Astro Pneumatic Tools Just gave Harbor Freight Icon wrenches a lot of trouble!!

#newtools #astro #wrenches
www.jerseydisc...
Astro Tools 78318 Long Flex Head Nano Socket Ratchet Wrench, Extra Large, Grey
amzn.to/3PSdX3P

[@wswiii3663]

CP you need to change the name of your channel to "Take my Money" because you show some Really useful tools I have to have! Thank you

[@CPthetooladdict]

I like that lol

[@jake-mv5oi]

Love my icons as a DIY. With a gift card and 20% off I got them for under $150. I try not to abuse them, but its good to know if they do break, I can get them warrantied.

[@hgbugalou]

Man you are the only tool channel where I can tell you truly love tools. Keep doing what you are doing.

[@kevinlamarr1424]

Simply the best! He probably can tell you what tools ⚒️ they had on the Nina , Pinta and the Santa Maria.

[@skylerbrycesmith]

The name of his channel is fitting! He is a tool addict and gives out unbiased and real info about tools.

[@CPthetooladdict]

Thank you guys I do really appreciate the support

[@davidwalle5025]

Go job cp. You and Nick are changing the tool community for the better. Keep up the good work

[@mr.charley1507]

I agree, Nailed it!!! I was just about to buy the mountains. still buying them later however. i can wait now.

[@CPthetooladdict]

Thanks, will do!

[@djosbun]

You can never go wrong with an Astro Pneumatic tool. Outside of Lisle they’re the best value in automotive repair tools (in my opinion). Cheers, CP!

[@sonsautomotive]

Astro nano sockets. The 3/8 drive uses a 17mm backing buy a gearwrench xl 17mm flex head wrench.....the astro nano 1/2 drive uses a 22mm backing but the gear wrench xl 22mm flex head wrench and the harbor freight pass thru socket set uses a 19mm backing buy the gearwrench xl 19mm flex head wrench....the pass thru sockets are like owning a infinite deep socket set....

[@josephnavarro3620]

I get all of my tools from Sears, they are great with warranty. I just take the tool in without any proof of purchase and walk out with a new one. It's also conveniently located next to Blockbuster video and I'm usually also returning a VHS tape when I'm out.

[@OTEP1234567891011]

Wonderful video CP. Did you reiterate your problem with the Icon warranty at your local Harbor Freight? What'd they not do for you? What'd they deny and what'd they say was the reason? I've warrantied 4 things that are Icon and haven't had a single problem any time.

[@CPthetooladdict]

Wasn't a warranty issue it was a buying individual sockets to replace in the set.

[@georgeburns7251]

You sure beat around the bush. I forget whatever point you are thinking of making.

[@PapasGarageVA]

I have the Duratech extra long anti slip flex head set, I believe is cost me right about $60 and the only issue I have seen is that the flex head is really tight and when your reaching to a fastener it can be hard to get it to slip on it.

[@joealf4550]

I agree I bought a 1/4 icon flex head and it's locking up I will never buy icon ratchets

[@BOYBROU]

Northern tool sells those same ratchet wrench tools, like the Mountain brand you showed early in the video. Of course it's labeled KLUTCH, for Northern Tool's name brand. However, they sell them individually, not in sets. I bought one at a local Northern tool store that's a 13mm on one side and 15mm on the other. Love that tool, and I also work in a heavy truck International/Navistar dealership. I haven't broken it yet. From what I understand they carry a lifetime warranty. So when I do eventually break it. I should be able to return it to my local Northern Tool and get it replaced. We will see how that turns out. If you have a local Northern tool store near you CP, check it out and let me know what think.

[@kingofkings2934]

If they made a whole set 7-24 with this handle slightly shorter in 6 point i would be in love been dreaming for I while I know Matco and cornwell have something similar but there to short thin and over priced.

[@SaerTurner-wn2qh]

its reversable just put socket in the other side flip wrench lol hehehe like the old snap on and grey Ratchets pop anvil out flip wrench lol

[@johnny4713ify]

Does anyone know of a site that has it in stock? Everywhere I've looked it's out of stock. Thanks

[@craigjorgensen4637]

I was there when the Fisher family started Astro in Los Angeles. They had three air tools to sell! They were good people who treated people right. Irv Fisher’s sons have carried the torch and now they have greatly expanded. Buy with confidence!😊

[@CPthetooladdict]

Thanks for the info

[@checkmate1157]

Once again though ive tried to get a 14 mm nano socket replaced. not warranty i losed it and i cant get my hands on it. that bothers me.

[@MostGenericUser]

I don't like the reversing switch on the mountain wrenches. I find they get switched too easily when trying to use them in tight spaces to get a bolt or nut out.

[@CPthetooladdict]

Very good point!!

[@peterchristlieb]

Ive had a hole in my heart since it was released, JDTCo is already out of stock

[@peterchristlieb]

Finally got mine and it’s outstanding as expected! Hope they come out with the larger version for the 1/2” drive sockets soon

[@matthewdomke6737]

Mac tools in Canada has started selling the mountain wrenches.

[@donmige81]

Icon doesnt waranty single wrenches only sets, so if you loose one of the wrenches and then the other breaks well youre screwed because you cant get it replaced.

[@georgeburns7251]

Duah. Learn to keep track of your tools.

[@TheTate182]

This has been out of stock on jdtco and Amazon forever 😭

[@kevinlamarr1424]

I have the nano sockets but I can sure use the wrench 🔧 thanks

[@kevinlamarr1424]

I bought 2 of the wrenches 🔧 since I’m putting together a truck only set now and the 19 piece metric set. Taking tools from the truck to the car to the house is just plain ridiculous

[@76Starship]

I already have the nano sockets, so that long wrench is gonna be nice. CP, thanks for bringing this new goodie to our attention!

[@paulmendenhall5226]

Have you charged the time of the live streams i haven't seen it show up

[@alfredbernal8603]

Happy Friday CP! 📣WOOOOOOOOO!

[@jonaustin262]

Since when did mountain quit warranting these I have warranted quite a few over the past 8 years from all my dealers and especially since originally I bought ez red versions and Cornwell swapped over to mountain before Cornwell came with there own version I still have somewhere the original version here in the states was sk but that was around 10-12 years ago before they filed bankruptcy

[@miguelmendez4718]

Very informative video, I have the nano sockets and they have save me a couple of times this would be another great option. I have the Carlyle version and warranty them thru Napa no question ask. I wonder if the pin on the flex joint is bigger ? I love that I can use six point socket 👍

[@CPthetooladdict]

Glad it was helpful!

[@104367ct]

I traded my mountain wrenches in for the new Matco set.

[@craigchiddo2794]

I bet a power built ratchet head would swap into the astro handle

[@harrydickson4575]

👍👍👍

[@ronsimmaculatedetailing6335]

I have the matco ones. My deaker has swapped out my 15mm one once and ive had these things for 4 years. I use these 80 percent for alignments.

[@terrellscaife2411]

Your channel will cause me to go into financial debt with all those shiny toys you’re showing everybody

[@JBlair-87]

Man, I feel that comment about “afraid to break it” I have a couple thousand dollars worth of Cornwell stuff in my box I just let sit there , cause I bought it all off eBay , because I’m afraid to break it 😂 And…. I don’t think we have Cornwell trucks near Cincinnati, because I’ve literally never seen one in 15 years 😂

[@CPthetooladdict]

Oh wow!

[@tradesman63]

Glad I already received mine. With your endorsement they will be out of stock for a while.👍

[@CPthetooladdict]

Hope you enjoy it!

[@bobit8742]

holy sh*t, let me go grab this. If they make deep sockets to fit these, it’ll be perfect. Damn you got a lot of tool ❤️

[@zackschwenzer4892]

I have both the 1/2" and 3/8" nano sockets. I was not aware of this wrench, and will be getting it after I am able to make sure that I can use those nano sockets on upper control arm bolts for alignments. Probably get it anyway at $35, but that is what I am most interested in using it for.

[@Balla1309able]

For a DIY not a pro would you recommend husky 3/8” nano or the Quinn 1/2” nano?

[@zackschwenzer4892]

@@Balla1309able If youre comparing between just those two, I'd probably say husky for now. Quinn only has the 1/2" sets right now but its nice to have the choice between 3/8" or 1/2" that husky has. Likely made in the same factory anyway.

[@Balla1309able]

@@zackschwenzer4892 ohh okay, thanks for feedback. Are the 3/8 same size as 1/2? I read a comment where someone said they couldn’t tell them apart but I would think that there is a size difference

[@zackschwenzer4892]

@@Balla1309able The 1/2" drive versions have a larger hex for using a bigger ratcheting wrench on (22mm vs 17mm hex). I have both sets from astro but I haven't actually compared the sockets between themselves. If the 1/2" size is bigger on the socket end, it is by a very small amount.

[@Balla1309able]

@@zackschwenzer4892 thank you I couldn't find much info

[@Richie1gz]

Husky makes the same nano sockets they a good deal

[@danohstoolbox]

I have a set similar to them I got years ago they have no name on them but I have had no issues with them

[@SaerTurner-wn2qh]

LOL I am waiting for teh day you draw a face on your hand and start teh video lol I have a strange mind

[@CPthetooladdict]

Maybe one day

[@Lfr-kp1qb]

I don’t think they sell this anymore

[@SkaarupsAuto]

Are this brand the same as our brand “Hazet” in europe? There stuff look a lot the same🙂

[@CPthetooladdict]

Could be

[@omarmoncloa3415]

I just ordered mine, thanks CP

[@CPthetooladdict]

Enjoy it

[@kevinlamarr1424]

You sold them out again. I may have bought them when you first did the video

[@CPthetooladdict]

Ya astro sucks at restocking them unfortunately

[@WildBill1984]

I bought the tekton dbl flex wrenches recently. Not locking, but pretty nice. Got them on sale too. I had to add some o-rings to tighten them up. I just got this Astro wrench this week, had it on order for a couple weeks. Haven’t used it yet. Hoping it holds up.

[@CPthetooladdict]

Good tip!

[@herblandrum8546]

I bought the monster brand wrenches same as the mountain brand. I got them from my matco guy and I bought from him cause of the warranty hearing mountain wrenches fail a lot. But the monster brand has stood the test of time. I have used every size even the x large 21 22 24 25 ones and haven't broken one yet. Had them 4 years using daily professionally daily all sizes and the spline drive hasn't even worn down. I was iffy at first but they have been life savers. Top 10 grab first tool for sure. Just thought I would put that out there. Have not checked prices recently. But have paid for themselves plenty.

[@PeterB.-sf6pu]

snap on makes wrenches like those mountain wrenches now, set #is XFRRM705-i don’t own it, but its 800.00 and goes from 8/10mm then 12-19mm. i don’t understand why these styles of wrenches are so expensive

[@craigchiddo2794]

Reversible would be nice

[@timflagstad8411]

Glad I bought my set when I did. Never had a problem to date.

[@ericcampbell2360]

These are worth 150 all day

[@craigdave3266]

Are they compatible with gear wrench or Craftsman

[@CPthetooladdict]

Any 6 point hex that's 17mm sure

[@checkmate1157]

Both Astro and mountian and even what i have are the Platinums i believe r the same as mountian wrenches. not so good on there warranty though like u say very handy.

[@CPthetooladdict]

Thanks for the info!

[@MarzNet256]

Cool. I just picked up the long handle 17mm wrench. Also, you can use a 3/8 Ernst twist lock clip to hold the 3/8 nano sockets onto any 17mm box end. Another way is to use a low profile 1/4 to 3/8 adapter to retain the sockets. I've been using them with my Tekton extra long double box end wrench (17x19mm). Finally, on a 3/8 m12 stubby impact they make for a nice, compact setup.

[@davidwells9342]

Awesome I was wondering if there was anything else out there

[@bobkyllo578]

I bought my wrenches through Matco. I love them. They are my go to wrench and I want to say they cost like 150 or so

[@CPthetooladdict]

That's awesome

[@hgbugalou]

35 dollars is a steal for that.

[@philbert8423]

@CP a thanks for that review that’s exactly what I was waiting for my Astro nano sockets as the double boxed end wrench is too short for what I want. Also your reviews are a great reference for guys like me. Jump on the truck for the first time of my life for their new 3 positions slip joint needle nose pliers and I got the 9” needle nose pliers as you suggested they have way less flex than the Knipex which I was also looking at. Keep it up my man it gives us a chance to know what we are getting into when buying! Cheers from up north!

[@pandainkc]

Break loose with a breaker bar not a ratchet. Just sayin.

[@CPthetooladdict]

Okay you don't get it I understand lol

[@DavidWeinberg-cm9xd]

Great job on the Astro wrench, CP? Never got those style wrenches, since spline drive sucks in my opinion? Will easily slip on corroded fasteners? 6 point is my favorite, and with the Nano sockets, a dual purpose set with that wrench?

[@TheSFFV]

I have both and think they are all great. I am not a professional doing it all day. But as a home gamer and someone with experience in the diesal and auto sector this tool in either form is a must. They have saved my butt on lot's of occasions. Ipurchased the Icon's and the astro tools version. I am about to get the new 1/2 ones from HF Quinn. Probably all coming out of the same factory.

[@jonathansherwood5841]

Dang, Nick is already out of stock on those! 🐺🔧

[@larryborkstrom3580]

Looks better deal than mountain wrench

[@JTapia512]

If anyone has the Gearwrench 3/8 pass thru socket set....you can use the Astro nano sockets on the Gearwrench ratchet...part# for the GW ratchet is 893800

[@terrydavis7389]

i have the sockets, now i need to order that wrench.

[@philh9238]

Not show his face In videos anymore?

[@CPthetooladdict]

No need, it's about the tools, not me. im not shallow and conceded

[@VorsprungDurchNik]

I had no idea these existed until I saw this video Sunday morning. My wrench arrived Tuesday and the nano sockets came Wednesday, and they found their way into my socket drawer this morning after a couple of my guys noticed me carrying them into the shop. After checking mine out they both ordered their own. For under $100 you absolutely cannot go wrong! Thanks CP!

[@CPthetooladdict]

That's awesome

[@jayare1338]

They ever offer this in 22mm for the 1/2 set?

[@CPthetooladdict]

Yes I believe so

[@JAERepair]

Glad to hear about this. I have the nano socket set. I've been using a blue point 17mm locking flex head reversible box end wrench (BOERMFLCG17) with an ares (70198) 1/4 to 3/8 impact adapter to lock the sockets onto the wrench. This longer style is definitely a great option.

[@bigg4454]

I found the "Platinum XL" set when I was lookin' for the Mountain set, so I got those. No problems yet and I've had my set for 3 years. I've seen Matco ($300 & up club), Icon ($200 & up club), ATD, K Tool, etc.

[@pico67ss]

They were available under platinum too

[@nonolabs]

The points you dont touch on are the weight and space savings of this tool. Very important to the mobile mechanic.

[@seanshute9284]

Thank you, CP. I've been saying this for a while. Glad to see I'm not the only one. It just makes more sense to me and my wallet. Keep up the great work sir. You're the best.

[@CPthetooladdict]

Very welcome

[@davies3171]

👍

[@PhillipDrumz]

I wish Amazon or Astro would get the 78318 in stock!

[@timwindsor03]

Awesome video brother. Thanks for sharing. Keep the content coming. Hope you have an incredible weekend. Love ya bro

[@CPthetooladdict]

Thanks! You too!

[@1pieman]

👍😎👍

[@DD-gd3fr]

I have to Thank you for saving me a whole bunch of money, I was going to buy the Icons long flex . I ordered both the wrench and sockets. GREAT TIP! Thanks for al your help. I have subscribed

[@CPthetooladdict]

Glad I could help

[@rlenoxIII]

The tools don’t make the technician, the Technician makes the tools they have work

[@CPthetooladdict]

Wrong with new computers and modules you need the tools tell me how you program a pcm without tools smart guy?

[@rlenoxIII]

@@CPthetooladdict I apologize if I wasn’t clear. My point was that the best tools in the world do not make you a good technician. You’ve been at this a long time CP, how many times have you seen a mechanic go down the parts trail because they got a P2195. After replacing the O2 sensor, cleaning injectors (maybe even replace them), and fuel filter, they stumbled upon the leaking intake manifold, or the shorted wire they should have check for to begin with. That was the point I was trying to make.

[@Vacman0331]

You are just hating on Harbor Freight. Kabo Tool Company puts out the "Mountain" wrenches also under Platinum, ATD, K=Tool, Kabo, Carlisle, either Mac or Matco and more. I don't want the Astro wrenches and I like Astro products.

[@CPthetooladdict]

Angry little troll, I'm glad I hurt your feelings snowflake lmao

[@michaels2251]

Thanks for the video! Just ordered astro wrench myself. Just curious have you had a chance to break free a stubborn bolt yet with it? Curious how it holds up to that. Thanks

[@CPthetooladdict]

Yes I did

[@boosted2.4_sky]

3:43..K-Tool..☝️

[@CPthetooladdict]

That's the one!!

[@luisz5443]

Very nice.. any word when they are going to have the 1/2 ratchet for the nano sockets? Definitely can't wait for it.. thank you CP

[@CPthetooladdict]

Not sure yet

[@ToolDemos]

Great idea, cheaper AND more durable.

[@CPthetooladdict]

Glad you like it!

[@GerardoVw1]

My Mac guy warranties the mountain wrenches I bought when they first came out as monster wrenches.

[@craigjorgensen4637]

He may stop,doing this when they get kicked back to him!

[@GerardoVw1]

@@craigjorgensen4637 they didn’t, it’s been years and he hasn’t told me anything.

[@joshbennett5335]

I break a icon one probably about once a month and they give me a new wrench or I can bring the whole set in and get all new set

[@joshbennett5335]

With no questions asked and I done that at three different harbor freights

[@syddd3642]

I need a set of them ive been looking at the icon for warranty reasons but they are over 2 hundred

[@shepherdsfleetservicesllc8147]

Good video

[@CPthetooladdict]

Thanks for the visit

[@shepherdsfleetservicesllc8147]

@@CPthetooladdict your welcome

[@BadgerBlase]

The brand of mine is Platinum. Used on eBay years ago for I want to say 100$. Identical to mountain.

[@CPthetooladdict]

What's this have to do with the astro nano wrench besides your selfish comment?

[@BadgerBlase]

@@CPthetooladdict nah man I’m just throwing another brand out there that makes the same product…. I’m hoping your being sarcastic but I can’t tell. I did just picked up the nanos last week(not the ratchet as I didn’t know anything about it until this video) along with that Cal-Van C Clamp press you just highlighted. I’m pretty stoked to receive them.

[@marko11kram]

food for thought

[@harveysmith100]

Just bought the Mountain after years of looking at them. Finally saw a bargain and went for them. I do like the Astro CP but you have to understand, I am an idiot. I will back myself into a corner. I made a decision a few years ago to never own ratcheting wrenches that don't reverse. It is like insurance for idiots. I am now looking at the Williams flex head reversible, they are the ones branded by Blue Point. Really nice, especially the six point. Love the channel CP and that is a great recommendation, especially for the 17mm and above sizes. But speaking for all idiots, I will have to stay with the reversible Mountain.

[@ramiropreciado-gallardo98]

I had the Matco ones and sold them. Had one with a 12 point side and a 6 point side. I own the snap on ones.

[@dariusjonsson2358]

i have a set of the icon double end wrenches. i love them but the spline drive gets stuck and its annoying when its in tight spot

[@MegaSuperfatguy]

Husky has identical low profile impact sockets. I got them months ago and they've been very hand in the full time small engine work. They've even got the recess in them for the retainer clip. Looks like I know what my next ratchet will be.

[@CPthetooladdict]

Astro has been out for years not months

[@MegaSuperfatguy]

@@CPthetooladdict I'm well aware and was not trying to imply that Astro is copying Husky. I'm saying Husky has an identical set of sockets that looks like they will work with the Astro ratchet.

[@paulmendenhall5226]

Looks like a quality wrench

[@offthestreetsandinthecreek7294]

I bought a set for pretty cheap at Tech Choice Tools

[@CPthetooladdict]

Nice! I don't buy from him or deal with him he's doing some sketch things.

[@PhillipDrumz]

I wish this Astro wrench was in stock!

[@thomasperina2990]

Good Evening All Toolhaulics: CP thank you for the heads up on the Mountain spline wrenches 🔧. I guess I've been lucky since my set has worked fine for years but I did not know that they were not warretyable if they failed. God Bless you and my best to Henry. TMP from N.J

[@CPthetooladdict]

Our pleasure!

[@timothyhalm20]

CP... Did you know you can get some Knipex pliers at LOWES? Look in the Electrical tools rather than in regular tool area. At least in my store, that's where they are, electrical.

[@craigjorgensen4637]

Mountain SHOULDNT warranty them! Keep the prices low and eliminate the “Warranty people” who can and will abuse anything! All companies should do this !

[@CPthetooladdict]

You must be burned up bud!! Meth is bad!

[@vicktorpatriot1430]

​@@CPthetooladdict especially when mixed with LSD ,

[@craigjorgensen4637]

I can see his point! When people in these forum do nothing but talk about warranties, I immediately know they are tool abusers. Those Mountain wrenches are so long that it would be so easy to tear those gears out of them because of the tremendous leverage a heavy handed person could put on them. Why not break it if I can get a free replacement?

[@craigjorgensen4637]

@@CPthetooladdictDone with you!

[@portugeseking7959]

Yeah I got mine from icon. They work great.

[@CPthetooladdict]

Good to know!