Ashford - Winding a Warp

There are many ways to wind a warp for your table loom. Here is one way - using the warping frame and making two crosses.
Warping your loom part 1 • How to put a warp on y...
Warping your loom part 2 • Ashford - How to put a...

[@erinfough4344]

I have watched this video MANY times. I have never needed to look for another video showing me how to do this because this one is so well made and clear. I just bought a small warping board which doesn't have the raddle crosses built in, but after watching this I realized that it will be worth building in a raddle cross to the warping pattern and maybe adding 3 pegs to the unpegged board later.

[@HiddenOaksFarm]

I agree!

[@harleycoder]

I got a Gilmor Mini Wave loom for Christmas and had no idea what was involved. I picked up an Ashford Warping board yesterday and was thankful to find this video. I made a warp - think I did it right - and now it's time to sit down with the loom!

[@caracolita83]

I made it the first time like instructed here. It is great how simple it is. Weaving live can be so easy ;) Thank you Kate for your detailed explanation. You made a good job! ♥

[@petebartlett2229]

All the videos and finally one that makes total sense!!

[@Nancytoday]

What an interesting way to do your second cross. I like the idea of keeping your groups of ten separate like that.

[@DuchessRed]

But.. but.. having yarn rolling around on the floor is such great fun! Especially if you have cats.

[@lindasamuelson4216]

So true!

[@Charliepup44]

Question: I have no trouble cleaning 95 percent of my banger except for the same spot , over and over. There is a section in the convex bottom in the valley where product has burned more heavily , harder to clean. I use a manicure tool to scrape away the burn. Is this because I am not heating up the banger properly? Holding the heat on that spot too long?

[@tonybeeguy]

This was very helpful. You explained it well, went slow onough so that we could catch what you were doing and showed some closeups of the crosses. Very well done.

[@stollenmaker]

I have relied on this video for some time. I have acquired an Ashford Warping Mill. Have you made a video on winding a warp on the mill? I’m a bit fuzzy on how this would work on the reddle cross.

[@lanas1795]

When winding an odd number of warps (color changes), is the thread cut and new thread tied to old at the end peg? Thanks for your video

[@shesarainb0w]

I am a newbie and I don't understand why you only cross every 10 threads at the bottom? Because there are 10 threads in a half inch but why is that important? Please clarify, thanks!

[@RKHageman]

So she can have exactly the same number of threads in each space in the raddle.

[@marlenemesa181]

For this warp , can you use a PEG .

[@sallytse1272]

Is that for weaving use？

[@joelhuebner]

I have a large 36" x 36" warping board. I don't use it on my Newcomb Studio 48" with a "sectional back beam". It was really easy to warp, I have the Newcomb warping tree and the tensioner. Recently I added a Leclerc Dorothy table loom (Old Clone of the pattern) so I know I need a warping board for it. I don't want to use the huge 40yd board. I purchased a smaller board, but IDK quite how to apply your technique. It is ~ 20" x 20" with 2 pegs, 11 pegs, 2 pegs, 11 pegs. I'm confused about where I would put the crossovers? I really want to get the "Dorthy" setup to my wishes. The warp on it is ugly/small. Thank you.

[@willowjessicagehman]

wtf is this comment

[@CarlaMDAngelo4646]

Brilliant instructions. Thorough! Thank you!!!

[@ncmagyar]

Do you have a video for using your warping mill?

[@marcelagarciacano630]

what's the maximum lenght you can weave on a table loom? Thank you

[@lila3372]

that'll depend on the thickness of your finished weave and how much of it can fit around the front roller but it's a LOT.

[@HiddenOaksFarm]

I had a stroke & Love Ashford's videos, wish I had bought an Ashford loom. I can't seem to find much from Leclerc Bergere.

[@a234633]

So what to do if your warp is 14 inches I am doing it on turned over tables I would like to get pegs or a board but I know this will not fit on a warping board or maybe I am wrong this will be for a shirt this is only half I will have to do one more I wish I could do it 20 inches but I was told on a backstrap loom this will not work any help would be most appreciated

[@a234633]

So can I use this warping board for backstrap loom can't find any video on it that are clear

[@nareldokumakilim2935]

Hello, how many combos? How many teeth are in 10 cm? Can you teach us the most calculation when we weave?

[@patmay842]

Bonjour comment monte t on cette chaîne ourdie indirectement sur le métier svp

[@rdcmereneetcharline6678]

Elle a fait 2 autres vidéo explicatif pour le transfert. Ils sont aussi détailles que celui-ci

[@patmay842]

@@rdcmereneetcharline6678 merci

[@Khangel]

I've always wanted to learn weaving. I think it might help me if the technical words were spelled out.

[@janemorrow6672]

Have you had a go at any weaving? Can I recommend you start with weaving on a frame loom and learn some of the terminology at a simpler level.

[@nehahimachal2707]

Amazing

[@ogbolephilomena6089]

Good job there. Am from Nigeria, how can I get those books, and how much each?

[@алексейтюрин-ы9о]

уеув\зшогзшгц

[@نصرحامد-ج2ج]

The catalog of the loom is presented in different designs

[@lazerfloyd1729]

If you lose count of how many threads you can just count the groups of 10.

[@SuperViviale]

why you do not make the cross at the and.... sorriso i'm italian i do dot speak english... you can try to explain it to me ? 😊

[@nabreu1]

thank you this is very helpful

[@Reda240]

It is nice......Reda.

[@MarinaVelichkoArt]

Спасибо, отличное видео :)

[@arjohandloomsaree.6838]

Hi❤ii

[@arjohandloomsaree.6838]

I am Indian handloom manufacture

[@melidlopez]

Very helpful thanks

[@veyriegisele2107]

Dommage qu' il n y est pas une vidéo aussi claire que celles que je viens de voir. J ai acheté un métier Pénélope de chez Catusse sans mode d emploi et il existe une vidéo nulle.270euros d achat IMPOSSIBLE de monter les FILS de chaînes.....SOS......

[@中田綾子-o8q]

タクシーーにしゅうれきがなおらないひとなのよ

[@laurarebrova4839]

vot dog

[@ogbolephilomena6089]

Good job there. Am from Nigeria, how can I get those books, and how much each?

[@janemorrow6672]

Ogbole Philomena , have a look on the Ashford website