Assembly Table Workbench

Today in the Smugglers Room we are adding shop organization combined with a great work surface to the Shop. But not only will this serve as a better place to organize material and tools, but it will add a bit of Sci-Fi magic as we will be giving this bench a Used Universe Look. This will be our Ultimate Sci Fi Assembly Table!
All the Plans for this project can be found on our Patreon Page!
SUPPORT THE SHOW!!!
Enjoying our episodes? Do you want a behind the scenes look and more? Consider supporting us on Patreon and helping us keep all this geeked out shenanigans going!
/ thesmugglersroom
Make sure to Subscribe!!! goo.gl/FpnuFy
You can find us and more of our builds and content below!
www.thesmugglersroom.com/
/ thesmugglersroom
TheSmugglers...
/ smugglerroom
A HUGE Thank You to the Sketch Guy Nevada for providing us with an amazing graphic! You can find more of his awesome work on Facebook and here on KZbin:
Facebook: / sketchyguynv
KZbin: / @sketchyguynv
Some of the Materials we used for this project are listed below. The links below are Amazon affiliate links and will not cost you additional money, however if you use the links it does help support our channel. Thank you!
Electrical Outlet and Switch Supplies
15A 125V Standard Electrical Outlet
amzn.to/2zKyUZm
Leviton Amp 120v Decora Rocker Single-Pole Switch
amzn.to/2zNziXb
Leveling Feet
amzn.to/3f8Nh9V
16" Drawer Slides
amzn.to/2yUrGS4
20" Drawer Slides
amzn.to/2KJKRRe
Mounting Stand-Offs (used on our drawer pulls)
amzn.to/2YjWh6k
Kreg Jig (Pocket Holes)
amzn.to/2z1Olf9
Kreg Pocket Hole Screws - 1 1/4"
amzn.to/3aO7mPp
Kreg Pocket Hole Screws - 1"
amzn.to/3bRY2vq

[@SummersideDiver]

Your attention to design, functionality, and detail is astounding! Thanks for sharing all these videos.

[@ThatGeekyMaker]

Shop infrastructure is always a great project, especially when you "Star Wars" it!

[@TheSmugglersRoom]

So glad you like it, this project was a beast to complete!

[@michaelzajac5284]

Were you watched the Clone Wars?

[@mariemeyer2885]

Best dressed workbench ever!!!

[@TheSmugglersRoom]

Whoooohoooo! We win!! Thanks!

[@ShiryouOni]

Freaking amazing! Can't wait to see the whole garage/shop "Starwarsified".

[@TheSmugglersRoom]

Thank you!!

[@jerrybobteasdale]

That hook where the rulers hang looks like a nice fixture to make band-aids needed.

[@TheSmugglersRoom]

Yep yep, it did have a rubber nub that was installed, but ultimately it was replaced with a less dangerous hook.

[@WinchesterxNL]

See people? Even other people make mistakes in what they're trying to build. You live and you learn. Great build, looking beautiful and functional!

[@TheSmugglersRoom]

Thank you, and you nailed it! We make mistakes on every build, and we will always share what didn't go well in addition to what did!

[@1pcfred]

Whenever you do something some things are not going to be perfect. That's life. Anything over 75% is a passing grade. The important thing is making the attempt. Better luck next time. In general the more you do the better you get.

[@dadams106]

one of the only work tables where it will look better and more like it was intended the more times you hit it

[@TheSmugglersRoom]

LOL!!! Right???? :)

[@The_CAG]

I am totally blown away out the airlock! Creativity and Vision collided into this intergalactic piece of ingenuity. I am just in awe of how fantastic it looks. OUTSTANDING!!

[@fuzzual25]

Thank you so much for that comment! It's really been a labour of love, thank you for watching

[@p.t.benzinger2179]

I enjoy geek builds that are daily practical, nice build

[@TheSmugglersRoom]

Thank you so much, very glad you enjoyed it!

[@jettech1041]

One of the coolest and functional table builds I’ve seen! 🙌 Great job!👏🦾

[@TheSmugglersRoom]

Wow, thank you!

[@stephenbrink3057]

Excellent build Brian! Functional and creative making! If I were an industrial tech teacher I would want to use your videos in my classroom to teach kids to think about science, technology and art!

[@TheSmugglersRoom]

Wow, thank you so much! Very kind of you to say!

[@undeadwiccan]

Wow. This gives me some really good ideas for the desks I've built for my wife and I. We're both fans of yours and of Star Wars but it would surely take on their own lives.

[@TheSmugglersRoom]

Absolutely! We've been wanting to redesign our 'office desk' so that it is more usable, and of course.. more Star Wars! Sounds like a great project!

[@mattkendell1344]

Oh, that looks awesome

[@TheSmugglersRoom]

Much appreciated!!!

[@BronkBuilt]

Very cool assembly table indeed!

[@TheSmugglersRoom]

Thank you much!

[@ScottBourke]

Wonderful and inspirational yet again.

[@TheSmugglersRoom]

Thank you!

[@TheCebulon]

I love your videos! They are a real happy place: The music, your narration and: the Star Wars-ing. So inspiring and happy. Thanks. Greetings from Munich, Tom.

[@TheSmugglersRoom]

Thank you so much for saying so Tom, it really makes our day to hear that you enjoy them! Cheers to you sir!

[@daisamuel]

Absolutely brilliant. Love it.

[@TheSmugglersRoom]

Thank you!!

[@daisamuel]

You’re welcome. I’ve been hooked since I stumbled across this video. Everything looks top end yet you present in a way that makes me think I really can ‘make something outta nothing’. Keep the vids coming.

[@FranksDIY]

The table part was ok. What really opened my eyes was the finishing touches you did. Like the drawer pulls and just over all look of it. Nicely done

[@TheSmugglersRoom]

Thank you! I’m certainly no carpenter so I try to make up for it in the end 🤣. Thanks for watching!

[@knightzcross419]

Every episode amazes me still! Now I have to do this to my workbench! Thanks Brian!!!

[@TheSmugglersRoom]

YES!!!! Can't wait to see your workbench! Thank you for the kind words!

[@bobp5356]

Beautiful job. I really like the way you weather everything.

[@TheSmugglersRoom]

Thank you! So glad you like it!

[@martinez8650]

I love this channel so much. So much I’ve started making my own Star Wars themed wall mounted helmet (red 5, stormtrooper, boba fett) mounts. Thanks for inspiration.

[@TheSmugglersRoom]

That is so awesome to hear, we are so glad you are building!!!

[@blizatrex]

A really great build. It was well worth the wait.

[@TheSmugglersRoom]

Thanks so much Wayne!

[@cashzeigler2596]

this is the coolest project I've seen

[@TheSmugglersRoom]

Wow! Thanks so much!

[@grantpreece9087]

Awesome!

[@TheSmugglersRoom]

Thank you!

[@BenLaurence]

Absolutely fantastic build man! I love all the extra parts and greeblies on the sides, it makes it look SO Star Wars. Love the extra storage space too

[@TheSmugglersRoom]

Glad you like it!

[@rick2bees]

Apart from the amazing build, I liked the idea of the glued on tape measure.... 👍👌🛠

[@TheSmugglersRoom]

Thank you! I thought it would definitely come in handy.

[@RebelMerc]

On that top row of drawers, here is a suggestion or two. There are drawer guides that have longer pull lengths, plus you can make the drawer fronts fold down on the top drawers so you could put in things like stencils and flat things that are long enough to go front to the back of the drawer allowing you to just have to see the front edge to pull out what you need.

[@TheSmugglersRoom]

Thank you so much. I’m definitely going to look at the longer drawer glides. We have shop towels in one with the extras stashed behind, but the stencils for the other are a great idea!

[@Cougar2ei4]

Thank you for sharing this build and using your greebles, I have received mine and they are amazing. They will be added to my current Project. Oh and thank you for responding to my Instagram questions. Keep up the Good Work!

[@TheSmugglersRoom]

Thank you!!! So glad you enjoyed the episode and the greeblies!

[@Alientek2044]

Awesome job

[@TheSmugglersRoom]

Thank you Mike!

[@theholycrafter5065]

I loved the Star wars add-on's, I have always wanted to do something like that with my shop. Great Job.

[@TheSmugglersRoom]

Thank You!

[@RebelBaseBuilds]

Brilliant man, love the multi approach here Star Wars and practical! That drawer front details and greeble work is fantastic!

[@TheSmugglersRoom]

Thank you much my friend, really appreciate it! Can't wait to see your next build on Monday!

[@Dumptheclutchevo]

stumbled across this video, and thought, damn! a whole new world I just discovered! Woodworking, and Sci-fi together! Impressed with the content of this video, and the production quality/presentation, thought to myself, man this guy gotta have a couple hundred thousand subs at least. ONLY 20k??? daaaamn, you'll be blowing up in no time sir!

[@TheSmugglersRoom]

Thank you so much. We really appreciate the kind words and glad you found us!

[@AlienTaskForce]

Super cool project! I love that you took something that is normally mundane and made a statement piece out of it.

[@TheSmugglersRoom]

So glad you liked it!!!

[@markgilder9990]

The detailing is incredible. Great work.

[@TheSmugglersRoom]

Thank you so much!!!

[@joshuatrujillo1888]

Love the graphics!

[@TheSmugglersRoom]

LOL! Thank you my friend!

[@CReevesMakes]

Awesome build Brian! Glad you got to it and it turned out amazing! Thanks for sharing all the steps and information! You dont always need dados and fancy joinery. Sometimes, smart woodworking is simple woodworking! Keep at it man!

[@TheSmugglersRoom]

Hey there!! Thank you so much for stopping by, we absolutely love all that you and your awesome team do! Really appreciate the great comment!

[@arthurdent8091]

Good project, good video & nice sound track.

[@FigmentsMade]

Now that's a workbench! Very cool! And so fitting! I'm hoping my shop starts getting more personality one of these days... Definitely Gonk.

[@TheSmugglersRoom]

YES! I think adding that personal touch to the shop changes how I feel when I am working in there. It adds a little inspiration. Hope you do it too!

[@DarkDioStudio]

I'm sure it was a pain in the ass, but you pull off the most fantastic majestic pieces. You're the bomb diggity Brian!❤️❤️❤️

[@TheSmugglersRoom]

Thank you!!!! It was a loooooooooong project! But we are thrilled with it and very happy you like it!

[@TheSmugglersRoom]

By the way, we are following your awesome Diorama work on FB. Very cool stuff you have made! Carissa was drooling over the Book of the Dead you have posted there. Very cool!

[@DarkDioStudio]

@@TheSmugglersRoom OMG!!!! I am honored! Thank you so very much!! I've been taking a break from any projects. But now that I moved and getting settled, I should be at it soon ❤️❤️❤️

[@sumandl]

thats a badass table!

[@TheSmugglersRoom]

Thank you!

[@LokiJackal]

This is absolutely wonderful. I need a drawing table this way.

[@TheSmugglersRoom]

Thank you!!!!

[@andrewb9590]

Runaway projects? All. The. Time.

[@TheSmugglersRoom]

HA!! Glad I'm not alone!

[@legoman-we2zy]

This really inspired me to greeblie my own table and work area. Thanks.

[@TheSmugglersRoom]

LOL, glad it inspired you!! Good luck with the greeblification process! Obviously we love it! Thanks for watching!

[@talaferrosingleton6965]

Thank you! Brain for this Awesome video!💥😆😁👍🏿

[@TheSmugglersRoom]

Thank you for watching!!

[@craiggehlert]

great project man! thanks for sharing, both the cool and the honest.

[@TheSmugglersRoom]

Thank you! Absolutely. Plenty of good things went great on this project, and also a bunch of things went wrong. All part of the process right?

[@atticus-rex]

So amazing bro! Wish you made panels ready to go like your drawer faces! I'm trying to build an entire transport ship interior for my fan film in my dining room, which will eventually get torn down after shooting.

[@ivangonzales5667]

Really awesome and epic project is a beautiful and dreamed work station and in the Star Wars style!!! 😉 👏👏

[@TheSmugglersRoom]

Very much appreciated Ivan!! Thank you as always for watching!

[@christophersoprano-sculptor]

⭐⭐⭐Excellent work!⭐⭐⭐ . .

[@TheSmugglersRoom]

Much appreciated! Glad you like it!

[@bryanmadewell8896]

Awesome table. Inspired me to build one in the near future.

[@TheSmugglersRoom]

That makes us incredibly happy!!!!

[@GratuitousSets]

Hey Brian! Great vid! - when using the digital angle finder, don't overlap the teeth- they're staggered and won't allow for accurate numbers. Extend the blade and attach the magnetic base only to the flat disc of the blade, then remove the gauge and retract the blade as appropriate. Sorry if this sounds flippant, i'm in a rush 😌

[@TheSmugglersRoom]

Thanks for the tip!

[@sillysausage72]

Awesome build!

[@TheSmugglersRoom]

Thank you, glad you like it!

[@sillysausage72]

@@TheSmugglersRoom You got it! 👍 Btw, I just finished my first little version of Gonk. Is there a way to send you pictures?

[@8arzum]

Wow.. amazin

[@TheSmugglersRoom]

Thank you!

[@scottmemberg]

Once again you impress me with your creativeness! WTG on an awesome Work Area!

[@TheSmugglersRoom]

So much appreciated. Hopefully it gives you some storage ideas!

[@scottmemberg]

@@TheSmugglersRoom of course the last thing in my shop I get to do is storage. I have a "honey-do" list a MILE long!

[@maximusgriffiths4507]

The Greebly assembly table. 😍

[@TheSmugglersRoom]

Much appreciated

[@KyleKatarn145]

I can't believe this channel only has 30k subs, you deserve at least ten times the amount with the high quality stuff you do, and I can't wait to see your growth!

[@TheSmugglersRoom]

Thank you very much!

[@AkselBredahl]

AMAZING, i just sit under the quarantine. Just waiting until something good content shows up, and this is not just good content, it the next level :D

[@TheSmugglersRoom]

LOL, thank you very much for the kind comment!

[@knskumo]

F*cking awesome. Love it!! Plenty of storage and nice ideas.

[@TheSmugglersRoom]

Thanks a ton!

[@iscogblackscale5777]

Nice work bench. And yes I see GNK

[@TheSmugglersRoom]

AWESOME!!! Thank you!

[@antsquirly7654]

I get all droolie when I see all those power tools in action. I'm motivated to clear & organize my catch all enclosed back porch. Thanks. - Are you losing weight?

[@TheSmugglersRoom]

LOL! That's awesome! Get out there and build something! . . . do I look like I'm losing weight? SWEEEEEET!

[@jamesnuxoll7188]

This is the first video of yours I've seen. This is very cool. I applaud your creativity, simplicity, and use of 3-D printing. Your end product looks great.

[@TheSmugglersRoom]

Thank you very much! So glad you enjoyed it

[@JoelMaisonet]

I for sure saw the shape on those Kreg screw boxes! Ended up using two of them on my SW domino table.

[@fuzzual25]

Fantastic use! We'll use them for something for sure, thanks for watching!

[@DBKING04020]

Brian Thompson a couple dominoes and some of the wire cover stuff and you’ve got the legs and feet 😁

[@dawabbitt3079]

One minute (1:21) into the very first video I've ever seen on your channel - and you have a new subscriber! ... Your tone, your animated character and (especially) your videography is awesome - It's like watching a show on cable TV. Great job! - And now, back to your video...

[@TheSmugglersRoom]

Thank you very very much! We are so happy to have you join us!

[@thecraftsman4712]

Clicked Like as soon as I saw the thumbnail. That is fricken awesome.

[@TheSmugglersRoom]

Sweet! Thank you!

[@gusofwind]

hey love the video

[@TheSmugglersRoom]

sweet!!!

[@dfcprops3849]

It's always nice to see a fun workbench made from scratch, but with the greeblies and extra details you added, this is way more interesting! That grey top really stands out and makes it feel not like a workbench and more like a display table. Overall, I'm very impressed with how clean your build is and it has given me some ideas about how to improve my tiny shop. :) I also appreciate your candidness and that you kept the bits in the video about how you had to redo the some things such as the spacing between the drawers. Thanks for keeping it real and continuing to inspire me in my builds!

[@TheSmugglersRoom]

Thank you very much! We try to show all of what goes into the build . . . warts and all!

[@LarkAlrion]

I wish I had the garage space for projects like this. As it is I cab barely turn around in my garage and we don't even park in it. Yay 1950s design.

[@TheSmugglersRoom]

So sorry! That is a real bummer. If it helps, one of my first shops was in a Laundry room . . . it was tight, but I loved every minute of being in there!

[@1pcfred]

Where there's a will there's a way. Work out of a suitcase if you have to. You wouldn't be the first person to do it.

[@samantony7039]

Hello mate,I love it! I wish I could build something like this! It is perfect!

[@TheSmugglersRoom]

Thank you, and I bet you could totally make it. If I can make this . . you can too!!

[@shawnpgorman]

Looks awesome, and if you need to strengthen the drawers down the road, you can countersink some screws into them.

[@TheSmugglersRoom]

Much appreciated Shawn, that's a fantastic tip!!!

[@idiotluggage]

Really great build. You can change your top drawers to have the face pull down. I have a dresser that does it. It could help with the issue you are having.

[@TheSmugglersRoom]

OH DANG!!! Thank you! I had not thought about that, and it's a great idea!!

[@centaur1a]

Love the front decor. Of the drawers. They look soooo retro of the 40’s, 50’s radio. Hey! Why not make a Bluetooth transmitter/receiver with those restraining bolt as the volume and dials too. Oh! Don’t forget the handles too. Another project could a cooler too either as future version or a sailing ships era one too.

[@TheSmugglersRoom]

I love the bluetooth TX/RX idea. That would be a fun project. In ESB Han Solo has a cool device he uses when he is tracking down Luke on Hoth, that would be a cool BlueTooth Radio device!

[@MigMonkey]

This might be the greatest assembly table I've ever seen.. even before it was "Star Wars'd" I built counters on the walls in my shop and honestly they just collect junk, they don't offer the space to work around a project.

[@TheSmugglersRoom]

Thank you!! I’ve always felt that way about counter and various workbenches. They seem to just “collect” stuff, but never really work for building projects.

[@SpencerMoon-rb9nl]

I thought this video was supposed to come out last night , cool table

[@TheSmugglersRoom]

It sure was, we are sorry we missed that release. This project, and the editing took much longer than we planned.

[@HarleyPebley]

Wow! Love the Star Wars styling. Nice upgrade to what would otherwise be a standard shop fixture. Not sure why some people are so anti-pocket holes. They are fast, easy and give a solid joint, particularly if used with glue. You just need to plan a bit so they're not visible.

[@TheSmugglersRoom]

Thank you Harley! Not sure why folks don't like them. I love traditional woodworking joinery as well, but sometimes speed and ease win the day. Guess it depends on what you are working on. Thanks for watching!

[@Quin-te-n]

Love your vids and you always inspire me so pls keep up the good work ;)

[@TheSmugglersRoom]

Awesome! Thank you very much!

[@Quin-te-n]

@@TheSmugglersRoom no thank you your reaction means a lot to me ; )

[@broertriangle5745]

i love your videos. There one of the only things I watch now. and i just found out that my dads friend live next to Harrison Ford

[@TheSmugglersRoom]

Thank you so much! And very cool about Harrison Ford!

[@deusdedithmaranhao2553]

Inverted drawer ... brilliant idea! 😂 😂 😂 But I liked the SW table ... Congratulations.

[@TheSmugglersRoom]

Inverted drawer? 🤔. Glad you like the table! Thanks for watching!

[@DAS-Machina]

You can improve those top drawers with over-travel drawer slides

[@TheSmugglersRoom]

oh yeah! That is a great idea. Thank you very much for that suggestion!

[@l0g1cb0mb]

My Guy, you got Face Hugger behind ya! Might want to get pest control out there! lol

[@cashzeigler2596]

wow

[@adrianfirewalker4183]

Never enough storage!

[@TheSmugglersRoom]

Right???? LOL

[@greghomestead8366]

Just found and subbed your channel. Looking forward to seeing your other videos. Have a Jesus filled day Greg in Michigan

[@TheSmugglersRoom]

Thank you Greg, so glad you joined us!

[@cyberpunk4622]

I was waiting for a droid to pop out of the work table and start sweeping the floor. Fantastic shop table.

[@TheSmugglersRoom]

You and me both!

[@aaronbono4688]

This is a really cool build and I got some great ideas off it. I do wish you had your camera back for a wider angle some of the time as it was a little hard to tell what you were doing. But I still loved this vid. Thanks guys!

[@TheSmugglersRoom]

Thank you much! It was tough to get wiser shots with this build sadly, our shop is pretty tight. But really glad you enjoyed it!

[@austinbrown6401]

Love your videos! Always amazing. What kind of laser cutter do you use to make your laser-cut pieces?

[@diystartupcoach755]

I like your video style. You seem to be talking to a friend all the time

[@TheSmugglersRoom]

Thank you! We are talking to all of you out there!

[@ChrisPage68]

A two-car garage is a massive amount of space, compared with the average one-car garage we have in the UK. 🤦 Blaster burns on the work surface would also look good. I was also wondering if you could get drawer openers where you press the draw and it pops open. That would make it more Star-Warsy (yes, "Star-Warsy" is A Thing!) 🤘

[@TheSmugglersRoom]

Yeah, i do honestly feel like I am very lucky with the space. Love the drawer idea! Thanks!

[@xxxxzorroxxxx]

What stain sealer did you use like what brand for the MDF so I can find at Home Depot or Lowe’s

[@JohnTaylor-qt2xs]

What a wonderful workbench. Looks like you really had fun building it. You’ve given me some great ideas for mine. I noticed at time frame 15:35 you used some metal blocks with holes in them for holding down parts for gluing. Can you tell me what those are called. May want to pick up some. Thanks again and I’ll be watching more of your videos. John

[@TheSmugglersRoom]

Hi John! So glad you enjoyed the build. It was certainly a labor of love, but we are absolutely enjoying it. The blocks you saw are 1-2-3 blocks. They are typically used by metal-smiths, but I saw Bill Doran from Punished Props using them, and we have found sooooooo many great uses for them. Here is a link (it is an affiliate link, but that will not cost you extra, it just helps our channel a bit.) amzn.to/3cEwR7L

[@cynicalrabbit915]

A thought about the many items you'll create to Star Wars - The SR. Any and most decorative touches should have a secondary function of being able to store items whether they be props or supplies (glue, screws, tools or greeblies). This would go a long way towards declutering.

[@TheSmugglersRoom]

Thank you Lowell, that is 100% the plan. We are going to have several more upgrades in the shop that will store items. Additionally in the basement project we are planning storage into many of those elements as well.

[@cynicalrabbit915]

@@TheSmugglersRoom It wasn't that I didn't believe that you HADN'T thought of that concept of making your decorations and props have a secondary and more mundane use. My comment was to get the rest of fandom to also think along those lines. It's easy to get wrapped up in creating something that is visually appealing and end up with a space that becomes overflowing with items that take up that space. Also I would add i novel ways to secure them in keeping with the "Smugglers" theme that these would be good places to "Store" items wouldn't be apparent and catches would automatically be hidden as would the releases. This would automatically make each decoration or prop more interesting and valuable in any sense.

[@waldemarflores519]

Love your work👍🏼 How about some Mando armor for kids? I got my nephews watching your channel and they want me to build them an armor.😳😁

[@TheSmugglersRoom]

Thank you! Kid's Mando would be fun. I think first we are going to need to tackle our adult armor, but I have a nephew that would love a full costume, so perhaps a future episode!

[@magicwrestler86]

Love this build! What are the colors you used? I don’t have a laser cutter but will use your templates and my 3d printer to make something similar for molding.

[@TheSmugglersRoom]

Thank You! The gray color was mixed at Home Depot, Behr paint (Shadow Mountain Gray) and the red-ish color is simply Rustoleum Red Primer with a Satin Rustoleum finish.

[@jspyutube]

Simply awesome! Talk about inspiration colliding with that very timely need for organization, this is perfect! I'm lucky I spotted that shiny metal object on the workroom floor the other day, because the digital caliper I spent 20 minutes looking for was laying right next to it. Oh, and great graphic (Sketchy Guy) and animation and background and design, pacing, etc, etc. BTW, are you going to have a rematch with your wife on... something/anything.... after your defeat with the laptop cases? Ugh. I can't bear to think about it anymore. ;) tough competition.

[@TheSmugglersRoom]

LOL, first off . . . rematch is absolutely coming my friend. We are going to have a DIY Lightsaber Showdown!! And thank you for the comments on the table, so glad you enjoyed it!

[@robb2056]

GONK GONK GOnk gonk gonk....... :) Great video. what table saw do you have. and was there a video of you building it into the work area?

[@TheSmugglersRoom]

Hey there, thank you, glad you liked the build. We have a Ridgid 13 Amp 10" Cast Iron Table Saw, here is a link to it: thd.co/2ZbxJN6. We didn't do a video showing the add to the work area as it was basically just putting it up next to the table and leveling it off. Not a ton of integration . . . yet ;)

[@Craftlngo]

It's an advantage when you can read aurebesh fluently

[@TheSmugglersRoom]

😉

[@armusx]

More fly than Skywalker

[@TheSmugglersRoom]

😂

[@James-hj5ov]

I saw the shape.

[@MadLabGadgets]

This is an awesome project! Would you mind posting a link to those metal stand offs that you owed on the drawer pulls?

[@TheSmugglersRoom]

So sorry, I totally forgot to leave a list. I have added that to the show notes above. I included the standoffs as well as some other goodies. Thanks!

[@MadLabGadgets]

The Smugglers Room thanks for everything that you share!!

[@AJB2K3]

Kreg screws = less exposed surface cleanup.

[@thePunisher95125]

Amazing work. What size is your cutting mat?

[@TheSmugglersRoom]

Thank you! We purchased a cutting mat from Amazon, it's a 36x48" version. Here it the link if you want to check it out:www.amazon.com/gp/product/B0027RS8CG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[@thePunisher95125]

The Smugglers Room thank you.

[@TheTOBroShow]

How did your animate the blueprint portion of the video displaying the build 1:18