm version it just needs to be of a soft allow to be able to load them

[@jerrycrowe8448]

I guess you're living in the USA as my understanding of UK pistol law is 6 ftb energy max

[@gregorkamensek3923]

No, I am actually from Slovenia. Our laws are a bit different but I have a FAC to be able to use unlimited energies on my airguns.

[@CandidZulu]

how big are the rings on that target?

[@gregorkamensek3923]

The outer rings are about 8,5 cm. These are the targets I user: www.targets.ws/shooting-targets/bullseye-target-16.pdf

[@e.k.5107]

Really accuracy shoots!

[@45mmluftdruckkeller6]

Sehr Laut das ding.

[@gemini1234able]

Red dots are rubbish, you'll do better with a decent scope!

[@rudiduplooy9998]

Useless information why not show us the chronograph results, what is the point of using it

[@gregorkamensek3923]

I think you need a better monitor or phone. The crony results are clearly visible:)

[@carsmax]

Redesigned and still bad!!

[@gregorkamensek3923]

Now that I have lapped and made a new crown on the barrel, they are very accurate. It is also very interesting, it seem that JSB has increased the head diameter their pellets. The new redesignes have 5,56mm head as well as the new batch of Jumbo heavy, they have 5,58 mm (before they had 5,52). I have to try them in K1 now, the might work much better... Both old (on the video) and new Jumbo Heavy are very accurate in this pistol.

[@carsmax]

@@gregorkamensek3923 Yes Gregor, and the skirt is wider too! Less damage when U putt the pellets in to the magazine