[ASMR] Sig Sauer SURG Kit Install

[@sigwoarms]

Looking good! That thing felt nice in my hand.

[@InferiorRifles]

@@sigwoarms thanks for letting me use your shop 👍

[@casperligue5.22.7]

Beautiful shoot gun

[@sigwoarms]

@@InferiorRifles You are always welcome!

[@MADMAX839]

EXACTLY what I didn’t know I needed but am glad I found to relax. Thank you.

[@K-bob_45]

How’s it shoot tho

[@epiccowboymemes2042]

Like a sigger

[@Rangedaytheatrics]

Look at it, it doesn't shoot. That's a display

[@epiccowboymemes2042]

@Rangedaytheatrics LMFAO

[@Themuffenthusiast]

Like this!!! Pew, pew, pew!!

[@RighteousJ]

By squeezing the trigger. Obviously.

[@OntheToto]

I like the larue surge suppressor guard design where it’s attached to the hand guard

[@deletdis6173]

I clicked the blue link, and it led to fuckin power strips instead of silencers. Funny af 🤣

[@daviddrago9360]

Been eyeing one for Christmas

[@awdobsession717]

Same!

[@My12521252]

Awesome I've want one of the LaRue SURG

[@trisrenaquino8794]

So its an MCX upper thats been modified to fit an AR15 lower.

[@Annoyingdog37]

Any knowledge on sig csaw builds?

[@InferiorRifles]

@@Annoyingdog37 the required parts aren’t available yet.

[@Annoyingdog37]

@ :(

[@MontanaB]

Happy days. This is nice.

[@taw-dh1st]

Was the non staked castle nut for the video? I hope so....

[@bghiggy]

That suppressor shield looks cool as fuck

[@stingers96]

whats the difference in the handguards?

[@InferiorRifles]

@@stingers96 the wider handguard is necessary when using the suppressor shroud so that lights and lasers don’t get blocked by it

[@brandonb6164]

Who is this for? they cost over 4 grand. It’s neat but the price to performance does not justify this at all.

[@InferiorRifles]

@@brandonb6164 The price for all of the individual components (straight from Sig’s website). It adds up: 11.5’’ Virtus Upper: $2000 SLX556 Suppressor: $1500 Stock Adapter: $100 Virtus Stock: $250 Extra Handguard: $300 Titanium Suppressor Shroud: ??? It’s expensive for sure, but seems about right to me if we’re talking MSRP.

[@LDB670]

I like the suppressor cage look. Should have kept that on. It's what makes the kit unique

[@dlopes4858]

Why did you remove the heat shroud?

[@InferiorRifles]

To demonstrate how it comes off

[@Reapergang505]

Is this for a 5.56 chamber or .300 blackout?

[@kasper_429]

The slim version without the stupid honeycomb suppressor shroud looks SO much better, lol. Helps that it's lighter weight, too. I don't get the requirement for the shroud, most soldiers/operators are wearing gloves like 90% or more of the time anyway, and it's not like they'd be taking the can off a lot, if at all.

[@davesackenheim2937]

556 they are badass, my local gun shop has two of them sitting in there and they've already sold two

[@noControl556]

When ordered does it come as a one-stamper with the assumption that you already have a registered SBR lower by the time you receive it? Or do you have to buy it as a two stamper?

[@InferiorRifles]

@@noControl556 one stamp. You could install it on a pistol lower to keep it that way but I imagine most folks will put it on an SBR lower

[@noControl556]

@@InferiorRifles As I recall the only "constructive intent" case that ever actually got prosecuted was basically this scenario, someone sold a rifle in a package with a short upper but it was all broken down. Granted the actual lower isn't included. My understanding is that you just can't have a collection of parts that has no other plausible configuration than a SBR. IE you can put it on a pistol and keep the stock as long as you have another long gun you could put the stock on etc.

[@InferiorRifles]

@ if you’re worried about that scenario then sell the stock 🤷‍♂️. If you’re not SBR’ing it you won’t need it anyway

[@Dimitri_gaming843]

Best thing to watch, this is better than every ASMR, i will love to see M4 URG-I 14.5 conversion kit... maybe in future? please reply

[@Awhite9514]

That would look great with a radian brown A-DAC Lower receiver

[@michaelcribbin7704]

300blackout???

[@InferiorRifles]

@@michaelcribbin7704 5.56

[@machiavelli_g4458]

How much is that upper?

[@eriks87cam702]

5 grand

[@makevelicustoms]

Cool AF 🤌🏻

[@Enrique_delgado]

Full auto funciona?

[@InferiorRifles]

@@Enrique_delgado testing soon

[@Agent-cu5pv]

Does that kit require a tax stamp for the suppressor???

[@InferiorRifles]

@@Agent-cu5pv every suppressor requires a tax stamp unfortunately

[@awdobsession717]

Maybe not for much longer…

[@Rickseavey84]

Looks amazing, do you think this would fit on a BRN-180s lower? I live in the communist state of WA and cant buy anymore lowers but i have one i need to build out..

[@InferiorRifles]

@@Rickseavey84 it should, but I believe you’ll need to swap the recoil spring endplate for the standard MCX version, the endplate that comes with the SURG kit only works with the Sig stock adapter when mounted to an AR lower. I talk about this in my more detailed breakdown of the SURG kit here: kzbin.info/www/bejne/rIXVpIydgsZ3h6ssi=Rm_J5O2qICUon8Oy

[@erickjosediazfajardo]

eso fue un trabajo de primer nivel en verdad

[@opica7691]

Can someone please explain why you’d want to remove the buffer and spring from the stock? I would expect this would adversely affect how it shoots. Also what about charging the weapon? Typically the bolt carrier would retract back into the stock where the spring resides. Where will it go now? Has the bolt carrier group been adapted for this type of setup?

[@InferiorRifles]

@@opica7691 MCX platforms don’t require a buffer tube.

[@opica7691]

@ Thanks! I just had a look at another video with a breakdown of the bolt group and buffer spring and it makes sense now. I hadn’t seen an MCX platform before.

[@kasper_429]

It's an MCX platform upper. They're piston-driven and have their own recoil spring assembly built into the BCG. No need for a traditional AR-style buffer/spring system because that's only used with DI guns.

[@JOSHKIEHN77]

Site for kit?

[@ktbnate]

Really bro

[@JOSHKIEHN77]

Hey maybe it’s cheaper where it came from, so yes bro really

[@mig1nc]

Man, I want that all tanodized + coyote stock for my MCX.

[@moisesortega123]

Specialist dont miss

[@Faqaroundfindout]

So upper comes like tht, price is ❤

[@grnnrhanes4005]

I think the channel name inferior rifles suits this video well lmao 😂

[@grnnrhanes4005]

It do like how you slimmed it up though get a tan lower and fix back up the dd

[@skif4308]

Можно увидеть как он стреляет?

[@ivaniuk123]

So basically an MCX conversion for the AR.

[@InferiorRifles]

@@ivaniuk123 indeed, that’s the point

[@PureCountryof91]

They always were..

[@DeadlyBreath9790]

It’s easier to purchase weapons upgrade systems than full rifles for a unit

[@awdobsession717]

@@DeadlyBreath9790especially in terms of inventory and manual of arms.

[@armyvet7070]

Let me get that DD upper you tossed out

[@spartanunicorn2770]

Shoulda kept the first handguard on 😂

[@Hiddencomment007]

How similar is this compared to the psa jakl? Obviously, the jokel isn't even on the same level but build wise.

[@eduardolimaargimon5499]

Would that allow to shoot the gun with the butstock folded?

[@InferiorRifles]

@@eduardolimaargimon5499 yes

[@eduardolimaargimon5499]

@InferiorRifles thank you so much. Is it possible to buy this adapter alone? Or just with the kit? While we are at it. Do you know any adapter on the market that allows you to fold the AR15 stock and shoot with it folded that accepts ACR/SCAR/MBT stocks?

[@MaddieLivingston42069]

That honeycomb looks friggin tasty 🤤 #2ABuddy

[@PnP-td1mt]

What’s with that stupid suppressor cage?

[@spartanunicorn2770]

Right? 😂

[@kikou215]

Cela me fait penser au kèkè-boy de chez nous. On met un autoradio et on fabrique la bagnole autour. Là, c'est la même chose mais avec le lower.🤣

[@akmarksman]

SIG made a knock of the PSA JAKL... 😉

[@PnP-td1mt]

PSA made a knock off of the MCX

[@dobbsconnor156]

Change the trigger please

[@InferiorRifles]

@@dobbsconnor156 change the Geissele? Nahhhh

[@GTTClan]

SIG's quality looks amazing 👏🏻 If only we can do cool shit like this in Canada... But we have morons as leaders.

[@BearNecessities-X]

A $4000+ kit? Bruh...

[@normalking83]

$4k!

[@eriks87cam702]

For the price of this thing I’ll just get the cmmg

[@wolfreaperx222]

Looked way better before you swapped out the handguard and took off the suppressor cover. Firearm abuse.

[@wolfreaperx222]

I guess the new HD is better but don't like sacrificing that qd even though a qd mount can easily be added. Still would've kept the suppressor cover though. Thinking about trying that magpul monstrosity. Just ad big as that thing but there's supposed to be no mirage. Wonder how that cover does?

[@tylergarrett4498]

Nice ar18

[@Battlegnome112]

4k……

[@OFFICIALTWI6Y]

No offense but that is definitely 1 way too make a Daniel Defence ugly 😂

[@marshallmann5511]

Color match the lower 🤦🏻‍♂️

[@Overkill06]

ZZZZZZZZZZ

[@Adickted1]

Who does that to a anti seize bottle. Psychopath

[@jnyteshayd8710]

Sooo...an 11ish inch piston driven upper, a suppressor and a stock.....is somehow over $4k. It looks amazing but that is just an idiotic pricetag.

[@azukar2k7]

guilty

[@LIV2500]

Will never stop hating on the sig taper shoulder.

[@InferiorRifles]

@@LIV2500 it’s the best way to mount a direct thread suppressor imo

[@eriks87cam702]

For 5000 dollars they can keep it …

[@SierraMike78]

$4000 WTF over

[@yodaddy82daddy70]

Nice but not no $4500 worth

[@ohongod7344]

Not ASMR

[@ohongod7344]

Good vid tho if there was no back ground noise it would be better