Assembling my Ideal SR20DET!

[@sebastianbunea5174]

You have no idea how much joy it brings me to see that you didn't give up the SR20 engine, while you still use the 1JZ/2JZ's and RB's in the other cars you own. Cannot wait to rebuild mine SR20 in the near future!

[@Alex-vz2jz]

I wish my 240sx came with a SR20, but because their getting hard to find I took the first one I found. So the 240sx I found had a single cam KA24E. So I'm going to LS swap it once my KA breaks down. Why LS because evey other motor is just too expensive. I can build an LS for cheaper then getting an SR20.

[@dylandean7859]

@@Alex-vz2jz once things open back up they will be a little easier to find hopefully

[@doctortitan873]

Same, cant wait to slap a neo head on!

[@darrellh.9680]

“Looks a little phallic, but turned out great!” Good quote for Adam out of context!!! Lol

[@ThreepwoodFan]

Time?

[@SuperCRF150rider]

@@ThreepwoodFan 10:40

[@arcadiagreen150]

@@ThreepwoodFan heh gey

[@jpprind]

Word of advice for taking studs out. Find 2 nuts that fit the threads. Tighten them together and use nut closet to the block to spin the stud out.

[@jordanc6483]

ayy way early gang! adam build a mini truck!

[@synyster_nate]

You and Jimmy could have an off-road mini truck off lol

[@Sekaero]

^Datsun 720

[@HKSTurboBRZ]

He had the K truck build that beast

[@cd5sircoupe]

Well, Adam has two kei trucks. They're most likely just low priority.

[@JostenDooley]

"I'm really regretting not putting this thing on an engine stand and now i'm just working in a puddle of coolant" Thats some rudnik shit there lmao

[@tomar_baap1375]

Adam: Zinc and Vapour honing Tommy: M3 Are we in parallel universe?

[@alexanderrobertson5777]

Fr

[@remar-6]

😂😂

[@nineninesixteensixteen2386]

🤣

[@ikaros4203]

Lmfaooo

[@cd5sircoupe]

Oh man, the driveway jab at Tommy right off the rip got me. Those who know, know.

[@ae86hachi]

I was just about to comment the same thing

[@ProMilkshake]

Onion D’Angelos Del Monte Hangar Grange Arson

[@tomar_baap1375]

Can you please elaborate what happened in the driveway

[@dripforsale6895]

@@tomar_baap1375 Adam Vapor honed Tommy’s head and that’s why he’s bald 👩‍🦲

[@duanebailey6253]

Man that was savage. Heard a guy in CT leaves out sr20s to get stolen. Oof!!!

[@b.rod36]

Who/when is this referencing?

[@dabreal82]

You got an address?

[@Steven_Bo1]

@@b.rod36 first minute of the video bro…

[@b.rod36]

@@Steven_Bo1 Lol, I know that. I meant which guy in CT.

[@jacksonpatrick138]

@@b.rod36 if i’m not mistaken he’s talking about himself when he use to live in ct

[@dustinnewman949]

Adam I just want to say thank you for posting and doing what you do. Your channel and content is unique and extremely entertaining, I appreciate everything you do and feel someone should tell you that!

[@wademann9214]

*everybody liked that!

[@Ren200Z_MotoringLife]

I know my SR in and out been using it with out issues in over 10 years , recently tore it down to inspect it and give it the attention it deserves .. but enjoy seeing other peoples SR content.. good stuff

[@dxkokaho3004]

It’s good to know he’s stopping the never ending bad s15 and he’s repairing it and will potentially give it a name!

[@GlasgowGTR]

Love this SR content Adam! You guys turn these round so fast 🔥☑️

[@alfredocontreras7728]

I missed this content 🤧

[@Onewheelordeal]

Just FYI that gasket sealant makes paper gaskets one time use and disassembly takes some force. Really best reserved for sealing surface damage. As a teen I sprayed a 2 stroke gasket set all at once without realizing they'd be ruined when removing the CVT cover and intake/carb for tuning. Made a bunch more cleaning work too.

[@stussyad]

Hey I just wanna say your my motivation to continue trying to learn how to work on cars I’m a beginning and I was just looking at car videos and I landed on a video of you talking about not knowing much about cars and ppl saying mean things this video was posted 4 years ago and your progression just motivated me to never give up thank you

[@chrisvotour6880]

Love how Adam is going back to the sr20 content

[@CherrySlushi]

That welding clip was an awesome clip. Shout out mike for always getting the crispy shots!

[@rholt7551]

Love the hype you have in the SR. I feel like it’s a dying breed here in the states. I love the rumble a bottom mount manifold gives.

[@123datin]

Love seeing these sr builds! Thinking of putting an sr in the wife’s s13!

[@240sxRule]

Build the KA

[@helplmchoking]

@@240sxRule depends where they're from, outside of the States Silvia's didn't have KA engines. they went from CA18DE/T (actually older, from the S12, but more power than a KA stock and super strong) and halfway through the S13 model went to an SR18 or SR20 for the 180sx and silvia respectively. Depending on your country, SR engines can be dirt cheap since they were in Primera's, Silvias for like 20 years, Pulsars and a few more, but the CA is well worth building and doesn't sound quite as bad as the SR lol

[@240sxRule]

@@helplmchoking No need to explain all that to a 13 year old KZbin account named 240sxrule. I was just guessing he's an American, as Adam, and a majority of his viewers are.

[@dekabwerks]

Adam watching Pete Having a Sr20 moment is so wholesome

[@coreystrong4384]

Looking like a very cool SR Adam. That exhaust manifold looks so different to what we normally see

[@diyu-]

Can't wait for the build to be complete. It's gonna be divine.

[@jimmys_mk8209]

r/woosh

[@TheRoulette77]

Just spent all day with my bitchy s14 zenki.....cuddling and petting her to get her to play nice...rewarded with a working MAF and smashing good run around the block ...AFRs @ 14.7to1!!!! came in sat down after a long hard ,very hot day .....and this ASWOME ALZ video .... thanks Adam you just made my day

[@zkjel125]

Loved the close out music playing over the last bit of of the content instead of after it fades to black. Nice touch Mike!

[@Sauerbrew777]

Loving the SR20 content! I'm still hoping you'll do an SR20 with a VE head. I know you've talked about it and now is the perfect time!!!

[@Matty.Hill_87]

What are the advantages of that?

[@SillyJake6]

It’s Nissan’s vtec sounds absolutely crazy

[@tyco9965]

@@Matty.Hill_87 VVL head. 9000 rpm no problem. Neo VVL is the "vtec" version of Nissan. Basically the cam profiles have two cam lobes, one denote as low cam and the other high cam. When the engine rev reaches a certain point, a solenoid will lock the rocker arm activating the high cam profile. This increases engine air flow capacity giving more power while still retaining torque in low revs with the low cam. Basically An SR. Version of Nissans design. Came in NA sr pulsars, p11, p12 bluebirds.

[@neilr1556]

No rocker issues, biggest plus

[@jonnyjo]

120mph 6000rpm best sound ever 155mph right wheel arch cover keeps coming loose/high way pit stops what a youth I had ! Power keeps on going..

[@bdjoof]

Woah. Never been this early! I miss the old vibes, glad to see its slowly making a come back!

[@JOE_NASTYY]

I’m stoked to hear this sr20. Starting to look so good!

[@lavernslife4713]

Been loving the channel since you graduated from college man keep grinding loving it looking forward too every upload

[@SAMMIT]

Friends don’t let friends use rocker stoppers

[@keeganpock864]

Just curious why you say that?

[@ek_3_3k]

Now thats JDM love right thier world wide! Haha

[@Willon1Wheel]

Anit that the truth!!

[@theedge00123]

Something similar was written in the bass of the bassist from alice in chains on the mtv concert they did...

[@shaunmate7169]

@@keeganpock864 cuase they are garbage

[@michaelmcclernon2610]

Wire wheeling your alternator definitely cleans it up, but it will make it rust. find a direct to metal clear or galvanizing coat to put on it to make it last longer.

[@mikemiller5642]

It's aluminum.

[@michaelmcclernon2610]

Mike Miller My bad. Corrode… it will still oxidate. Regardless still needs a protective coating of sorts.

[@dustinkeez1689]

Dude, I am stoked to hear this thing. That manifold is exciting stuff paired with that G25

[@danzigg08]

Never get bored of an sr build vids

[@jordanpainter7824]

Be carefully with the gasket spray stuff. I used it and it ended up getting into the air, via fans I was running I guess, and I ended up with orange metallic on my freshly paint corrected 996tt. Had to go over it with a clay bar twice then with polish and a foam pad to get it all off

[@CoreysZ32]

thanks for the heads up

[@lukeemmo02]

Very strong boy, love you long time!

[@25thAnnv]

Im not usually early, but since I am here. Adam. I have watched you from saying "you dont wanna be a car duesch" when you were riding bmx before you had a car. All the way to now. I am so happy for you and Collette. I have never seen you so happy and fulfilled. With the dogs, and just talking together.

[@djmystery7235]

I still remember a video where he broke handle bars on his BMX and was absolutely LIVID, it’s crazy how far people get.

[@ardennielsen3761]

I don't even have valve guide seals in the little 4 banger I have, they restrict flow. doesn't need them anyways. but its nice when the replacement gaskets have a bead of silicon already on them.

[@hexsapeddy8616]

God damn it Adam right as I wanted to go back to work you drop a amazing video I NEED to watch😁😁

[@polloxdabollox]

Pete was saying that sr20 needs a dog box 😁🐾

[@BIGGELATO]

This is how I picture Devin Niemela becoming in the next couple of years, let's go dude!

[@9021soul]

Videos like these is what gets me excited

[@anthonyestevez118]

RTV gaskets for the win. I have an SR20DET. They are great. Great content. Thanks for sharing!

[@k1kote]

I love these stress-free Adam videos

[@KeljuKkojootti]

Damn finally, been waiting for this for a while. And again I was early, but still gonna hit like because your videos are always top notch

[@civic9725]

Love the color of the S15 Enginebay

[@weeaunsim4320]

Johan : "very strong boi, very strong boi" LMFAO🤣🤣🤣

[@geocell748]

I want one of those manifold! Would go great with my gtx30 and Tial back housing! 💪💪

[@alecormond686]

lunch time is always the best time watching you!

[@frankwiltucker]

Never enough SR content…. Keep it coming.

[@ryanbuell9153]

Pete the SR20 Technician.

[@ChiefADL]

325kw - 18psi 363kw - 21 psi G25-660 e85 9:1 256/260 2L Full boost with VCT by 3400, built motor, you should be able to get the 550 at the same if not less, and don't have to worry about the rods going on a holiday having a built motor. Currently doing basically the same build on my built motor for my s14 drift car. Would kill to get my hands on that manifold, my high mount stainless is a pain to work on 😒

[@garywayne123]

Glad to see wrenching vids coming back!!

[@corbinyourhero9925]

Him working on a SR20 definitely gives me some serious throw back vibes but this time he knows what he's doing with more confidence😂🤷🏽‍♂️

[@pb4evr]

LZ making KZbin great again

[@braydonmillsap7693]

I seriously love every single video you put out keep up the good content!!!

[@codyj8763]

not trying to sound like a hater but i think this is the first video ive enjoyed in a while.

[@rbs14kouki]

Love that ex manifold . Cant wait to ear it and see dyno result

[@slawek780303]

Great video. I've done what you did here and from my experience it's better to sand blast & powder coat the old parts whenever possible. Buying of the brand new ones and fitting them without a powder coating is kind of a time waste, as these will corrode/oxidise again...

[@PetesCreativeRecycling]

Pete loves SR20s too. @10:14 True statement!

[@derekloyer]

Man that shop has been bright as hell in the last few videos

[@malkuthkethermk3588]

That SR20DET soundss so gooddddd!!

[@DanielMaddux1]

That exhaust manifold needs expansion reliefs between the ports. The CTE difference between the head and the manifold can shear the exhaust studs over time without expansion reliefs

[@chrismocanu2387]

BEST VID ON KZbin!!! KEEP this type of content.

[@Mike02188]

Damn Neu Jdm does fine work. That's got to be like a $1,500+ stock intake manifold!

[@barnesdrb]

I love the SR content. Keep it coming my guy!

[@marcelom17]

Uh, talking about RB25, remember me the R32, damn, what a great piece of kit!!

[@JPel1973]

Wire wheeling your alternator will not hurt it at all! Just make sure you blow it out after you clean it!

[@owenhubbard8286]

Hey Adam you should get the guys to do a tool overview in the new shop! If it ain’t red leave it the shed Milwaukee is the shit.

[@miikeee_e240]

So dope you actually work on your own car (just discovered you recently)

[@SylasG]

Might as well do a Bosch electronic throttle body too it looks a lot cleaner. The 60mm has the same bolt pattern as the oem SR20 throttle. Just need longer bolts.

[@jessaxisa5822]

Should have gotten a Hypertune intake manifold and a Hypertune exhaust manifold, they are from Australia and make top quality parts, you should check them out

[@A.Miata.Enthusiast]

Clicking the link in the description was the best thing that happened to me today 🙂

[@Traxxmaciek]

I did not expect that. That was awesome

[@brettiversen2569]

Love this sr build series 👍

[@fareneksteen7282]

Loving the sr20 build series

[@rtgskullfox]

adam. you really didn't have to rickroll us like that LMAO that made my day.

[@b.roa2366]

You can actually see Adam's enthusiasm and love for SR's. I will not be surprised if he sleeps with one rather than sleeping with Colette

[@garrettnordberg1089]

Brooo I have never clicked soooo fast on a video. Adam I love ur content and I have been watching Colette more and u gotta got a ring on that girl bro and do more videos wit her

[@justinbourguignon3590]

Keep up the good work Adam love your content

[@dewaldgrobler2488]

I'm getting excited to see this sr20 run.

[@jiannibrown1957]

I love how you do your work

[@Manny_J]

Very strong boy 💀 😂😂 very good content guys !

[@kanesthelimits6629]

This raw building motor thing getting to me 😍

[@sethbaldwin6050]

Adam “not gonna go crazy with these builds but ends up vapor honing and zinc coating everything with fresh painted bays” LZ

[@markeggers3832]

Manifold looks dope

[@burgijr522]

The BIO is hilarious !!!!

[@jesseyjacobs9554]

@5:38 I can't weld without it looking like the flu coming out of my nose. A nickel an jbweld is what I would've done. It'd be nice to fab an weld at some point lol

[@drinkingprune6219]

been waiting for this one

[@LozGarage]

*see’s Adam posted a video* Me: *happy* *see’s Johan in the video* Me: *extra happy*

[@cornerhunter32]

King of the bling

[@KaoticEdits]

I love how adam went from BMX to drifting and mechanical stuff lol

[@lunchbox517]

Very strong boy 🤣 keeping it 💯

[@GOGNLC]

I just love the fact ur finally having fun building a car and rattlecannin shit🔥 good old adam

[@bigblackkientgaming8267]

Let's go Adam so amazing to see where you have come. You should jump on car X Drift some time would be mad

[@aaronoosterhoff5449]

you should get an s2000 basically hondas SR20 or silvia if you will, but can always K20 swap too, another good 2L

[@killianoreilly5416]

you guys figured out how to make the barra stang clutch work yet?

[@fonzmeal6165]

miss seeing it rip ^^

[@harrybalzak347]

saw the new manifold looks great its not from Australia though, i would have bought one

[@sedhendo4177]

I hope you do all the same stuff to your rotary

[@timobijnen4434]

I like to use 2 nuts to remove studs. Great video

[@IndianGC]

driveway SR20s makes so much more sense now 😂😂😂

[@callumburton1287]

Good video Adam👍

[@insaynbcr]

Someone needs to teach Adam the double nut trick for removing studs.